Design of advanced multicomponent ferroelectric liquid crystalline mixtures with submicrometre helical pitch

New functional multicomponent ferroelectric liquid crystalline mixtures have been designed while searching smart self-assembling materials with submicrometre periodicity of the helical structure responding definite demands for application in electro-optic devices and photonics that exploit the deformed helix ferroelectric effect. The resulting designed mixtures possess the paraelectric smectic A* and the tilted ferroelectric smectic C* phases over a very broad temperature range down below the room temperature. The mesomorphic, electro-optic and dielectric properties have been studied and discussed. The presence of a very stable enantiotropic ferroelectric smectic phase exhibiting almost temperature independent helical pitch within 150–250 nm range and reasonably high values of the tilt angle might allow these mixtures to be applicable for practical purposes.     

Preparation and electro‐optical properties of polymer dispersed liquid crystal films with relatively low liquid crystal content

In this paper, polymer dispersed liquid crystals (PDLC) films with LC content as low as 40 wt% were prepared, and the electro‐optical properties were carefully investigated. To accomplish this, different (meth)acrylate copolymerizaiton monomers have been used. The electro‐optical properties and morphologies of the PDLC films were strongly influenced by the chemical structure of copolymerization monomers (hydroxypropyl methacrylate (HPMA), glycidyl methacrylate, hydroxypropyl acrylate) and their feed ratio. Lower driven voltage and higher contrast ratio were achieved when the PDLC films showed a morphology with suitably LC domain size. At high HPMA content, a thin polymer film was formed on the surface of PDLC samples, which is beneficial to decrease the total LC content in PDLC devices. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of liquid crystalline poly(1‐pentyne)s and fabrication of polyacetylene–perovskite hybrids

Poly(1‐pentyne)s containing biphenyl and phthalimido pendant groups with different spacer lengths {P 1 (m); ? [HC?C(CH₂)₃O? Biph? OCO(CH₂)_mN(CO)₂C₆H₄]_n? , Biph?4,4′? biphenylyl; m = 7, 10} are synthesized in satisfactory yields by WCl₆‐Ph₄Sn catalyst in toluene at elevated temperatures. The structures and properties of the polymers are characterized and evaluated by IR, NMR, TGA, DSC, POM, and XRD analyses. Both of the polymers are thermally stable (T_d ≥ 300 °C) and exhibit nematicity at high temperatures. Their phthalimido groups are converted into amino groups by hydrolysis, which can, after acidification, complex with lead(II) bromide to furnish polyacetylene–perovskite hybrids in high yields. The organic components contribute good solubility to the hybrids, while the perovskite framework induces the polyacetylene chains to align within the inorganic sheets. The hybrids emit a strong UV light of 374 nm upon photoexcitation, whose quantum yield increases with an increase in the spacer length. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3538–3550, 2006     

Synthesis and dielectric properties of novel liquid crystalline triblock copolymers with cyanobiphenyl moieties and poly(n‐butyl acrylate) segments

In this work, self‐assembly method was used to improve the dielectric constant of triblock copolymers. A series of ABA triblock copolymers with a defined length of poly(n‐butyl acrylate) (PBA, B block) segment and different lengths of liquid crystalline (LC) poly[11‐(4‐cyano‐4′‐biphenoxy)undecyl methacrylate] (P11CBMA, A block) segments were synthesized by using the atom transfer radical polymerization method. The well‐defined triblock copolymers P11CBMA_m‐b‐PBA_n‐b‐P11CBMA_m possess three different B/A ratios (n = 50, m = 17, 43, 53). Due to the supramolecular cooperative motion effect, the copolymers can form worm‐like microstructure (W_LC = 52.8%), cylinder‐like nanostructure with P11CBMA phase embedded in PBA matrix (W_LC = 73.9%), and wide stripe structure with LC domains distributed unevenly in a continuous PBA matrix (W_LC = 77.7%) after annealed at 160°C (above T_i) under N₂ for 24 h, respectively. In order to study the influence of microphase separated morphology of triblock copolymer on the dielectric properties, solvent annealing was also used to develop various nanostructures. After thermal or solvent annealing, the dielectric constants of block copolymers increased dramatically while their loss factors remained the same. For different block copolymers, the dielectric constants increased with the increase of the LC block length. For diverse treatments, dielectric permittivities of samples varied widely with different nanostructures. The results show that the dielectric constants of block copolymers could be tuned by the block ratios and the self‐assembled microstructures. These findings will inspire researchers using self‐assembly method to design and develop novel flexible materials with high dielectric permittivity. Copyright © 2014 John Wiley & Sons, Ltd.     

