New insights into the Sn underpotential deposition on Au(100)

The underpotential deposition (UPD) of Sn in the system Au(100)/Sn²⁺, SO₄^2? has been studied by classical electrochemical techniques and in situ scanning tunneling microscopy. The results show that the Sn UPD initiates at relatively high potentials with the formation of a quasi‐hexagonal structure characterized as Au(100) ? (√2 × 7)R45°. This expanded overlayer contributes to the modification of the surface morphology which exhibits flat terraces with step edges showing angles of 60 or 120°. At lower potentials two‐dimensional (2D) islands are formed which tend to grow, causing a coverage increase. In the underpotential region close to the formation of the 3D bulk phase the long time polarization experiments indicate the formation of different Au–Sn alloy phases. Copyright © 2011 John Wiley & Sons, Ltd.     

Ordered arrays of semi-crown ligands on an Au(111) electrode surface: in situ STM study

Self-organized systems have attracted much at-tention due to their potential applications in nano- technology as a bottom-up?approach for the con-struction of molecule-scale devices and nanostruc-tures[1—4]. Beyond the self-assembly of small molecu-lar building blocks, Schnherr et al. recently suc-ceeded in arranging the rosette supramolecular nanos-tructures in two dimensions on HOPG[5,6]. Moreover, interest has tremendously increased in the su-pramolecular structures via coordination-dr…     

氧化锌有序结构在Au(111)和Cu(111)上的生长

利用NO₂或O₂作为氧化剂,研究了氧化锌在Au(111)和Cu(111)上的生长和结构。NO₂表现了更好的氧化性能,有利于有序氧化锌纳米结构或薄膜的生长。在Au(111)和Cu(111)这两个表面上,化学计量比氧化锌都形成非极性的平面化ZnO(0001)的表面结构。在Au(111)上,NO₂气氛下室温沉积锌倾向于形成双层氧化锌纳米结构;而在更高的沉积温度下,在NO₂气氛中沉积锌则可同时观测到单层和双层氧化锌纳米结构。O₂作为氧化剂时可导致形成亚化学计量比的ZnO_x结构。由于铜和锌之间的强相互作用会促进锌的体相扩散,并且铜表面可以被氧化形成表面氧化物,整层氧化锌在Cu(111)上的生长相当困难。我们通过使用NO₂作为氧化剂解决了这个问题,生长出了覆盖Cu(111)表面的满层有序氧化锌薄膜。这些有序氧化锌薄膜表面显示出莫尔条纹,表明存在一个ZnO和Cu(111)之间的莫尔超晶格。实验上观察到的超晶格结构与最近理论计算提出的Cu(111)上的氧化锌薄膜结构相符,具有最小应力。我们的研究表明,氧化锌薄膜的表界面结构可能会随氧化程度或氧化剂的不同而变化,而Cu(111)的表面氧化也可能影响氧化锌的生长。当Cu(111)表面被预氧化成铜表面氧化物时,ZnO_x的生长模式会发生变化,锌原子会受到铜氧化物晶格的限域形成单位点锌。我们的研究表明了氧化锌的生长需要抑制锌向金属基底的扩散,并阻止亚化学计量比ZnO_x的形成。因此,使用原子氧源有利于在Au(111)和Cu(111)表面上生长有序氧化锌薄膜。     

Schiff碱N-aete-N在Au(111)上自组装单分子膜的电化学及STM研究

利用电化学技术及扫描隧道显微镜(STM),于0.1mol/LHClO₄溶液中研究了Schiff碱N-aete-N在单晶Au(111)面上所形成的自组装单分子膜(SAMs)的电化学性质及结构.N-aete-N在Au(111)电极表面的吸附抑制了金的阳极氧化,同时使固/液界面双层电容明显降低.观察到N-aete-NSAMs的高分辨STM图像.N-aete-N分子在Au(111)表面上以(6×7)结构单胞呈二维有序排列,其表面浓度为5.5×10^-11mol/cm².     

离子液体中Au(111)和Pt(111)表面Ge欠电位沉积的现场STM研究

本文研究BMIPF₆离子液体中Au(111)和Pt(111)表面Ge的电沉积行为. 循环伏安法测试结果表明,在含0.1 mol·L^-1 GeCl₄的BMIPF₆溶液Au(111)和Pt(111)表面均有两个与Ge沉积过程相关的还原峰. 第一个还原峰包含了Ge⁴⁺还原成Ge²⁺及Ge的欠电位沉积,第二个还原峰对应Ge的本体沉积. 现场扫描隧道显微镜研究结果表明,Ge在Au(111)和Pt(111)表面均有两层欠电位沉积. 第一层欠电位沉积厚度约为0.25 nm、形貌平整、带有缝隙的亚单层结构. 第二层欠电位沉积形貌相对粗糙的点状团簇结构. 该欠电位沉积过程伴随表面合金化.     

