Giant Fullerene Polyelectrolytes Composed of C60 Building Blocks with an Octahedral Addition Pattern and Discovery of a New Cyclopropanation Reaction Involving Dibromomalonates

We report here on the facile synthetic access of a new family of bis‐, tetra‐, hexa‐, and heptafullerenes (prototypes I–IV), which can be easily converted into very water soluble polyelectrolytes with up to 60 charges located on their periphery. Their very regioselective formation is based on the use of C_2v‐symmetrical pentakisadducts 3 and hexakisadducts 2 as key intermediates. All fullerene moieties incorporated in these macromolecular structures involve a complete or partial octahedral addition pattern. Tripod‐shaped tetrafullerenes 9 a , b (type II), which can accumulate up to thirty positive or negative charges, are very soluble in acidic or basic water, respectively. Hexafullerenes 13 a , b (type III) were synthesized via isoxazolinofullerenes 10 followed by photolytic cleavage of the isoxazoline group. The giant heptafullerene 1 b (type IV) representing the anionic counterpart of the previously synthesized polyelectrolyte 1 a can store up to 60 negative charges on its periphery within a defined three‐dimensional structure. We also discovered a new cyclopropanation reaction of C₆₀ involving dibromomalonates and 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU). This reaction allows even for the highly regioselective formation of hexakisadducts with an octahedral addition pattern without requiring activation with reversibly binding addends such as 9,10‐dimethylanthracene (DMA).     

Synthesis of Amphiphilic [60]Fullerene [3:3]Hexakisadducts with Four Spherically Defined Addend Zones

New [3:3]hexakisadducts 3 , 6 , and 7 have been synthesized by a stepwise addition of two tripodal malonate tethers to pristine [60]fullerene. For the first time, [3:3]hexakisadducts of two sets of asymmetrically substituted malonate addends could be prepared as single in/out isomers by following this synthetic protocol. Thereby, four spherically defined addend zones I–IV were created with various similar degrees of latitude on the fullerene sphere. Four amphiphilic [3:3]hexakisadducts 12 , 14 , 18 , and 19 were prepared with different relative arrangements of both the hydrophilic and lipophilic moieties in the addend zones I / II and III / IV , respectively.     

Synthesis of Amphiphilic Fullerene Derivatives and Their Incorporation in Langmuir and Langmuir‐Blodgett Films

Various amphiphilic fullerene derivatives were prepared by functionalization of [5,6]fullerene‐C₆₀‐I_h (C₆₀) with malonate or bis‐malonate derivatives obtained by esterification of the malonic acid mono‐esters 5 – 7 . Cyclopropafullerene 10 was obtained by protection of the carboxylic acid function of 6 as a tert‐butyl ester, followed by Bingel addition to C₆₀ and a deprotection step (Scheme 2). The preparation of 10 was also attempted directly from the malonic acid mono‐ester 6 under Bingel conditions. Surprisingly, the corresponding 3′‐iodo‐3′H‐cyclopropa[1,9][5,6]fullerene‐C₆₀‐I_h‐3′‐carboxylate 11 was formed instead of 10 (Scheme 3). The general character of this new reaction was confirmed by the preparation of 15 and 16 from the malonic acid mono‐esters 13 and 14 , respectively (Scheme 4). All the other amphiphilic fullerene derivatives were prepared by taking advantage of the versatile regioselective reaction developed by Diederich and co‐workers which led to macrocyclic bis‐adducts of C₆₀ by a cyclization reaction at the C‐sphere with bis‐malonate derivatives in a double Bingel cyclopropanation. The bis‐adducts 37 – 39 with a carboxylic acid polar head group and four pendant long alkyl chains of different length were prepared from diol 22 and acids 5 – 7 , respectively (Scheme 9). In addition, the amphiphilic fullerene derivatives 45, 46, 49, 54 , and 55 bearing different polar head groups and compound 19 with no polar head group were synthesized (Schemes 11–13, 15, and 5, resp.). The ability of all these compounds to form Langmuir monolayers at the air‐water interface was investigated in a systematic study. The films at the water surface were characterized by their surface pressure vs. molecular area isotherms, compression and expansion cycles, and Brewster‐angle microscopy. The spreading behavior of compound 10 was not good, the two long alkyl chains in 10 being insufficient to prevent aggregation resulting from the strong fullerene‐fullerene interactions. While no films could be obtained from compound 19 with no polar head group, all the corresponding amphiphilic fullerene bis‐adducts showed good spreading characteristics and reversible behavior upon successive compression/expansion cycles. The encapsulation of the fullerene in a cyclic addend surrounded by four long alkyl chains is, therefore, an efficient strategy to prevent the irreversible aggregation resulting from strong fullerene‐fullerene interactions usually observed for amphiphilic C₆₀ derivatives at the air‐water interface. The balance of hydrophobicity to hydrophilicity was modulated by changing the length of the surrounding alkyl chains or the nature of the polar head group. The best results in terms of film formation and stability were obtained with the compounds having the largest polar head group, i.e. 45 and 46 , and dodecyl chains. Finally, the Langmuir films obtained from the amphiphilic fullerene bis‐adducts were transferred onto solid substrates, yielding high‐quality Langmuir‐Blodgett films.     

