Synthesis,characterization, and micellization of PCL‐g‐PEG copolymers by combination of ROP and “Click” chemistry via “Graft onto” method

Biodegradable and biocompatible PCL‐g‐PEG amphiphilic graft copolymers were prepared by combination of ROP and “click” chemistry via “graft onto” method under mild conditions. First, chloro‐functionalized poly(ε‐caprolactone) (PCL‐Cl) was synthesized by the ring‐opening copolymerization of ε‐caprolactone (CL) and α‐chloro‐ε‐caprolactone (CCL) employing scandium triflate as high‐efficient catalyst with near 100% monomer conversion. Second, the chloro groups of PCL‐Cl were quantitatively converted into azide form by NaN₃. Finally, copper(I)‐catalyzed cycloaddition reaction was carried out between azide‐functionalized PCL (PCL‐N₃) and alkyne‐terminated poly(ethylene glycol) (A‐PEG) to give PCL‐g‐PEG amphiphilic graft copolymers. The composition and the graft architecture of the copolymers were characterized by ¹H NMR, FTIR, and GPC analyses. These amphiphilic graft copolymers could self‐assemble into sphere‐like aggregates in aqueous solution with diverse diameters, which decreased with the increasing of grafting density. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polyiodized‐PCL as multisite transfer agent: Towards an enlarged library of degradable graft copolymers

Poly(ε‐caprolactone)‐based graft copolymers were prepared via a “grafting from” technique derived from iodine transfer polymerization. This copolymerization was done thanks to a poly(ε‐caprolactone‐co‐α‐iodo‐ε‐caprolactone) (PCL‐I), which was used as a multisite transfer agent. Styrene (Sty) and n‐butyl acrylate (n‐BuA) were firstly used as model monomers to establish the feasibility of using PCL‐I as multisite transfer agent, and investigate some general properties of the polymerization. The formation of PCL‐g‐PSty and PCL‐g‐P(n‐BuA) copolymers was confirmed by SEC and NMR analyzes of the copolymers before and after degradation of the PCL backbone. This method was extended to an acrylamide monomer, namely (N,N‐dimethyl) acrylamide (DMA), to prepare original amphiphilic copolymers with PCL as hydrophobic backbone and amido‐functionalized hydrophilic grafted chains. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5006–5016, 2009     

Syntheses and characterization of block copolymers of poly(aliphatic ester) with clickable polyphosphoester

We report a series of biocompatible and biodegradable block copolymers of poly(ε‐caprolactone) with “clickable” polyphosphoester (PPE). The block copolymers are synthesized through controlled ring‐opening polymerization of five‐membered cyclic phosphoester monomer, propargyl ethylene phosphate (PAEP), initiated with poly(ε‐caprolactone) macroinitiator. The polymerization followed first‐order kinetics with living polymerization characteristics, thus the molecular weight and composition of copolymers are tunable by adjusting the feed ratio of PAEP monomer to macroinitiator. Azide‐functionalized poly(ethylene glycol) has been grafted to the copolymer to demonstrate the reactive feasibility by Cu(I)‐catalyzed “click” chemistry of azides and alkynes, generating “brush‐coil” polymers. The mild conditions associated with the click reaction are shown to be compatible with poly(ε‐caprolactone) and PPE backbones, rendering the click reaction a generally useful method for grafting numerous types of functionality onto the block copolymers. The block copolymers also show good biocompatibility to cells, suggesting their suitability for a range of biomaterial applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Carbohydrate‐based amphiphilic diblock copolymers: Synthesis,characterization, and aqueous properties

