Morphology and mechanical properties of a novel amorphous polyamide/nanoclay nanocomposite

A novel amorphous polyamide/montmorillonite nanocomposite based on poly(hexamethylene isophthalamide) was successfully prepared by melt intercalation. Wide angle X-ray diffraction and transmission electron microscopy showed that organoclay containing quaternary amine surfactants with phenyl and hydroxyl groups was delaminated in the polymer matrix resulting in well-exfoliated morphologies even at high montmorillonite content. Differential scanning calorimetry results indicated that clay platelets did not induce the formation of a crystalline phase in this amorphous polymer. Tensile tests demonstrated that the addition of nanoclay caused a dramatic increase in Young's modulus (almost twofold) and yield strength of the nanocomposites compared with the homopolymer. The nanocomposites exhibited ductile behavior up to 5 wt % of nanoclay. The improvement in Young's modulus is comparable with semicrystalline aliphatic nylon 6 nanocomposites. Both the main chain amide groups and the amorphous nature of the polyamide are responsible for enhancing the dispersion of the nanofillers, thereby, leading to improved properties of the nanocomposites. The structure-property relationship for these nanocomposites was also explored. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2605–2617, 2008     

Investigation of clay modifier effects on the structure and rheology of supercritical carbon dioxide‐processed polymer nanocomposites

Superior property enhancements in polymer–clay nanocomposites can be achieved if one can significantly enhance the nanoclay dispersion and polymer–clay interactions. Recent studies have shown that nanoclays can be dispersed in polymers using supercritical carbon dioxide (scCO₂). However, there is need for a better understanding of how changing the clay modifier affects the clay dispersability by scCO₂ and the resultant nanocomposite rheology. To address this, the polystyrene (PS)/clay nanocomposites with “weak” interaction (Cloisite 93A clay) and “strong” interaction (Cloisite 15A clay) have been prepared using the supercritical CO₂ method in the presence of a co‐solvent. Transmission electron microscopy images and small‐angle X‐ray diffraction illustrate that composites using 15A and 93A clays show similar magnitude of reduction in the average tactoid size, and dispersion upon processing with scCO₂. When PS and the clays are coprocessed in scCO₂, the “dispersion” of clays appears to be independent of modifier or polymer–clay interaction. However, the low‐frequency storage modulus in the scCO₂‐processed 15A nanocomposites is two orders of magnitude higher than that of 93A nanocomposites. It is postulated that below percolation (solution blended composites), the strength of polymer–clay interaction is not a significant contributor to rheological enhancement. In the scCO₂‐processed nanocomposites the enhanced dispersion passes the percolation threshold and the interactions dictate the reinforcement potential of the clay–polymer–clay network. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 823–831, 2010     

Influence of the compatibilizer polarity and molar mass on the morphology and the gas barrier properties of polyethylene/clay nanocomposites

In this study, different modified polyethylenes with different molar masses and different modification rates were examined as compatibilizers to prepare high density polyethylene/organoclay nanocomposites. Nanocomposites having 5 wt % organo-modified clay and 20 wt % interfacial agent were prepared by melt blending. The effect of compatibilizer molar mass and polarity was investigated on the clay dispersion and on the gas barrier properties. It was observed that the amount of large and dense fillers aggregates was considerably reduced by introduction of an interfacial agent. The nanocomposite final morphology was governed by a diffusion/shear mechanism. A high degree of clay delamination was obtained with the high molar mass compatibilizers, whereas highly swollen clay aggregates resulted from the incorporation of the low molar mass interfacial agents. In the investigated nanocomposites series, the barrier properties could not be directly related to the clay dispersion state but resulted also from the matrix/clay interfacial interactions. A gas transport mechanism based on these both parameters was proposed to explain the barrier properties evolution in these low polar nanocomposites series. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2593–2604, 2008     

Crystallization behavior and thermal stability of poly(trimethylene terephthalate)/clay nanocomposites