Synthesis and Electrochemical Studies of Bingel–Hirsch Derivatives of M3N@Ih‐C80 (M=Sc,Lu)

Bingel–Hirsch derivatives of the trimetallic nitride template endohedral metallofullerenes (TNT‐EMFs) Sc₃N@I_h‐C₈₀ and Lu₃N@I_h‐C₈₀ were prepared by reacting these compounds with 2‐bromodiethyl malonate, 2‐bromo‐1,3‐dipyrrolidin‐1‐ylpropane‐1,3‐dionate bromide, and 9‐bromo fluorene. The mono‐adducts were isolated and their ¹H NMR spectra showed that the addition occurred with high regioselectivity at the [6,6] bonds of the I_h‐C₈₀ fullerene cage. Electrochemical analysis showed that the reductive electrochemistry behavior of these derivatives is irreversible at a scan rate of 100 mV s^?1, which is comparable to the behavior of the pristine fullerene species. The first reduction potential of each derivative is either cathodically or anodically shifted by a different value, depending on the attached addend. Bis‐adducts containing EtOOC‐C‐COOEt and HC‐COOEt addends were isolated by HPLC and in the case of Sc₃N@I_h‐C₈₀ the first reduction potential exhibits a larger shift towards negative potentials when compared to the mono‐adduct. This observation is important for designing acceptor materials for the construction of bulk heterojunction (BHJ) organic solar cells, since the polyfunctionalization not only increases the solubility of the fullerene species but also offers a promising approach for bringing the LUMO energy levels closer for the donor and the acceptor materials.     

Selective single monomer addition in living cationic polymerization: Sequential double end‐functionalization in combination with capping agent

Amine‐functionalized and amine‐carboxylate double‐functionalized polymers ( I and II , respectively) have been synthesized by a selective single addition of a protected 2‐aminoethyl vinyl ether (BocVE) {CH₂ = CH[OCH₂CH₂N(Boc)₂]; Boc = t‐butoxycarbonyl} onto a living cationic poly(n‐butyl vinyl ether) [poly(NBVE)] initiated with the SnCl₄/n‐Bu₄NCl system: ( I ) ‐(NBVE)_n‐ CH₂CH(OCH₂CH₂NH₂)‐H; ( II ) ‐(NBVE)_n‐CH₂CH(OCH₂CH₂NH₂)‐CH₂CO₂H. The single addition was examined with a set of alkene monomers less reactive than NBVE, including BocVE, 2‐chloroethyl vinyl ether, 2‐vinyloxyethylphtalimide, and styrene (St). Upon addition of 10 molar excess of these alkenes onto the living ends, only BocVE led to the intended single adduct, and this was attributed to a chelating interaction of the two carboxylate groups in the terminal BocVE unit with the growing poly(NBVE) terminal, thus sterically hampering further propagation. A simple acid‐catalyzed Boc‐deprotection led to the amino‐functionalized version I . Alternatively, an additional quenching the BocVE‐capped living end (the precursor of I ) with sodium malonate, followed by double deprotection of the Boc and the malonate groups gave the double‐functionalized version II . The selective addition of a single monomer molecule is thus a new method for addressable or site‐specific introduction of functional groups along polymer chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3375–3381, 2010     