Amphiphilic poly(ε‐caprolactone)‐b‐poly[(methacrylate‐graft‐poly(ethylene oxide))‐co‐6‐O‐methacryloyl‐D ‐galactopyranose] (PCL‐b‐P(MAPEO‐co‐GaMa)) with various compositions and molecular weights were synthesized via a controlled four‐step strategy. The first step involves the synthesis of functionalized poly(ε‐caprolactone) macroinitiator by ring‐opening polymerization (ROP) of ε‐caprolactone (CL) as initiated by aluminum triisopropoxide (Al(OⁱPr)₃). After selective bromination of the hydroxyl end‐group of the resulting α‐isopropoxy, ω‐hydroxy poly(ε‐caprolactone) by using 2‐bromoisobutyryl bromide, the controlled radical copolymerization of α‐methoxy, ω‐methacrylate poly(ethylene oxide) (MAPEO) with 6‐O‐methacryloyl‐1,2;3,4‐di‐O‐isopropylidene‐D ‐galactopyranose (DIGaMa) was performed by atom transfer radical polymerization (ATRP) in THF at 60 °C using CuBr ligated with 1,1,4,7,10,10 hexamethyltriethylenetetramine (HMTETA) as catalytic complex. In the final step, isopropylidene protective functions were selectively removed using an aqueous formic acid solution leading to the expected amphiphilic graft copolymers. The molecular characterization of those copolymers was performed by ¹H NMR spectroscopy and gel permeation chromatography (GPC) analysis. The self‐assembly of the copolymers into micellar aggregates as well as the related critical micellization concentration (CMC) in aqueous media were determined by dynamic light scattering (DLS) and fluorescence spectroscopy, respectively. In parallel, the morphology of the solid deposits of micellar aggregates was examined with atomic force microscopy (AFM). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3662–3672, 2008     

Amphiphilic PEG‐grafted poly(ester‐carbonate)s: Synthesis and diverse nanostructures in water

Novel biodegradable amphiphilic graft copolymers containing hydrophobic poly(ester‐carbonate) backbone and hydrophilic poly(ethylene glycol) (PEG) side chains were synthesized by a combination of ring‐opening polymerization and “click” chemistry. First, the ring‐opening copolymerization of 5,5‐dibromomethyl trimethylene carbonate (DBTC) and ε‐caprolactone (CL) was performed in the presence of stannous octanoate [Sn(Oct)₂] as catalyst, resulting in poly(DBTC‐co‐CL) with pendant bromo groups. Then the pendant bromo groups were completely converted into azide form, which permitted “click” reaction with alkyne‐terminated PEG by Huisgen 1,3‐dipolar cycloadditions to give amphiphilic biodegradable graft copolymers. The graft copolymers were characterized by proton nuclear magnetic resonance (¹H NMR), Fourier transform infrared spectra and gel permeation chromatography measurements, which confirmed the well‐defined graft architecture. These copolymers could self‐assemble into micelles in aqueous solution. The size and morphologies of the copolymer micelles were measured by transmission electron microscopy and dynamic light scattering, which are influenced by the length of PEG and grafting density. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis of amphiphilic biodegradable glycocopolymers based on poly(ε‐caprolactone) by ring‐opening polymerization and click chemistry

Amphiphilic, biodegradable block glycopolymers based on poly(ε‐caprolactone) (PCL) with various pendent saccharides were synthesized by combination of ring‐opening polymerization (ROP) and “click” chemistry. PCL macroinitiators obtained by ROP of ε‐caprolactone were used to initiate the ROP of 2‐bromo‐ε‐caprolactone (BrCL) to get diblock copolymers, PCL‐b‐PBrCL. Reaction of the block copolymers with sodium azide converted the bromine groups in the PBrCL block to azide groups. In the final step, click chemistry of alkynyl saccharides with the pendent azide groups of PCL‐b‐PBrCL led to the formation of the amphiphilic block glycopolymers. These copolymers were characterized by ¹H NMR spectroscopy and gel permeation chromatography. The self‐assembly behavior of the amphiphilic block copolymers was investigated using transmission electron microscopy and atomic force microscope, spherical aggregates with saccharide groups on the surface were observed, and the aggregates could bind reversibly with Concanavalin A. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3583–3594, 2009     

Synthesis,self‐assembly and recognition properties of biomimetic star‐shaped poly(ε‐caprolactone)‐b‐glycopolymer block copolymers

