The chemistry and thermal stability of HfTaO/Si interface by x‐ray photoelectron spectroscopy

The chemistry and thermal stability of HfTaO/Si interface as a function of annealing temperature have been investigated by x‐ray photoelectron spectroscopy. For the as‐deposited sample, the formation of Hf‐silicate bond is observed on Hf 4f core‐level spectra, which contributes to bulk HfO₂ and SiO₂. Besides, the suboxide of tantalum (Ta⁺¹) is formed at the interface at room temperature because of oxygen‐deficient conditions. HfSi₂, Hf_xSi_yO_4, and HfO₂ coexists in interfacial region at 850 °C, meanwhile, an evidence for transforming from the Ta¹⁺ to tantalum oxide (Ta⁵⁺) is verified. The peaks of Hf–O–Si and Hf–O have disappeared, only one peak of Hf silicide remained after the annealing at 950 °C. A stable SiO₂ phase in HfTaO/Si is formed under different annealing conditions. Copyright © 2011 John Wiley & Sons, Ltd.     

Pyrochlore and Perovskite Potassium Tantalate: Enthalpies of Formation and Phase Transformation

Alkali niobates and tantalates are currently important lead‐free functional oxides. The formation and decomposition energetics of potassium tantalum oxide compounds (K₂O?Ta₂O₅) were measured by high‐temperature oxide melt solution calorimetry. The enthalpies of formation from oxides of KTaO₃ perovskite and defect pyrochlores with K/Ta ratio of less than 1 stoichiometry—K_0.873Ta_2.226O₆, K_1.128Ta_2.175O₆, and K_1.291Ta_2.142O₆—were experimentally determined, and the values are (?203.63±2.92) kJ mol^?1 for KTaO₃ perovskite, and (?339.54±5.03) kJ mol^?1, (?369.71±4.84) kJ mol^?1, and (?364.78±4.24) kJ mol^?1, respectively, for non‐stoichiometric pyrochlores. That of stoichiometric defect K₂Ta₂O₆ pyrochlore, by extrapolation, is (?409.87±6.89) kJ mol^?1. Thus, the enthalpy of the stoichiometric pyrochlore and perovskite at K/Ta=1 stoichiometry are equal in energy within experimental error. By providing data on the thermodynamic stability of each phase, this work supplies knowledge on the phase‐formation process and phase stability within the K₂O?Ta₂O₅ system, thus assisting in the synthesis of materials with reproducible properties based on controlled processing. Additionally, the relation of stoichiometric and non‐stoichiometric pyrochlore with perovskite structure in potassium tantalum oxide system is discussed.     

Composition optimization and UV‐annealing dependence on the electrical properties of Hf1−xSixO2/Si gate stacks

Hf_1?xSi_xO₂ gate dielectrics grown by UV‐photo‐induced chemical vapor deposition (UV‐CVD) using Hf(OBu^t)₂(mmp)₂ and tetraethoxysilane as precursors have been deposited on Si substrate. Composition dependence of the interfacial microstructure of the Hf_1?xSi_xO₂/Si gate stacks has been investigated via Fourier transform infrared spectroscopy (FTIR) systematically. It has been indicated that the physical properties of the Hf_1?xSi_xO₂ films can be effectively optimized by adjusting the silicon contents incorporated in the films. In order to evaluate its potential implementation as an alternative dielectric in future devices, detailed electrical characterization of Au/Hf_1?xSi_xO₂/Si capacitor has been performed as functions of the silicon contents and the UV‐annealing time. Copyright © 2010 John Wiley & Sons, Ltd.     

