Core‐shell nanoparticles with hyperbranched poly(arylene‐oxindole) interiors

Core‐shell type star polymers composed of poly(tert‐butyl acrylate) (poly(t‐BuA)) arms and 100% hyperbranched poly(arylene‐oxindole) interiors were synthesized via the “core‐first” method. Atom transfer radical polymerization of t‐BuA initiated by 2‐bromopropionyl terminal groups of the hyperbranched core was applied for the synthesis of the stars. The resultant star structures were characterized by gel permeation chromatography with triple detection. Polymers of molar masses M_n up to 1.68 × 10⁵ g/mol were obtained. The obtained star polymers compared with the linear counterparts of the same molar mass have a much more compact structure in solution. The intrinsic viscosities of the stars are also significantly lower than their linear counterparts. Light scattering experiments were performed to provide information about the size of these macromolecules in solution. Preliminary characterization of the thermal properties of these novel materials is also reported. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1120–1135, 2009     

pH‐responsive polymer core–shell nanospheres for drug delivery

Stimuli‐responsive polymer nanoparticles are playing an increasingly more important role in drug delivery applications. However, limited knowledge has been accumulated about processes which use stimuli‐responsive polymer nanospheres (matrix nanoparticles whose entire mass is solid) to carry and deliver hydrophobic therapeutics in aqueous solution. In this research, pyrene was selected as a model hydrophobic drug and a pyrene‐loaded core‐shell structured nanosphere named poly(DEAEMA)‐poly(PEGMA) was designed as a drug carrier where DEAEMA and PEGMA represent 2‐(diethylamino)ethyl methacrylate and poly(ethylene glycol) methacrylate, respectively. The pyrene‐loaded core‐shell nanospheres were prepared via an in situ two‐step semibatch emulsion polymerization method. The particle size of the core‐shell nanosphere can be well controlled through adjusting the level of surfactant used in the polymerization where an average particle diameter of below 100 nm was readily achieved. The surfactant was removed via a dialysis operation after polymerization. Egg lecithin vesicles (liposome) were prepared to mimic the membrane of a cell and to receive the released pyrene from the nanosphere carriers. The in vitro release profiles of pyrene toward different pH liposome vesicles were recorded as a function of time at 37 °C. It was found that release of pyrene from the core‐shell polymer matrix can be triggered by a change in the environmental pH. In particular the pyrene‐loaded nanospheres are capable of responding to a narrow window of pH change from pH = 5, 6, to 7 and can achieve a significant pyrene release of above 80% within 90 h. The rate of release increased with a decrease in pH. A first‐order kinetic model was proposed to describe the rate of release with respect to the concentration of pyrene in the polymer matrix. The first‐order rate constant of release k was thus determined as 0.049 h^?1 for pH = 5; 0.043 h^?1 for pH = 6; and 0.035 h^?1 for pH = 7 at 37 °C. The release of pyrene was considered to follow a diffusion‐controlled mechanism. The synthesis and encapsulation process developed herein provides a new approach to prepare smart nanoparticles for efficient delivery of hydrophobic drugs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4440–4450     

Preparation of polymer/silica composite nanoparticles bearing carboxyl groups on the surface via emulsifier‐free emulsion copolymerization

Polymer/silica organic/inorganic composite nanoparticles bearing carboxyl groups on the surface were prepared via the emulsifier‐free emulsion copolymerization of methyl methacrylate and sodium methacrylate (NaMA). Carboxyl groups were generated by the addition of hydrochloric acid at the end of the copolymerization. Two methods of NaMA addition were studied: batch and two‐stage procedures. The batch procedure allowed only a limited number of carboxyl groups to effectively bond to the composite nanoparticles. In contrast, the number of carboxyl groups could be altered over a wide range with the two‐stage procedure. Fourier transform infrared spectroscopy and chemical titration were independently used to quantify the number of carboxyl groups, giving values close to each other and to the feed. A kinetic study indicated that the copolymerization followed a mechanism different than that found earlier. The average size of the composite nanoparticles was approximately 40 nm, as measured by both transmission electron microscopy (TEM) and laser scattering, and their polydispersity index was close to 1, indicating a fairly narrow size distribution. TEM photographs of the composite nanoparticles showed a multilayered core–shell structure with one silica bead as the core and with poly(methacrylate acid) as the outmost shell. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2826–2835, 2005     

