Immobilization of RAFT agents on silica nanoparticles utilizing an alternative functional group and subsequent surface‐initiated RAFT polymerization

Silica–polystyrene core‐shell particles were successfully prepared by surface‐mediated reversible addition fragmentation chain transfer (RAFT) polymerization of styrene monomer from the surfaces of the silica‐supported RAFT agents. Initially, macro‐RAFT agents were synthesized by RAFT polymerization of γ‐methacryloxypropyltrimethoxysilane (MPS) in the presence of chain transfer agents (CTAs). Immobilization of CTAs onto the silica surfaces was then performed by reacting silica with macro‐RAFT agents via a silane coupling. Grafting of polymer onto silica forms core‐shell nanostructures and shows a sharp contrast between silica core and polymer shell in the phase composition. The thickness of grafted‐polymer shell and the diameter of core‐shell particles increase with the increasing ratio of monomer to silica. A control experiment was carried out by conventional free radical emulsion copolymerization of MPS‐grafted silica and styrene under comparable conditions. The resulting data provide further insight into the chemical composition of grafted‐polymers that are grown from the silica surface through RAFT process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 467–484, 2009     

High-performance fluorescent particles prepared via miniemulsion polymerization

Highly fluorescent polymer particles were prepared with Eu beta-diketonates complex as a fluorophore by miniemulsion polymerization technique. Eu beta-diketonates complex has a long decay time, a large Stokes shift, and very narrow emission bands in comparison with other organic fluorescent compounds. Aqueous miniemulsion was prepared by mixing monomer, crosslinker, hydrophobe, and Eu beta-diketonates complex and then putting the mixture into an aqueous solution of surfactant, followed by ultrasonication. An aqueous solution of initiator was added to the miniemulsion to obtain fluorescent polymer particles, which were monodispersed without aggregation. Particle size was decreased to deca-nano scale by increasing the amount of surfactant. Fluorescent intensity was increased by using Eu beta-complex coordinated with additional ligand. Further fluorescence quantum yields and fluorescent properties in the presence of DNA were investigated to the confirm superiority of Eu beta-diketonates complexes in polymer particles.     

Particle formation under monomer‐starved conditions in the semibatch emulsion polymerization of styrene. I. Experimental

Particle formation and particle growth compete in the course of an emulsion polymerization reaction. Any variation in the rate of particle growth, therefore, will result in an opposite effect on the rate of particle formation. The particle formation in a semibatch emulsion polymerization of styrene under monomer‐starved conditions was studied. The semibatch emulsion polymerization reactions were started by the monomer being fed at a low rate to a reaction vessel containing deionized water, an emulsifier, and an initiator. The number of polymer particles increased with a decreasing monomer feed rate. A much larger number of particles (within 1–2 orders of magnitude) than that generally expected from a conventional batch emulsion polymerization was obtained. The results showed a higher dependence of the number of polymer particles on the emulsifier and initiator concentrations compared with that for a batch emulsion polymerization. The size distribution of the particles was characterized by a positive skewness due to the declining rate of the growth of particles during the nucleation stage. A routine for monomer partitioning among the polymer phase, the aqueous phase, and micelles was developed. The results showed that particle formation most likely occurred under monomer‐starved conditions. A small average radical number was obtained because of the formation of a large number of polymer particles, so the kinetics of the system could be explained by a zero–one system. The particle size distribution of the latexes broadened with time as a result of stochastic broadening associated with zero–one systems. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3940–3952, 2001     

New poly(phenylenevinylene)‐methyl methacrylate‐based photonic crystals

Monodisperse colloids have been prepared efficiently by copolymerization of methyl methacrylate and fluorescent first‐ and second‐generation poly(phenylenevinylene) dendrons under surfactant‐free emulsion polymerization conditions. The copolymers were characterized by UV–vis and fluorescence spectroscopy and size exclusion chromatography. Transmission electron microscopy revealed that the copolymers were microspheres with smooth surfaces and narrow dispersity. The bead diameter could be varied by changing the monomer/water ratio. The materials could be crystallized to give polymer opal photonic crystals. The emission was not affected by the periodic structure because of the large spectral distance between the emission and the pseudogap position. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2659–2665, 2010     