Poly(trimethylene terephthalate) (PTT)/montmorillonite (MMT) nanocomposites were prepared by the solution intercalation method. Two different kinds of clay were organomodified with an intercalation agent of cetyltrimetylammonium chloride (CMC). X‐ray diffraction (XRD) indicated that the layers of MMT were intercalated by CMC, and interlayer spacing was a function of the cationic exchange capacity of clay. The XRD studies demonstrated that the interlayer spacing of organoclay in the nanocomposites depends on the amount of organoclay. From the results of differential scanning calorimetric analysis, it was found that clay behaves as a nucleating agent and enhances the crystallization rate of PTT. The maximum enhancement of the crystallization rate for the nanocomposites was observed in nanocomposites containing about 1 wt % organoclay with a range of 1–15 wt %. From thermogravimetric analysis, we found that the thermal stability of the nanocomposites was enhanced by the addition of 1–10 wt % organoclay. According to transmission electron microscopy, the organoclay particle was highly dispersed in the PTT matrix without a large agglomeration of particles for a low organoclay content (5 wt %). However, an agglomerated structure did form in the PTT matrix at a 15 wt % organoclay content. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2902–2910, 2003     

Studies on structure property relationship in a polymer–clay nanocomposite film based on (PAN)8LiClO4

A new combination of ionically conducting polymer–clay nanocomposites based on (PAN)₈LiClO₄ + x wt % montmorillonite (unmodified) clay has been prepared using the standard solution cast process. X-Ray diffraction (XRD) analysis reveals strong interaction of polymer salt complex (PS) with the montmorillonite matrix evidenced by changes in d₀₀₁ spacing of the clay and enhancement in the clay gallery width on composite formation possibly due to intercalation of polymer–salt complex into nanometric clay galleries. Evidences of such an interaction among polymer–ion–clay components of the composite matrix has also been observed in the Fourier transform infrared (FTIR) spectrum results. FTIR results clearly indicated cation (Li⁺) coordination at nitrile (CN) site of the polymer backbone along with appearance of a shoulder suggesting strong evidence of polymer–ion interaction. Addition of clay into the PS matrix has been observed to affect ion–ion interaction resulting from ion dissociation effect at low clay loading in the PNC films. Complex impedance spectroscopy (CIS) analysis has provided a response comprising of a semicircular arc followed by a spike attributed respectively, to the bulk conduction and electrode polarization at the interfaces. Electrical transport appears to be predominantly ionic (t_ion = 0.99) with significant improvement in the electrical conductivity and thermal stability properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2577–2592, 2008     

Understanding and controlling the structure of polypropylene/layered silicate nanocomposites

The miscibility and structure in polypropylene/layered silicate nanocomposites is systematically investigated utilizing a maleic-anhydride grafted polypropylene with a low degree of functionalization acting as the compatibilizer. The morphology of the hybrids can be modified from phase separated to almost completely exfoliated in a controlled way by varying the ratio α of the compatibilizer to the organophilized clay; this ratio α is found to be the most important parameter in determining the final structure whereas exfoliated structures can be obtained for α values of 9 or higher. Furthermore, utilization of a “masterbatch” procedure can enhance the degree of exfoliation even for smaller values of α; in that case, polypropylene is essentially mixed with the already dispersed “hairy” platelets. Investigation of the thermal stability of the micro- and nanocomposites shows that high degree of exfoliation is vital in increasing the temperature that the polymer starts to degrade. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2683–2695, 2008     

Clay dispersibility and mechanical property of the epoxy/clay nanocomposites prepared by different treatment methods

The bisphenol‐A type epoxy resin was combined with layered clays. Three types of epoxy/clay nanocomposites were prepared by different clay pretreatment methods, that is, the slurry (clay swelling with polar solvent), organo, and solubilization (organoclay swelling with polar solvent) methods. The organo and solubilization systems showed good dispersibility. The basal spacing of the layered clays in the obtained nanocomposites was evaluated by XRD and TEM observations. The basal spacing of the nanoclay in the solubilization system drastically increased. The mechanical properties were improved with the increase in the clay dispersion. A high modulus and fracture toughness were obtained by improvement of the clay dispersion into the matrix. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1753–1761, 2009     