Partial stripping of Ag atoms from silver bilayer on a Au(111) surface accompanied with the reductive desorption of hexanethiol SAM

The interfacial structures of Ag bilayer prepared by underpotential deposition on Au(111) (Ag(2ML)/Au(111)) were determined by ex situ scanning tunneling microscopy and in situ surface X-ray scattering measurements before and after oxidative adsorption and after reductive desorption of a self-assembled monolayer (SAM) of hexanethiol (C₆SH) in alkaline ethanol solution. While no structural change was observed after oxidative formation of C₆SH SAM on the Ag(2ML)/Au(111) in an ethanol solution containing 20 mM KOH and 0.1 mM C₆SH, some of the Ag atoms in the bilayer were stripped when the SAM was reductively desorbed. Dedicated to Professor J. O’M. Bockris on the occasion of his 85th birthday.     

Au单晶表面氟表面活性剂FSN自组装膜的电化学行为

研究Au(111)和Au(100)表面非离子型氟表面活性剂FSN自组装膜的电化学行为.电化学扫描隧道显微术和循环伏安法测试表明,在0～0.8 V电位区间,FSN自组装膜未发生氧化还原,均一性好,可稳定地存在于电极表面,并显著抑制硫酸根离子在电极表面的吸附和Au单晶表面的重构.在FSN自组装膜Au单晶电极的初始氧化阶段,Au(111)表面有少量突起,而Au(100)表面呈现台阶剧烈变化,但FSN自组装膜的吸附结构没有改变.与Au(100)表面相比,Au(111)表面形成的FSN自组装膜可更有效地抑制Au表面的氧化.     

碱基腺嘌呤与胸腺嘧啶在Au(111)电极上的共吸附

用循环伏安法(CV)和电化学扫描隧道显微镜(ECSTM)在HClO4溶液中研究了配对碱基腺嘌呤(Adenine,A)与胸腺嘧啶(Thymine,T)在Au(111)电极上的共吸附行为.CV曲线表明,A和T的电化学共吸附行为更接近于A的电化学吸附行为.高分辨STM图像显示,在物理吸附区域碱基A和T分子之间通过氢键作用形成一种不同于单组分的网络结构.根据STM图像提出一个可能的模型,并给出了在Au(111)电极上共吸附时A和T分子之间可能的氢键作用方式.     

Long-Range Chirality Recognition of a Polar Molecule on Au(111)

Chiral molecular self-assemblies were usually achieved using short-range intermolecular interactions, such as hydrogen-, metal–organic, and covalent bonding. However, unavoidable surface defects, such as step edges, surface reconstructions, or site dislocations may limit the applicability of short-range chirality recognition. Long-range chirality recognition on surfaces would be an appealing but challenging strategy for chiral reservation across surface defects at long distances. Now, long-range chirality recognition is presented between neighboring 3-bromo-naphthalen-2-ol (BNOL) stripes on an inert Au(111) surface across the herringbone reconstruction as investigated by STM and DFT calculations. The key to achieving such recognition is the herringbone reconstruction-induced local dipole accumulation at the edges of the BNOL stripes. The neighboring stripes are then forced to adopt the same chirality to create the opposite edged dipoles and neutralize the neighbored dipole moments.     

Electrochemical Studies of the Benzoate Adsorption on Au (111) Electrode

Cyclic voltammetry (CV), differential capacity (DC), and charge densitymeasurements have been employed to study the benzoate (BZ) adsorption at the Au(111)electrode surface. Thermodynamic analysis of charge density (_M) data has beenperformed to describe the properties of the adsorbed benzoate ion. The Gibbsexcess , Gibbs energy of adsorption G, and the number of electrons flowingto the interface per adsorbed benzoate ion at a constant potential (electrosorptionvalency) and at a constant bulk concentration of the benzoate (reciprocal of theEsin—Markov coefficient) have been determined. The results demonstrate thatalthough benzoate adsorption starts at negative charge densities, it takes placepredominantly at a positively charged surface. At the most positive potentials,the surface concentration of benzoate attains a limiting value of about 7.3×10^–10mol-cm^–2, which is independent of the bulk benzoate concentration. This valueis consistent with packing density corresponding to a closed-packed monolayerof vertically adsorbed benzoate molecules. At negative charge densities, benzoateassumes a flat (-bonded) surface coordination. The surface coordination ofbenzoate changes, by moving from a negatively to positively charged surface.At the negatively charged surface, the electrosorption bond is quite polar. Thepolarity of the chemisorption bond is significantly reduced due either to a chargetransfer or a screening of the charge on the anion by the charge on the metal.     

