Substitution effects on ferroelectric,leakage current and anti‐fatigue characteristic of Bi4‐xSbxTi3O12 thin films

Bi_4‐xSb_xTi₃O₁₂ (BSTO) (x = 0, 0.03, 0.04, 0.05, 0.06 and 0.07) thin films have been fabricated on Pt/Ti/SiO₂/Si substrates by sol‐gel method. The effects of various Sb³⁺ content on microstructure and ferroelectric properties of systems are investigated. XRD show that Bi_4‐xSb_xTi₃O₁₂ (x≠0) thin films prefer (117) orientation. The substitution Sb³⁺ for Bi³⁺ reduces the grain size of the film surface. Compared to the BTO (x = 0) film, Bi_4‐xSb_xTi₃O₁₂ films display exciting electric properties. Especially when x = 0.04, the film Bi_3.96Sb_0.04Ti₃O₁₂ has achieved the max 2Pr value of 87μC/cm². This film also has a better anti‐fatigue characteristic, which can be up to 10¹⁰ switching cycles without fatigue. The leakage current density improved with J = 8×10⁻⁸ A/cm².     

Microwave dielectric properties of (1‐x)La(Mg0.5Sn0.5)O3‐x(Sr0.8Ca0.2)3Ti2O7 ceramic system with a near zero temperature coefficient of resonant frequency

In this study, the microwave dielectric properties of (1‐x)La(Mg_0.5Sn_0.5)O₃‐x(Sr_0.8Ca_0.2)₃Ti₂O₇ ceramic system prepared by the conventional solid‐state method have been investigated for application in mobile communication. It was found that the diffraction peaks of (1‐x)La(Mg_0.5Sn_0.5)O₃‐x(Sr_0.8Ca_0.2)₃Ti₂O₇ ceramic system shift to higher angles as x increases from 0.2 to 0.4. It was also found that the X‐ray diffraction patterns of the 0.8La(Mg_0.5Sn_0.5)O₃‐0.2(Sr_0.8Ca_0.2)₃Ti₂O₇ ceramics exhibited no significant phase difference at different sintering temperatures. The average grain size of the (1‐x)La(Mg_0.5Sn_0.5)O₃‐x(Sr_0.8Ca_0.2)₃Ti₂O₇ ceramic system decreased from 6.4 to 4.3 μm as the value of x increased from 0.2 to 0.4 sintered at 1550 °C for 4 h. The dielectric constant increased from 26.6 to 35.9 and the quality factor (Q×f) decreased from 31,600 to 23,300 GHz for (1‐x)La(Mg_0.5Sn_0.5)O₃‐x(Sr_0.8Ca_0.2)₃Ti₂O₇ ceramic system as the x value increases from 0.2 to 0.4 sintered at 1550 °C for 4 h. The average value of temperature coefficient of resonant frequency (τ_f) increased from ‐18 to +8 ppm/ K as the x value increases from 0.2 to 0.4. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Laser‐induced crystal growth of nonlinear optical Ba3Ti3O6(BO3)2 on glass surface

Nonlinear optical Ba₃Ti₃O₆(BO₃)₂ crystals were patterned on the surface of CuO (1 mol%)‐doped 40BaO‐40TiO₂‐20B₂O₃ glass by irradiations of continuous‐wave Nd:YAG (wavelength: λ=1064 nm) and Yb:YVO₄ (λ=1080 nm) lasers. Laser energies absorbed by Cu²⁺ ions were transferred to the lattice system through a nonradiative relaxation process, consequently heating the glass and inducing local crystallizations. For the lines patterned by Yb:YVO₄ laser irradiations with a power of 1 W and a scanning speed of 20 μm/s, a c‐axis orientation of Ba₃Ti₃O₆(BO₃)₂ crystals along the laser scanning direction is proposed from measurements of X‐ray diffraction analyses, polarized optical photographs, polarized micro‐Raman scattering spectra, and azimuthal dependence of second harmonic generations. The laser‐induced crystallization technique is found to be applied successfully for the spatially selective patterning of nonlinear optical Ba₃Ti₃O₆(BO₃)₂ crystals in glass. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effective electro‐optic coefficient of (1–x)Pb(Zn1/3Nb2/3)O3–xPbTiO3 single crystals