Synthesis and physical properties of layered silicates/polyurethane nanocomposites

Samples of polyurethane nanocomposites were synthesized using diphenylmethane diisocyanate, poly(ε‐caprolactone) diol, di(ethylene glycol), and a clay functionalized by hydroxyl groups. The inorganic content in the hybrids was 2 wt %, 4 wt %, and 8 wt %. The X‐ray analysis showed that exfoliation occurred for clay content equal to 2% (w/w), whereas for higher contents, the inorganic phase rearranges in an intercalated structure. FTIR analysis suggested that the degree of hydrogen bonding in the hard segments was greatly reduced because of the amount of silicate layers and their dispersion. The dynamic‐mechanical analysis showed that the presence of clay lamellae extends very much the temperature range before the hard domain transition, causing the loss of mechanical consistency of the samples. It is less than 100 °C for the pure polymer, and increases up to 200 °C for the nanocomposites. The permeability of water vapor decreases linearly with inorganic content up to 4% of inorganic phase, and levels off at higher concentrations. The permeability behavior, at low activities, is largely dominated by the diffusion phenomenon. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2454–2467, 2005     

Deformation mechanisms of nanoclay‐reinforced maleic anhydride‐modified polypropylene

Fracture properties and deformation mechanisms of nanoclay‐reinforced maleic anhydride‐modified polypropylene (MAPP) were investigated. Elastic–plastic fracture mechanics was employed to characterize the toughness in light of substantial postyield deformation for the reinforced MAPP. Upon introduction of 2.5 wt % clay loading in maleated MAPP, it was observed that tensile strength, modulus, and fracture initiation toughness concomitantly increased substantially. Continued increase in clay loading thereafter only led to stiffening and strengthening effects to the detriment of fracture toughness. A plot of the J‐integral initiation fracture toughness versus the plastic zone size demonstrated that toughening arose from plastic deformation in the reinforced matrix. Careful examination of deformed tensile specimens using small angle X‐ray scattering (SAXS) showed 2.5 wt % clay gave rise to the highest equatorial scattering, which indicates the presence of microvoids in the matrix. The SAXS results were consistent with that shown in subcritically loaded crack‐tip deformation zone using transmission electron microscopy. Thus, both macroscale three‐point bend fracture data and SAXS results led us to consistent findings and conclusions. Further increase in clay loading above 2.5 wt % reduced the scattering the matrix plasticity and thus the fracture toughness. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2759–2768, 2004     

Investigation of the effects of silicate modification on polymer‐layered silicate nanocomposite morphology

The morphological behavior of a series of polymer‐layered silicate nanocomposites (PLSNs) has been investigated. The goal was to probe the effect of “textured” silicate surfaces on PLSN morphology. The nanocomposites were fabricated by mixing montmorillonite clay that was carefully modified with tailor‐made polystyrene (PS) surfactants into a PS homopolymer matrix, where the chemical similarity of the matrix polymer and surfactants assures complete miscibility of surfactant and homopolymer. To examine the effect of silicate surface “texture,” clay was modified with combinations of long and short surfactants. The samples were then direct melt annealed to allow the equilibrium morphology to develop, and characterized by small‐angle X‐ray scattering. Based on the implications of the Balazs model and other work on the wetting behavior of polymer melts with longer surfactants and textured surfaces we expected that the intercalation of the homopolymer matrix material into the modified clay would be promoted. Extensive characterization of both the modified clays as well as the resultant nanocomposites clearly show that the modified clays exhibit a high degree of order, but also that only phase‐separated morphologies are formed in the corresponding nanocomposites. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4075–4083, 2004     

Polyethylene-Montmorillonite Nanocomposites: Preparation,Characterization and Properties

