Electroosmotic pump‐supported molecularly imprinted monolithic column for capillary chromatographic separation of nitrophenol isomers

In this work, a novel molecularly imprinted polymer (MIP) monolithic column with integrated in‐column electroosmotic pump (EOP) was designed and successfully prepared to facilitate the capillary chromatography with MIP column. A silica‐based EOP was synthesized at the detection end of the MIP monolithic capillary column by so‐gel to provide the hydrodynamic driven force for the capillary chromatography. Because of large surface area and low fluidic resistance of the silica monolith,a strong and steady EOF was generated by silica‐based EOP, indicating that the EOP was quite compatible with MIP capillary column. With the sufficient EOF provided by EOP, the electro‐driven based capillary chromatographic separation of nitrophenol isomers was achieved in 4‐vinylpyridine‐based MIP monolithic capillary, which was originally proved infeasible because of the EOF shortage. No significant influence upon the specific recognition of the MIP was found due to the setting of EOP after the detection window of the column. The influence of experimental parameters on the EOF such as voltage and pH value of running buffer was investigated. The column was also evaluated by capillary liquid chromatographic mode to compare with EOP‐driven capillary chromatography. Higher column efficiency was obtained by EOP‐driven separation with improved peak shape. The results suggested that EOP‐supported technique would be a good way to solve the problem of weak EOF generation in electro‐driven capillary chromatography.     

Production of ROS by photosensitized anthracene under sunlight and UV-R at ambient environmental intensities

The aim of this study was to analyze the photostability and phototoxicity mechanism of anthracene (ANT) in a human skin epidermal cell line (HaCaT) at ambient environmental intensities of sunlight/UV‐R (UV‐A and UV‐B). Photomodification of ANT under sunlight/UV‐R exposure produced two photoproducts, anthrone and 9,10 anthracenedione. Generation of ¹O₂, O₂^?? and ^?OH was measured under UV‐R/sunlight exposure. Involvement of reactive oxygen species (ROS) was further substantiated by their quenching with free radical quenchers. Photodegradation of 2‐deoxyguanosine and linoleic acid peroxidation showed that ROS were mainly responsible for ANT phototoxicity. ANT generates significant amount of intracellular ROS in cell line. Maximum cell viability (85%) was reduced under sunlight exposure (30 min). Results of MTT assay accord NRU assay. ANT (0.01 μg mL^?1) induced cell‐cycle arrest at G1 phase. RT‐PCR demonstrated constitutive inducible mRNA expression of CYP 1A1 and 1B1 genes. Photosensitive ANT upregulates CYP 1A1 (2.2‐folds) and 1B1 (4.1‐folds) genes. Thus, the study suggests that ROS and DNA damage were mainly responsible for ANT phototoxicity. ANT exposure may be deleterious to human health at ambient environmental intensities reaching the earth’s surface through sunlight.     

Programmed Locomotion of an Active Gel Driven by Spiral Waves

Active media that host spiral waves can display complex modes of locomotion driven by the dynamics of those waves. We use a model of a photosensitive stimulus‐responsive gel that supports the propagation of spiral chemical waves to study locomotive transition and programmed locomotion. The mode transition between circular and toroidal locomotion results from the onset of spiral tip meandering that arises via a secondary Hopf bifurcation as the level of illumination is increased. This dynamic instability of the system introduces a second circular locomotion with a small diameter caused by tip meandering. The original circular locomotion with large diameter is driven by the push‐pull asymmetry of the wavefront and waveback of the simple spiral waves initiated at one corner of gel. By harnessing this mode transition of the gel locomotion via coded illumination, we design programmable pathways of nature‐inspired angular locomotion of the gel.     

A Molecular‐Level Study of Metamorphosis and Strengthening of Gels by Spontaneous Polymorphic Transitions

Many weak gels often undergo spontaneous transformation to form a stronger gel upon aging. Herein, the molecular‐level changes that occur during the transformation of a weak gel into a strong gel are shown by using various time‐dependent techniques. Diol 1 forms a metastable transparent gel (TG) in a mixture of CH₂Cl₂/hexane and undergoes a fast transition to an opaque gel (OG) accompanied by gradual strengthening of the gel, as evidenced from time‐dependent T_gel and rheology studies. Differential scanning calorimetry and thermogravimetric analyses suggest that these two gels correspond to two different polymorphs. By using FTIR spectroscopy and powder XRD experiments, it is shown that the TG‐containing kinetic polymorph, with weakly hydrogen‐bonded self‐assembly, spontaneously changes into the OG containing a strongly hydrogen‐bonded stable polymorph and this leads to strengthening of the gel and metamorphosis. Time‐dependent IR studies prove the gradual change in hydrogen‐bonding pattern. This is the first molecular‐level study of polymorphic transitions in gels.     