Refractive indices and effective electro‐optic coefficient γ_c of (1–x)Pb(Zn_1/3Nb_2/3)O₃–xPbTiO₃ (PZN‐xPT, x = 0.05, 0.09 and 0.12) single crystals were measured at 532 nm wavelength. Orientation and temperature dependences of the electro‐optic coefficient were investigated. Large electro‐optic coefficient (γ_c = 470 pm/V) was observed in [001]‐poled PZN‐0.09PT crystal. More importantly, γ_c of tetragonal PZN‐0.12PT is almost unchanged in a temperature range −20 ∼ 80 °C. The γ_c of PZN‐xPT single crystals are much higher than that of widely used electro‐optic crystal LiNbO₃ (γ_c = 20 pm/V). These results show that PZN‐xPT single crystals are very promising materials for electro‐optic modulators in optical communications.     

Interaction in the molten system Rb2O‐P2O5‐TiO2‐NiO. Crystal structure of the langbeinite‐related Rb2Ni0.5Ti1.5(PO4)3

The interaction in the molten system Rb₂O‐P₂O₅‐TiO₂‐NiO was investigated at different molar ratios Rb/P = 0.5‐1.3, fixed Ti/P = 0.15, Ti/Ni = 1.0 at temperature range 1073–953 K. The conditions of formation of complex phosphates RbTi₂(PO₄)₃, Rb₂Ni_0.5Ti_1.5(PO₄)₃ and RbNiPO₄ have been determined. The new phosphate Rb₂Ni_0.5Ti_1.5(PO₄)₃ (space group P2₁3, a = 9.9386(2) Å) has been obtained and investigated by the single crystal X‐ray diffraction and FTIR‐spectroscopy. It has langbeinite‐like structure, that is built up from mixed (Ni/Ti)O₆‐octahedra and РО₄‐tetrahedra. Rubidium atoms are located in closed cavities of 3D‐framework.     

Optical properties of non‐centrosymmetric mixed crystals K2(La1‐x Cex)(NO3)5 · 2 H2O (x = 0.0 – 1.0)

Large single crystals of optical quality of the non‐centrosymmetric orthorhombic potassium rare earth nitrate mixed crystals K₂(La_1–x Ce_x)(NO₃)₅ · 2 H₂O were grown at 38 °C from diluted HNO₃. For crystals with x = 0.0, 0.19, 0.38 and 0.66 refractive indices and their dispersion were determined with an error less than 1 · 10^–4 in the wavelength range 0.404 – 1.083 μm by the prism method. Phase matching conditions for collinear SHG frequency conversion were analysed in detail, including calculation of the effective nonlinear optical susceptibility. By an appropriate choice of the fraction x of cerium the mixed crystals K₂(La_1–x Ce_x)(NO₃)₅ · 2 H₂O allow an adjustment of non‐critical type I phase matching conditions to a desired wavelength of the fundamental wave within the range 1.055(4) – 1.107(6) μm. Non‐critical type II phase matching can be tuned in the wavelength range 0.949(2) – 0.931(2) μm. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Structure and morphological stability of (Lu1–xEux)2O3 thin films

(Lu_1–xEu_x)₂O₃ smooth, crack‐free, transparent films were prepared by the Pechini sol–gel method and a spin‐coating technique. Thermogravimetric analysis, differential thermal analysis and FITR spectroscopy were used to study the chemical processes during annealing of the films. Film structure, morphology and optical properties were investigated. X‐ray diffraction (XRD) analysis reveals the cubic phase of (Lu_1–xEu_x)₂O₃ films annealed in the 600–1000 °C temperature range. Smooth and crack‐free films with thicknesses of 250–1000 nm were obtained in the 600–800 °C temperature range. The thickness upper limit (1000 nm) of morphological stability of films (Lu_1–xEu_x)₂O₃ on sapphire substrates has been studied.     