Polyethylene(PE)/clay nanocomposites have been successfully prepared by in situ polymerization with an intercalation catalyst titanium-montmorillonite (Ti-MMT) and analyzed by X-ray diffraction analysis (XRD), Fourier transform infrared analysis (FT-IR), Transmission electron microscopy (TEM), differentail scanning calorimetry (DSC), thermal gravimetric analysis (TGA) and tensile testing. XRD and TEM indicate that the clay is exfoliated into nanometer size and disorderedly dispersed in the PE matrix, and the PE crystallinity of PE/clay nanocomposite declines to 15∼30%. Compared with pure PE, PE/clay nanocomposites behave higher thermal, physical and mechanical properties; the layer structure of the clay decreases the polymerization activity and produce polymer with a high molecular weight. For PE/clay nanocomposites, the highest tensile strength of 33.4 MPa and Young's modulus of 477.4 MPa has been achieved when clay content is 7.7 wt %. The maximum thermal decomposition temperature is up to 110 °C higher, but the thermal decomposition temperature of the PE/clay nanocomposites decreases with the increases of the clay contents in the PE matrix.     

Interactions of hydrophilic plasticizer molecules with amorphous starch biopolymer—an investigation into the glass transition and the water activity behavior

In this article, we demonstrated that within a hydrophilic biopolymer–plasticizer system, the molecular “activity” of the plasticizer also influenced the extent of these interactions. We demonstrated through an analysis of crystallinity and calorimetry results that the equilibrium moisture content within the starch matrix can preferentially interact with the hydrophilic plasticizers and modify the polymer recrystallization process to an extent that the commonly acknowledged relationship between the crystallinity and the glass transition behavior is disrupted. Two plasticizers, glycerol (three ? OH groups) and xylitol (five ? OH groups), were selected. The water sorption isotherm of polymer samples with 5–20 wt % (dry basis) plasticizers were examined across a water activity range from ～0.11 to ～0.95 and using Guggenheim‐Anderson‐de Boer analysis, we compared the molar sorption enthalpies of various starch–plasticizer mixtures. Finally, the competitive plasticization between water and plasticizer molecules at different water activities was also discussed using known glass transition models. The analyses validated the antiplasticization limit for glycerol to be ～10–15 wt %, but for xylitol, its antiplasticization behavior did not manifest till 20 wt %. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Influence of interaction between poly(methyl methacrylate) and clay on the properties of nanocomposites prepared by a heterocoagulation method

To have a better insight into the effect of interaction between polymer matrix and clay on the properties of nanocomposite, poly(methyl methacrylate)/clay nanocomposites were prepared by a heterocoagulation method. Using a reactive cationic emulsifier, methacryloyloxyethyltrimethyl ammonium chloride (METAC), a strong polymer–clay interaction was obtained with the advantage of keeping a consistent polymer matrix property. X‐ray diffraction and transmission electronic microscopy indicated an exfoliated structure in nanocomposites. The glass transition temperature (T_g) of the nanocomposites was measured by DSC and DMA. The DMA results showed that with a strong interaction, PMMA–METAC nanocomposite showed a 20 °C enhancement in glass transition temperature (T_g), whereas a slight increase in T_g was observed for PMMA–cetyl trimethylammonium bromide (CTAB)/clay nanocomposite with a weak interaction. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 733–738, 2010     

Synthesis,rheology, and morphology of nylon‐11/layered silicate nanocomposite

Exfoliated nylon‐11/layered silicate nanocomposites were prepared via in situ polymerization by dispersing organoclay in 11‐aminoundecanoic acid monomer. The original clay was modified by a novel method with 11‐aminoundecanoic acid. In situ Fourier transform infrared spectroscopy results show that stronger hydrogen bonds exist between nylon‐11 and organoclay than that of between nylon‐11 and original clay. The linear dynamic viscoelasticity of organoclay nanocomposites was investigated. Before taking rheological measurements, the exfoliated and intercalating structures and the thermal properties were characterized using X‐ray diffraction, transmission electron microscopy, differential scanning calorimetry, and thermogravimetric analysis. The results show that the clay was uniformly distributed in nylon‐11 matrix during in situ polymerization of clay with 4 wt % or less. The presence of clay in nylon‐11 matrix increased the crystallization temperature and the thermal stability of nanocomposites prepared. Rheological properties such as storage modulus, loss modulus, and relative viscosity have close relationship with the dispersion favorably compatible with the organically modified clay. Comparing with neat nylon‐11, the nanocomposites show much higher dynamic modulus and stronger shear thinning behavior. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2161–2172, 2006     

