N‐(2‐benzimidazolylquinolin‐8‐yl)benzamidate half‐titanocene chlorides: Synthesis,characterization and their catalytic behavior toward ethylene polymerization

A series of N‐(2‐benzimidazolyquinolin‐8‐yl)benzamidate half‐titanocene chlorides, Cp′TiLCl ( C1 – C8 : Cp′ = C₅H₅, MeC₅H₄, or C₅Me₅; L = N‐(benzimidazolyquinolin‐8‐yl)benzamides)), was synthesized by the KCl elimination reaction of half‐titanocene trichlorides with the correspondent potassium N‐(2‐benzimidazolyquinolin‐8‐yl)benzamide. These half‐titanocene complexes were fully characterized by elemental and NMR analyses, and the molecular structures of complexes C2 and C8 were determined by the single‐crystal X‐ray diffraction. The high stability of the pentamethylcyclopentadienyl complex ( C8 ) was evident by no decomposing nature of its solution in air for one week. The oxo‐bridged dimeric complex ( C9 ) was isolated from the solution of the corresponding cyclopentadienyl complex ( C3 ) solution in air. Complexes C1 – C8 exhibited good to high catalytic activities toward ethylene polymerization and ethylene/α‐olefin copolymerization in the presence of methylaluminoxane (MAO) cocatalyst. In the typical catalytic system of C1/ MAO, the polymerization productivities were enhanced with either elevating reaction temperature or increasing the ratio of MAO to titanium precursor. In general, it was observed that higher the catalytic activity of the catalytic system lower the molecular weight of polyethylene. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3154–3169, 2009     

Imino‐indolate half‐titanocene chlorides: Synthesis and their ethylene (co‐)polymerization

A series of imino‐indolate half‐titanocene chlorides, Cp′Ti(L)Cl₂ ( C1 – C7 : Cp′ = C₅H₅, MeC₅H₄, C₅Me₅, L = imino‐indolate ligand), were synthesized by the reaction of Cp′TiCl₃ with sodium imino‐indolates. All complexes were characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy. Moreover, the molecular structures of two representative complexes C4 and C6 were confirmed by single crystal X‐ray diffraction analysis. On activation with methylaluminoxane (MAO), these complexes showed good catalytic activities for ethylene polymerization (up to 7.68 × 10⁶ g/mol(Ti)·h) and ethylene/1‐hexene copolymerization (up to 8.32 × 10⁶ g/mol(Ti)·h), producing polyolefins with high molecular weights (for polyethylene up to 1808 kg/mol, and for poly(ethylen‐co‐1‐hexene) up to 3290 kg/mol). Half‐titanocenes containing ligands with alkyl substituents showed higher catalytic activities, whereas the half‐titanocenes bearing methyl substituents on the cyclopentadienyl groups showed lower productivities, but produced polymers with higher molecular weights. Moreover, the copolymerization of ethylene and methyl 10‐undecenoate was demonstrated using the C1 /MAO catalytic system. The functionalized polyolefins obtained contained about 1 mol % of methyl 10‐undecenoate units and were fully characterized by several techniques such as FT‐IR, ¹H NMR, ¹³C NMR, DSC, TGA and GPC analyses. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 357–372, 2009     

Synthesis and characterization of ethylene‐propylene‐1‐pentene terpolymers

Ethylene (E), propylene (P), and 1‐pentene (A) terpolymers differing in monomer composition ratio were produced, using the metallocenes rac‐ethylene bis(indenyl) zirconium dichloride/methylaluminoxane (rac‐Et(Ind)₂ZrCl₂/MAO), isopropyl bis(cyclopentadienyl)fluorenyl zirconium dichloride/methylaluminoxane (Me₂C(Cp)(Flu)ZrCl₂/MAO, and bis(cyclopentadienyl)zirconium dichloride, supported on silica impregnated with MAO (Cp₂ZrCl₂/MAO/SiO₂/MAO) as catalytic systems. The catalytic activities at 25 °C and normal pressure were compared. The best result was obtained with the first catalyst. A detailed study of ¹³C NMR chemical shifts, triad sequences distributions, monomer‐average sequence lengths, and reactivity ratios for the terpolymers is presented. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 947–957, 2008     

Bis(2‐(6‐methylpyridin‐2‐yl)‐benzimidazolyl)titanium dichloride and titanium bis(6‐benzimidazolylpyridine‐2‐carboxylimidate): Synthesis,characterization, and their catalytic behaviors for ethylene polymerization