The struvite‐type compounds M [Mg(H2O)6](X O4), where M = Rb,Tl and X = P,As

Phases with composition M [Mg(H₂O)₆](X O₄), where M = Rb, Tl and X = P, As, were obtained by means of the gelatine‐gel diffusion technique from Mg‐EDTA and corresponding metal phosphate/arsenate solutions at pH > 9. The crystal structures were determined from single crystal X‐ray diffractometer data sets. All compounds crystallize isotypically with two formula units in the orthorhombic struvite [NH₄[Mg(H₂O)₆](PO₄)] structure type in space group Pmn 2₁ and with lattice parameters of a ≈ 6.88, b ≈ 6.16, c ≈ 11.34 Å. The structures consist of slightly distorted [Mg(OH₂)₆] octahedra (m symmetry), X O₄ tetrahedra (m symmetry) and [M O₁₀] polyhedra (m symmetry) as single building units, held together by an intricate hydrogen bonding network. The structure can also be described as made up of closed packed pseudo ‐hexagonal layers of [Mg(OH₂)₆] units stacked along [010] with the X O₄ tetrahedra and the M atoms in the voids of this arrangement. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Phase formation in molten system (Na/K)2O‐TiO2‐P2O5. Crystal structures of NASICON and langbeinite‐related phosphates (K/Na)1+xTi2(PO4)3 (x = 0 and 0.357)

Crystallization of high temperature self‐flux of system Na₂O‐K₂O‐TiO₂‐P₂O₅ was investigated at different molar ratios (Na+K)/P = 0.9; 1.0 or 1.2 and Na/K = 1.0 or 2.0 over the temperature range 1000–650°C. The conditions of formation of complex phosphates K_0.10Na_0.90Ti₂(PO₄)₃ (NASICON‐related) and K_0.877Na_0.48Ti^ІІІ_0.357Ti^ІV_1.643(PO₄)₃ (langbeinite‐related) have been established. The new obtained compounds were investigated using FTIR‐spectroscopy, powder and single crystal X‐ray diffraction and optical microscopy methods. The influence of alkaline metal nature on the structure formation of complex phosphates in the high temperature self‐fluxes is discussed.     

Synthesis and characterization of phosphates in the pseudo‐ternary melted systems Cs2O‐P2O5‐MIIO (MII – alkaline earth)

The crystallization of alkali‐earth phosphates in the melts of Cs₂O‐P₂O₅‐M^IIO (M^II – Ca, Sr, Ba) pseudo‐ternary systems have been investigated at various Cs/P molar ratios and at fixed value of M^II/P equal to 0.15. Type of the phosphate which crystallizes in melts depends on the Cs/P initial ratio. Crystallization fields of CsM^IIP₃O₉, M^II₂P₂O₇ and Cs₂M^IIP₂O₇ were briefly investigated and characterized. The new diphosphate Cs₂CaP₂O₇ has been obtained and investigated by the single crystal and powder X‐ray diffraction and FTIR‐ spectroscopy. It crystallizes in C 2/m space group, with the following parameters of the monoclinic cell: a = 10.261(2), b = 5.9316(12), c = 7.2404(14) Å, β = 118.54(3)°. The architecture of [CaP₂O₇]^2‐ anionic sublattice, which is built up from [CaO₆] octahedra and [P₂O₇] bitetrahedra, interlinked via the common oxygen vertices, gives rise to formation of hexagonal tunnels along crystallographic direction b, where caesium atoms are located. One of the most remarkable features of the structure is specific positional disorder of the diphosphate group, which is connected with the existence of two equiprobable half‐occupied sites of the bridging oxygen. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystallization of MIGe2(PO4)3 (MI – Na,K, Ag) from molten phosphate media

A number of NASICON‐related M^IGe₂(PO₄)₃ (M^I – Na, K, Ag) have been prepared using a high‐temperature solution method in the molten system M^I‐Ge‐P‐O (M^I – Na, K) based on the solubility data for GeO₂ at 1123 K for the Na‐P‐O system and 1173 K for the K‐P‐O one. The single crystals of AgGe₂(PO₄)₃ were obtained after crystallization of a melt with Ag/P = 1.4. It crystallizes in the trigonal system, space group R‐3, cell parameters a = 8.06340(1) Å, c = 21.8385(4) Å, Z = 6. The framework is built up from two GeO₆ units that are isolated from each other by PO₄ tetrahedra to form the main building block of the structure [Ge₂(PO₄)₃]⁻. Two types of silver cations M1 and M2 are found to have different coordination requirements shown by the bond valence sum calculations.     