Synthesis of the raspberry‐like PS/PAN particles with anisotropic properties via seeded emulsion polymerization initiated by γ‐ray radiation

We herein report a facile method to prepare the submicron‐sized raspberry‐like polystyrene/polyacrylonitrile particles with anisotropic properties and controllable structure via γ‐radiation‐induced seeded emulsion polymerization under ambient pressure and at room temperature, in which the monodisperse crosslinked styrene‐divinylbenzene‐acrylic acid terpolymer (P(S‐DVB‐AA)) particles were used as seed particles and acrylonitrile (AN) as the second monomer. The influence of the weight ratio of polymer/monomer, the absorbed dose rate, the absorbed dose, and the dispersion medium on the morphology of the as‐prepared particles was investigated. The final products were thoroughly characterized by Fourier transform infrared spectroscopy (FTIR), field‐emission scanning electron microscopy, and transmission electron microscopy. The results showed that the raspberry‐like particles could be fabricated in high yield. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Sterically stabilized emulsion polymerization of styrene: Pseudo‐semicontinuous approach

The sterically stabilized emulsion polymerization of styrene initiated by a water‐soluble initiator at different temperatures has been investigated. The rate of polymerization (R_p) versus conversion curve shows the two non‐stationary‐rate intervals typical for the polymerization proceeding under non‐stationary‐state conditions. The shape of the R_p versus conversion curve results from two opposite effects—the increased number of particles and the decreased monomer concentration at reaction loci as the polymerization advances. At elevated temperatures the monomer emulsion equilibrates to a two‐phase or three‐phase system. The upper phase is transparent (monomer), and the lower one is blue colored, typical for microemulsion. After stirring such a multiphase system and initiation of polymerization, the initial coarse polymer emulsion was formed. The average size of monomer/polymer particles strongly decreased up to about 40% conversion and then leveled off. The initial large particles are assumed to be highly monomer‐swollen particles formed by the heteroagglomeration of unstable polymer particles and monomer droplets. The size of the “highly monomer” swollen particles continuously decreases with conversion, and they merge with the growing particles at about 40–50% conversion. The monomer droplets and/or large highly monomer‐swollen polymer particles also serve as a reservoir of monomer and emulsifier. The continuous release of nonionic (hydrophobic) emulsifier from the monomer phase increases the colloidal stability of primary particles and the number of polymer particles, that is, the particle nucleation is shifted to the higher conversion region. Variations of the square and cube of the mean droplet radius with aging time indicate that neither the coalescence nor the Ostwald ripening is the main driving force for the droplet instability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 804–820, 2003     

Synthesis of carbazole‐based light‐emitting polymers incorporating 2,5‐bis(phenylethenyl)‐4‐decyloxyanisole as collateral fluorophore

The Suzuki coupling polymerization between bis(carbazole) monomer ( CzDB ) and 9,9‐dihexylfluorene‐2,7‐diboronic acid was carried out to obtain PFCz‐PEDA0 having the number‐averaged molecular weight of 7000. The absorption and emission maximum wavelengths were observed at 344 and 408 nm, respectively. The quantum yield (QY) was relatively low (0.12) because of the photo‐induced electron transfer. Subsequently, CzPEDA ‐bearing 2,5‐bis(phenylethenyl)‐4‐decyloxyanisole (PEDA) segment sandwiched with 3‐bromocarbazole units was copolymerized to give PFCz‐PEDAn (n = 05, 10, 20, 35, and 50). The content of PEDA segment in polymer could be controlled by the monomer feed ratio. In CHCl₃ solution, the absorbance at around 400 nm became larger with one isosbestic point at 370 nm, and the emission peak at 448 nm became prominent with increasing the PEDA content. The QY of polymer was increased as the PEDA content, which was a consequence of the fluorescence resonance energy transfer from carbazole‐containing chromophore (energy donor) to PEDA fluorophore (energy acceptor). In spin‐coated film, the maximum QY was obtained in PFCz‐PEDA05 having the most appropriate molar balance of energy donor and acceptor units. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8141–8148, 2008     

Preparation of Fluorescence Tunable Polymer Nanoparticles by One-step Mini-emulsion