Thermal and mechanical properties of syndiotactic polystyrene/organoclay nanocomposites with different microstructures

The fabrication of syndiotactic polystyrene (sPS)/organoclay nanocomposite was conducted via a stepwise mixing process with poly(styrene‐co‐vinyloxazolin) (OPS), that is, melt intercalation of OPS into organoclay followed by blending with sPS. The microstructure of nanocomposite mainly depended on the arrangement type of the organic modifier in clay gallery. When organoclays that have a lateral bilayer arrangement were used, an exfoliated structure was obtained, whereas an intercalated structure was obtained when organoclay with a paraffinic monolayer arrangement were used. The thermal and mechanical properties of sPS nanocomposites were investigated in relation to their microstructures. From the thermograms of nonisothermal crystallization and melting, nanocomposites exhibited an enhanced overall crystallization rate but had less reduced crystallinity than a matrix polymer. Clay layers dispersed in a matrix polymer may serve as a nucleating agent and hinder the crystal growth of polymer chains. As a comparison of the two nanocomposites with different microstructures, because of the high degree of dispersion of its clay layer the exfoliated nanocomposite exhibited a faster crystallization rate and a lower degree of crystallinity than the intercalated one. Nanocomposites exhibited higher mechanical properties, such as strength and stiffness, than the matrix polymer as observed in the dynamic mechanical analysis and tensile tests. Exfoliated nanocomposites showed more enhanced mechanical properties than intercalated ones because of the uniformly dispersed clay layers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1685–1693, 2004     

Effect of flocculated structure on rheology of poly(butylene terephthalate)/clay nanocomposites

The microstructure and rheological property of poly(butylene terephthalate) (PBT)/epoxy/montmorillonite nanocomposites (PCNs) were investigated. For the study, PCNs were prepared by melt intercalation in clay content of 4 wt % and, epoxy loadings were varied from 2 to 4 wt %. The intercalated PCNs are characterized by different techniques such as transmission electron microscopy, Fourier transform infrared and rheology. It is interesting that the percolated tactoids network in the ternary hybrids becomes insensitive to the shear deformation with the addition of epoxy in contrast to that in the sample without epoxy, which can be attributed to the formation of a flocculated structure of clay tactoids because of the chain‐extension reactions between PBT matrix and epoxy and possible hydrogen bonding. The flocculated structure has influence on the rheological behavior of the hybrids remarkably, strengthening the percolated strong‐associated‐tactoids network and reducing the percolation threshold, while not changing the strain‐scaling. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2807–2818, 2005     

Transport and mechanical properties of blends of poly(ϵ‐caprolactone) and a modified montmorillonite‐ poly(ϵ‐caprolactone) nanocomposite

The structural characterization and transport properties of blends of a commercial high molecular weight poly(?‐caprolactone) with different amounts of a montmorillonite‐poly(?‐caprolactone) nanocomposite containing 30 wt % clay were studied. Two different vapors were used for the sorption and diffusion analysis—water as a hydrophilic permeant and dichloromethane as anorganic permeant—in the range of vapor activity between 0.2 and 0.8. The blends showed improved mechanical properties in terms of flexibility and drawability as compared with the starting nanocomposites. The permeability (P), calculated as the product of the sorption (S) and the zero‐concentration diffusion coefficient (D₀), showed a strong dependence on the clay content in the blends. It greatly decreased on increasing the montmorillonite content for both vapors. This behavior was largely dominated by the diffusion parameters. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1118–1124, 2002     