A series of 6‐(benzimidazol‐2‐yl)‐N‐organylpyridine‐2‐carboxamide were synthesized and transformed into 6‐benzimidazolylpyridine‐2‐carboxylimidate as dianionic tridentate ligands. Bis(2‐(6‐methylpyridin‐2‐yl)‐benzimidazolyl)titanium dichloride ( C1 ) and titanium bis(6‐benzimidazolylpyridine‐2‐carboxylimidate) ( C2 – C8 ) were synthesized in acceptable yields. These complexes were systematically characterized by elemental and NMR analyses. Crystallographic analysis revealed the distorted octahedral geometry around titanium in both complexes C1 and C4 . Using MAO as cocatalyst, all complexes exhibited from good to high catalytic activities for ethylene polymerization. The neutral bis(6‐benzimidazolylpyridine‐2‐carboxylimidate)titanium ( C2 – C8 ) showed high catalytic activities and good stability for prolonged reaction time and elevated reaction temperature; however, C1 showed a short lifetime in catalysis as being observed at very low activity after 5 min. The elevated reaction temperature enhanced the productivity of polyethylenes with low molecular weights, whereas the reaction with higher ethylene pressure resulted in better catalytic activity and resultant polyethylenes with higher molecular weights. At higher ratio of MAO to titanium precursor, the catalytic system generated better activity with producing polyethylenes with lower molecular weights. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3411–3423, 2008     

High molecular weight atactic polypropene synthesized with (η5‐pentamethylcyclopentadienyl)tribenzyl titanium activated with MAO

The half‐titanocene (η⁵‐pentamethylcyclopentadienyl)tribenzyl titanium (Cp*TiBz₃) with methylaluminoxane (MAO) as the cocatalyst was employed to catalyze propene polymerization at ambient pressure. A novel atactic polypropene elastomer with a high molecular weight (M̄_w = 2 − 8 × 10⁵) was produced. The effects of the polymerization conditions on the catalytic activity and polymer molecular weight are discussed. ¹³C NMR analysis confirmed that the catalyst system Cp*TiBz₃/MAO produced atactic polypropenes, and the polymerization mechanism was in agreement with the Bernoullian process. The triad sequence distribution of the polymer was measured and found to be as follows: mm = 6.15%, mr = 40.87%, and rr = 52.98% (Bernoullian factor B = 1.03); this indicated that the insertion of propene with the catalyst system followed a chain‐end control model. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 411–415, 2000     

Copolymerization behavior of titanium imidazolin‐2‐iminato complexes

Monocyclopentadienyl titanium imidazolin‐2‐iminato complexes [Cp′Ti(L)X₂] 1a (Cp′ = cyclopentadienyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide, X = Cl), 1b (X = CH₃); 2 (Cp′ = cyclopentadienyl, L = 1,3‐diisopropylimidazolin‐2‐imide, X = Cl); 3 (Cp′ = tert‐butylcyclopentadienyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide, X = Cl), upon activation with methylaluminoxane (MAO) were active for the polymerization of ethylene and propylene and the copolymerization of ethylene and 1‐hexene. Catalysts derived from imidazolin‐2‐iminato tropidinyl titanium complex 4 = [(Trop)Ti(L)Cl₂] (Trop = tropidinyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide) were much less active. Narrow polydispersities were observed for ethylene and propylene polymerization, but the copolymerization of ethylene/hexene led to bimodal molecular weight distributions. The productivity of catalysts derived from the dialkyl complex 1b activated with [Ph₃C][B(C₆F₅)₄] or B(C₆F₅)₃ were less active for ethylene/hexene copolymerization but yielded ethylene/hexene copolymers of narrower molecular weight distributions than those derived from 1a/MAO. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6064–6070, 2008     

Polymerization of isoprene with η5‐C5H4(tert‐Bu)TiCl3/MAO catalyst

cis‐Selective polymerizations of isoprene with the catalysts composed of η⁵‐C₅H₄(R)TiCl₃ (1; R?H, 2 ; tert‐Bu) and methylaluminoxane were investigated. Both catalysts showed remarkable catalytic activities for the polymerization of isoprene. The polymerization activities were strongly affected by the substituent introduced on cyclopentadienyl ring. Introduction of bulky tert‐butyl group was found to be effective for enhancement of polymerization activity, but the cis‐content of polyisoprene prepared by the 2 /MAO catalyst was lower than that by 1 /MAO catalyst. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1841–1844, 2004     