UV laser deposition of nanostructured Si/C/O/N/H from disilazane precursors and evolution to silicon oxycarbonitride

Megawatt ArF laser photolysis of gaseous methyldisilazanes [(CH₃)_nH_3?nSi]₂NH (n = 2, 3) in excess of Ar yields hydrocarbons (major volatile products), methylsilanes (minor volatile products) and allows chemical vapour deposition of solid amorphous Si/C/O/N/H powder containing Si? X (X? C, H, O, N) bonds. The incorporation of O is due to a high reactivity of the primarily formed products towards air moisture. The resulting solid materials possess nanometer‐sized texture and high specific area, contain Si‐centered radicals and anneal under argon to silicon oxycarbonitride, whose structure is described as a network of O‐ and N‐interconnected Si and C atoms. Copyright © 2006 John Wiley & Sons, Ltd.     

Direct Evidence for a [4+2] Cycloaddition Mechanism of Alkynes to Tantallacyclopentadiene on Dinuclear Tantalum Complexes as a Model of Alkyne Cyclotrimerization

A dinuclear tantalum complex, [Ta₂Cl₆(μ‐C₄Et₄)] ( 2 ), bearing a tantallacyclopentadiene moiety, was synthesized by treating [(η²‐EtC?CEt)TaCl₃(DME)] ( 1 ) with AlCl₃. Complex 2 and its Lewis base adducts, [Ta₂Cl₆(μ‐C₄Et₄)L] (L=THF ( 3 a ), pyridine ( 3 b ), THT ( 3 c )), served as more active catalysts for cyclotrimerization of internal alkynes than 1 . During the reaction of 3 a with 3‐hexyne, we isolated [Ta₂Cl₄(μ‐η⁴:η⁴‐C₆Et₆)(μ‐η²:η²‐EtC?CEt)] ( 4 ), sandwiched by a two‐electron reduced μ‐η⁴:η⁴‐hexaethylbenzene and a μ‐η²:η²‐3‐hexyne ligand, as a product of an intermolecular cyclization between the metallacyclopentadiene moiety and 3‐hexyne. The formation of arene complexes [Ta₂Cl₄(μ‐η⁴:η⁴‐C₆Et₄Me₂)(μ‐η²:η²‐Me₃SiC?CSiMe₃)] ( 7 b ) and [Ta₂Cl₄(μ‐η⁴:η⁴‐C₆Et₄RH)(μ‐η²:η²‐Me₃SiC?CSiMe₃)] (R=nBu ( 8 a ), p‐tolyl ( 8 b )) by treating [Ta₂Cl₄(μ‐C₄Et₄)(μ‐η²:η²‐Me₃SiC?CSiMe₃)] ( 6 ) with 2‐butyne, 1‐hexyne, and p‐tolylacetylene without any isomers, at room temperature or low temperature were key for clarifying the [4+2] cycloaddition mechanism because of the restricted rotation behavior of the two‐electron reduced arene ligands without dissociation from the dinuclear tantalum center.     

Depth profiles of Ta2O5/SiO2/Si structures: a combined X-ray photoemission, Auger electron, and secondary ion mass spectroscopic study

Summary We prepared thin films of tantalum oxide on SiO₂/Si substrates by thermal oxidation of tantalum. The different oxide layers and their interfaces were characterized by SIMS, AES, and XPS. Characteristic structures were obtained after different oxidation procedures. The comparative discussion of AES and SIMS depth profiles makes possible an unequivocal characterization of the reactive interfaces between the oxides of Ta and Si. The Ta₂O₅/SiO₂ interface in particular shows non-stoichiometries which depend on the oxidation procedures and which determine the performance characteristics of pH-sensitive Ta₂O₅ field-effect transistors.

---

Tiefenprofile von Ta₂O₃/SiO₂/Si-Strukturen: Eine kombinierte Untersuchung mit Röntgen-Photoemissions-, Auger-Elektronen- und Sekundär-Ionen-Massen-Spektrometrie

     

Solid‐State NMR and DFT Studies on the Formation of Well‐Defined Silica‐Supported Tantallaaziridines: From Synthesis to Catalytic Application