Thermal and ionic‐conductive behaviors of liquid crystalline polymers with alkali metal salt

In order to investigate the relationship between ionic conductivity and liquid crystallinity, we prepared the main‐chain type polyester having 1,4‐bisstyrylbenzene units and ethyleneoxide chain in the repeating unit. The main‐chain type polyester with lithium salt at the ratio of 0.04 per polymer repeating unit exhibited a smectic phase. However, the polyester with lithium salt (0.11) showed a nematic phase. The ionic conductivity of the polyester with lithium salt increased with increasing lithium salt concentration. The trans‐type polyester exhibited a liquid crystalline phase, while the cis‐type polyester did not show any mesophase. We found that the ionic conductivity of the trans‐type polyester with lithium salt (0.11) was larger than that of the cis‐type polyester with lithium salt (0.11). However, a liquid crystalline phase was found in the side‐chain type polyether with alkoxy chain length of below 12. A smectic phase was induced for the non‐mesomorphic polyethers with lithium salt. The layer spacing of the smectic A phase for the non‐mesomorphic polyether with lithium salt decreased from 55 to 41 Å with increasing temperature. The ionic conductivity of the polyether with lithium salt increased with decreasing the layer spacing. Copyright © 2001 John Wiley & Sons, Ltd.     

Dispersive liquid–liquid microextraction combined with high‐performance liquid chromatography for the enrichment and sensitive determination of Sudan Red pollutants in water samples

Sudan Red pollutants have gained more attention in recent years. The present study described a simple and sensitive determination method for Sudan Red pollutants with dispersive liquid–liquid microextraction coupled to high‐performance liquid chromatography. Chlorobenzene and ethanol were used as the extraction solvent and disperser solvent, respectively. The possible parameters such as the kind of solvents, ionic strength, and sample pH that could affect the enrichment have been optimized. Under the optimal conditions, the pollutants have been well enriched and the linear ranges of Sudan Red I and II were in the range of 0.3–40 μg/L, and the linear ranges of Sudan Red III and IV were in the range of 1.2–160 μg/L. The detection limits were in the range of 0.18–0.46 μg/L, and the precisions were in the range of 3.7–5.9%. All these demonstrated that the proposed method could be a good alternative for the routine analysis of Sudan Red pollutants in water samples.     

Core/shell quantum dots in ferroelectric liquid crystals matrix: effect of spontaneous polarisation coupling with dopant

In order to fabricate efficient and superior performance liquid crystal (LC) devices, the physical parameters of the LC mesogens can be duly altered by incorporating non-mesogenic materials like quantum dots (QDs), graphene and polymers. In the present work, the effect of adding core/shell QDs in two ferroelectric liquid crystals (FLCs), along with the change in their physical properties, has been investigated. A small concentration of QDs is dispersed into the two FLCs and temperature variations of vital parameters like spontaneous polarisation (P_s), rotational viscosity, response time, relative permittivity and relaxation strength have been measured for both the FLC materials. The contrast ratio, UV–near visible absorbance as well as photoluminescence (PL) of both the mesogens have also been determined and compared. A faster electro-optical response and the induced phenomenon of PL with a temperature-dependent low-frequency relaxation mode have been observed in Felix 17/100 after the addition of QDs. The present study also provides valuable information about the interaction between QDs and the two FLC systems depending upon polarisation–field (P–E) coupling. The same dopant can interact with FLCs in dissimilar fashion if the intrinsic properties of both the FLCs are different thereby producing different modifications in their respective physical parameters.     

Assembly of MOF Microcapsules with Size‐Selective Permeability on Cell Walls

The assembly of metal–organic frameworks (MOFs) into microcapsules has attracted great interest because of their unique properties. However, it remains a challenge to obtain MOF microcapsules with size selectivity at the molecular scale. In this report, we used cell walls from natural biomaterials as non‐toxic, stable, and inexpensive support materials to assemble MOF/cell wall (CW) microcapsules with size‐selective permeability. By making use of the hollow structure, small pores, and high density of heterogeneous nucleation sites of the cell walls, uniform and continuous MOF layers could be easily obtained by inside/outside interfacial crystallization. The prepared MOF/CW microcapsules have excellent stability and enable the steady, slow, and size‐selective release of small molecules. Moreover, the size selectivity of the microcapsules can be adjusted by changing the type of deposited MOF.     