Biomimetic star‐shaped poly(ε‐caprolactone)‐b‐poly(gluconamidoethyl methacrylate) block copolymers (SPCL‐PGAMA) were synthesized from the atom transfer radical polymerization (ATRP) of unprotected GAMA glycomonomer using a tetra(2‐bromo‐2‐methylpropionyl)‐terminated star‐shaped poly(ε‐caprolactone) (SPCL‐Br) as a macroinitiator in NMP solution at room temperature. The block length of PGAMA glycopolymer within as‐synthesized SPCL‐PGAMA copolymers could be adjusted linearly by controlling the molar ratio of GAMA glycomonomer to SPCL‐Br macroinitiator, and the molecular weight distribution was reasonably narrow. The degree of crystallization of PCL block within copolymers decreased with the increasing block length ratio of outer PGAMA to inner PCL. Moreover, the self‐assembly properties of the SPCL‐PGAMA copolymers were investigated by NMR, UV‐vis, DLS, and TEM, respectively. The self‐assembled glucose‐installed aggregates changed from spherical micelles to worm‐like aggregates, then to vesicles with the decreasing weight fraction of hydrophilic PGAMA block. Furthermore, the biomolecular binding of SPCL‐PGAMA with Concanavalin A (Con A) was studied by means of UV‐vis, fluorescence spectroscopy, and DLS, which demonstrated that these SPCL‐PGAMA copolymers had specific recognition with Con A. Consequently, this will not only provide biomimetic star‐shaped SPCL‐PGAMA block copolymers for targeted drug delivery, but also improve the compatibility and drug release properties of PCL‐based biomaterials for hydrophilic peptide drugs. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 817–829, 2008     

Bottlebrush‐shaped copolymers with cellulose diacetate backbone by a combination of ring opening polymerization and ATRP

Graft copolymers with cellulose diacetate (CDA) backbone and both the poly(ε‐caprolactone) and polystyrene, or poly(butyl acrylate) or PMMA grafts were prepared by two‐step process. First, ε‐caprolactone (CL) was polymerized by ring‐opening polymerization (ROP) initiated with CDA, partly funcionalized with 2‐bromo‐isobutyryl groups (degree of functionalization was 0.5). The p(CDA‐g‐CL) copolymers were used in the second step as polyfunctional macroinitiators of ATRP of the vinyl monomer, giving densely grafted copolymers with polyester and PSt, or PBuA, or PMMA grafts. The prepared copolymers were characterized by SEC, some of them also by FTIR spectroscopy and atomic force microscopy (AFM). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 564–573, 2008     

Y‐shaped diblock copolymer with epoxy‐based block of poly(glycidyl methacrylate): Synthesis,characterization, and its morphology study

A Y‐shaped diblock copolymer with a functional block poly(glycidyl methacrylate) was synthesized via the combination of enzymatic ring‐opening polymerization (eROP) and atom transfer radical polymerization (ATRP). The synthetic procedure involved eROP of ε‐caprolactone (ε‐CL) in the presence of biocatalyst Novozyme 435 and initiator 1H,1H,2H,2H‐perfluoro‐1‐octaoxy, subsequently the resulting poly(ε‐caprolactone) (PCL) was converted to a macroinitiator by esterification of it with 2,2‐dichloro acetyl chloride, and finally the ATRP of glycidyl methacrylate (GMA) was conducted at 60 °C with CuCl/2,2′‐bipyridine as the catalyst system. By this process, we obtained copolymers with a controlled molecular weight and a low polydispersity. The structure and composition of the obtained polymers were characterized by H NMR, GPC, and IR. Linear first‐order kinetics, linearly increased molecular weight with conversion, and low polydispersities were observed for the ATRP of GMA. The thermal properties of the copolymer were characterized by differential scanning calorimetry. The self‐assembly behavior of the Y‐shaped block copolymer was also investigated in different solvents and at different concentrations. The aggregates of various morphologies (spheres, worm‐like patterns, nanowell patterns, and dendritic patterns) were observed. It was found that solvents remarkably influenced the morphologies of the films spin‐coated from the corresponding solutions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5509–5526, 2009     

Novel synthesis of biodegradable linear and star block copolymers based on ε‐caprolactone and lactides using potassium‐based catalyst