Single‐site, well‐defined, silica‐supported tantallaaziridine intermediates [≡Si‐O‐Ta(η²‐NRCH₂)(NMe₂)₂] [R=Me ( 2 ), Ph ( 3 )] were prepared from silica‐supported tetrakis(dimethylamido)tantalum [≡Si‐O‐Ta(NMe₂)₄] ( 1 ) and fully characterized by FTIR spectroscopy, elemental analysis, and ¹H,¹³C HETCOR and DQ TQ solid‐state (SS) NMR spectroscopy. The formation mechanism, by β‐H abstraction, was investigated by SS NMR spectroscopy and supported by DFT calculations. The C?H activation of the dimethylamide ligand is favored for R=Ph. The results from catalytic testing in the hydroaminoalkylation of alkenes were consistent with the N‐alkyl aryl amine substrates being more efficient than N‐dialkyl amines.     

The Zintl Phase Eu2Si

The Zintl phase Eu₂Si was synthesized from elemental europium and silicon in a sealed tantalum tube in a high‐frequency furnace at 1270 K and subsequent annealing at 970 K. Investigation of the sample by X‐ray powder and single crystal techniques revealed: Co₂Si (anti‐PbCl₂) type, space group Pnma, a = 783.0(1), b = 504.71(9), c = 937.8(1) pm, wR2 = 0.1193, 459 F² values and 20 variables. The structure contains two europium and one silicon site. ¹⁵¹Eu Mössbauer spectroscopic data show a single signal at an isomer shift of −9.63(3) mm/s, compatible with divalent europium. Within the Zintl concept electron counting can be written as (2Eu²⁺)⁴⁺Si⁴⁻, in agreement with the absence of Si‐Si bonding. Each silicon atom has nine europium neighbors in the form of a tri‐capped trigonal prism. The silicon coordinations of the Zintl phases Eu₂Si, Eu₅Si₃, EuSi, and EuSi₂ are compared.     

Synthese,Struktur und Eigenschaften der tantalreichen Silicidchalkogenide Ta15Si2QxTe10–x (Q = S,Se)

Synthesis, Structure, and Properties of the Tantalum‐rich Silicide Chalcogenides Ta₁₅Si₂Q_xTe_10–x (Q = S, Se) The quaternary tantalum silicide chalcogenides Ta₁₅Si₂Q_xTe_10–x (Q = S, Se) are accessible from proper, compacted mixtures of the respective dichalcogenides, silicon and elemental tantalum at 1770 K in sealed molybdenum tubes. The structures were determined from the strongest X‐ray intensities of fibrous crystals with cross sections of about 3 μm and confirmed by fitting the profile of single phase X‐ray diffractograms. The phases Ta₁₅Si₂S_3.5Te_6.5 and Ta₁₅Si₂Se_3.5Te_6.5 crystallize in the monoclinic space group C2/m with two formula units per unit cell, a = 2393.7(1) pm, b = 350.08(2) pm, c = 1601.2(1) pm, β = 124.700(4)°, and a = 2461.3(2) pm, b = 351.70(2) pm, c = 1601.7(1) pm, β = 124.363(5)°, respectively. Tri‐capped trigonal prismatic Ta₉Si clusters stabilized by encapsulated Si atoms can be seen as the characteristic unit of the structure. The clusters are fused into twin columns which are connected by additional Ta atoms, thus forming corrugated layers. The remaining valences at the surfaces of the layered Ta–Si substructure are saturated by those of chalcogen atoms which are coordinated only from one side by three, four or five Ta atoms. Few bridging covalent Ta–S–Ta and Ta–Se–Ta bonds and, otherwise, dispersive interactions between the Q atoms hold these nearly one nanometer wide slabs together. The phases are moderate metallic conductors. There is no evidence for any electronic instability within 10–310 K in spite of the high anisotropy of the structures.     