Dielectric relaxation and morphologic properties of CaCu3Ti4O12 doped with GeO2

CaCu₃Ti₄O₁₂ (CCTO) is a material with giant dielectric constant, presenting good stability over a wide temperature and frequency ranges. The preparation method and doping has a great influence on the microstructure and dielectric properties of this material. In this work, doping CCTO with 2–10 wt% GeO₂ has been shown to increase the dielectric constant. We studied the prepared samples by X-ray diffraction (XRD), scanning electron microscopy (SEM) and impedance spectroscopy. X-ray diffraction shows the presence of nanocristals. Grains and grain boundaries compositions have been observed by scanning electron microscopy with energy dispersive X-ray spectrometry mapping. Impedance spectroscopy measurements, in the frequency range from 75 kHz to 30 MHz, and temperature from 250 to 325 K, have been performed. The data were analyzed using the Cole–Cole model of dielectric relaxation.     

Re‐determination of the pseudobinary system Li2O – MoO3

The quasi‐binary phase diagram lithium oxide – molybdenum(VI) oxide was investigated by differential scanning calorimetry and X‐ray diffraction. The four intermediate phases Li₄MoO₅, Li₂MoO₄, Li₄Mo₅O₁₇, and Li₂Mo₄O₁₃ show incongruent melting. The system has one eutectic point at 50.5 mol% MoO₃ and 49.5 mol% LiO_0.5 with a eutectic temperature of 524.6°C. At this point the melt is in equilibrium with Li₂MoO₄ and Li₄Mo₅O₁₇. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and crystal growth of sillenite phases in the Bi2O3 ‐ TiO2 ‐ Nb2O5 system

The synthesis of Bi₂O₃‐Nb₂O₅ sillenite phase (BNbO) and the solubility of this phase with Bi₁₂TiO₂₀ was investigated by solid‐state reaction synthesis and niobium doped Bi₁₂TiO₂₀ (BTO:Nb) crystals were grown by the Top Seeded Solution Growth (TSSG) technique. The structures of polycrystalline compounds were checked by X‐ray powder diffraction method at room temperature. The correct composition of the sillenite phase stabilized with niobium was determined as Bi₁₂[Nb_0.17Bi_0.83]O_19.7 (BNbO) with unit cell parameter a = 10.261(2) Å. The system BTO‐BNbO is poorly soluble, but niobium doped BTO crystals were grown from the liquid composition 10Bi₂O₃ : xTiO₂ : (1‐x)/2 Nb₂O₅, with x = 0.95 and 0.90. A niobium concentration limit in the liquid phase is established in order to grow BTO:Nb with good crystalline quality. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal and molecular structure of 1‐allyl‐5‐(4‐methylbenzoyl)‐4‐(4‐methylphenyl)pyrimidine‐2(1H)‐thione

The crystal structure of 1‐allyl‐5‐(4‐methylbenzoyl)‐4‐(4‐methylphenyl)pyrimidine‐2(1H)‐thione (C₂₂H₂₀N₂OS) has been determined from three dimensional single crystal X‐ray diffraction data. The title compound crystallizes in the monoclinic space group P 2₁/c, with a = 10.6674(13), b = 10.1077(7), c = 17.9467(19) Å, β = 98.460(9)°, V = 1914.0(3) ų, D_calc = 1.251 g cm^–3, Z = 4. In the title compound, the allyl group shows positional disorder. Molecules are linked by C‐H···O, C‐H···N and C‐H···S intermolecular interactions forming two‐dimensional network. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The 0.96(Bi0.5Na0.5)TiO3 – 0.04BaTiO3 crystal structure: A high‐Q,high‐counting statistics synchrotron diffraction analysis

A synchrotron powder diffraction experiment, especially designed to shed light on the controversial problem of the crystal structure of 0.96(Bi_0.5Na_0.5)TiO₃ – 0.04BaTiO₃, is reported. The investigated material is a key component of the current international search for lead‐free ferro‐piezoelectrics. A wide angular range diffraction pattern was measured in high resolution configuration, with emphasis on trustable counting stastistics in the high‐Q interval. Cc and R3c structural models were tried as primary phases. The obtained experimental results are incompatible with the monoclinic model and clearly favor the rhombohedral symmetry.     