Structure of thiocyanate adlayers on Rh(111): an in situ STM study

In situ scanning tunneling microscopy (STM) was used to examine the structure of thiocyanate adlayers specifically adsorbed on Rh(111) in solutions of potassium hydroxide and perchloric acid, both containing potassium thiocyanate (KSCN). An atomically flat terrace-step structure was consistently observed on Rh(111) surfaces prepared by the flame-annealing-quenching method. The Rh(111)-(1 × 1) atomic structure was discerned on the atomically flat terrace even in the alkaline solution. High-resolution STM images disclosed two different structures of the SCN⁻ adlayers, () and (2 × 2), in the alkaline and the acidic media, respectively. In each structure, an individual adsorbed SCN⁻ ion appeared as a single spot with a constant corrugation height in STM images, suggesting that SCN⁻ ions adsorbed predominantly with their S-ends at particular bonding sites on Rh(111). The difference in the adlayer structure in the two solutions can be attributed to the interaction between adsorbed SCN⁻ and coadsorbed K⁺ in the alkaline solution, and is different from that between adsorbed SCN⁻ and H⁺ in the acidic solution. Received: 26 February 1997 / Accepted: 3 March 1997     

Electrochemical oxidative formation of ordered monolayers of thiol molecules on Au(111) surface

Electrochemical oxidative formation of thiolate monolayers on a Au(111) surface in KOH ethanol solutions of various thiol concentrations is described. The formation process was investigated by electrochemistry, in situ scanning tunneling microscopy (STM), and surface X‐ray diffraction (SXRD). The reductive charge in the linear sweep voltammogram after keeping the potential at +0.1 V increased with holding time and reached the saturated value of 103 µC cm^?2, corresponding to the full monolayer coverage of the ( ) structure. The desorption peak shifted negatively with holding time even after the monolayer was formed, suggesting that ordering of the monolayer requires a much longer time than full coverage adsorption. The herringbone structure, corresponding to the ( × 23) structure, was observed on the Au(111) surface in KOH ethanol solution by in situ STM, which shows that a clean surface was exposed. When hexanethiol ethanol solution was added into the ethanol solution at ?450 mV so that the final thiol concentration was higher than ca. 5 µM, generation of vacancy islands (VIs) was observed, which shows the potentiostatic monolayer formation. When the potential was scanned positively from ?950 mV where a clean reconstructed Au(111) surface was exposed, generation of VIs was observed accompanied by anodic current flow. During both oxidative adsorption and reductive desorption of the monolayer, the shape of the steps of the gold surface changed drastically, which suggests that the gold atoms on the surface are extremely mobile during the monolayer formation. SXRD measurement confirmed the surface reconstruction lifting upon monolayer formation. © 2009 The Japan Chemical Journal Forum and Wiley Periodicals, Inc. Chem Rec 9: 199–209; 2009: Published online in Wiley InterScience ( www.interscience.wiley.com ) DOI 10.1002/tcr.200900002     

噻吩在M(111)(M=Pd,Pt, Au)表面的吸附

采用密度泛函理论(DFT), 选取DMol³程序模块, 对噻吩在M(111) (M=Pd, Pt, Au)表面上的吸附行为进行了探讨. 通过对噻吩在不同底物金属上的吸附能、吸附构型、Mulliken 电荷布居、差分电荷密度以及态密度的分析发现, 噻吩在Pd(111)面上的吸附能最大, Pt(111)面次之, Au(111)面最小. 吸附后, 噻吩在Au(111)面上的构型几乎保持不变, 最终通过S端倾斜吸附于top 位; 噻吩在Pd(111)及Pt(111)面上发生了折叠与变形, 环中氢原子向上翘起, 最终通过环平面平行吸附于hollow 位. 此外, 噻吩环吸附后芳香性遭到了破坏, 环中碳原子发生sp³杂化, 同时电子逐渐由噻吩向M(111)面发生转移, M(111)面上的部分电子也反馈给了噻吩环中的空轨道, 这种协同作用最终导致了噻吩分子稳定吸附于M(111)面.     

噻吩在M(111)(M=Pd,Pt,Au)表面的吸附(英文)

采用密度泛函理论(DFT),选取DMol3程序模块,对噻吩在M(111)(M=Pd,Pt,Au)表面上的吸附行为进行了探讨.通过对噻吩在不同底物金属上的吸附能、吸附构型、Mulliken电荷布居、差分电荷密度以及态密度的分析发现,噻吩在Pd(111)面上的吸附能最大,Pt(111)面次之,Au(111)面最小.吸附后,噻吩在Au(111)面上的构型几乎保持不变,最终通过S端倾斜吸附于top位;噻吩在Pd(111)及Pt(111)面上发生了折叠与变形,环中氢原子向上翘起,最终通过环平面平行吸附于hollow位.此外,噻吩环吸附后芳香性遭到了破坏,环中碳原子发生sp3杂化,同时电子逐渐由噻吩向M(111)面发生转移,M(111)面上的部分电子也反馈给了噻吩环中的空轨道,这种协同作用最终导致了噻吩分子稳定吸附于M(111)面.     