A Redox‐Mediator‐Free Solar‐Driven Z‐Scheme Water‐Splitting System Consisting of Modified Ta3N5 as an Oxygen‐Evolution Photocatalyst

Tantalum nitride (Ta₃N₅) modified with various O₂‐evolution cocatalysts was employed as a photocatalyst for water oxidation under visible light (λ>420 nm) in an attempt to construct a redox‐mediator‐free Z‐scheme water‐splitting system. Ta₃N₅ was prepared by nitriding Ta₂O₅ powder under a flow of NH₃ at 1023–1223 K. The activity of Ta₃N₅ for water oxidation from an aqueous AgNO₃ solution as an electron acceptor without cocatalyst was dependent on the generation of a well‐crystallized Ta₃N₅ phase with a low density of anionic defects. Modification of Ta₃N₅ with nanoparticulate metal oxides as cocatalysts for O₂ evolution improved water‐oxidation activity. Of the cocatalysts examined, cobalt oxide (CoO_x) was found to be the most effective, improving the water‐oxidation efficiency of Ta₃N₅ by six to seven times. Further modification of CoO_x/Ta₃N₅ with metallic Ir as an electron sink allowed one to achieve Z‐scheme water splitting under simulated sunlight through interparticle electron transfer without the need for a shuttle redox mediator in combination with Ru‐loaded SrTiO₃ doped with Rh as a H₂‐evolution photocatalyst.     

Catalytic transformation of silicon tetraisocyanate Si(NCO)4 to a polymeric silylcarbodiimide

A new way for the preparation of inorganic polymeric carbodiimide‐based networks is presented which resembles the transformation of molecular isocyanates using 1‐phenyl‐3‐methyl‐2‐phospholene‐1‐oxide as a catalyst. The respective reaction sequence, well established in preparative organic chemistry, has been applied for the synthesis of carbodiimide‐based SiNC(O) materials. Starting from Si(NCO)₄ (silicon tetraisocyanate), a transformation to an insoluble extended inorganic array was achieved in boiling dodecan (T = 216 °C). Analysis of the polymer using X‐ray diffraction, FT‐IR, density measurement, matrix‐assisted laser desorption/ionization time of flight and TGA revealed that this highly moisture‐sensitive amorphous network consists of oligomers of high molar mass and exhibits a high density of around 1.5 g cm^?3, which corresponds quite well to the calculated density of crystalline Si(NCN)₂ reported in the literature. Degradation of this 'SiNC(O) phase' with the release of N₂ and (CN)₂ finally provided SiC as the only crystalline product. No indication of the formation of crystalline Si₃N₄ or intermediate crystalline 'SiC₂N₄', silicon carbodiimide (= Si(NCN)₂), was noticed. Copyright © 2013 John Wiley & Sons, Ltd.     

High-temperature experimental and theoretical study of magnetic interactions in diamond and pseudo-diamond frameworks built up from hexanuclear tantalum clusters

Magnetic interactions in solid‐state tantalum cluster compounds have been evidenced by using magnetic susceptibility measurements and corroborated by broken‐symmetry DFT calculations. The three selected compounds are based on [Ta₆X₁₂(H₂O)₆]³⁺ (X=Cl or/and Br) units with edge‐bridged Ta₆ octahedral clusters. Although two of them crystallise in the tetragonal space group I4₁/a, all compounds exhibit a similar arrangement of paramagnetic clusters related to the diamond structural framework (Fd$\bar 3Magnetic interactions in solid-state tantalum cluster compounds have been evidenced by using magnetic susceptibility measurements and corroborated by broken-symmetry DFT calculations. The three selected compounds are based on [Ta(6)X(12)(H(2)O)(6)](3+) (X=Cl or/and Br) units with edge-bridged Ta(6) octahedral clusters. Although two of them crystallise in the tetragonal space group I4(1)/a, all compounds exhibit a similar arrangement of paramagnetic clusters related to the diamond structural framework (Fd ?3m space group). Magnetic parameters were fitted by using the [5,4] Padé approximant of high-temperature series expansion of susceptibility for the Heisenberg model (S=1/2) in the diamond framework, assuming only nearest-neighbouring interactions. Such a model appropriately describes magnetic-susceptibility measurements at temperatures T>0.7|J|/k. The magnetic interaction parameter J between two [Ta(6)Cl(12)(H(2)O)(6)](3+) clusters is estimated to be -64.28(7) cm(-1) ; it has been enhanced by replacing several chlorine inner ligands with bromine ones (J=-123(3) cm(-1) for two [Ta(6)Br(7.7(1))Cl(4.3(1))(H(2)O)(6)](3+) clusters) and is strongest between two bromine [Ta(6)Br(12)(H(2)O)(6)](3+) clusters with a value of -155(1) cm(-1) . Broken-symmetry DFT calculations within spin-dimer analysis confirmed this trend. Those interactions can be explained on the basis of the overlap between singly occupied a(2u) orbitals localised on neighbouring clusters.     