Autonomous conveyer gel driven by frontal polymerization

Autonomous mechanical mass transportation for cargos on the microscale with no need of continuous external powering is of great scientific and technological interest due to their extensive applications. However, it is still challenging to create a self‐driven system applicable to diverse micromaterial transportation demands. In this work, we developed a novel autonomous conveyer gel driven by frontal polymerization (FP). The chemical wave produced in FP was stable, and self‐propagating with a constant velocity, which can be easily monitored by thermal imaging or fluorescence labeling. We investigated the influence of the initiation temperature, swelling ratio of the gel substrate, and the size of the cargos on the motion of driven behavior. Results showed that the driving velocity can be well controlled by altering the initiation temperatures of FP. The swelling ratio and the size of the cargos had a key impact on the feasibility of self‐driven behavior. In addition, powerful driven capability by FP was demonstrated by successfully transporting cargos in series, and further applied for targeted synthesis of CdS nanocrystals. The methodology developed here provides an effective way to convert chemical energy to mechanical work, and may be useful in energy conversion and utilization, mass transportation and other applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1323‐1331     

Recent Advances in Self‐Oscillating Polymer Material Systems

In 1996, we first reported self‐oscillating polymer gels exhibiting autonomous swelling‐deswelling oscillations driven by the Belousov‐Zhabotinsky reaction. In contrast to conventional stimuli‐responsive gels, the self‐oscillating gel can autonomously and periodically change its volume in a closed solution without any external stimuli. Since the first report, the novel concept of self‐oscillating gels has been expanded into various polymer and gel systems. Herein, we summarize recent advances in self‐oscillating polymers and gels.     

Mechanical Reinforcement of Molecular Hydrogel by Co‐assembly of Short Peptide‐based Gelators with Different Aromatic Capping Groups

We demonstrated in this study that mixing two short peptide‐based gelators with different aromatic capping groups would result in molecular hydrogels with enhanced mechanical property. We selected gelators of PTZ‐GFFY and Nap‐GFFY for the study. Both PTZ‐GFFY and Nap‐GFFY could independently form molecular hydrogel by a heating‐cooling process. However, the mechanical property of gels of PTZ‐GFFY and Nap‐GFFY was relatively weak with storage moduli (G′) of about 500 and 150 Pa, respectively. A two‐component gel of PTZ‐GFFY and Nap‐GFFY could also form by a heating‐cooling process. Surprisingly, the G′ value of the two‐component gel was about 5000 Pa , which was at least ten times bigger than that of each single‐component gel. This is a novel and simple strategy to improve the mechanical property of molecular hydrogels.     

A novel donor–donor polymeric dyad of Poly(3‐hexylthiophene‐block‐oligo(anthracene‐9,10‐diyl): Synthesis,solid‐state packing,and electronic properties

A new polymeric dyad of oligo‐anthracene‐block‐poly(3‐hexylthiophene) (Oligo‐ANT‐b‐P3HT) has been synthesized as a donor–donor dyad building block for organic photovoltaics. The polymer dyad and oligomer of anthracene‐9,10‐diyl (Oligo‐ANT) are prepared by Grignard Metathesis. The higher order of crystallinity and molecular chains ordering at solid phase reveal the intrinsic optical and electrical properties of polymeric dyad resulting in relatively higher light harvesting ability compared to the oligo(anthracene‐9,10‐diyl). The UV‐visible spectrum of (Oligo‐ANT‐b‐P3HT) in solution shows broad absorption with two sets of absorption from both anthracene and thiophene core units, covering a wide range of the visible spectrum. The test devices of the blends of polymeric dyad with fullerene C₆₁ (PCBM) show improved photovoltaic performance with a power conversion efficiency of 3.26% upon subjecting to pre‐fabrication thermal treatments. With optimized morphology of the interpenetrating network and the shorter fluorescence lifetime of the annealed dyad/PCBM blends, the effective charge transfer from the donor dyad to PCBM has evidenced. Thus, these studies will allow further synthetic advances to make potential high crystalline polymeric dyads with significantly improved light harvesting capability. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3032–3045     

Hyaluronic acid‐poly(vinyl alcohol) composite cryo‐gel for biofunctional material application

Recently, applications of hyaluronic acid (HA) as a biomaterial were investigated. However, the weak structure of HA gel and the effects of using cross‐linker raised concerns during in vivo resolution. In this study, we investigated the method to solve these two problems using physical cross‐linking and compositing with poly(vinyl alcohol) (PVA). Various weight ratios of HA and PVA solutions were mixed, adjustment of pH to 1.8 using HCl then used to fabricate HA‐PVA cryo‐gel by freezing‐thawing. Young's modulus of the prepared gel rose with the increase of both HA and PVA concentrations or either one of them. We estimated that HA and PVA have exhibited these mechanical properties due to forming a double network. HA‐PVA gel showed kinetic friction force of approximately 10 times of PVA gel, while water contact angle and protein adsorption of HA‐PVA gels were remarkably decreased. The properties of the prepared gel suggest that it can be used for postoperative adhesion prevention applications.     