Azide‐functionalized nanoparticles as quantized building block for the design of soft–soft fluorescent polystyrene core—PAMAM shell nanostructures

This work deals with the covalent coupling of azide‐functionalized polymeric nanoparticles as a reactive core and amino‐terminated PAMAM dendrons as a reactive shell. The nanoassemblies thereby obtained could be modified after the dendronization step by grafting an alkynyl Bodipy dye on the unreacted azide moieties. Only a few steps are required to attain nanoassemblies that could mimic dendrimers of high generation with sizes of nano‐objects beyond those of dendrimers. The structure of the nanoassemblies are composed of a polystyrene core, an inner shell including the Bodipy dyes along with the internal branches of the PAMAM, and the terminal amino groups from the outer shell. The dendritic shell acts as a protective layer that prevents NP from aggregation in a surfactant free aqueous solution. The nano‐objects display absorption and emission maxima above 500 nm with brightness that are the same order of magnitude than Qdots. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 115–126     

Core‐shell particles with glycopolymer shell and polynucleoside core via RAFT: From micelles to rods

Amphiphilic block copolymers were synthesized via the reversible addition fragmentation chain transfer (RAFT) copolymerisation of 2‐methacrylamido glucopyranose (MAG) and 5′‐O‐methacryloyl uridine (MAU). Homopolymerisations of both monomers using (4‐cyanopentanoic acid)‐4‐dithiobenzoate (CPADB) proceeded with pseudo first order kinetics in a living fashion, displaying linear evolution of molecular weight with conversion and low PDIs. A bimodal molecular weight distribution was observed for PMAU at low conversions courtesy of hybrid behavior between living and conventional free radical polymerization. This effect was more pronounced when a PMAG macroRAFT agent was chain extended with MAU, however, in both cases, good control was attained once the main RAFT equilibrium was established. A stability study on PMAU found that its hydrolysis is diffusion controlled, and is accelerated at physiological pH compared with neutral conditions. Self‐assembly of four block copolymers with increasing hydrophobic (PMAU) block lengths produced micelles, which demonstrated an increased tendency to form rods as the PMAU block length increased. Interestingly, none of the block copolymers were surface‐active. An initial assessment of PMAU's ability to bind the nucleoside adenosine through base pairing was highly promising, with DSC measurements indicating that adenosine is fully miscible in the PMAU matrix. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1706–1723, 2009     

Core‐shell structure microcapsules with dual pH‐responsive drug release function

We report dual pH‐responsive microcapsules manufactured by combining electrostatic droplets (ESD) and microfluidic droplets (MFD) techniques to produce monodisperse core (alginate)‐shell (chitosan) structure with dual pH‐responsive drug release function. The fabricated core‐shell microcapsules were size controllable by tuning the synthesis parameters of the ESD and MFD systems, and were responsive in both acidic and alkaline environment, We used two model drugs (ampicillin loaded in the chitosan shell and diclofenac loaded in the alginate core) for drug delivery study. The results show that core‐shell structure microcapsules have better drug release efficiency than respective core or shell particles. A biocompatibility test showed that the core‐shell structure microcapsules presented positive cell viability (above 80%) when evaluated by the 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) assay. The results indicate that the synthesized core‐shell microcapsules were a potential candidate of dual‐drug carriers.     

Synthesis of pH‐responsive magnetic yolk–shell nanoparticles: A comparison between conventional etching and new deswelling approaches

Iron oxide (Fe₃O₄) magnetic nanoparticles as movable cores were used to synthesize yolk–shell nanoparticles with pH‐responsive shell composed of ethylene glycol dimethacrylate (EGDMA)‐crosslinked poly(acrylic acid) (PAA) via two different routes. In the first more common route, Fe₃O₄ nanoparticles were coated with silica layer via the Stöber process to yield Fe₃O₄@SiO₂ core–shell nanoparticles, subsequently used as seeds in the distillation precipitation copolymerization of AA and EGDMA to yield Fe₃O₄@SiO₂@P(AA‐EGDMA). The silica layer was selectively removed through alkali etching to yield Fe₃O₄@air@P(AA‐EGDMA). In the second route, Fe₃O₄ nanoparticles without any stabilization were used as seeds in the distillation precipitation copolymerization of AA and EGDMA to yield Fe₃O₄@P(AA‐EGDMA) core–shell nanoparticles. The nanoparticles were subsequently dispersed in acidic medium of pH = 2. Yolk–shell Fe₃O₄@air@P(AA‐EGDMA) nanoparticles were formed through deswelling of crosslinked PAA because of protonation of carboxyl groups at low pH values. Various techniques were utilized to investigate the characteristics of the synthesized core–shell nanoparticles. Formation of yolk–shell nanostructure was observed for both synthesis routes, namely etching of silica layer and deswelling approaches, from vibrating sample magnetometry and transmission electron microscopy results. Both types of nanoparticles showed pH‐responsive behaviour, i.e. decrease in absorption with increase in pH, as examined using UV–visible spectroscopy.     