Fluorescence tunable polymer nanoparticles were prepared by incorporating two hydrophobic fluorescent dyes (9, 10-diphenylanthracene: DPA and nitrobenzoxadiazolyl: NBD) into polymethylmethacrylate (PMMA) nanoparticles via one-step mini-emulsion polymerization method. The prepared fluorescent nanoparticles exhibit the spectral properties of both DPA and NBD dye, indicating that the two fluorophores have been incorporated into the nanoparticles. The nanoparticles greatly enhance the fluorescence emission of the two hydrophobic dyes in aqueous media probably by providing good protection of the dye molecules in the polymer nanoparticles matrix. Moreover, by varying the doping ratio of the two hydrophobic dyes, the polymer nanoparticles exhibit tunable and distinguishable emission characteristics under a single wavelength excitation via occuring fluorescence resonance energy transfer (FRET).     

Polymerization of styrene with ionic comonomer,nonionic comonomer,or both

Nanosized polystyrene latexes with high polymer contents were obtained from an emulsifier-free process by the polymerization of styrene with ionic comonomer, nonionic comonomer, or both. After seeding particles were generated in an initial emulsion system consisting of styrene, water, an ionic comonomer [sodium styrenesulfonate (NaSS)] or nonionic comonomer [2-hydroxyethyl methacrylate (HEMA)], and potassium persulfate, most of the styrene monomer or a mixture of styrene and HEMA was added dropwise to the polymerizing emulsion over 6 h. Stable latexes with high polystyrene contents (≤25%) were obtained. The latex particle weight-average diameters were largely reduced (41 nm) by the continuous addition of monomer(s) compared with those (117 nm) obtained by the one-pot polymerization method. Latex particles varied from about 30 to 250 nm in diameters, whereas their molar masses were within 10⁴ to 10⁵ g/mol. The effect of the comonomer concentration on the number of polystyrene particles per milliliter of latex and the weight-average molar masses of the copolymers during the polymerization are discussed. The surface compositions of the latex particles were analyzed by X-ray photoelectron spectroscopy, which indicated that the surface of the latex particles was significantly enriched in NaSS, HEMA, or both. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1634–1645, 2001     

Synthesis of fluorescent,dansyl end‐functionalized PMMA and poly(methyl methacrylate‐b‐phenanthren‐1‐yl‐methacrylate) diblock copolymers,at ambient temperature

The polymerization of MMA, at ambient temperature, mediated by dansyl chloride is investigated using controlled radical polymerization methods. The solution ATRP results in reasonably controlled polymerization with PDI < 1.3. The SET‐LRP polymerization is less controlled while SET‐RAFT polymerization is controlled producing poly(methyl methacrylate) (PMMA) with the PDI < 1.3. In all the cases, the polymerization rate followed first order kinetics with respect to monomer conversion and the molecular weight of the polymer increased linearly with conversion. The R group in the CTAs do not appear to play a key role in controlling the propagation rate. SET‐RAFT method appears to be a simpler tool to produce methacrylate polymers, under ambient conditions, in comparison with ATRP and SET‐LRP. Fluorescent diblock copolymers, P(MMA‐b‐PhMA), were synthesized. These were highly fluorescent with two distinguishable emission signatures from the dansyl group and the phenanthren‐1‐yl methacrylate block. The fluorescence emission spectra reveal interesting features such as large red shift when compared to the small molecule. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

PEGDA‐based luminescent polymers prepared by frontal polymerization

Frontal polymerization (FP) of poly(ethylene glycol) diacrylate (PEGDA) was carried out using benzoyl peroxide (BPO) as radical initiator. In addition, a pyrene containing monomer, 1‐pyrenebutyl acrylate (PyBuAc), was incorporated as a fluorescent probe in order to obtain luminescent materials with different chromophore contents. The resulting polymers were characterized by FT‐IR spectroscopy in the solid state and their thermal properties were determined by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Moreover, the optical properties of these materials were studied by absorption and fluorescence spectroscopy. The maximum amount of the incorporated pyrene‐containing monomer into the polymer matrix was limited to 1 wt % by the polymerization process. The obtained labeled polymers poly(PEGDA‐co‐PyBuAc) exhibited a broad absorption band at 345 nm. The fluorescence spectra of these polymers exhibited mainly “monomer emission” so that no excimer emission was observed. It is possible to tune the color of the emitted light by varying the pyrene content in the samples. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2890–2897     