Activity and stability spontaneously enhanced toward ethylene polymerization by employing 2‐(1‐(2,4‐dibenzhydrylnaphthylimino)ethyl)‐6‐(1‐(arylimino)ethyl) pyridyliron(II) dichlorides

A series of 2‐(1‐(2,4‐dibenzhydrylnaphthylimino)ethyl)‐6‐(1‐(arylimino)ethyl)pyridyliron(II) complexes ( Fe1 ? Fe5 ) was synthesized and characterized. The molecular structure of the representative Fe2 was determined by single‐crystal X‐ray diffraction, revealing a distorted pseudo‐square‐pyramidal geometry around the iron center. On activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), all these iron complex precatalysts performed with high activities (up to 1.58 × 10⁷ g (PE) mol^?1 (Fe) h^?1) toward ethylene polymerization, producing highly linear polyethylenes with high molecular weight and bimodal distribution, which was in accordance with high temperature ¹³C NMR, high T _m values (T _m ～130 °C) and the GPC curves of the obtained polyethylenes. Meanwhile, DFT calculation results also showed the good correlation between net charges on iron and experimental activities. Compared with previous bis(imino)pyridyliron analogues, the current iron complexes containing the benzhydrylnaphthyl groups exhibited relatively higher activities and better thermal‐stability at elevated temperatures, especially at 80 °C as the industrial operating temperature, and still showed high activities toward ethylene polymerization up to 8.57 × 10⁶ g (PE) mol^?1 (Fe) h^?1 in the presence of co‐catalyst MMAO. In addition, these iron complex precatalysts all exhibited long lifetimes. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 988–996     

Polymerization of vinyl chloride with half‐titanocene/methylaluminoxane catalysts

The polymerization of vinyl chloride (VC) with half‐titanocene /methylaluminoxane (MAO) catalysts is investigated. The polymerization of VC with the Cp*Ti(OCH₃)₃/MAO catalyst (Cp* = η⁵‐pentamethylcyclopentadienyl) afforded high‐molecular‐weight poly(vinyl chloride) (PVC) in good yields, although the polymerization proceeded at a slow rate. With the Cp*TiCl₃/MAO catalyst, the polymer was also obtained, but the polymer yield was lower than that with the Cp*Ti(OCH₃)₃/MAO catalyst. The polymerization of VC with the Cp*Ti(OCH₃)₃/MAO catalyst was influenced by the MAO/Ti mole ratio and reaction temperature, and the optimum was observed at the MAO/Ti mole ratio of about 10. The optimum reaction temperature of VC with the Cp*Ti(OCH₃)₃/MAO catalyst was around 20 °C. The stereoregularity of PVC obtained with the Cp*Ti(OCH₃)₃/MAO catalyst was different from that obtained with azobisisobutyronitrile, but highly stereoregular PVC could not be synthesized. From the elemental analyses, the ¹H and ¹³C NMR spectra of the polymers, and the analysis of the reduction product from PVC to polyethylene, the polymer obtained with Cp*Ti(OCH₃)₃/MAO catalyst consisted of only regular head‐to‐tail units without any anomalous structure, whereas the Cp*TiCl₃/MAO catalyst gave the PVC‐bearing anomalous units. The polymerization of VC with the Cp*Ti(OCH₃)₃/MAO catalyst did not inhibit even in the presence of radical inhibitors such as 2,2,6,6,‐tetrametylpiperidine‐1‐oxyl, indicating that the polymerization of VC did not proceed via a radical mechanism. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 248–256, 2003     

Manganese‐based transition metal complexes as new catalysts for olefin polymerizations

Three manganese complexes, Mn(acac)₃ (acac = acetylacetonate), Cp₂Mn (Cp = cyclopentadienyl), and Mn(salen)Cl [salen = 1,2‐cyclohexanediamino‐N,N′‐bis(3,5‐dit‐butyl‐salicylidene)], were used for ethylene and propylene polymerizations. These complexes, in combination with an alkylaluminum cocatalyst such as methylaluminoxane (MAO) or diethyl aluminum chloride (AlEt₂Cl), could promote ethylene polymerizations that yielded extremely high molecular weight linear polymers, but were inactive for propylene polymerizations. The counterparts supported on MgCl₂ showed activities even for propylene polymerizations and had remarkably enhanced activities for ethylene polymerizations. In the presence of an electron donor such as ethylbenzoate, the MgCl₂‐supported manganese‐based catalysts yielded a highly isotactic polypropylene with a high molecular weight. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3733–3738, 2001     

Highly active ethylene polymerization and copolymerization with norbornene using bis(imino‐indolide) titanium dichloride–MAO system