Preparation of epoxy‐functionalized polystyrene/silica core–shell composite nanoparticles

Epoxy‐functionalized polystyrene/silica core–shell composite nanoparticles were prepared by the postaddition of glycidyl methacrylate (GMA) via emulsion polymerization. The outermost shell of obtained multilayered core–shell particles was made up of poly(glycidyl methacrylate) (PGMA). A semicontinuous process involving the dropwise addition of GMA was used to avoid demulsification of the emulsion system. The amount of grafted PGMA was quantified by Fourier transform infrared spectroscopy and was altered in a wide range (1–50 wt % to styrene). The binding efficiency was usually high (ca. 90%), indicating strong adhesion between the silica core and the polymer shell. There were approximately four or five original silica beads, which formed a cluster, per composite of nanoparticles whose size was about 60–70 nm. Other main factors of polymerization conditions including the amounts of sodium dodecyl sulfonate and silica are also discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2253–2262, 2004     

Fabrication and Characterization of Sulfonate‐containing Polystyrene/CaCO3 Core‐shell Nanoparticles

Polystyrene (PSt) seed latex was first prepared via soap‐free emulsion polymerization in the presence of a small amount of methacrylic acid using ammonium persulfate as initiator, and then seeded emulsion polymerization of sodium 4‐styrenesulfonate (NaSS) and St was carried out to synthesize P(St‐NaSS) core latex using 2,2′‐azobisisobutyronitrile as initiator. After that, P(St‐NaSS)/CaCO₃ core‐shell nanoparticles were fabricated by sequentially introducing Ca(OH)₂ aqueous solution and CO₂ gas into the core latex. The morphology of the core and core‐shell nanoparticles was characterized by dynamic light scattering (DLS) and transmission electron microscopy (TEM), and the state of CaCO₃ shell was confirmed with high‐resolution scanning transmission electron microscope (HR‐STEM) and selected area electron diffraction (SAED). Results showed that PNaSS chains were successfully grafted onto the PSt seed surface, and length of the PNaSS "hairs" could be modulated by adjusting NaSS amount. Sulfonic groups of the PNaSS hairs served as additives in the formation and stabilization of amorphous CaCO₃(ACC) and prevented ACC from sequent transformation into crystalline states. The amount of the anchored CaCO₃ increased with the growth of PNaSS hair length, and reached 51 wt% (by thermalgravimetric analysis) under the optimal encapsulating temperature of 45°C. Moreover, the forming mechanism of P(St‐NaSS)/CaCO₃ core‐shell nanoparticles was proposed.     

A versatile preparation of azobenzene‐dye functionalized colored polymer nanoparticles by surface modification

A series of stable and translucent colored nanolatex, that is, colloidal aqueous suspensions of dye‐tagged polymer nanoparticles (NPs) in the 15‐ to 20‐nm diameter range, have been prepared by covalent attachment of azobenzene chromophores to the surface of reactive NPs. Primary crosslinked NPs bearing chlorobenzyl groups were produced by microemulsion copolymerization of styrene and vinylbenzylchloride. Amine‐functionalized NPs were obtained after a second functionalization step with polyamines (cyclam and polypropyleneimine dendrimers of first and third generations). Dye‐doped particles were obtained by reacting pyridylazo‐dimethylaminobenzene (PADA) with chlorobenzyl‐NPs and by reacting amine‐reactive dimethylaminoazobenzene dyes (DABsyl, DAB‐ITC) as well as Disperse Red 1 acrylate with polyamine‐coated NPs. Regardless the dye solubility, the grafting readily proceeded in aqueous suspensions at room temperature in the presence of a cationic surfactant without added solvent. Purple, red, and orange suspensions (maximum absorption around 550, 500, 430 nm), with dye loads ranging from 0.3 to 1.2 mmol/g, corresponding to 400–1800 azobenzene residues per NP, are obtained. The reported results indicate that functional polymer NPs, with remarkably accessible multiple anchoring sites, are useful building blocks. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3375–3386, 2008     