Harnessing Electron Transfer from the Perchlorotriphenylmethide Anion to Y@C82(C2v) to Engineer an Endometallofullerene‐Based Salt

We show that electron transfer from the perchlorotriphenylmethide anion (PTM^?) to Y@C₈₂(C_2v) is an instantaneous process, suggesting potential applications for using PTM^? to perform redox titrations of numerous endohedral metallofullerenes. The first representative of a Y@C₈₂‐based salt containing the complex cation was prepared by treating Y@C₈₂(C_2v) with the [K⁺([18]crown‐6)]PTM^? salt. The synthesis developed involves the use of the [K⁺([18]crown‐6)]PTM^? salt as a provider of both a complex cation and an electron‐donating anion that is able to reduce Y@C₈₂(C_2v). For the first time, the molar absorption coefficients for neutral and anionic forms of the pure isomer of Y@C₈₂(C_2v) were determined in organic solvents with significantly different polarities.     

C68 Fullerene Isomers,Anions, and their Metallofullerenes: Charge‐Stabilizing Different Isomers

The complete set of 6332 classical isomers of the fullerene C₆₈ as well as several non‐classical isomers is investigated by PM3, and the data for some of the more stable isomers are refined by the DFT‐based methods HCTH and B3LYP. C₂:0112 possesses the lowest energy of all the neutral isomers and it prevails in a wide range of temperatures. Among the fullerene ions modeled, C₆₈^2?, C₆₈^4? and C₆₈^6?, the isomers C₆₈^2?(C_s:0064), C₆₈^4?(C_2v:0008), and C₆₈^6?(D₃:0009) respectively, are predicted to be the most stable. This reveals that the pentagon adjacency penalty rule (PAPR) does not necessarily apply to the charged fullerene cages. The vertical electron affinities of the neutral C_s:0064, C_2v:0008, and D₃:0009 isomers are 3.41, 3.29, and 3.10 eV, respectively, suggesting that they are good electron acceptors. The predicted complexation energy, that is, the adiabatic binding energy between the cage and encapsulated cluster, of Sc₂C₂@C₆₈(C_2v:0008) is ?6.95 eV, thus greatly releasing the strain of its parent fullerene (C_2v:0008). Essentially, C₆₈ fullerene isomers are charge‐stabilized. Thus, inducing charge facilitates the isolation of the different isomers. Further investigations show that the steric effect of the encaged cluster should also be an important factor to stabilize the C₆₈ fullerenes effectively.     

Convenient Procedure for Synthesis of N‐Protected β‐Aminomalonates and β‐Amino Acids From α‐Amidosulfones

A synthesis of N‐protected β‐aminomalonates starting from α‐amidosulfones under very mild and simple reaction conditions is described. Treatment of the sulfones with malonate esters in the presence of 2.5 equivalents of potassium carbonate affords the desired products in good yield. A variety of N‐Z and N‐Boc protected aliphatic and aromatic α‐aminosulfones and malonate esters have been successfully used as starting materials. Hydrolysis with concomitant decarboxylation of the N‐protected β‐aminomalonates provides a convenient access to racemic β‐amino acids.     

The meso Helix: Symmetry and Symmetry‐Breaking in Dynamic Oligourea Foldamers with Reversible Hydrogen‐Bond Polarity

Oligoureas (up to n=6) of meso cyclohexane‐1,2‐diamine were synthesized by chain extension with an enzymatically desymmetrized monomer 2 . Despite being achiral, the meso oligomers adopt chiral canonical 2.5‐helical conformations, the equally populated enantiomeric screw‐sense conformers of which are in slow exchange on the NMR timescale, with a barrier to screw‐sense inversion of about 70 kJ mol^?1. Screw‐sense inversion in these helical foldamers is coupled with cyclohexane ring‐flipping, and results in a reversal of the directionality of the hydrogen bonding in the helix. The termini of the meso oligomers are enantiotopic, and desymmetrized analogues of the oligoureas with differentially and enantioselectively protected termini display moderate screw‐sense preferences. A screw‐sense preference may furthermore be induced in the achiral, meso oligoureas by formation of a 1:1 hydrogen‐bonded complex with the carboxylate anion of Boc‐d ‐proline. The meso oligoureas are the first examples of hydrogen‐bonded foldamers with reversible hydrogen‐bond directionality.     