Fluorene‐based liquid crystalline networks with linearly polarized blue emission

A series of fluorene‐based luminophores containing methacrylic end groups have been prepared and incorporated into uniaxially oriented liquid crystalline films by in situ photopolymerization. Various structural modifications on the 2‐(4‐cyanophenyl)fluorene core, which include alkyl chains at the 9‐position and elongation of the rigid core with one additional phenyl ring, have been investigated to generate emitters with adjusted liquid crystal compatibility, improved luminescence and dichroic properties. Polarized blue‐emitting films were produced that had an acceptable photostability, and it was found that the polarization emission was better for samples with low (5%) cross‐linker contents. Polarization of the luminescence was favored by the liquid crystalline properties of the luminophore. In addition, the detrimental effect of the alkyl substituent at the fluorene core on the mesomorphism and on the emission polarization can be overcome by lengthening the π‐system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4804–4817, 2007     

Synthesis and characterization of thermotropic liquid crystalline polyurethanes from 4,4′‐bis(6‐hydroxyhexoxy) biphenyl and aliphatic diols

A series of thermotropic liquid crystalline polyurethanes (LCPUs) were synthesized by the polyaddition reactions of 2,4‐toluene diisocyanate (2,4‐TDI) with 4,4′‐bis(6‐hydroxyhexoxy)biphenyl (BHHBP) and aliphatic diol. The intrinsic viscosities of the polymers were measured by Ubbelohde viscometer, and the chemical structure was confirmed by Fourier transform infrared spectroscopy (FT‐IR). The LCPUs were examined by differential scanning calorimetry (DSC), polarized optical microscopy (POM), wide angle X‐ray diffraction (WAXD), and thermogravimetric analysis (TGA). The intrinsic viscosities were 0.56–0.83 dl/g. According to the melting point (T_m) and the isotropic temperature (T_i) of the LCPUs, the temperature range of the liquid crystalline phase became wider with increased number of methylene spacers in the polyurethane. The LCPUs exhibited a nematic phase with a threaded texture and had a wide mesophase temperature range. The decomposition temperature of the LCPUs was >300°C. On WAXD, the LCPUs give a dispersing peak at 2θ ≈ 20°, and a strong diffraction peak at 2θ ≈ 25°. Copyright © 2008 John Wiley & Sons, Ltd.     

A mixed cyclodextrin‐biphenyl thermotropic liquid crystal: Synthesis,liquid‐crystalline properties,and supramolecular organization

A well‐defined structure liquid crystal heptakis [6‐deoxy‐6‐(1‐H‐1,2,3‐triazol‐4‐yl)(methyl)6‐(4‐methoxybiphenyl‐4′‐yloxy) hexanoyl]‐β‐cyclodextrin (H6B‐β‐CD) was synthesized from propargyl 6‐(4‐methoxybiphenyl‐4′‐yloxy) hexanoate (P6B) and heptakis (6‐deoxy‐6‐azido)‐β‐cyclodextrin ((N₃)₇‐β‐CD) by click reaction. The chemical structure of H6B‐β‐CD was confirmed by ¹H NMR, FTIR, and MALDI‐TOF MS. The thermal stability of the compound was investigated by thermogravimetric analysis (TGA). The liquid crystalline behavior was studied by differential scanning calorimetry (DSC), polarizing optical microcopy (POM), and wide‐angle X‐ray diffraction (WAXD) measurement. These investigations have shown that the supramolecular structure of H6B‐β‐CD are consisted of a large scale ordered lamellar structure and a small scale ordered structure (SmE) at low temperature region. As the temperature increases, the small scale structure becomes disordered relatively in the first instance, from smectic E to smectic A. Then, the lamellar structure collapses and nematic phase and isotropic phase are observed in sequence. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2838–2845, 2010     

Synthesis of conjugated polymers containing anthracene moiety and their electro‐optical properties