Amine‐cured epoxy/clay nanocomposites. I. Processing and chemical characterization

The processing of nanocomposite materials composed of amine‐cured diglycidyl ether of bisphenol A (DGEBA) reinforced with organomontmorillonite clay is reported. A novel sample preparation scheme was used to process the modified clay in the glassy epoxy network, resulting in nanocomposites where the clay was both exfoliated and intercalated by the epoxy network. The processing scheme involves sonication of the constituent materials in a solvent, followed by solvent extraction to generate a composite with homogeneous dispersions of the nanoclay. Fourier transform infrared spectroscopy (FTIR) and Fourier transform (FT‐)Raman spectroscopy confirmed that the chemical structure of the epoxy network was not affected by the use of solvents in this processing scheme. The glass‐transition temperature, T_g, linearly increased with an increased weight ratio of the nanoclay. The microstructure of clay nanoplatelets in the composites was observed with transmission electron microscopy (TEM), wide‐angle X‐ray scattering (WAXS), and small‐angle X‐ray scattering (SAXS). It was found that the clay nanoplatelets were well‐dispersed, and were intercalated as well as exfoliated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4384–4390, 2004     

Synthesis and characterization of polyethylene/clay–silica nanocomposites: A montmorillonite/silica‐hybrid‐supported catalyst and in situ polymerization

A novel approach to the preparation of polyethylene (PE) nanocomposites, with montmorillonite/silica hybrid (MT‐Si) supported catalyst, was developed. MT‐Si was prepared by depositing silica nanoparticles between galleries of the MT. A common zirconocene catalyst [bis(cyclopentadienyl)zirconium dichloride/methylaluminoxane] was fixed on the MT‐Si surface by a simple method. After ethylene polymerization, two classes of nanofillers (clay layers and silica nanoparticles) were dispersed concurrently in the PE matrix and PE/clay–silica nanocomposites were obtained. Exfoliation of the clay layers and dispersion of the silica nanoparticles were examined with transmission electron microscopy. Physical properties of the nanocomposites were characterized by tensile tests, dynamic mechanical analysis, and DSC. The nanocomposites with a low nanofiller loading (<10 wt %) exhibited good mechanical properties. The nanocomposite powder produced with the supported catalyst had a granular morphology and a high bulk density, typical of a heterogeneous catalyst system. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 941–949, 2004     

Synthesis and characterization of organosoluble,thermoplastic elastomer/clay nanocomposites

We synthesized organosoluble, thermoplastic elastomer/clay nanocomposites by making a jelly like solution of ethylene vinyl acetate containing 28% vinyl acetate (EVA‐28) and blending it with organomodified montmorillonite. Sodium montmorillonite (Na⁺‐MMT) was made organophilic by the intercalation of dodecyl ammonium ions. X‐ray diffraction patterns of Na⁺‐MMT and its corresponding organomodified dodecyl ammonium ion intercalated montmorillonite (12Me‐MMT) showed an increase in the interlayer spacing from 11.94 to 15.78 Å. However, X‐ray diffraction patterns of the thermoplastic elastomer and its hybrids with organomodified clay contents up to 6 wt % exhibited the disappearance of basal reflection peaks within an angle range of 3–10°, supporting the formation of a delaminated configuration. A hybrid containing 8 wt % 12Me‐MMT revealed a small hump within an angle range of 5–6° because of the aggregation of silicate layers in the EVA‐28 matrix. A transmission electron microscopy image of the same hybrid showed 3–5‐nm 12Me‐MMT particles dispersed in the thermoplastic elastomer matrix; that is, it led to the formation of nanocomposites or molecular‐level composites with a delaminated configuration. The formation of nanocomposites was reflected through the unexpected improvement of thermal and mechanical properties; for example, the tensile strength of a nanocomposite containing only 4 wt % organophilic clay was doubled in comparison with that of pure EVA‐28, and the thermal stability of the same nanocomposite was higher by about 34 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2065–2072, 2002