Ordered Microporous Surface Films Formed by Core‐Shell‐Type Nanospheres

Summary: Polymer nanospheres are synthesized by free‐radical dispersion copolymerization of methyl methacrylate (MMA) and ethylene glycol dimethacrylate (EGDM) with a methacryloyl‐terminated polystyrene (PS‐MC) macromonomer in cyclohexane. Such polymer nanospheres are stabilized sterically with polystyrene (PS)‐grafted chains in cyclohexane at temperatures greater than 34 °C (the Θ temperature for PS). Ordered microporous surface films are constructed by casting these core‐shell‐type nanospheres from hot cyclohexane solution at 20 °C. The results indicate the possibility of fixation or encapsulation of functional materials after microporous patterning of the core‐shell‐type nanospheres.

SEM photograph of a vertical section of a hexagonal micropore film obtained here.     

Optically active composite nanoparticles with chemical bonds between core and shell

A facile methodology was developed to prepare a novel type of core/shell nanoparticles (NPs) with optical activity and with chemical bonds between the cores and shells. The cores were prepared via catalytic emulsion copolymerization of substituted acetylene comonomers in which one monomer contains azo groups in side chains. For preparing the core/shell NPs, the azo groups in the seed particles (i.e., cores) subsequently act as initiators for vinyl monomer to undergo free radical polymerizations, yielding the shells. This situation resulted in chemical bonds between cores and shells. Both the seed emulsion and core/shell nanoparticle emulsion exhibited optical activity, derived from the polyacetylenes adopting helical conformation of predominant handedness. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Novel side‐chain naphthalimide polyphenylacetylene as a ratiometric fluorescent chemosensor for fluoride ion

Novel polyphenylacetylene ( P1 ) containing naphthalimides units in the side chain was designed and synthesized. The structure and properties of the polymer were characterized and evaluated by IR, NMR, UV, and PL. The measurements of sensing behavior to various halide anions, that is, F^?, Cl^?, Br^?, and I^?, reveal that the polymer is a ratiometric fluorescent chemosensors for fluoride ion. The polymer sensor shows spectral shifts and intensity changes in the presence of fluoride, in a wavelength‐ratiometric and ‐colorimetric manner, which can detect fluoride concentrations in range of 10–100 μM at visible wavelengths. The obvious colorless‐to‐yellow color change and blue‐to‐orange emission color change on the addition of fluoride ion are easily observed by naked eyes. It provides a feasible way to construct a ratiometric fluorescent chemosensors for fluoride ion. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1544–1552, 2009     

Two‐dimensional non‐close‐packed arrays of nanoparticles via core‐shell nanospheres and reactive ion etching

Nanosized PTFE/polystyrene core‐shell particles were prepared by seed emulsion polymerization technique starting from PTFE seeds of 20 nm. At the end of the reaction, no residual PTFE nor secondary nucleation was observed and by appropriately choosing the ratio between the monomer and the PTFE seed it was possible to obtain particles, with predetermined size in the range 60–100 nm, featuring an extremely narrow size distribution. These particles were successfully employed as building blocks for the preparation of large scale nanosized monolayers through the floating technique. Reactive ion etching was further applied to modulate the size characteristics of the resulting 2D ordered nanostructure. Although for relatively short RIE times a peculiar continuous morphology was observed in which the particles are interconnected through thin arms, on further increasing the RIE time a well‐organized 2D arrangement of particles with size of about 30 nm was obtained. Considering the shell as an expendable ordering and spacing tool, the use of core‐shell nanospheres allows a wide variety of controlled morphologies to be designed and prepared thus opening new perspectives for nanostructure fabrication processes through nanosphere lithography (NSL). Copyright © 2011 John Wiley & Sons, Ltd.     