Synthesis,CD Spectra,and Enzymatic Stability of β2‐Oligoazapeptides Prepared from (S)‐2‐Hydrazino Carboxylic Acids Carrying the Side Chains of Val,Ala, and Leu

β‐Peptides offer the unique possibility to incorporate additional heteroatoms into the peptidic backbone (Figs. 1 and 2). We report here the synthesis and spectroscopic investigations of β²‐peptide analogs consisting of (S)‐3‐aza‐β‐amino acids carrying the side chains of Val, Ala, and Leu. The hydrazino carboxylic acids were prepared by a known method: Boc amidation of the corresponding N‐benzyl‐L ‐α‐amino acids with an oxaziridine (Scheme 1). Couplings and fragment coupling of the 3‐benzylaza‐β²‐amino acids and a corresponding tripeptide (N‐Boc/C‐OMe strategy) with common peptide‐coupling reagents in solution led to β²‐di, β²‐tri‐, and β²‐hexaazapeptide derivatives, which could be N‐debenzylated ( 4 – 9 ; Schemes 2–4). The new compounds were identified by optical rotation, and IR, ¹H‐ and ¹³C‐NMR, and CD spectroscopy (Figs. 4 and 5) and high‐resolution mass spectrometry, and, in one case, by X‐ray crystallography (Fig. 3). In spite of extensive measurements under various conditions (temperatures, solvents), it was not possible to determine the secondary structure of the β²‐azapeptides by NMR spectroscopy (overlapping and broad signals, fast exchange between the two types of NH protons!). The CD spectra of the N‐Boc and C‐OMe terminally protected hexapeptide analog 9 in MeOH and in H₂O (at different pH) might arise from a (P)‐3₁₄‐helical structure. The N‐Boc‐β²‐tri and N‐Boc‐β²‐hexaazapeptide esters, 7 and 9 , were shown to be stable for 48 h against the following peptidases: pronase, proteinase K, chymotrypsin, trypsin, carboxypeptidase A, and 20S proteasome.     

Ultrafast Photoinduced Charge Separation Leading to High‐Energy Radical Ion‐Pairs in Directly Linked Corrole–C60 and Triphenylamine–Corrole‐C60 Donor–Acceptor Conjugates

Closely positioned donor–acceptor pairs facilitate electron‐ and energy‐transfer events, relevant to light energy conversion. Here, a triad system TPACor‐C₆₀ , possessing a free‐base corrole as central unit that linked the energy donor triphenylamine ( TPA ) at the meso position and an electron acceptor fullerene (C₆₀) at the β‐pyrrole position was newly synthesized, as were the component dyads TPA‐Cor and Cor‐C₆₀ . Spectroscopic, electrochemical, and DFT studies confirmed the molecular integrity and existence of a moderate level of intramolecular interactions between the components. Steady‐state fluorescence studies showed efficient energy transfer from ¹ TPA* to the corrole and subsequent electron transfer from ¹corrole* to fullerene. Further studies involving femtosecond and nanosecond laser flash photolysis confirmed electron transfer to be the quenching mechanism of corrole emission, in which the electron‐transfer products, the corrole radical cation ( Cor^?+ in Cor‐C₆₀ and TPA‐Cor^?+ in TPACor‐C₆₀ ) and fullerene radical anion (C₆₀^??), could be spectrally characterized. Owing to the close proximity of the donor and acceptor entities in the dyad and triad, the rate of charge separation, k_CS, was found to be about 10¹¹ s^?1, suggesting the occurrence of an ultrafast charge‐separation process. Interestingly, although an order of magnitude slower than k_CS, the rate of charge recombination, k_CR, was also found to be rapid (k_CR≈10¹⁰ s^?1), and both processes followed the solvent polarity trend DMF>benzonitrile>THF>toluene. The charge‐separated species relaxed directly to the ground state in polar solvents while in toluene, formation of ³corrole* was observed, thus implying that the energy of the charge‐separated state in a nonpolar solvent is higher than the energy of ³corrole* being about 1.52 eV. That is, ultrafast formation of a high‐energy charge‐separated state in toluene has been achieved in these closely spaced corrole–fullerene donor–acceptor conjugates.     