Dynamic mechanical and dielectric properties of ORMOCER® incorporating functionalized poly(styrene) latexes

Organically modified aluminosilicate hybrid materials incorporating polystyrene and poly(styrene‐co‐hydroxypropyl acrylate) latexes, (3‐glycidyloxypropyl) trimethoxysilane, and aluminum sec‐butoxide [Al(O^sBu)₃] were synthesized by a sol–gel process. The bulk materials obtained were macroscopically homogeneous dispersions with good mechanical properties. Dynamic mechanical and dielectric analyses of these new hybrid materials as a function of the Al(O^sBu)₃ concentration and copolymer composition revealed a series of transitions that represented relaxation processes of the incorporated polymer (glass transition), ?Al? O? Si?, the ?Si? O? Si? part of the network, and segmental motion of unreacted ?Si? (CH₂)₃OCH₂CHCH₂O chains. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 860–867, 2001     

PO → Si intramolecular coordination in the derivatives of 1,4‐phosphasilacyclohexane 1‐oxides

The chair and boat conformers for a series of derivatives of 1,4‐phosphasilacyclohexane 1‐oxides have been calculated at the B3LYP/6‐311+G** level of theory in the gas phase and taking into account the effect of solvent polarity using the IEF‐PCM model. The stability of the boat conformers containing pentacoordinate silicon due to formation of the P?O→Si intramolecular coordination bond depends on the environment of the phosphorus atom and polarity of the solvent, and the strength of the transannular bond depends also on the nature of the substituents at the silicon atom. The highly polar boat conformers are strongly stabilized in the DMSO solution. NBO analysis showed the importance of the σ(C? Si) → σ*(H₃C? N) hyperconjugative interaction in the two H₃C? N? C? Si fragments of the ring favoring the formation of the pentacoordinate silicon atom. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Dielectric and mechanical properties of anodic films in the Ta–Ti system

Anodic oxidation at high efficiency of sputtering‐deposited Ta–Ti alloys containing 0.6–40 at.% Ti is shown to result in amorphous films comprising a relatively thin outer layer of TiO₂‐based material and an inner layer consisting of units of TiO₂ and Ta₂O₅. The two layers develop due to the faster migration of Ti⁴⁺ ions in the inner layer relative to that of Ta⁵⁺ ions. The formation ratios for the various films are in the approximate range 1.6–1.9 nm V^?1. The dielectric constants of the films are ～28, which is a similar value to that of anodic tantala. Nanoindentation revealed that the elastic modulus and hardness of the films are essentially independent of film composition, with average values of 134 and 5.3 GPa, respectively. Copyright © 2003 John Wiley & Sons, Ltd.     

Interface Engineering of a CoOx/Ta3N5 Photocatalyst for Unprecedented Water Oxidation Performance under Visible‐Light‐Irradiation

Cocatalysts have been extensively used to promote water oxidation efficiency in solar‐to‐chemical energy conversion, but the influence of interface compatibility between semiconductor and cocatalyst has been rarely addressed. Here we demonstrate a feasible strategy of interface wettability modification to enhance water oxidation efficiency of the state‐of‐the‐art CoO_x/Ta₃N₅ system. When the hydrophobic feature of a Ta₃N₅ semiconductor was modulated to a hydrophilic one by in situ or ex situ surface coating with a magnesia nanolayer (2–5 nm), the interfacial contact between the hydrophilic CoO_x cocatalyst and the modified hydrophilic Ta₃N₅ semiconductor was greatly improved. Consequently, the visible‐light‐driven photocatalytic oxygen evolution rate of the resulting CoO_x/MgO(in)–Ta₃N₅ photocatalyst is ca. 23 times that of the pristine Ta₃N₅ sample, with a new record (11.3 %) of apparent quantum efficiency (AQE) under 500–600 nm illumination.     