Progress in the growth of CaCu3Ti4O12 and related functional dielectric perovskites

Calcium copper titanate, CaCu₃Ti₄O₁₂, (CCTO), a potential electro-ceramic is a member of a very important perovskite family and has been found to a show dielectric constant of the order of 10⁴–10⁵. It has a remarkable ability to undergo a series of cationic exchange reactions resulting in corresponding isomorphs. In the past decade there has been immense activity in the search of an isomorph of CCTO with high dielectric constant and low loss which enables its use as capacitor material for the storage of energy and miniaturization of electronic based equipment. Despite intensive research in the area there is no source of any literature that gives all the possible relevant information regarding various synthetic methods, characterizations, effect of sintering parameters (temperature, duration, and atmosphere). This review article is an effort to review the synthesis, grain growth, morphological evolution, effect of impurities, substitution and interface anisotropy on the dielectric constant, resistivity and other materials parameters.     

Crystal Structure of (Cr,Cu)(Sr,La)2(La,A)Cu2O8‐δ (1212‐type) and (Cr,Cu)Sr2(Y,Ce)2Cu2O10‐δ (1222‐type) Phases

Conditions of the synthesis, crystal structures, mechanical properties, electrical resistivities and magnetizations of cuprates with the general formula (Cr,Cu)(Sr,La)₂(La,A)Cu₂O_8‐δ where A=Ca or Sr of 1212‐type and (Cr,Cu)Sr₂(Y,Ce)₂Cu₂O_10‐δ of 1222‐type were investigated. The compositions of the cuprates and an amount of the impurity phases in the samples were determined. Rietveld refinement of the structure was carried out. It was found that the formal charges of Cu (FC_Cu) calculated from the electroneutrality of refined phase compositions do not achieve value optimal for the appearence of superconducting phases.     

Magneto‐transport properties of polycrystalline YBa2(Cu1‐xMx)3O7‐δ (M = B and Mn)

The magnetic and transport properties of polycrystalline YBa₂ (Cu_1‐xM_x)₃ O_7‐δ (M = B and Mn) superconductor was investigated. Samples of YBa₂(Cu_1‐xB_x)₃O_7‐δ doped with several concentrations of boron B(x = 0.05 and 0.1) were investigated using magnetization measurements. A YBa₂(Cu_1‐xMn_x)₃O_7‐δ sample doped with Mn with concentration of x = 0.02 was investigated using current‐voltage (I‐V) measurements. Our results on the YBa₂(Cu_1‐xB_x)₃O_7‐δ samples reveal a considerable increase in the hysterisis width of the magnetization, M versus the applied magnetic field H with increasing boron concentration. The lower critical field was also found to be enhanced by boron doping. The critical current density, J_c was found to be significantly enhanced in the Mn‐doped sample. The enhancement of J_c was found to be more significant at the lower temperatures for all applied magnetic fields used (0 Oe, 300 Oe, and 500 Oe). Thus, chemical doping is suggested to enhance the vortex pinning forces in the YBCO samples. From the resistivity (R‐T) measurements, chemical doping of the samples was found to have no significant effect on the critical temperature, T_c. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal structure of N‐[(1Z)‐1‐(3‐methyl‐3‐phenylcyclobutyl)‐2‐thiomorpholin‐4‐ylethylidene] thiourea

The crystal structure of N‐[(1Z)‐1‐(3‐methyl‐3‐phenylcyclobutyl)‐2‐thiomorpholin‐4‐ylethylidene] thiourea (C₁₈H₂₆N₄S₂) has been determined by X‐ray crystallographic techniques. The compound crystallizes in the orthorhombic space group Pbca, with unit cell parameters: a = 15.692(3), b = 20.803(8), c = 11.979(6)Å, Z = 8, V = 3911(7)ų. The crystal structure was solved by direct methods and refined by full‐matrix least squares to a final R‐value of 0.084 for 1447 observed reflections [I > 2σ ( I ) ]. In the thiosemicarbazide moiety, the S = C bond length is 1.656(6), N‐C‐N angle is 115.6(5)°. The crystal structure is stabilized by the intermolecular N‐H...S hydrogen bonds. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)