A catalytic system of new titanium complexes with methylaluminoxane (MAO) was found to effectively polymerize ethylene for high molecular weight polyethylene as well as highly active copolymerization of ethylene and norbornene. The bis (imino‐indolide)titanium dichlorides (L₂TiCl₂, 1 – 5 ), were prepared by the reaction of N‐((3‐chloro‐1H‐indol‐2‐yl)methylene)benzenamines with TiCl₄, and characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy. The solid‐state structures of 1 and 4 were determined by X‐ray diffraction analysis to reveal the six‐coordinated distorted octahedral geometry around the titanium atom with a pair of chlorides and ligands in cis‐forms. Upon activation by MAO, the complexes showed high activity for homopolymerization of ethylene and copolymerization of ethylene and norbornene. A positive “comonomer effect” was observed for copolymerization of ethylene and norbornene. Both experimental observations and paired interaction orbital (PIO) calculations indicated that the titanium complexes with electron‐withdrawing groups in ligands performed higher catalytic activities than those possessing electron‐donating groups. Relying on different complexes and reaction conditions, the resultant polyethylenes had the molecular weights M_w in the range of 200–2800 kg/mol. The influences on both catalytic activity and polyethylene molecular weights have been carefully checked with the nature of complexes and reaction conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3415–3430, 2007     

Olefin polymerization with Me4Cp–Amido complexes with electron‐withdrawing groups

A series of Me₄Cp–amido complexes {[η⁵:η¹‐(Me₄C₅)SiMe₂NR]TiCl₂; R = t‐Bu, 1 ; C₆H₅, 2 ; C₆F₅, 3 ; SO₂Ph, 4 ; or SO₂Me, 5 } were prepared and investigated for olefin polymerization in the presence of methylaluminoxane (MAO). X‐ray crystallography of complexes 3 and 4 revealed very long Ti N bonds relative to the bonds of 1 . These complexes were employed for ethylene–styrene copolymerizations, styrene homopolymerizations, and propylene homopolymerizations in the presence of MAO. The productivities of the catalysts derived from 3 – 5 were much lower than the productivity of the catalyst derived from 1 for the propylene polymerizations and ethylene–styrene copolymerizations, whereas the styrene polymerization activities were much higher for the catalysts derived from 3 – 5 than for the catalyst derived from 1 . The polymerization behavior of the catalysts derived from the metallocenes 3 – 5 were more reminiscent of monocyclopentadienyl titanocene Cp′TiX₃/MAO catalysts than of CpATiX₂/MAO catalysts such as 1 containing alkylamido ligands. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4649–4660, 2000     

Efficient ethylene/norbornene copolymerization by half‐titanocenes containing imidazolin‐2‐iminato ligands and MAO catalyst systems

Ethylene copolymerizations with norbornene (NBE) using half‐titanocenes containing imidazolin‐2‐iminato ligands, Cp′TiCl₂[1,3‐R₂(CHN)₂C?N] [Cp′ = Cp ( 1 ), ^tBuC₅H₄ ( 2 ); R = ^tBu ( a ), 2,6‐ⁱPr₂C₆H₃ ( b )], have been explored in the presence of methylaluminoxane (MAO) cocatalyst. Complex 1a exhibited remarkable catalytic activity with better NBE incorporation, affording high‐molecular‐weight copolymers with uniform molecular weight distributions, whereas the tert‐BuC₅H₄ analog ( 2a ) showed low activity, and the resultant polymer prepared by the Cp‐2,6‐diisopropylphenyl analog ( 1b ) possessed broad molecular weight distribution. The microstructure analysis of the poly(ethylene‐co‐NBE)s prepared by 1a suggests the formation of random copolymers including two and three NBE repeating units. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2575–2580     

Olefin polymerization and copolymerization with soluble transition‐metal complex catalysts