A half‐sandwich TaV dichlorido complex containing an O,N,O′‐tridentate Schiff base ligand: synthesis,crystal structure and in vitro cytotoxicity

A new electroneutral half‐sandwich tantalum(V) dichlorido complex containing pentamethylcyclopentadienyl (Cp*) and the double‐deprotonated version of the Schiff base 2‐ethoxy‐6‐{(E)‐[(2‐hydroxyphenyl)imino]methyl}phenol (H₂L) as ligands, namely cis‐dichlorido(2‐ethoxy‐6‐{(E)‐[(2‐oxidophenyl)imino]methyl}phenolato‐κ³O,N,O′)(η⁵‐pentamethylcyclopentadienyl)tantalum(V), [Ta(C₁₀H₁₅)(C₁₅H₁₃NO₃)Cl₂] or [Ta(η⁵‐Cp*)(L)Cl₂], has been prepared and thoroughly characterized by elemental analysis, IR and NMR spectroscopy, mass spectrometry, density functional theory (DFT) calculations and single‐crystal X‐ray diffraction. The molecular structure revealed that the Ta^V centre is coordinated by a η⁵‐Cp* ligand, two monodentate chlorido ligands and one O,N,O′‐tridentate L^2? ligand. The crystal structure is stabilized by C—H…C, C—H…Cl and C…C intermolecular interactions. Moreover, the complex shows notable in vitro cytotoxicity against the A2780 human ovarian carcinoma cell line, with IC₅₀ = 14.4 µM, which is higher than that of the conventional platinum‐based anticancer drug cisplatin (IC₅₀ = 20.1 µM).     

Novel tantalum phosphate Na13Sr2Ta2(PO4)9: synthesis,crystal structure,DFT calculations and Dy3+‐activated fluorescence performance

A new tantalum phosphate, tridecasodium distrontium ditantalum nonaphosphate, Na₁₃Sr₂Ta₂(PO₄)₉, was prepared using the high‐temperature flux method. The structure can be described as a three‐dimensional open framework containing isolated [Ta^V₂(PO₄)₉]¹⁷⁻ units that are interlocked by Na and Sr ions. Band structure studies by the first‐principles method revealed that Na₁₃Sr₂Ta₂(PO₄)₉ is an insulator with an indirect band gap of 4.78 eV, which makes it suitable as a luminescent host matrix. A series of solid solutions, i.e. Na₁₃Sr_2–xTa₂(PO₄)₉:xDy³⁺ (x = 0.01, 0.02, 0.04, 0.06, 0.08, 0.1, 0.12 and 0.14), were prepared and their photoluminescence properties studied. Under 350 nm light excitation, these emit two typical emissions of the Dy³⁺ ion, i.e. the ⁴F_9/2→⁶H_15/2 transition centred at 476 nm and the ⁴F_9/2→⁶H_13/2 transition centred at 570 nm.     

Synthese und Struktur von Tetrachloro[4-tert-butyl-2(diphenylphosphanyl-κP-methyl)phenolato-κO]tantal(V), ein neuartiger TaV-Komplex mit einem chelatisierenden Aryloxyphosphanliganden