Access to Metastable Gel States Using Seeded Self‐Assembly of Low‐Molecular‐Weight Gelators

Here we report on how metastable supramolecular gels can be formed through seeded self‐assembly of multicomponent gelators. Hydrazone‐based gelators decorated with non‐ionic and anionic groups are formed in situ from hydrazide and aldehyde building blocks, and lead through multiple self‐sorting processes to the formation of heterogeneous gels approaching thermodynamic equilibrium. Interestingly, the addition of seeds composing of oligomers of gelators bypasses the self‐sorting processes and accelerates the self‐assembly along a kinetically favored pathway, resulting in homogeneous gels of which the network morphologies and gel stiffness are markedly different from the thermodynamically more stable gel products. Importantly, over time, these metastable homogeneous gel networks are capable of converting into the thermodynamically more stable state. This seeding‐driven formation of out‐of‐equilibrium supramolecular structures is expected to serve as a simple approach towards functional materials with pathway‐dependent properties.     

Adsorption of Polycyclic Aromatic Hydrocarbons on Graphene Oxides and Reduced Graphene Oxides

Graphene has attracted increasing attention in multidisciplinary studies because of its unique physical and chemical properties. Herein, the adsorption of polycyclic aromatic hydrocarbons (PAHs), such as naphthalene (NAP), anthracene (ANT), and pyrene (PYR), on reduced graphene oxides (rGOs) and graphene oxides (GOs) as a function of pH, humic acid (HA), and temperature were elucidated by means of a batch technique. For comparison, nonpolar and nonporous graphite were also employed in this study. The increasing of pH from 2 to 11 did not influence the adsorption of PAHs on rGOs, whereas the suppressed adsorption of NAP on rGOs was observed both in the presence of HA and under high‐temperature conditions. Adsorption isotherms of PAHs on rGOs were in accordance with the Polanyi–Dubinin–Ashtahhov (PDA) model, providing evidence that pore filling and flat surface adsorption were involved. The saturated adsorbed capacities (in mmol g^?1) of rGOs for PAHs calculated from the PDA model significantly decreased in the order of NAP>PYR>ANT, which was comparable to the results of theoretical calculations. The pore‐filling mechanism dominates the adsorption of NAP on rGOs, but the adsorption mechanisms of ANT and PYR on rGOs are flat surface adsorption.     

Strong Emissive Nanofibers of Organogels for the Detection of Volatile Acid Vapors

Two L ‐phenylalanine derivatives with 5,8‐bis(2‐(carbazol‐3‐yl)vinyl)quinoxaline ( PCQ ) and 5,8‐bis[2‐(carbazol‐3‐yl)]‐2,3‐dimethylquinoxaline ( DCQ ) as fluorophores were synthesized, and their photophysical properties were measured and compared. The two compounds were found to gelate some organic solvents and self‐assemble into 1D nanofibers in gels. The wet gel of PCQ emitted a weak orange fluorescence, but the DCQ gel had a strong green one. This result can be due to the presence of two methyl groups and the nonplanar conformation of fluorophore in DCQ . The gel film of DCQ also showed significantly stronger fluorescence than that of PCQ . Thus, the wet gel and xerogel film of DCQ were selected to study their sensing properties to acids. The yellow wet gel of DCQ transformed into a brown sol upon the addition of 0.2 equiv trifluoroacetic acid (TFA), accompanied by emission quenching. The xerogel film of DCQ rapidly responded to volatile acids, such as TFA, HCl, and HOAc. The fluorescence of the xerogel film was gradually quenched with increased concentration of volatile acid vapors. The fibrous film exhibited low detection limits for volatile acid. The detection limits of the thin films for TFA, HCl, and HOAc reached 43, 122, and 950 ppb, respectively.     