Ordered arrays of semi-crown ligands on an Au(111) electrode surface: <Emphasis Type="Italic">in situ</Emphasis> STM study

In situ scanning tunneling microscopy (STM) and cyclic voltammetry were employed to investigate the adsorption structures of three semi-crown ligands on an Au(111) surface under the potential control. It is found that all the molecules formed ordered arrays in 0.1 mol/L HClO₄ solution, although their geometric structures are complex and asymmetric. The driving force was supposed to come from the balance between intermolecular and molecule-substrate interactions. High resolution STM images revealed internal molecular structures, orientations and packing arrangements in the ordered adlayers. The results are useful for preparing ordered arrays of transition metal-mediated nanostructures.     

The structure, growth and reactivity of electrodeposited Ru/Au(111) surfaces

In order to elucidate electronic effects on the oxidation of CO on small Ru clusters, we investigated this reaction on well defined Ru/Au(111) model systems via parallel in-situ STM studies of the structure and electrochemical deposition of Ru on Au(111) in H₂SO₄ solution and cyclic voltammetry of CO monolayer oxidation on these surfaces. The Ru deposit consists of nanoscale islands, which coalesce with increasing coverage. The Ru saturation coverage depends on the deposition potential, resulting in Ru submonolayer (>0.1 V), (defective) monolayer (≥−0.1 V), and multilayer films (<−0.1 V). At potentials >0.6 V irreversible formation of Ru oxide/hydroxide species is observed, which can be partly reduced in the range 0.4 to 0.0 V. CO stripping commences at ≈0.1 V and occurs over a broad potential range. From the stripping charge a local CO coverage on the Ru monolayer islands of 0.7 ML was estimated. The observed influence of the morphology of the Ru deposit on the CO stripping voltammetry is explained by (local) variations in the CO adsorption energy due to electronic modifications of the Ru film.     

Au(111)面甲烷硫醇吸附的密度泛函理论研究

采用基于密度泛函理论的第一性原理方法和平板模型研究了CH₃SH分子在Au(111)表面的吸附构型和电子结构. 系统地计算了S原子在不同位置以不同方式吸附的系列构型, 计算结果表明, CH₃SH分子倾向于吸附在top位上, S-C键相对于Au表面法线的夹角为62°～78°|而S-H键断裂后CH₃S_H则倾向于吸附在bri-fcc位上, S-C键相对于Au(111)表面法线的夹角为49°～57°. 比较分析CH₃SH分子和CH₃S_H的吸附, 发现CH₃SH分子倾向于不解离吸附, 表面温度的提升和缺陷的出现可能促使S-H键的断裂. 通过比较S原子在独立的CH₃SH分子和吸附状态下的局域态密度, 发现S-H键断裂后S原子和表面的键合强于S-H键未断裂时S原子和表面的键合. 扫描隧道显微镜(STM)图像模拟显示了CH₃SH和CH₃S_H在Au(111)表面吸附的3个典型的STM图像.     

Adsorption of multivalent alkylthiols on Au(111) surface: Insights from DFT

The adsorption of multivalent thiols on gold (111) surface was investigated using density functional theory applying the Perdew–Burke–Ernzerhof functional. Through the comparison of differences in energetics, structure and charge density distribution of a set of monodentate and polydentate thiols, we have described in detail the factors affecting the adsorption energy and the role played by the multivalence, which causes a decreasing of adsorption energy because of both electronic and steric hindrance effects. Finally, the comparison between the adsorption of 1,2‐ and 1,3‐disulfides revealed how the chain length may affect the cleavage of the S? S bond when they adsorb on Au(111) surface. © 2013 Wiley Periodicals, Inc.     

A Periodic Density Functional Study on Adsorption Properties of Methoxy on Au（111） Surface

1INTRODUCTION Methoxy(CH3O)has been identified as the first intermediate in the decomposition of methanol on extensive list of clean transition metal surfaces,such as Ni(100)[1],Cu(100)[2,3],Cu(111)[4],Ag(111)[5],Au(110)[6],Pd(111)[7]and Ru(0001)[8].The electronic structure of the metal is a determining factor in OH bond scission.In fact,group IB clean surfaces have shown very low activity towards this reaction,al-though there are reports on low amounts of methoxy formed on clean Cu(…     

Au(111)电极上CTAB吸脱附过程的循环伏安研究

本文运用循环伏安方法研究十六烷基三甲基溴化铵(CTAB)在Au(111)电极上的吸附行为. 首次给出CTAB在Au(111)电极上的循环伏安曲线,其0.18 V、0.27 V有两对可逆的特征电流尖峰,均受扩散控制,且与卤素离子种类有关. 研究表明,烷基铵阳离子的吸脱附及吸附层相转变与Au(111)电极表面结构密切相关.