Synthesis and properties of carbamate‐ and amine‐containing poly(phenylacetylenes)

The 3‐ and 4‐aminophenylacetylenes protected by t‐butoxycarbonyl (t‐Boc) and 9‐fluorenylmethoxycarbonyl (Fmoc) groups ( 3a – 6a ) were synthesized and polymerized using [(nbd)RhCl]₂ ( 1 ) and [(nbd)Rh⁺‐η⁶‐PhB^?Ph₃] ( 2 ) catalysts. The t‐Boc‐containing polymers [poly( 3a ) and poly( 4a )] were obtained in high yield (82–91%). Among the Fmoc‐protected monomers, the para‐derivative polymerized well [poly( 6a ); yield = 85–94%], whereas its meta‐substituted analogue did not afford high molecular weight polymer in good yield [poly( 5a ); yield = 10–15%]. The use of KN(SiMe₃)₂ as a cocatalyst in conjunction with 1 led to a dramatic increase in the molecular weight of the polymers. The acid‐ and base‐catalyzed removal of the t‐Boc and the Fmoc groups, respectively, generated primary amine‐containing polymers [poly( 3b )–poly( 6b )] which cannot be obtained directly by the polymerization of the corresponding monomers. The solubility characteristics of the polymers bearing protected amino groups were quite different from those of the unprotected ones, the former being soluble in polar solvents, whereas the latter displayed poor solubility even in polar protic or highly polar aprotic solvents. The attempts to accomplish the free‐standing membrane fabrication by solution casting were successful only for poly( 3a ), and an augmentation in the gas permeability and CO₂/N₂ permselectivity was discerned in comparison with the unsubstituted poly(phenylacetylene) and poly(m‐t‐butyldimethylsiloxyphenylacetylene). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1853–1863, 2009     

A Convenient Synthesis of N‐Boc‐Protected α‐Aminonitriles from α‐Amidosulfones

Abstract

Synthesis of N‐Boc‐protected α‐aminonitriles starting from N‐Boc‐protected α‐aminosulfones is described. Treatment of the sulfone with two equivalents of potassium cyanide in 2‐propanol or dichloromethane‐H₂O under phase transfer condition affords crystalline N‐Boc‐protected α‐aminonitriles in good yield. Hydrolysis of the aminonitriles provides a convenient access to racemic α‐amino acids.     

Synthesis and self‐assembly of amphiphilic brush‐dendritic‐linear poly[poly(ethylene glycol) methyl ether methacrylate]‐b‐ polyamidoamine‐b‐poly(ε‐caprolactone) copolymers

A series of novel amphiphilic brush‐dendritic‐linear poly[poly(ethylene glycol) methyl ether methacrylate]‐b‐polyamidoamine‐b‐poly(ε‐caprolactone) copolymers (PPEGMEMA‐b‐D_m‐b‐PCL) (m = 1, 2, and 3: the generation number of dendron) were synthesized by the combination techniques of click chemistry, atom transfer radical polymerization (ATRP), and ring‐opening polymerization (ROP). The brush‐dendritic copolymers bearing hydrophilic brush PPEGMEMA and hydrophobic dendron polyamidoamine protected by the tert‐butoxycarbonyl (Boc) groups [D_m‐(Boc) (m = 1, 2, and 3)] were for the first time prepared by ATRP of poly(ethylene glycol) methyl ether methacrylate monomer (PEGMEMA) initiated with the dendron initiator, which was prepared from 2′‐azidoethyl‐2‐bromoisobutyrate (AEBIB) and D_m‐(Boc) terminated with a clickable alkyne by click chemistry. Then, the brush‐dendritic copolymers with primary amine groups (PPEGMEMA‐b‐D_m) were obtained from the removal of the protected Boc groups of the brush‐dendritic copolymers in the presence of trifluoroacetic acid. The brush‐dendritic‐linear PPEGMEMA‐b‐D_m‐b‐PCL copolymers were synthesized from ROP of ε‐caprolactone monomer using PPEGMEMA‐b‐D_m as the macroinitiators and stannous octoate as catalyst in toluene at 130 °C. To the best of our knowledge, this is the first report that integrates hydrophilic brush polymer PPEGMEMA with hydrophobic polyamidoamine (PAMAM) dendron and PCL to form amphiphilic brush‐dendritic‐linear copolymers. The amphiphilic brush‐dendritic‐linear copolymers can self‐assemble into spherical micellar structures in aqueous solution. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Oligoporphyrin Arrays Conjugated to [60]Fullerene: Preparation,NMR Analysis,and Photophysical and Electrochemical Properties