Fluorogenic Ag+–Tetrazolate Aggregation Enables Efficient Fluorescent Biological Silver Staining

Silver staining, which exploits the special bioaffinity and the chromogenic reduction of silver ions, is an indispensable visualization method in biology. It is a most popular method for in‐gel protein detection. However, it is limited by run‐to‐run variability, background staining, inability for protein quantification, and limited compatibility with mass spectroscopic (MS) analysis; limitations that are largely attributed to the tricky chromogenic visualization. Herein, we reported a novel water‐soluble fluorogenic Ag⁺ probe, the sensing mechanism of which is based on an aggregation‐induced emission (AIE) process driven by tetrazolate‐Ag⁺ interactions. The fluorogenic sensing can substitute the chromogenic reaction, leading to a new fluorescence silver staining method. This new staining method offers sensitive detection of total proteins in polyacrylamide gels with a broad linear dynamic range and robust operations that rival the silver nitrate stain and the best fluorescent stains.     

Chemically Fueled Dissipative Self‐Assembly that Exploits Cooperative Catalysis

In living systems, dissipative processes are driven by the endergonic hydrolysis of chemical fuels such as nucleoside triphosphates. Now, through a simple model system, a transient self‐assembled state is realized by utilizing the catalytic effect of histidine on the formation and breaking of ester bonds. First, histidine facilitates the ester bond formation, which then rapidly co‐assembles to form a self‐supporting gel. An out‐of‐equilibrium state is realized owing to the cooperative catalysis by the proximal histidines in the assembled state, driving the second pathway and resulting in disassembly to sol. Cooperative effects that use the dual role of imidazoles as nucleophile and as proton donor is utilized to achieve transient assemblies. This simple system mimics the structural journey seen in microtubule formation where the substrate GTP facilitates the non‐covalent assembly and triggers a cooperative catalytic process, leading to substrate hydrolysis and subsequent disassembly.     

Multiple Keys for a Single Lock: The Unusual Structural Plasticity of the Nucleotidyltransferase (4′)/Kanamycin Complex

The most common mode of bacterial resistance to aminoglycoside antibiotics is the enzyme‐catalysed chemical modification of the drug. Over the last two decades, significant efforts in medicinal chemistry have been focused on the design of non‐ inactivable antibiotics. Unfortunately, this strategy has met with limited success on account of the remarkably wide substrate specificity of aminoglycoside‐modifying enzymes. To understand the mechanisms behind substrate promiscuity, we have performed a comprehensive experimental and theoretical analysis of the molecular‐recognition processes that lead to antibiotic inactivation by Staphylococcus aureus nucleotidyltransferase 4′(ANT(4′)), a clinically relevant protein. According to our results, the ability of this enzyme to inactivate structurally diverse polycationic molecules relies on three specific features of the catalytic region. First, the dominant role of electrostatics in aminoglycoside recognition, in combination with the significant extension of the enzyme anionic regions, confers to the protein/antibiotic complex a highly dynamic character. The motion deduced for the bound antibiotic seem to be essential for the enzyme action and probably provide a mechanism to explore alternative drug inactivation modes. Second, the nucleotide recognition is exclusively mediated by the inorganic fragment. In fact, even inorganic triphosphate can be employed as a substrate. Third, ANT(4′) seems to be equipped with a duplicated basic catalyst that is able to promote drug inactivation through different reactive geometries. This particular combination of features explains the enzyme versatility and renders the design of non‐inactivable derivatives a challenging task.     

On‐chip pressure generation using a gel membrane fabricated outside of the microfluidic network

On‐chip generation of pressure gradients via electrokinetic means can offer several advantages to microfluidic assay design and operation in a variety of applications. In this article, we describe a simple approach to realizing this capability by employing a polyacrylamide‐based gel structure fabricated within a fluid reservoir located at the terminating end of a microchannel. Application of an electric field across this membrane has been shown to block a majority of the electroosmotic flow generated within the open duct yielding a high pressure at the channel–membrane junction. Experiments show the realization of higher pressure‐driven velocities in an electric field‐free separation channel integrated to the micropump with this design compared to other similar micropumps described in the literature. In addition, the noted velocity was found to be less sensitive to the extent of Debye layer overlap in the channel network, and therefore more impressive when working with background electrolytes having higher ionic strengths. With the current system, pressure‐driven velocities up to 3.6 mm/s were realized in a 300‐nm‐deep separation channel applying a maximum voltage of 3 kV at a channel terminal. To demonstrate the separative performance of our device, a nanofluidic pressure‐driven ion‐chromatographic analysis was subsequently implemented that relied on the slower migration of cationic analytes relative to the neutral and anionic ones in the separation channel likely due to their strong electrostatic interaction with the channel surface charges. A mixture of amino acids was thus separated with resolutions greater than those reported by our group for a similar analysis previously.     