Biodegradable, triblock poly(lactide)‐block‐poly(ε‐caprolactone)‐block‐poly(lactide) (PLA‐b‐PCL‐b‐PLA) copolymers and 3‐star‐(PCL‐b‐PLA) block copolymers were synthesized by ring opening polymerization of lactides in the presence of poly(ε‐caprolactone) diol or 3‐star‐poly(ε‐caprolactone) triol as macroinitiator and potassium hexamethyldisilazide as a catalyst. Polymerizations were carried out in toluene at room temperature to yield monomodal polymers of controlled molecular weight. The chemical structure of the copolymers was investigated by ¹H and ¹³C‐NMR. The formation of block copolymers was confirmed by NMR and DSC investigations. The effects of copolymer composition and molecular structure on the physical properties were investigated by GPC and DSC. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5363–5370, 2008     

Fabrication of thermosensitive PCL‐PNIPAAm‐PCL triblock copolymeric micelles for drug delivery

A series of thermosensitive ABA type triblock poly(ε‐caprolactone)‐b‐poly(N‐isopropylacrylamide)‐b‐poly(ε‐caprolactone) (PCL‐PNIPAAm‐PCL) copolymers with different molecular weights were synthesized by the combination of ring opening polymerization and reversible addition‐fragmentation chain transfer (RAFT) polymerization. The critical micelle concentrations (CMCs) of the resulted four triblock copolymers in aqueous solution were determined to be 33.8, 39.8, 35.5, and 41.7 mg/L, respectively, by fluorescence spectroscopy using pyrene as a fluorescence probe. Optical absorption measurements showed that the lower critical solution temperatures (LCSTs) of the copolymers were 35.8, 36.2, 35.2, and 36.2 °C, respectively, in distilled water, and 33.9, 34.2, 33.3, 34.6 °C, respectively, in PBS (pH = 6.8, I = 0.1). Transmission electron microscopy (TEM) showed that the self‐assembled micelles exhibited a well‐defined spherical shape with diameter of around 100 nm. The drug‐loaded PCL‐PNIPAAm‐PCL micelles displayed thermosensitive controlled release behaviors. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3048–3057, 2008     

Complex,degradable polyester materials via ketoxime ether‐based functionalization: Amphiphilic,multifunctional graft copolymers and their resulting solution‐state aggregates

Degradable, amphiphilic graft copolymers of poly(ε‐caprolactone)‐graft‐poly(ethylene oxide), PCL‐g‐PEO, were synthesized via a grafting onto strategy taking advantage of the ketones presented along the backbone of the statistical copolymer poly(ε‐caprolactone)‐co‐(2‐oxepane‐1,5‐dione), (PCL‐co‐OPD). Through the formation of stable ketoxime ether linkages, 3 kDa PEO grafts and p‐methoxybenzyl side chains were incorporated onto the polyester backbone with a high degree of fidelity and efficiency, as verified by NMR spectroscopies and GPC analysis (90% grafting efficiency in some cases). The resulting block graft copolymers displayed significant thermal differences, specifically a depression in the observed melting transition temperature, T_m, in comparison with the parent PCL and PEO polymers. These amphiphilic block graft copolymers undergo self‐assembly in aqueous solution with the P(CL‐co‐OPD‐co‐(OPD‐g‐PEO)) polymer forming spherical micelles and a P(CL‐co‐OPD‐co‐(OPD‐g‐PEO)‐co‐(OPD‐g‐pMeOBn)) forming cylindrical or rod‐like micelles, as observed by transmission electron microscopy and atomic force microscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3553–3563, 2010     

Synthesis and solution properties of well‐defined comb‐on‐comb graft polymers

Well‐defined comb‐on‐comb copolymers of styrene, isoprene, and α‐methyl‐styrene are prepared through cascade “grafting‐onto” methods. The polymer main chain is prepared by nitroxide‐mediated radical polymerization while the branches are prepared by anionic polymerization. The “grafting‐onto” approach employs the coupling chemistry of macromolecular anions, such as polystyryllithium, polyisoprenyllithium, or poly(α‐methylstyryl)lithium, toward either benzyl chloride or epoxy ring on precursor backbones. Thus a series of ABA‐, ABB‐, and ABC‐type comb‐on‐comb copolymers are prepared and characterized by gel permeation chromatography equipped with a multi‐angle laser light scattering detector and a viscometer. Unusual “U‐shaped” dependences of radius of gyration, R_g, on molecular weight are observed for comb‐on‐comb products, which are attributable to delayed elution of the densely grafted copolymers from GPC columns. The result also shows that the comb‐on‐comb copolymers exhibit morphologies from hard sphere to cylindrical rod, depending on the length ratio of the main chain to the branches. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5518–5527, 2008     