We report the synthesis and physical properties of novel fullerene–oligoporphyrin dyads. In these systems, the C‐spheres are singly linked to the terminal tetrapyrrolic macrocycles of rod‐like meso,meso‐linked or triply‐linked oligoporphyrin arrays. Monofullerene–mono(Zn^II porphyrin) conjugate 3 was synthesized to establish a general protocol for the preparation of the target molecules (Scheme 1). The synthesis of the meso,meso‐linked oligopophyrin–bisfullerene conjugates 4 – 6 , extending in size up to 4.1 nm ( 6 ), was accomplished by functionalization (iodination followed by Suzuki cross‐coupling) of the two free meso‐positions in oligomers 21 – 23 (Schemes 2 and 3). The attractive interactions between a fullerene and a Zn^II porphyrin chromophore in these dyads was quantified as ΔG=−3.3 kcal mol⁻¹ by variable‐temperature (VT) ¹H‐NMR spectroscopy (Table 1). As a result of this interaction, the C‐spheres adopt a close tangential orientation relative to the plane of the adjacent porphyrin nucleus, as was unambiguously established by ¹H‐ and ¹³C‐NMR (Figs. 9 and 10), and UV/VIS spectroscopy (Figs. 13–15). The synthesis of triply‐linked diporphyrin–bis[60]fullerene conjugate 8 was accomplished by Bingel cyclopropanation of bis‐malonate 45 with two C₆₀ molecules (Scheme 5). Contrary to the meso,meso‐linked systems 4 – 6 , only a weak chromophoric interaction was observed for 8 by UV/VIS spectroscopy (Fig. 16 and Table 2), and the ¹H‐NMR spectra did not provide any evidence for distinct orientational preferences of the C‐spheres. Comprehensive steady‐state and time‐resolved UV/VIS absorption and emission studies demonstrated that the photophysical properties of 8 differ completely from those of 4 – 6 and the many other known porphyrin–fullerene dyads: photoexcitation of the methano[60]fullerene moieties results in quantitative sensitization of the lowest singlet level of the porphyrin tape, which is low‐lying and very short lived. The meso,meso‐linked oligoporphyrins exhibit ¹O₂ sensitization capability, whereas the triply‐fused systems are unable to sensitize the formation of ¹O₂ because of the low energy content of their lowest excited states (Fig. 18). Electrochemical investigations (Table 3, and Figs. 19 and 20) revealed that all oligoporphyrin arrays, with or without appended methano[60]fullerene moieties, have an exceptional multicharge storage capacity due to the large number of electrons that can be reversibly exchanged. Some of the Zn^II porphyrins prepared in this study form infinite, one‐dimensional supramolecular networks in the solid state, in which the macrocycles interact with each other either through H‐bonding or metal ion coordination (Figs. 6 and 7).     

Preparation of β2‐Amino Acid Derivatives (β2hThr, β2hTrp, β2hMet, β2hPro, β2hLys,Pyrrolidine‐3‐carboxylic Acid) by Using DIOZ as Chiral Auxiliary

The title compounds were prepared from valine‐derived N‐acylated oxazolidin‐2‐ones, 1 – 3, 7, 9 , by highly diastereoselective (≥ 90%) Mannich reaction (→ 4 – 6 ; Scheme 1) or aldol addition (→ 8 and 10 ; Scheme 2) of the corresponding Ti‐ or B‐enolates as the key step. The superiority of the ‘5,5‐diphenyl‐4‐isopropyl‐1,3‐oxazolidin‐2‐one’ (DIOZ) was demonstrated, once more, in these reactions and in subsequent transformations leading to various t‐Bu‐, Boc‐, Fmoc‐, and Cbz‐protected β²‐homoamino acid derivatives 11 – 23 (Schemes 3–6). The use of ω‐bromo‐acyl‐oxazolidinones 1 – 3 as starting materials turned out to open access to a variety of enantiomerically pure trifunctional and cyclic carboxylic‐acid derivatives.     