Both fully conjugated polymer poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐phenylene vinylene‐alt‐9,10‐anthrylene vinylene] [poly(MEHPV‐AV)] and conjugated/nonconjugated block copolymers poly(alkanedioxy‐2‐methoxy‐1,4‐phenylene‐1,2‐ethenylene‐9,10‐anthrylene‐1,2‐ehthenylene‐3‐methoxy‐1,4‐phenylene)[poly(BFMPx‐AV), (x = 4, 8, and 12)] were synthesized by Horner–Emmons reaction utilizing potassium tert‐butoxide. Of these synthesized polymers poly(BFMP4‐AV) and poly(BFMP8‐AV), which has four and six methylene groups as solubility spacer in the main chain exhibited liquid crystalline to isotropic transition in addition to the two first order transitions. Light‐emitting diode (LED)s made from the organic solvent soluble poly(BFMP12‐AV) as emitting layer showed blue shift in the emission spectrum compared to the one made from fully conjugated poly(MEHPV‐AV). Although poly(BFMP12‐AV) had higher barrier to the electron injection from cathode than poly(MEHPV‐AV), the luminance efficiency of LED made from poly(BFMP12‐AV) was about 25 times higher than the one made from poly(MEHPV‐AV), which had fully conjugated structure. LEDs fabricated by both poly(BFMP12‐AV) and poly(MEHPV‐AV) exhibited Stoke's shift in the range of 155 to 168 nm from the absorption maximum due to the excimer formation between the ground and excited state anthracene groups. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3173–3180, 2000     

A novel phosphorus‐containing thermotropic liquid crystalline poly(ester‐imide) with high flame retardancy

A novel phosphorus–nitrogen thermotropic liquid crystalline poly(ester‐imide) (PN‐TLCP) derived from p‐acetoxybenzoic acid (ABA), terephthalic acid (TPA), acetylated 2‐(6‐oxide‐6H‐dibenz<c,e><1,2>oxa phosphorin‐ 6‐yl)‐1,4‐dihydroxy phenylene (DOPO‐AHQ) and N,N'‐hexane‐1,6‐diylbis(trimellitimide) was prepared by melt transesterification. The chemical structure, the mesophase behavior, and the thermal properties of the copolymer were investigated with Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR), elemental analysis, wide‐angle X‐ray diffraction (WAXD), hot‐stage polarized light microscopy (PLM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). PN‐TLCP exhibited a nematic mesophase with a strong birefringence at a low and broad mesomorphic temperature ranging from 220 to 350°C, an initial flow temperature as low as about 190°C and a glass transition temperature of about 160°C. PN‐TLCP has also good thermal stability, high char residues and excellent flame retardancy (limiting oxygen index, LOI = 71 and UL‐94 V‐0 rating). Copyright © 2009 John Wiley & Sons, Ltd.     

Ordered nanostructures at two different length scales mediated by temperature: A triphenylene‐containing mesogen‐jacketed liquid crystalline polymer with a long spacer

A mesogen‐jacketed liquid crystalline polymer (MJLCP) containing triphenylene (Tp) moieties in the side chains with 12 methylene units as spacers (denoted as PP12V) was synthesized. Its liquid crystalline (LC) phase behavior was studied with a combination of solution ¹H NMR, solid‐state NMR, gel permeation chromatography, thermogravimetric analysis, polarized light microscopy, differential scanning calorimetry, and one‐ and two‐dimensional wide‐angle X‐ray diffraction. By simply varying the temperature, two ordered nanostructures at sub‐10‐nm length scales originating from two LC building blocks were obtained in one polymer. The low‐temperature phase of the polymer is a hexagonal columnar phase (Φ_H, a = 2.06 nm) self‐organized by Tp discotic mesogens. The high‐temperature phase is a nematic columnar phase with a larger dimension (a′ = 4.07 nm) developed by the rod‐like supramolecular mesogen—the MJLCP chain as a whole. A re‐entrant isotropic phase is found in the medium temperature range. Partially homeotropic alignment of the polymer can be achieved when treated with an electric field, with the polymer in the Φ_H phase developed by the Tp moieties. The incorporation of Tp moieties through relatively long spacers (12 methylene units) disrupts the ordered packing of the MJLCP at low temperatures, which is the first case for main‐chain/side‐chain combined LC polymers with MJLCPs as the main‐chain LC building block to the best of our knowledge. The relationship of the molecular structure and the novel phase behavior of PP12V has implications in the design of LC polymers containing nanobuilding blocks toward constructing ordered nanostructures at different length scales. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 295–304     

Ionic‐liquid‐based dispersive liquid–liquid microextraction coupled with high‐performance liquid chromatography for the forensic determination of methamphetamine in human urine