The production of high polymer to surfactant microlatexes

Starved‐feed microemulsion polymerization of styrene was investigated. The influence of the type (SDS or Dowfax 2A1) and concentration of anionic surfactant on the final particle size of latex made by the polymerization of microemulsions of styrene was studied. In addition, the influence of 1‐pentanol and acrylic acid as cosurfactants was examined. Latexes with 20% solids content and polymer to surfactant ratio of 22 were produced, with a particle diameter of 42 nm and very low polydispersity indexes. Smaller particles are produced using SDS than Dowfax 2A1 for the same weight fraction of surfactant; however, similar particle sizes were obtained with the same molar concentrations of SDS and Dowfax 2A1. Further shot additions of monomer increased solids level as high as 40% and polymer to surfactant ratios greater than 40, with particles remaining monodisperse with average diameter smaller than 60 nm. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 48–54, 2010     

基于2，3-萘-18-冠-6单元的共轭高分子对金属离子的荧光传感器

能发射蓝绿色荧光的共轭高分子由单体1,4-二溴-2,3-萘-18-冠-6(M-2)与1,4-二乙烯基-2,5-二丁氧基苯(M-3)通过Pd催化的Heck偶联反应合成制得。通过荧光和紫外-可见光谱探讨了高分子对金属离子的响应性质,其中Hg²⁺能使高分子荧光淬灭、吸收增强,但As^Ⅲ、Pb²⁺和K⁺对高分子的荧光光谱改变很小。结果表明以2,3-萘-18-冠-6作为荧光团和识别位点的共轭高分子可作为有效识别Hg²⁺的荧光化学传感器。     

Structures and photoactive properties of poly(styrene‐co‐vinylbenzophenone)

Poly(styrene‐co‐vinylbenzophenone) prepared by a graft reaction on polystyrene revealed photoactive properties under irradiation of UVA. The photoactive structural features of the polymer were examined via electron paramagnetic resonance (EPR) under irradiation of UVA and fluorescent light. The photoactive functions of the polymer such as antimicrobial performance and dye decolorization ability were investigated. The results revealed that the poly(styrene‐co‐vinylbenzophenone) could generate radicals under fluorescent and UVA irradiation, and some radicals could stay alive for about 30 min in a dark chamber. The photoexcited polymer showed excellent antibacterial ability and decolorization effect on methylene blue and methyl orange dye under both daylight and UVA light. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2423–2430, 2008     

含稀土铕双功能荧光磁性纳米粒子的制备及性能表征

首先制备了油酸和十一烯酸钠改性的水基磁流体,然后在其存在的情况下,将可聚合的稀土铕配合物单体Eu(AA)3Phen(AA=丙烯酸,phen=邻菲罗啉)与苯乙烯和甲基丙烯酸缩水甘油酯在过硫酸钾的引发下,进行无皂种子乳液聚合来制备荧光磁性高分子微球。 利用透射电子显微镜和动态光散射粒度仪表征了粒子的形貌及粒径,发现荧光磁性微球具有明显的核-壳结构及较窄的粒径分布;通过红外光谱和X射线衍射分析表征了粒子的化学及晶体结构;通过振动样品磁强计和荧光分光光度计表征粒子的磁性及荧光性能,发现荧光磁性微球具有超顺磁性,其荧光发射光谱在594和619 nm处出现Eu3+的特征荧光发射峰。     

Nonaqueous dispersion polymerization of styrene in methanol with the ionomer block copolymer poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)]‐b‐polyisobutene as a stabilizer

The nonaqueous dispersion polymerization of styrene in methanol with poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)]‐b‐polyisobutene as a stabilizer was investigated. There was no observable inducing period or autoacceleration in the polymerization process. The conversion increased almost linearly with the polymerization time as high as 80%. The average sizes of the obtained polystyrene particles increased, and the size distributions of the polystyrene particles tended to become narrower, with increasing conversion. The mechanism of the dispersion polymerization in the presence of polyisobutene‐b‐poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)] was nucleation/growth. When the stabilizer/monomer ratio (w/w) was greater than 2.0%, the polystyrene dispersion was stable, and there was no observable polymer particle coagulation taking place during the whole polymerization process. The average diameter of the polymer particles can be mediated through changes in the polymerization conversion, monomer, and stabilizer. Nearly monodispersed polystyrene particles with average diameters of approximately 0.45–2.21 μm were obtained under optimal conditions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2678–2685, 2004     