PMMA‐based core‐shell nanoparticles with various PTFE cores

Polytetrafluoroethylene (PTFE) latices with spherical and rod‐like particles in the submicrometer size range, were employed as seeds in the emulsifier‐free methylmethacrylate (MMA) emulsion polymerization to obtain PTFE‐polymethylmethacrylate (PMMA) core‐shell nanoparticles. Stable latices were generally obtained. No residual PTFE was found at the end of the reaction. By appropriately choosing the ratio between MMA and PTFE in the reaction mixture, particles with predetermined size and monodisperse or narrow size distribution were prepared. The high structural regularity of the core‐shell samples allows the preparation of film with a periodic distribution of the cores thus ultimately leading to a well structured 2D colloidal crystal. A very peculiar crystallization behavior was observed because of the PTFE compartmentalization in the composite. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2928–2937, 2009     

RAFT made methacrylate copolymers for reversible pH‐responsive nanoparticles

In this study, we designed and investigated pH‐responsive nanoparticles based on different ratios of monomers with primary, secondary or tertiary amino groups. For this purpose, copolymers of methyl methacrylate (MMA) with different compositions of amino methacrylates (2‐(dimethylamino)ethyl methacrylate (DMAEMA), 2‐(tert‐butylamino)ethyl methacrylate (tBAEMA) and 2‐aminoethyl methacrylate hydrochloride (AEMA·HCI)) were synthesized using the reversible addition‐fragmentation chain transfer (RAFT) polymerization process. The controlled nature of the radical polymerization was demonstrated by kinetic studies. All copolymers show low dispersities (?_M < 1.2) with amino contents between 9 and 21 mol %. For the nanoparticle formation, nanoprecipitation with subsequent solvent evaporation was used. All suspensions were characterized by dynamic light scattering (DLS) and scanning electron microscopy (SEM). Different initial conditions of the formulations resulted in differently sized nanoparticles that have monomodal size distributions, relatively narrow polydispersity index (PDI) values and positive zeta potential values. The pH‐stability test results demonstrated that, depending on the structure and amount of the amino content, the obtained nanoparticles reveal a reversible pH‐response, such as dissolution at acidic pH values. The ability of the nanoparticles to encapsulate guest molecules was confirmed by pyrene fluorescence studies. The cytotoxicity assay results showed that the nanoparticles did not have any significant cytotoxic effect. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2711–2721     

The preparation of amphiphilic core‐shell nanospheres by using water‐soluble macrophotoinitiator

The amphiphilic poly(AM‐co‐SA)‐ITXH macrophotoinitiator was synthesized by precipitation photopolymerization under UV irradiation with isopropylthioxanthone (ITX) as free radical photoinitiator. A novel method has been developed to prepare amphiphilic core‐shell polymer nanospheres via photopolymerization of methyl methacrylate (MMA) in aqueous media, with amphiphilic copolymer macrophotoinitiator poly(AM‐co‐SA)‐ITXH. During polymerization, the amphiphilic macroradicals underwent in situ self‐assembly to form polymeric micelles, which promoted the emulsion polymerization of the monomer. Thus, amphiphilic core‐shell nanospheres ranging from 70 to 140 nm in diameter were produced in the absence of surfactant. The conversion of the monomer, number average molecular weights (M_n), and particle size were found to be highly dependent on the macrophotoinitiator and monomer concentration. The macrophotoinitiator and amphiphilic particles were characterized by FTIR, UV‐vis, ¹H NMR, TEM, DSC, and contact angle measurements. The results showed the particles had well‐defined amphiphilic core‐shell structure. This new method is scientifically and technologically significant because it provides a commercially viable route to a wide variety of novel amphiphilic core‐shell nanospheres. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 936–942, 2010     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

Solution route to inorganic nanobelt‐conducting organic polymer core‐shell nanocomposites

A facile and versatile solution‐based approach was developed to prepare semiconductor metal oxide nanobelt‐conducting organic polymer core‐shell nanocomposites. Well‐defined nanobelts of several types of oxide nanobelts were combined with conducting polymer [polypyrrole (PPy) and polyaniline (PANi)] via in situ polymerization in aqueous solution to obtain a new type of inorganic–organic composite nanostructure. Samples were characterized by using X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared, electron energy loss spectra, high‐resolution transmission electron microscopy, and ultraviolet–visible techniques. Electron energy loss spectra revealed the existence of C?C and C? N bonds in coating layers to prove the encapsulation of PPy or PANi. The red‐shift of absorption band at high‐energy was observed for PPy‐encapsulated composites via ultraviolet–visible spectroscopy, and significant absorption band shifts were also encountered to PANi‐encapsulated composites, which suggest possibilities of band‐gap tuning of such metal oxide‐conducting polymer composites to be applied especially in solar cell devices. However, the sacrifice of nanobelts‐core led to hollow structures of PPy and PANi, which expands the synthetic strategies to prepare conducting polymer nanotubes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2892–2900, 2005