Highly Active Superbulky Alkaline Earth Metal Amide Catalysts for Hydrogenation of Challenging Alkenes and Aromatic Rings

Two series of bulky alkaline earth (Ae) metal amide complexes have been prepared: Ae[N(TRIP)₂]₂ ( 1 ‐Ae) and Ae[N(TRIP)(DIPP)]₂ ( 2 ‐Ae) (Ae=Mg, Ca, Sr, Ba; TRIP=SiiPr₃, DIPP=2,6‐diisopropylphenyl). While monomeric 1 ‐Ca was already known, the new complexes have been structurally characterized. Monomers 1 ‐Ae are highly linear while the monomers 2 ‐Ae are slightly bent. The bulkier amide complexes 1 ‐Ae are by far the most active catalysts in alkene hydrogenation with activities increasing from Mg to Ba. Catalyst 1 ‐Ba can reduce internal alkenes like cyclohexene or 3‐hexene and highly challenging substrates like 1‐Me‐cyclohexene or tetraphenylethylene. It is also active in arene hydrogenation reducing anthracene and naphthalene (even when substituted with an alkyl) as well as biphenyl. Benzene could be reduced to cyclohexane but full conversion was not reached. The first step in catalytic hydrogenation is formation of an (amide)AeH species, which can form larger aggregates. Increasing the bulk of the amide ligand decreases aggregate size but it is unclear what the true catalyst(s) is (are). DFT calculations suggest that amide bulk also has a noticeable influence on the thermodynamics for formation of the (amide)AeH species. Complex 1 ‐Ba is currently the most powerful Ae metal hydrogenation catalyst. Due to tremendously increased activities in comparison to those of previously reported catalysts, the substrate scope in hydrogenation catalysis could be extended to challenging multi‐substituted unactivated alkenes and even to arenes among which benzene.     

Alkali earth metal (Ca, Sr, Ba) based thermostable metal-organic frameworks (MOFs) for proton conduction

Three new alkaline earth metal based MOFs have been synthesized by using 4,4'-sulfobisbenzoic acid (SBBA) and alkaline earth metal salts M(NO(3))(2), M = Ca, Sr, Ba. These MOFs exhibit interesting structural diversity, variable chemical stability as well as proton conductivity.     

添加碱土金属对负载型铂锡催化剂长链烷烃脱氢反应性能的影响

用微型催化反应装置结合吡啶吸附 红外光谱、热重、氢化学吸附和程序升温等还原手段,研究了添加碱土金属离子助剂对负载型PtSn/γ-Al2O3催化剂长链烷烃(C10~13)脱氢反应性能的影响。结果表明,碱土金属助剂的引入可以降低催化剂积炭量、提高催化剂铂金属表面裸露度,从而提高催化剂脱氢反应稳定性。但强碱性的碱土金属助剂如Ba2+的引入增强了锡与载体之间的相互作用,减弱了锡与铂之间的相互作用, 导致反应后催化剂铂金属表面裸露度下降,故PtSnBa/γ-Al2O3催化剂脱氢活性较低。     

Recent Advances on Confining Noble Metal Nanoparticles Inside Metal-Organic Frameworks for Hydrogenation Reactions

Hydrogenation reaction is one of the pillars of the chemical industry for the synthesis of drugs and fine chemicals. To achieve high catalytic performance, it is still highly desirable for constructing novel supported metal catalysts. Different from conventional supports like metal oxides, zeolites and carbon materials, metal-organic frameworks(MOFs) as the emerging porous materials have Hexhibited great potential to host metal nanoparticles (NPs) for achieving hydrogenation reactions with high catalytic efficiency, due to their unique porous structures. Recently, many progresses have been made, and thus, it is necessary to summarize the recent progresses on confining metal NPs inside MOFs for hydrogenation reactions. In this review, we first introduced the general synthesis methods for confining noble metal NPs inside MOFs. Then, the applications of noble metal NPs/MOFs catalysts in hydrogenation reactions were summarized, and the synergistic catalytic performances among noble metal NPs, metal nodes, functional groups, and pore channels in MOFs were illustrated. Subsequently, the hydrogen spillover effect involved in the hydrogenation reactions was discussed. Finally, we provide an outlook on the future research directions and challenges of confining noble metal NPs inside MOFs for hydrogenation reactions.     