Stiff,Multistimuli‐Responsive Supramolecular Hydrogels as Unique Molds for 2D/3D Microarchitectures of Live Cells

Supramolecular hydrogels constructed through molecular self‐assembly of small molecules have unique stimuli‐responsive properties; however, they are mechanically weak in general, relative to conventional polymer gels. Very recently, we developed a zwitterionic amino acid tethered amphiphilic molecule 1 , which gave rise to a remarkably stiff hydrogel comparable with polymer‐based agarose gel, retaining reversible thermal‐responsive properties. In this study, we describe that rational accumulation of multiple and orthogonal noncovalent interactions in the supramolecular nanofibers of 1 played crucial roles not only in the mechanical reinforcement but also in the multistimuli responsiveness. That is, the zwitterionic amino acid moiety and the C C double bond unit of the hydrogelator 1 can function as a pH‐responsive unit and a light‐responsive unit, respectively. We also demonstrated that this stiff and multistimuli‐responsive supramolecular hydrogel 1 is applied as a unique mold for 2D and 3D‐patterning of various substances. More significantly, we succeeded in the fabrication of a collagen gel for spatial patterning, culturing, and differentiation of live cells by using hydrogel 1 molds equipped with 2D/3D microspace channels (100–200 μm in diameter).     

Multiple Sol‐Gel Transitions of PEG‐PCL‐PEG Triblock Copolymer Aqueous Solution

An aqueous solution of a poly(ethylene glycol)‐polycaprolactone‐poly(ethylene glycol) (PEG‐PCL‐PEG) with a composition of EG₁₃CL₂₃EG₁₃ undergoes multiple transitions, from sol‐to‐gel (hard gel)‐to‐sol‐to‐gel (soft gel)‐to‐sol, in the concentration range 20.0∼35.0 wt.‐%. Through dynamic mechanical analysis, UV‐vis spectrophotometry, small angle X‐ray scattering, differential scanning calorimetry, microcalorimetry and ¹³C NMR spectroscopy, the mechanism of these transitions was investigated. The hard gel and soft gel are distinguished by the crystalline and amorphous state of the PCL. The extent of PEG dehydration and the molecular motion of each block also played a critical role in the multiple transitions. This paper suggests a new mechanism for these multiple transitions driven by temperature changes.

     

Hydrogen‐Bonding Induced Alternate Stacking of Donor (D) and Acceptor (A) Chromophores and their Supramolecular Switching to Segregated States

This paper reports comprehensive studies on the mixed assembly of bis‐(trialkoxybenzamide)‐functionalized dialkoxynaphthalene (DAN) donors and naphthalene‐diimide (NDI) acceptors due the cooperative effects of hydrogen bonding, charge‐transfer (CT) interactions, and solvophobic effects. A series of DAN as well as NDI building blocks have been examined (wherein the relative distance between the two amide groups in a particular chromophore is the variable structural parameter) to understand the structure‐dependent variation in mode of supramolecular assembly and morphology (organogel, reverse vesicle, etc.) of the self‐assembled material. Interestingly, it was observed that when the amide functionalities are introduced to enhance the self‐assembly propensity, the mode of co‐assembly among the DAN and NDI chromophores no longer remained trivial and was dictated by a relatively stronger hydrogen‐bonding interaction instead of a weak CT interaction. Consequently, in a highly non‐polar solvent like methylcyclohexane (MCH), although kinetically controlled CT‐gelation was initially noticed, within a few hours the system sacrificed the CT‐interaction and switched over to the more stable self‐sorted gel to maximize the gain in enthalpy from the hydrogen‐bonding interaction. In contrast, in a relatively less non‐polar solvent such as tetrachloroethylene (TCE), in which the strength of hydrogen bonding is inherently weak, the contribution of the CT interaction also had to be accounted for along with hydrogen bonding leading to a stable CT‐state in the gel or solution phase. The stability and morphology of the CT complex and rate of supramolecular switching (from CT to segregated state) were found to be greatly influenced by subtle structural variation of the building blocks, solvent polarity, and the DAN/NDI ratio. For example, in a given D–A pair, by introducing just one methylene unit in the spacer segment of either of the building blocks a complete change in the mode of co‐assembly (CT state or segregated state) and the morphology (1D fiber to 2D reverse vesicle) was observed. The role of solvent polarity, structural variation, and D/A ratio on the nature of co‐assembly, morphology, and the unprecedented supramolecular‐switching phenomenon have been studied by detail spectroscopic and microscopic experiments in a gel as well as in the solution state and are well supported by DFT calculations.