Nucleation of gold nanoparticles on latex particle surfaces

Gold particles were nucleated on functionalized (i.e., sulfonate or imidazole groups) latex particle surfaces. Gold ions were associated with the functional groups present on the surface of the latex particles by metal‐ligand formation and were then reduced to nucleate gold particles on the particle surface. The use of imidazole groups favored the metal‐ligand formation more effectively compared with sulfonic acid groups, so gold nucleation was investigated on the surface of imidazole‐functionalized model latex particles. The desorption of gold atoms or their surface migration first occurred during the reduction process and then gold nanoparticles were nucleated. The utilization of strong reductants, such as NaBH₄ and dimethylamine borane (DMAB) under mildly acidic conditions (i.e., pH 4) led to the deprotonation of imidazole‐rich polymer chains present on the surface of the model latex particles followed by deswelling of hydrophilic polymer surface layers. As a result, well‐dispersed gold nanoparticles were embedded in the hydrophilic polymer surface. On the other hand, the use of weak reductants led to the formation of localized gold aggregates on the surface of the latex particles. The removal of residual styrene monomer is very important because gold ions can be coordinated with the vinyl groups present in styrene monomer and would then be reduced by nucleophilic water addition. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 912–925, 2008     

The influence of surfactant coverage of the minidroplets on RAFT miniemulsion polymerization

The surfactant coverage of minidroplets was tuned by postaddition of more surfactants after preparation of the miniemulsion of styrene. The influence of surfactant coverage on reversible addition‐fragmentation chain transfer (RAFT) miniemulsion polymerization of styrene was investigated. When the surfactant (sodium dodecyl sulfate; SDS) coverage was as low as 40%, two kinds of particles, denoted as polymer and oligomer particles, were formed in the early stage of the polymerization. Polymer chains within two kinds of particles grew in a parallel way during the rest period of the polymerization. The oligomer particles contributed less than 10% to the final monomer conversion but consumed over one in third the original RAFT agent molecules. Oligomer particles were larger in size but much lower in molecular weight. Both the particle size and molecular weight distributions were bimodal. With increase of SDS coverage, the formation of oligomer particles was suppressed. As a result, the nucleation efficiency of the minidroplets was greatly enhanced and the molecular weight and particle size distributions were dramatically narrowed. The formation of the oligomer particles was ascribed to the superswelling occurring in the beginning stage of the polymerization. The experimental observations are in excellent accord to the superswelling theory. Postaddition of surfactant presents a novel method to narrow particle size and molecular weight distributions in RAFT miniemulsion polymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2293–2306, 2006     

Fluorescence probes based on 9‐acridyl derivatives of aromatic amines for monitoring free‐radical polymerization

The series of 9‐acridyl derivatives of aromatic amines have been investigated as fluorescent probes for monitoring the progress of free‐radical polymerization. This study on the changes in the fluorescence intensity and spectroscopic shift of specific compounds was carried out during thermally initiated polymerization of methyl methacrylate and photoinitiated polymerization of 2‐ethyl‐2‐(hydroxymethyl)‐1,3‐propanediol triacrylate‐1‐methyl‐2‐pyrrolidonone mixture. The purpose of this investigation was to find a relationship between the changes in the shape and intensity of fluorescent probes and the degree of monomer conversion into a polymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3481–3488, 2002     

Photoluminescent energy transfer from poly(phenyleneethynylene)s to near‐infrared emitting fluorophores

Photoluminescent energy transfer was investigated in conjugated polymer‐fluorophore blended thin films. A pentiptycene‐containing poly(phenyleneethynylene) was used as the energy donor, and 13 fluorophores were used as energy acceptors. The efficiency of energy transfer was measured by monitoring both the quenching of the polymer emission and the enhancement of the fluorophore emission. Near‐infrared emitting squaraines and terrylenes were identified as excellent energy acceptors. These results, where a new fluorescent signal occurs in the near‐infrared region on a completely dark background, offer substantial possibilities for designing highly sensitive turn‐on sensors. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3382–3391, 2010