Photocycloisomerization of Boc‐Protected 5‐Alkenyl‐2,5‐dihydro‐1H‐ pyrrol‐2‐ones

On irradiation (254 nm), the newly synthesized Boc‐protected 5‐alkenyl‐2,5‐dihydro‐1H‐pyrrol‐2‐ones 13 undergo regioselective intramolecular [2+2] photocycloadditions. While the allyl derivatives 13a – 13c afford mainly azatricyclo[3.3.0.0^2,7]octanones, i.e., crossed cycloadducts, the butenyl‐ and pentenyl‐substituted compounds 13d and 13e isomerize preferentially to straight cycloadducts.     

Sc2O@Td(19151)‐C76: Hindered Cluster Motion inside a Tetrahedral Carbon Cage Probed by Crystallographic and Computational Studies

A new cluster fullerene, Sc₂O@T_d(19151)‐C₇₆, has been isolated and characterized by mass spectrometry, UV/Vis/NIR absorption, ⁴⁵Sc NMR spectroscopy, cyclic voltammetry, and single‐crystal X‐ray diffraction. The crystallographic analysis unambiguously assigned the cage structure as T_d(19151)‐C₇₆, which is the first tetrahedral fullerene cage characterized by single‐crystal X‐ray diffraction. This study also demonstrated that the Sc₂O cluster has a much smaller Sc?O?Sc angle than that of Sc₂O@C_s(6)‐C₈₂ and the Sc₂O unit is fully ordered inside the T_d(19151)‐C₇₆ cage. Computational studies further revealed that the cluster motion of the Sc₂O is more restrained in the T_d(19151)‐C₇₆ cage than that in the C_s(6)‐C₈₂ cage. These results suggest that cage size affects not only the shapes but also the cluster motion inside fullerene cages.     

Synthesis,Conformational Interconversion,and Photophysics of Tethered Porphyrin–Fullerene Dyads with Parachute Topology

The synthesis of a porphyrin–fullerene dyad with “parachute” topology is reported. To determine whether the dyad is “flexing” at room temperature, low‐temperature NMR experiments were used. Computational modeling has shown the low‐energy conformation of the dyad to be nonsymmetric. Although, ¹H NMR spectroscopy at room temperature is consistent with a molecule with C_2v symmetry, the spectrum changes on lowering the temperature consistent with “windshield wiper”‐like motion, in which the porphyrin moiety rotates from one side of the C₆₀ sphere to the other. Nanosecond and picosecond fluorescence lifetime experiments show two components contribute to the fluorescence decay, also consistent with the presence of more than one conformer.     

Si-Tethered Bis- and Tris-Malonates for the Regioselective Preparation of Fullerene Multi-Adducts

Bis- and tris-malonates constructed around a silicon atom have been prepared by reaction of malonate derivatives bearing an alcohol function with di-tert-butylsilyl bis(trifluoromethanesulfonate) and tert-butyl(trichloro)silane, respectively. These compounds have been used for the regioselective bis- and tris-functionalization of C₆₀ under Bingel conditions. By changing the nature of the linker between the central Si atom and the reactive malonate groups, the malonate precursors have been optimized to produce specific bis- and tris-adducts with excellent regioselectivity. A complete understanding of the electronic and stereochemical factors governing the regioselectivity has been obtained by combining computational studies with a complete analysis of the by-products formed during the reactions of the Si-tethered tris-malonates with C₆₀. Finally, desilylation reactions of the resulting fullerene bis- and tris-adducts have been carried out to generate the corresponding acyclic fullerene bis- and tris-adducts bearing alcohol functions.