Brønsted acid‐catalyzed polymerization of ε‐caprolactone in water: A mild and straightforward route to poly(ε‐caprolactone)‐graft‐water‐soluble polysaccharides

The polymerization of ε‐caprolactone (ε‐CL) has been assessed in water using various Brønsted acids as catalysts. The reaction was found to be quantitative at 100 °C, leading to number–average molecular weights up to 5000 g mol^?1. The Brønsted acid‐catalyzed polymerization of ε‐CL in water was further conducted in the presence of water‐soluble polysaccharides thereby affording graft copolymers. The approach enables an easy, mild access to dextran hydroxyesters. For low degree of substitution, the latter self‐assembles in water to form nanoparticles. Poly(ε‐CL)‐graft‐methylcellulose copolymers can also be obtained via a similar approach. It is noteworthy that the methodology reported herein is a one‐step route to poly(ε‐CL)‐graft‐water‐soluble polysaccharides, operating in mild conditions, that is, at low temperatures, using readily available metal‐free catalysts and water as a solvent. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2139–2145     

Synthesis of amphiphilic A3B mikto‐arm copolymers from a sugar core: Combination of hydrophobic PCL and hydrophilic glycopolymers for biocompatible nanovector preparation

Amphiphilic A₃B mikto‐arm copolymers have been synthesized using a t‐butyl‐diphenyl silyl‐based methylglucoside derivative. The latter has been first used as initiator for the polymerization of ε‐caprolactone leading to three‐arm star‐shaped structures followed by several postpolymerization steps to obtain star‐shaped poly(ε‐caprolactone) macroinitiator. Atom transfer radical polymerization (ATRP) of diisopropylidene galactose methacrylate in THF at 60 °C using CuBr ligated with 1,1,4,7,10,10‐hexamethyltriethylenetetramine (HMTETA) as catalytic complex allowed the formation of A₃B mikto‐arm copolymers with different compositions and molecular weights. Selective deprotection of sugar protecting groups finally generated amphiphilic mikto‐arm copolymers. The molecular characterization of those copolymers was performed by ¹H NMR spectroscopy and gel permeation chromatography (GPC) analysis. The self‐assembly of the copolymers into micellar aggregates and the related critical micellization concentration (CMC) in aqueous media were determined by dynamic light scattering (DLS) and UV‐visible spectroscopy, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3271–3280, 2010     

Synthesis and characterization of highly fluorescent polythiophene derivatives containing polystyrene sidearms

In this study, macroinitiators with different content of atom‐transfer radical polymerization (ATRP) functional group on polythiophene backbone were first prepared by the copolymerization of 3‐[1‐ethyl‐2‐(2‐bromopropionate)]thiophene and 3‐hexylthiophene with various feed ratio. Then poly [3‐hexyl‐2,5‐thienylene‐co‐3‐[1‐ ethyl‐2‐(2‐[poly(styrene)]propionate)]‐2,5‐thienylene] (PTTBr‐PS) with different graft density were obtained by ATRP of styrene from these macroinitiators in anisole. The degree of polymerization of PS sidearm (DP_PS) was controlled by polymerization time. The structures of obtained graft copolymers were characterized by gel permeation chromatography (GPC), nuclear magnetic resonance (¹H NMR) and differential scanning calorimetry (DSC). Introduction of the PS sidearms onto the backbone of polythiophene was an attempt to trap the polythiophene backbone in a “solution‐like” conformation, thus inhibit the packing of polythiophene backbone and result in the improvement of fluorescent property in solid state. This was verified by the UV–vis and fluorescence analyses. Besides, it was also found that the optical property of PTTBr‐PS graft copolymer was dominated by its graft density and independent on the degree of polymerization of its PS sidearm. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1003–1013, 2008     

Synthesis,characterization, and properties of amphiphilic chitosan copolymers with mixed side chains by click chemistry