Super‐Bulky Penta‐arylcyclopentadienyl Ligands: Isolation of the Full Range of Half‐Sandwich Heavy Alkaline‐Earth Metal Hydrides

Hydrogenolysis of the half‐sandwich penta‐arylcyclopentadienyl‐supported heavy alkaline‐earth‐metal alkyl complexes (Cp^Ar)Ae[CH(SiMe₃)₂](S) (Cp^Ar=C₅Ar₅, Ar=3,5‐ⁱPr₂‐C₆H_3; S=THF or DABCO) in hexane afforded the calcium, strontium, and barium metal–hydride complexes as the same dimers [(Cp^Ar)Ae(μ‐H)(S)]₂ (Ae=Ca, S=THF, 2‐Ca ; Ae=Sr, Ba, S=DABCO, 4‐Ae ), which were characterized by NMR spectroscopy and single‐crystal X‐ray analysis. 2‐Ca , 4‐Sr , and 4‐Ba catalyzed alkene hydrogenation under mild conditions (30 °C, 6 atm, 5 mol % cat.), with the activity increasing with the metal size. A variety of activated alkenes including tri‐ and tetra‐substituted olefins, semi‐activated alkene (Me₃SiCH=CH₂), and unactivated terminal alkene (1‐hexene) were evaluated.     

Homogeneous hydrogenation of electron‐deficient alkenes by iridium complexes

The catalytic homogeneous hydrogenation of electron‐deficient alkenes (nucleophilic hydrogenation) was achieved in the presence of iridium complexes and a base as co‐catalyst. Contrary to hydrogenation of electron‐rich alkenes, which is inactivated by bases, the hydrogenation of the electron‐deficient alkenes turned out to be base activated. Here, we present a more thorough study on the capacities but also limitations of this new reaction mechanism using screenings of the reaction conditions as well as different Ir complexes and substrates. The formation of a catalytically active Ir complex is proposed. The active complex usually attacks a soft electron‐deficient atom, if more than one possibility exists (as shown by density functional theory computations). Additionally, first examples of enantiomeric enrichments in the presence of chiral Ir complexes are presented. The high catalyst load needed and the moderate yields show that the active complex is very unstable under conditions of nucleophilic hydrogenation and is quickly deactivated, which has to be addressed in further studies. Copyright © 2011 John Wiley & Sons, Ltd.     

Dynamic Calcium Metal–Organic Framework Acts as a Selective Organic Solvent Sponge

Herein, we present a Ca‐based metal–organic framework named AEPF‐1, which is an active and selective catalyst in olefin hydrogenation reactions. AEPF‐1 exhibits a phase transition upon desorption of guest molecules. This structural transformation takes place by a crystal to crystal transformation accompanied by the loss of single‐crystal integrity. Powder diffraction methods and computational studies were applied to determine the structure of the guest‐free phase. This work also presents data on the exceptional adsorption behavior of this material, which is shown to be capable of separating polar from nonpolar organic solvents, and is a good candidate for selective solvent adsorption under mild conditions.     

Alkene Transfer Hydrogenation with Alkaline‐Earth Metal Catalysts

The alkene transfer hydrogenation (TH) of a variety of alkenes has been achieved with simple AeN′′₂ catalysts [Ae=Ca, Sr, Ba; N′′=N(SiMe₃)₂] using 1,4‐cyclohexadiene (1,4‐CHD) as a H source. Reaction of 1,4‐CHD with AeN′′₂ gave benzene, N′′H, and the metal hydride species N′′AeH (or aggregates thereof), which is a catalyst for alkene hydrogenation. BaN′′₂ is by far the most active catalyst. Hydrogenation of activated C=C bonds (e.g. styrene) proceeded at room temperature without polymer formation. Unactivated (isolated) C=C bonds (e.g. 1‐hexene) needed a higher temperature (120 °C) but proceeded without double‐bond isomerization. The ligands fully control the course of the catalytic reaction, which can be: 1) alkene TH, 2) 1,4‐CHD dehydrogenation, or 3) alkene polymerization. DFT calculations support formation of a metal hydride species by deprotonation of 1,4‐CHD followed by H transfer. Convenient access to larger quantities of BaN′′₂, its high activity and selectivity, and the many advantages of TH make this a simple but attractive procedure for alkene hydrogenation.     