Determination of methamphetamine in forensic laboratories is a major issue due to its health and social harm. In this work, a simple, sensitive, and environmentally friendly method based on ionic liquid dispersive liquid–liquid microextraction combined with high‐performance liquid chromatography was established for the analysis of methamphetamine in human urine. 1‐Octyl‐3‐methylimidazolium hexafluorophosphate with the help of disperser solvent methanol was selected as the microextraction solvent in this process. Various parameters affecting the extraction efficiency of methamphetamine were investigated systemically, including extraction solvent and its volume, disperser solvent and its volume, sample pH, extraction temperature, and centrifugal time. Under the optimized conditions, a good linearity was obtained in the concentration range of 10–1000 ng/mL with determination coefficient >0.99. The limit of detection calculated at a signal‐to‐noise ratio of 3 was 1.7 ng/mL and the relative standard deviations for six replicate experiments at three different concentration levels of 100, 500, and 1000 ng/mL were 6.4, 4.5, and 4.7%, respectively. Meanwhile, up to 220‐fold enrichment factor of methamphetamine and acceptable extraction recovery (>80.0%) could be achieved. Furthermore, this method has been successfully employed for the sensitive detection of a urine sample from a suspected drug abuser.     

Synthesis and characterization of hydrogen‐bonded thermotropic liquid crystalline aromatic‐aliphatic poly(ester–amide)s from amido diol

Fifteen highly regular hydrogen‐bonded, novel thermotropic, aromatic‐aliphatic poly(ester–amide)s (PEAs) were synthesized from aliphatic amido diols by melt polycondensation with dimethyl terephthalate and solution polycondensation with terephthaloyl chloride. Intermolecular hydrogen bonds more or less perpendicular to the main‐chain direction induce the formation and stabilization of liquid crystalline property for these PEAs. The structure of these polymers, even in the mesomorphic phase is dominated by hydrogen bonds between the amide–amide and amide–ester groups in adjacent chains. Aliphatic amido diols were synthesized by the aminolysis of γ‐butyrolactone, δ‐valerolactone and ε‐caprolactone with aliphatic diamines containing a number of methylene groups from two to six in isopropanol medium at room temperature. Effects of polarity of the solvent on solution polymerization and effect of catalyst on trans esterification were studied. These polymers were characterized by elemental analysis, FTIR, ¹H NMR, ¹³C NMR, solubility studies, inherent viscosity, DSC, X‐ray diffraction, polarized light microscopy, and TGA. All the melt/solution polycondensed PEAs showed multiple‐phase transitions on heating with second transitions identified as nematic/smectic/spherullitic texture. The mesomorphic properties were studied as a function of their chemical structure by changing alternatively m or n. Odd‐even effect on mesophase transition temperature, isotropization temperature, and crystallinity were studied. The effect of molecular weight and polydispersity on mesophase/isotropization temperature and thermal stability were investigated. It was observed that there exists a competition for crystallinity and liquid crystallinity in these PEAs © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2469–2486, 2000     

Combining ultrasound‐assisted extraction and vortex‐assisted liquid–liquid microextraction for the sensitive assessment of aflatoxins in aquaculture fish species

Although aflatoxins contamination in feedstuff is a well‐known problem, and hence these residues are controlled in poultry products, there is scarce information regarding the presence of these toxic substances in aquaculture fish, facilities that use several feedstuff for fish breeding. A simple, rapid, and sensitive method has been therefore developed for aflatoxins (B1, B2, G1, and G2) assessment in aquaculture products by combining ultrasound probe‐assisted extraction and vortex‐assisted liquid–liquid microextraction as a sample pretreatment, and high‐performance liquid chromatography‐tandem mass spectrometry as a separation/detection system. Aflatoxins were extracted from fish flesh/liver with a 60:40 acetonitrile/aqueous phosphate buffer (pH 7.0) mixture before preconcentration and clean‐up by vortex‐assisted liquid–liquid microextraction under the following optimized conditions: 5.0 mL of fish extract at pH 7.0 and NaCl at 0.5% (w/v), 400 μL of chloroform as extracting solvent, and vortex shaking at 2000 rpm for 1 min. The proposed method is shown to be precise and accurate, and the limit of quantitations (from 0.20 to 1.10 μg kg^?1) were lower than the value established by the European Commission Regulation for aflatoxins in foodstuff. Results have shown that fish flesh is free of aflatoxins, but aflatoxins B2 and G1 were quantified in fish liver.