Novel amphiphilic chitosan copolymers with mixed side chains of poly(ε‐caprolactone) and poly(ethylene oxide) (CS‐g‐PCL/PEO) were successfully synthesized by “graft to” approach via click chemistry. The melting and crystallization behaviors and crystalline morphology of CS‐g‐PCL/PEO copolymers can be adjusted by the alteration of the feed ratio of PCL and PEO segments. CS‐g‐PCL/PEO copolymers revealed crystalline morphology different from that of linear alkynyl PCL and alkynyl PEO due to the influence of brush structure of copolymers and the mutual influence of PCL and PEO segments. The hydrophilicity of the CS copolymers can be improved and adjusted by the alteration of the composition of PCL and PEO segments. Moreover, the CS copolymers can self‐assemble into spherical micelles in aqueous solution. Investigation shows that the size of the CS copolymer micelles increased with the increase of the content of hydrophobic PCL segments in copolymers, which indicated that the micellar behavior of the copolymers can be controlled by the adjustment of the ratio of PCL and PEO segments in copolymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3476–3486, 2010     

Noncovalently connected micelles based on a β‐cyclodextrin‐containing polymer and adamantane end‐capped poly(ε‐caprolactone) via host–guest interactions

New random copolymers, poly(N‐vinyl‐2‐pyrrolidone‐co‐mono‐6‐deoxy‐6‐methacrylate ethylamino‐β‐cyclodextrin) (PnvpCD) bearing pendent β‐cyclodextrin (CD) groups were synthesized. PnvpCD formed soluble graft‐like polymer complex with adamantane (AD) end‐capped poly(ε‐caprolactone) (PclAD) in their common solvent N‐methyl‐2‐pyrrolidone driven by the inclusion interactions between the CD and AD groups. The formation of the graft complex has been confirmed by viscometry, dynamic light scattering (DLS), and isothermal titration calorimeter. The graft complex self‐assembled further into noncovalently connected micelles in water, which is a selective solvent for the main chain PnvpCD. Transmission electron microscopy, DLS, and atomic force microscopy have been used to investigate the structure and morphology of the resultant micelles. A unique “multicore” structure of the micelles, in which small PclAD domains scattered within the micelles, was obtained under nonequilibrium conditions in the preparation. However, the micelles prepared in a condition close to equilibrium possess an ordinary core‐shell structure. In both cases, the core and shell are believed to be connected by the AD‐CD inclusion complexation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4267–4278, 2009     

Block and random copolymerization of ε‐caprolactone,L‐, and rac‐lactide using titanium complex derived from aminodiol ligand

A series of di‐ and triblock copolymers [poly(L ‐lactide‐b‐ε‐caprolactone), poly(D,L ‐lactide‐b‐ε‐caprolactone), poly(ε‐caprolactone‐b‐L ‐lactide), and poly(ε‐caprolactone‐b‐L ‐lactide‐b‐ε‐caprolactone)] have been synthesized successfully by sequential ring‐opening polymerization of ε‐caprolactone (ε‐CL) and lactide (LA) either by initiating PCL block growth with living PLA chain end or vice versa using titanium complexes supported by aminodiol ligands as initiators. Poly(trimethylene carbonate‐b‐ε‐caprolactone) was also prepared. A series of random copolymers with different comonomer composition were also synthesized in solution and bulk of ε‐CL and D,L ‐lactide. The chemical composition and microstructure of the copolymers suggest a random distribution with short average sequence length of both the LA and ε‐CL. Transesterification reactions played a key role in the redistribution of monomer sequence and the chain microstructures. Differential scanning calorimetry analysis of the copolymer also evidenced the random structure of the copolymer with a unique T_g. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Morphology of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) assemblies in diluted aqueous solution and gel studied by atomic force microscopy

Morphologies of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) (PCL‐PEG‐PCL) triblock copolymer self‐assemblies in the diluted solution and in gel were studied by atomic force microscopy (AFM). The copolymer self‐assembled into wormlike aggregates, of uniform diameter, in water. The wormlike aggregates arranged in order to form separate clusters in the diluted copolymer solution; at a higher copolymer concentration, the clusters became bigger and bigger, and packed together to form gel. Copyright © 2008 John Wiley & Sons, Ltd.