Silica‐Protection‐Assisted Encapsulation of Cu2O Nanocubes into a Metal–Organic Framework (ZIF‐8) To Provide a Composite Catalyst

The integration of metal/metal oxide nanoparticles (NPs) into metal–organic frameworks (MOFs) to form composite materials has attracted great interest due to the broad range of applications. However, to date, it has not been possible to encapsulate metastable NPs with high catalytic activity into MOFs, due to their instability during the preparation process. For the first time, we have successfully developed a template protection–sacrifice (TPS) method to encapsulate metastable NPs such as Cu₂O into MOFs. SiO₂ was used as both a protective shell for Cu₂O nanocubes and a sacrificial template for forming a yolk–shell structure. The obtained Cu₂O@ZIF‐8 composite exhibits excellent cycle stability in the catalytic hydrogenation of 4‐nitrophenol with high activity. This is the first report of a Cu₂O@MOF‐type composite material. The TPS method provides an efficient strategy for encapsulating unstable active metal/metal oxide NPs into MOFs or maybe other porous materials.     

Carbon–Carbon Bond Formation in a Weak Ligand Field: Leveraging Open‐Shell First‐Row Transition‐Metal Catalysts

Unique features of earth‐abundant transition‐metal catalysts are reviewed in the context of catalytic carbon–carbon bond‐forming reactions. Aryl‐substituted bis(imino)pyridine iron and cobalt dihalide compounds, when activated with alkyl aluminum reagents, form highly active catalysts for the polymerization of ethylene. Open‐shell iron and cobalt alkyl complexes have been synthesized that serve as single‐component olefin polymerization catalysts. Reduced bis(imino)pyridine iron and cobalt dinitrogen compounds have also been discovered that promote the unique [2+2] cycloaddition of unactivated terminal alkenes. Studies of the electronic structure support open‐shell intermediates, a deviation from traditional strong‐field organometallic compounds that promote catalytic C−C bond formation.     

An Alkene‐Promoted Borane‐Catalyzed Highly Stereoselective Hydrogenation of Alkynes to Give Z‐ and E‐Alkenes

The stereoselective hydrogenation of alkynes to alkenes is an extremely useful transformation in synthetic chemistry. Despite numerous reports for the synthesis of Z‐alkenes, the hydrogenation of alkynes to give E‐alkenes is still not well resolved. In particular, selective preparation of both Z‐ and E‐alkenes by the same catalytic hydrogenation system using molecular H₂ has rarely been reported. In this paper, a novel strategy of using simple alkenes as promoters for the HB(C₆F₅)₂‐catalyzed metal‐free hydrogenation of alkynes was adopted. Significantly, both Z‐ and E‐alkenes can be furnished by hydrogenation with molecular H₂ in high yields with excellent stereoselectivities. Further experimental and theoretical mechanistic studies suggest that interactions between H and F atoms of the alkene promoter, borane intermediate, and H₂ play an essential role in promoting the hydrogenolysis reaction.     

d–d Dative Bonding Between Iron and the Alkaline‐Earth Metals Calcium,Strontium, and Barium

Double deprotonation of the diamine 1,1′‐(tBuCH₂NH)‐ferrocene ( 1 ‐H₂) by alkaline‐earth (Ae) or Eu^II metal reagents gave the complexes 1 ‐Ae (Ae=Mg, Ca, Sr, Ba) and 1 ‐Eu. 1 ‐Mg crystallized as a monomer while the heavier complexes crystallized as dimers. The Fe???Mg distance in 1 ‐Mg is too long for a bonding interaction, but short Fe???Ae distances in 1 ‐Ca, 1 ‐Sr, and 1 ‐Ba clearly support intramolecular Fe???Ae bonding. Further evidence for interactions is provided by a tilting of the Cp rings and the related ¹H NMR chemical‐shift difference between the Cp α and β protons. While electrochemical studies are complicated by complex decomposition, UV/Vis spectral features of the complexes support Fe→Ae dative bonding. A comprehensive bonding analysis of all 1 ‐Ae complexes shows that the heavier species 1 ‐Ca, 1 ‐Sr, and 1 ‐Ba possess genuine Fe→Ae bonds which involve vacant d‐orbitals of the alkaline‐earth atoms and partially filled d‐orbitals on Fe. In 1 ‐Mg, a weak Fe→Mg donation into vacant p‐orbitals of the Mg atom is observed.     