Synthesis and Structure of Tetrachloro[4- tert -butyl-2(diphenylphosphanyl-κP-methyl)phenolato-κO]tantalum(V), a Novel Ta^V Complex with a Chelating Aryloxy Phosphane Ligand 4-tert-Butyl-2-(diphenylphosphanylmethyl)anisol ( 1 ) is prepared from 2-chlormethyl-4-tert-butylanisol and potassium diphenylphosphide in very good yields as a novel oxygen-phosphorus compound with potentially hemilabile ligand properties. Compound 1 reacts with tantalum pentachloride under cleavage of methylchloride revealing the complex tetrachloro[4-tert-butyl-2-(diphenylphosphanyl-κP-methyl)phenolato-κO]tantalum(V) ( 2 ) with a distorted octahedrally coordinated tantalum atom and a chelating aryloxy phosphane ligand. Complex 2 crystallizes in the tetragonal, chiral space group P4₁2₁2 with a = 11.719(5), c = 37.95(5) Å, V = 5171(7) ų, Z = 8. ³¹P NMR spectroscopic studies of 2 establish the coordination of the phosphane unit to the Ta^V center in solution.     

The Cocrystallization of the Cubic [Ta6Br12(H2O)6][CuBr2X2]·10H2O and Triclinic [Ta6Br12(H2O)6]X2·trans‐[Ta6Br12(OH)4(H2O)2]·18H2O (X = Cl,Br, NO3) Phases with the Coexistence of [Ta6Br12]2+ and [Ta6Br12]4+ in the Latter

Cubic [Ta₆Br₁₂(H₂O)₆][CuBr₂X₂]·10H₂O and triclinic [Ta₆Br₁₂(H₂O)₆]X₂·trans‐[Ta₆Br₁₂(OH)₄(H₂O)₂]·18H₂O (X = Cl, Br, NO₃) cocrystallize in aqueous solutions of [Ta₆Br₁₂]²⁺ in the presence of Cu²⁺ ions. The crystal structures of [Ta₆Br₁₂(H₂O)₆]Cl₂·trans‐[Ta₆Br₁₂(OH)₄(H₂O)₂]·18H₂O ( 1 ) and [Ta₆Br₁₂(H₂O)₆]Br₂·trans‐[Ta₆Br₁₂(OH)₄(H₂O)₂]·18H₂O ( 3 )have been solved in the triclinic space group P&1macr; (No. 2). Crystal data: 1 , a = 9.3264(2) Å, b = 9.8272(2) Å, c = 19.0158(4) Å, α = 80.931(1)?, β = 81.772(2)?, γ = 80.691(1)?; 3 , a = 9.3399(2) Å, b = 9.8796(2) Å, c = 19.0494(4) Å; α = 81.037(1)?, β = 81.808(1)?, γ = 80.736(1)?. 1 and 3 consist of two octahedral differently charged cluster entities, [Ta₆Br₁₂]²⁺ in the [Ta₆Br₁₂(H₂O)₆]²⁺ cation and [Ta₆Br₁₂]⁴⁺ in trans‐[Ta₆Br₁₂(OH)₄(H₂O)₂]. Average bond distances in the [Ta₆Br₁₂(H₂O)₆]²⁺ cations: 1 , Ta‐Ta, 2.9243 Å; Ta‐Brⁱ , 2.607 Å; Ta‐O, 2.23 Å; 3 , Ta‐Ta, 2.9162 Å; Ta‐Brⁱ , 2.603 Å; Ta‐O, 2.24 Å. Average bond distances in trans‐[Ta₆‐Br₁₂(OH)₄(H₂O)₂]: 1 , Ta‐Ta, 3.0133 Å; Ta‐Brⁱ, 2.586 Å; Ta‐O(OH), 2.14 Å; Ta‐O(H₂O), 2.258(9) Å; 3 , Ta‐Ta, 3.0113 Å; Ta‐Brⁱ, 2.580 Å; Ta‐O(OH), 2.11 Å; Ta‐O(H₂O), 2.23(1) Å. The crystal packing results in short O···O contacts along the c axes. Under the same experimental conditions, [Ta₆Cl₁₂]²⁺ oxidized to [Ta₆Cl₁₂]⁴⁺ , whereas [Nb₆X₁₂]²⁺ clusters were not affected by the Cu²⁺ ion.