Olefin polymerizations catalyzed by Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) ( 1 – 5 ; Cp′ = cyclopentadienyl group), RuCl₂(ethylene)(pybox) { 7 ; pybox = 2,6‐bis[(4S)‐4‐isopropyl‐2‐oxazolin‐2‐yl]pyridine}, and FeCl₂(pybox) ( 8 ) were investigated in the presence of a cocatalyst. The Cp*TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) ( 5 )–methylaluminoxane (MAO) catalyst exhibited remarkable catalytic activity for both ethylene and 1‐hexene polymerizations, and the effect of the substituents on the cyclopentadienyl group was an important factor for the catalytic activity. A high level of 1‐hexene incorporation and a lower r_E · r_H value with 5 than with [Me₂Si(C₅Me₄)(N^tBu)]TiCl₂ ( 6 ) were obtained, despite the rather wide bond angle of Cp Ti O (120.5°) of 5 compared with the bond angle of Cp Ti N of 6 (107.6°). The 7 –MAO catalyst exhibited moderate catalytic activity for ethylene homopolymerization and ethylene/1‐hexene copolymerization, and the resultant copolymer incorporated 1‐hexene. The 8 –MAO catalyst also exhibited activity for ethylene polymerization, and an attempted ethylene/1‐hexene copolymerization gave linear polyethylene. The efficient polymerization of a norbornene macromonomer bearing a ring‐opened poly(norbornene) substituent was accomplished by ringopening metathesis polymerization with the well‐defined Mo(CHCMe₂Ph)(N‐2,6‐ⁱPr₂C₆H₃)[OCMe(CF₃)₂]₂ ( 10 ). The key step for the macromonomer synthesis was the exclusive end‐capping of the ring‐opened poly(norbornene) with p‐Me₃SiOC₆H₄CHO, and the use of 10 was effective for this polymerization proceeding with complete conversion. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4613–4626, 2000     

α‐olefin homopolymerization and ethylene/1‐hexene copolymerization catalysed by novel ansa‐group IV complexes/MAO system

The catalytic properties of a set of ansa‐complexes (R‐Ph)₂C(Cp)(Ind)MCl₂ [R = ^tBu, M = Ti ( 3 ), Zr ( 4 ) or Hf ( 5 ); R = MeO, M = Zr ( 6 ), Hf ( 7 )] in α‐olefin homopolymerization and ethylene/1‐hexene copolymerization were explored in the presence of MAO (methylaluminoxane). Complex 4 with steric bulk ^tBu group on phenyl exhibited remarkable catalytic activity for ethylene polymerization. It was 1.6‐fold more active than complex 11 [Ph₂C(Cp)(Ind)ZrCl₂] at 11 atm ethylene pressure and was 4.8‐fold more active at 1 atm pressure. The introduction of bulk substituent ^tBu into phenyl groups not only increased the catalytic activity greatly but also enhanced the content of 1‐hexene in ethylene/1‐hexene copolymerization. The highest 1‐hexene incorporation was 25.4%. In addition, 4 was also active for propylene and 1‐hexene homopolymerization, respectively, and low isotactic polypropylene (mmmm = 11.3%) and isotactic polyhexene (mmmm = 31.6%) were obtained. Copyright © 2007 John Wiley & Sons, Ltd.     

The influence of phenylsilane on the syndiotactic polymerization of styrene with η5‐pentamethylcyclopentadienyl titanium trifluoride

The syndiotactic polystyrene polymerization activity of a fluorinated half‐sandwich complex, η⁵‐pentamethylcyclopentadienyl titanium trifluoride (Cp*TiF₃), in the presence of relatively low amounts of methylalumoxane (MAO; MAO/Cp*TiF₃ molar ratio = 200/1) and triisobutylaluminum, is significantly increased by the addition of phenylsilane in molar ratios to Cp*TiF₃ ranging from about 300/1 to 600/1, if the phenylsilane is added to the monomer. Lower amounts of phenylsilane, such as a 100/1 molar ratio to Cp*TiF₃, lead to a reduced polymerization activity in comparison with styrene without phenylsilane. A prereaction of phenylsilane with the catalyst mixture shows a behavior that is strongly dependent on the storage time of the composition and the temperature. A storage time of about 16 h is sufficient to reduce the polymerization conversion to about half of the original value. The results are discussed on the basis of a chain‐transfer reaction with phenylsilane and several catalyst complexes of different stabilities and activities, including an alkylation product of phenylsilane. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3476–3485, 2000     

Highly active copolymerization of ethylene with 10‐undecen‐1‐ol using phenoxy‐based zirconium/methylaluminoxane catalysts