Selective Catalytic Chemistry at Rhodium(II) Nodes in Bimetallic Metal–Organic Frameworks

We report the first study of a gas‐phase reaction catalyzed by highly dispersed sites at the metal nodes of a crystalline metal–organic framework (MOF). Specifically, CuRhBTC (BTC^3?=benzenetricarboxylate) exhibited hydrogenation activity, while other isostructural monometallic and bimetallic MOFs did not. Our multi‐technique characterization identifies the oxidation state of Rh in CuRhBTC as +2, which is a Rh oxidation state that has not previously been observed for crystalline MOF metal nodes. These Rh²⁺ sites are active for the catalytic hydrogenation of propylene to propane at room temperature, and the MOF structure stabilizes the Rh²⁺ oxidation state under reaction conditions. Density functional theory calculations suggest a mechanism in which hydrogen dissociation and propylene adsorption occur at the Rh²⁺ sites. The ability to tailor the geometry and ensemble size of the metal nodes in MOFs allows for unprecedented control of the active sites and could lead to significant advances in rational catalyst design.     

Migratory Hydrogenation of Terminal Alkynes by Base/Cobalt Relay Catalysis

Migratory functionalization of alkenes has emerged as a powerful strategy to achieve functionalization at a distal position to the original reactive site on a hydrocarbon chain. However, an analogous protocol for alkyne substrates is yet to be developed. Herein, a base and cobalt relay catalytic process for the selective synthesis of (Z)‐2‐alkenes and conjugated E alkenes by migratory hydrogenation of terminal alkynes is disclosed. Mechanistic studies support a relay catalytic process involving a sequential base‐catalyzed isomerization of terminal alkynes and cobalt‐catalyzed hydrogenation of either 2‐alkynes or conjugated diene intermediates. Notably, this practical non‐noble metal catalytic system enables efficient control of the chemo‐, regio‐, and stereoselectivity of this transformation.     

Ultrafine Na-4-mica: uptake of alkali and alkaline earth metal cations by ion exchange

The cation exchange properties of alkali and alkaline earth metal cations at room temperature were investigated on an ultrafine, highly charged Na-4-mica (with the ideal mica composition Na4Mg6Al4Si4O20F4.xH2O). Ultrafine mica crystallites of 200 nm in size led to faster Sr2+ uptake kinetics in comparison to larger mica crystallites. The alkali metal ion (K+, Cs+, and Li+) exchange uptake was rapid, and complete exchange occurred within 30 min. For the alkaline earth metal ions Ba2+, Ca2+, and Mg2+, however, the exchange uptake required lengthy periods from 3 days to 4 weeks to be completed, similar to its Sr uptake, as previously reported. Kinetic models of the modified Freundlich and parabolic diffusion were examined for the experimental data on the Ba2+, Ca2+, and Mg2+ uptakes. The modified Freundlich model described well the Ba2+ ion uptake kinetics as well as that for the Sr2+ ion, while for the Ca2+ and Mg2+ ions the parabolic diffusion model showed better fitting. The alkali and alkaline earth ion exchange isotherms were also determined in comparison to the Sr2+ exchange isotherm. The thermodynamic equilibria for these cations were compared by using Kielland plots evaluated from the isotherms.     