Activated with methylaluminoxane (MAO), phenoxy‐based zirconium complexes bis[(3‐^tBu‐C₆H₃‐2‐O)‐CH?NC₆H₅]ZrCl₂, bis[(3,5‐di‐^tBu‐C₆H₂‐2‐O)‐PhC?NC₆H₅] ZrCl₂, and bis[(3,5‐di‐^tBu‐C₆H₂‐2‐O)‐PhC?N(2‐F‐C₆H₄)]ZrCl₂ for the first time have been used for the copolymerization of ethylene with 10‐undecen‐1‐ol. In comparison with the conventional metallocene, the phenoxy‐based zirconium complexes exhibit much higher catalytic activities [>10⁷ g of polymer (mol of catalyst)^?1 h^?1]. The incorporation of 10‐undecen‐1‐ol into the copolymers and the properties of the copolymers are strongly affected by the catalyst structure. Among the three catalysts, complex c is the most favorable for preparing higher molecular weight functionalized polyethylene containing a higher content of hydroxyl groups. Studies on the polymerization conditions indicate that the incorporated commoner content in the copolymers mainly depends on the comonomer concentration in the feed. The catalytic activity is slightly affected by the Al_(MAO)/Zr molar ratio but decreases greatly with an increase in the polymerization temperature. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5944–5952, 2005     

Syntheses of Some New Group 4 non-Cp Complexes Bearing Schiff-base, Thiophene Diamide Ligands Respectively and Their Catalytic Activities for a-Olefin Polymerization

Totally sixteen new titanium and zirconium non-Cp complexes supported by Schiff-base, or thiophene diamide ligands have been synthesized. The complexes are obtained by the reaction of M(OPr-i)4(M=Ti,Zr) with the corresponding Schiff-base ligand in 1:1 molar ratio in good yield. The thiophene diamide titanium complex has been prepared from trimethylsilyl amine [N,S,N] ligand and TiCl4 in toluene at 120℃. All complexes are well charac-terized by ^1H NMR, IR, MS and elemental analysis. When activated by excess methylaluminoxane (MAO), complexes show moderate catalytic activity for ethylene polymerization, and complex If (R^1=CH3,R^2=Br) exhibits the highest activity for ethylene and styrene polymerization. When the complexes were preactivated by triethylaluminum (TEA), both polymerization activities and syndiotacticity of the polymers were greatly improved.     

Homo‐ and copolymerization of ethylene and norbornene with bis(β‐diketiminato) titanium complexes activated with methylaluminoxane

Homo‐ and copolymerization of ethylene and norbornene were investigated with bis(β‐diketiminato) titanium complexes [ArNC(CR₃)CHC(CR₃)NAr]₂TiCl₂ (R = F, Ar = 2,6‐diisopropylphenyl 2a; R = F, Ar = 2,6‐dimethylphenyl 2b ; R = H, Ar = 2,6‐diisopropylphenyl 2c ; R = H, Ar = 2,6‐dimethylphenyl 2d) in the presence of methylaluminoxane (MAO). The influence of steric and electric effects of complexes on catalytic activity was evaluated. With MAO as cocatalyst, complexes 2a–d are moderately active catalysts for ethylene polymerization producing high‐molecular weight polyethylenes bearing linear structures, but low active catalysts for norbornene polymerization. Moreover, 2a – d are also active ethylene–norbornene (E–N) copolymerization catalysts. The incorporation of norbornene in the E–N copolymer could be controlled by varying the charged norbornene. ¹³C NMR analyses showed the microstructures of the E–N copolymers were predominantly alternated and isolated norbornene units in copolymer, dyad, and triad sequences of norbornene were detected in the E–N copolymers with high incorporated content of norbornene. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 93–101, 2008     

Dichlorovanadium (IV) complexes with salen‐type ligands for ethylene polymerization

Vanadium complexes with tetradentate salen‐type ligands were first time explored in ethylene polymerizations. The effects of the vanadium complex structure, the alkyl aluminum cocatalysts type (EtAlCl₂, Et₂AlCl, Et₃Al, and MAO), and the polymerization conditions (Al/V molar ratio, temperature) on polyethylene yield were explored. It was found that EtAlCl₂ in conjunction with investigated vanadium complexes produced the most efficient catalytic systems. It was shown, moreover, that the structural changes of the tetradentate salen ligand (type of bridge which bond donor nitrogen atoms and type of substituent on aryl rings) affected activity of the catalytic system. The complexes containing ligands with cyclohexylene bridges were more active than those with ethylene bridges. Furthermore, the presence of electron‐withdrawing groups at the para position and electron‐donating substituents at the ortho position on the aryl rings of the ligands resulted in improved activity in relation to the systems with no substituents (with the exception of bulky t‐Bu group). The results presented also revealed that all vanadium complexes activated by common organoaluminum compounds gave linear polyethylenes with high melting points (134.8–137.6 °C), high molecular weights, and broad molecular weight distribution. The polymer produced in the presence of MAO possesses clearly lower melting point (131.4 °C) and some side groups (around 9/1000 C). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6940–6949, 2008