Infrared spectra and electronic structure calculations for the group 2 metal M(OH)2 dihydroxide molecules

Reactions of laser-ablated Mg, Ca, Sr, and Ba atoms with O2 and H2 in excess argon give new absorptions in the O-H and O-M-O stretching regions, which increase together upon UV photolysis and are due to the M(OH)2 molecules (M = Mg, Ca, Sr, and Ba). The same product absorptions are observed in the metal atom reactions with H2O2. The M(OH)2 identifications are supported by isotopic substitution and theoretical calculations (B3LYP and MP2). The O-H stretching frequencies of the alkaline earth metal dihydroxide molecules decrease from 3829.8 to 3784.6 to 3760.6 to 3724.2 cm(-1) in the family series in solid argon, while the base strength of the solid compounds increases. Calculations show that Sr(OH)2 and Ba(OH)2 are bent at the metal center, owing to d orbital involvement in the bonding. Although these molecules are predominantly ionic, the O-H stretching frequencies do not reach the ionic limit of gaseous OH- going down the family group because of cation-anion polarization and p(pi) --> d(pi) interactions.     

Alkene Hydrogenations by Soluble Iron Nanocluster Catalysts

The replacement of noble metal technologies and the realization of new reactivities with earth‐abundant metals is at the heart of sustainable synthesis. Alkene hydrogenations have so far been most effectively performed by noble metal catalysts. This study reports an iron‐catalyzed hydrogenation protocol for tri‐ and tetra‐substituted alkenes of unprecedented activity and scope under mild conditions (1–4 bar H₂, 20 °C). Instructive snapshots at the interface of homogeneous and heterogeneous iron catalysis were recorded by the isolation of novel Fe nanocluster architectures that act as catalyst reservoirs and soluble seeds of particle growth.     

A mild and efficient palladium–triethylsilane system for reduction of olefins and carbon–carbon double bond isomerization

The versatility of palladium(II) acetate and palladium on activated charcoal catalysts with triethylsilane has been investigated in the hydrogenation and the isomerization of carbon–carbon double bond of 1‐alkenes. The reduction of 1‐alkenes was carried out in the presence of triethylsilane, ethanol and a catalytic amount of palladium(II) acetate or palladium on activated charcoal, at room temperature. This facile and efficient method affords high yields for hydrogenation of unsaturated alkenes to the corresponding alkanes. Then the carbon–carbon double bond isomerization of 1‐alkenes was tested using the same catalysts in the absence of solvent. The system palladium(II) acetate‐triethylsilane was found to be more effective compared with palladium on an activated charcoal–triethylsilane system at room temperature, while comparable results were obtained at 50 °C for both catalysts. Copyright © 2006 John Wiley & Sons, Ltd.     

Perovskite Distortion Inverted: Crystal Structures of (A3N)As (A = Mg,Ca, Sr,Ba)

Powder samples of the compounds (A₃N)As (A = Mg, Ca, Sr, Ba) were prepared by reacting the respective alkaline earth metal nitrides and arsenic in nickel ampoules. (Mg₃N)As crystallizes in a cubic unit cell (space group Pm3 m, no. 221) with inverse perovskite structure. The analogous compounds of calcium, strontium, and barium crystallize in an orthorhombic unit cell (space group Pnma, no. 62) as distorted inverse perovskites in the GdFeO₃ structure type. The degree of distortion was quantified based on a newly developed vectorial comparison of the atomic sites of coordination polyhedra with the ideal positions (PolyDis). Based on this analysis, the distortion increases with the size of the alkaline earth metal cation.     

Sinter‐Resistant Platinum Catalyst Supported by Metal–Organic Framework

Single atoms and few‐atom clusters of platinum are uniformly installed on the zirconia nodes of a metal‐organic framework (MOF) NU‐1000 via targeted vapor‐phase synthesis. The catalytic Pt clusters, site‐isolated by organic linkers, are shown to exhibit high catalytic activity for ethylene hydrogenation while exhibiting resistance to sintering up to 200 °C. In situ IR spectroscopy reveals the presence of both single atoms and few‐atom clusters that depend upon synthesis conditions. Operando X‐ray absorption spectroscopy and X‐ray pair distribution analyses reveal unique changes in chemical bonding environment and cluster size stability while on stream. Density functional theory calculations elucidate a favorable reaction pathway for ethylene hydrogenation with the novel catalyst. These results provide evidence that atomic layer deposition (ALD) in MOFs is a versatile approach to the rational synthesis of size‐selected clusters, including noble metals, on a high surface area support.