Synthesis of soluble electron‐donating polymers containing vinylogous TTF by oxidative dimerization of 1,4‐bisdithiafulvenyl‐2,5‐dialkoxybenzene

A new electron‐donating polymer composed of a vinylogous tetrathiafulvalene (TTF) unit was prepared by the oxidative dimerization of 1,4‐bisdithiafulvenyl‐2,5‐didodecyloxybenzene using iodine. The polymer was soluble in common organic solvents such as CHCl₃ and toluene. The number‐average molecular weight of the polymer with dodecyloxy group was 24,900 determined from GPC. The UV–vis spectrum of the polymer showed the absorption maxima at 587, 712, and 803 nm, which are due to a cation radical of the vinylogous TTF unit in the polymer. The reduction of the polymer to its neutral state was performed using sodium hydrogen sulfite. The structure of the polymer was confirmed by ¹H NMR and UV–vis spectra compared with that of a dimer model compound prepared by oxidation of 1‐dithiafulvenyl‐2,5‐didodecyloxybenzene using iodine. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4600–4608, 2005     

Optical properties of a novel fluorene‐based thermally stable conjugated polymer containing pyridine and unsymmetric carbazole groups

A new diiodo monomer containing heterocyclic pyridine and carbazole groups was synthesized via Chichibabin reaction and used in the preparation of a conjugated polymer via Suzuki coupling approach. The conjugated polymer was highly soluble in common organic solvents such as NMP, THF, dichloromethane, chloroform, toluene, xylene, and benzene at room temperature. The polymer had high glass transition temperature at 191 °C and T_d10 at 434 °C in nitrogen atmosphere. The pristine polymer exhibited the UV–vis maximum absorption at 355 nm and shifted to 420 nm after protonation. The emission of the polymer in THF solution changed from the blue region with maximum peak at 400 nm to the yellow region with maximum peak at 540 nm after protonated by HCl, and the intensity of emission depended on the concentration of acid. The polymer also showed electrochromic behavior under applied voltage. The emission color of the polymer film changed from blue (435 nm) to yellow (570 nm) when 2.5 V bias voltage was applied. The polymer also exhibited write‐once and read‐many‐times (WORM) polymer memory effect with tristable states. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 991–1002, 2009     

Regioregular poly[3‐(4‐alkoxyphenyl)thiophene]s

An easy synthetic procedure for soluble poly[3‐(4‐alcoxyphenyl)thiophene]s is reported. The polymers present a high regioregularity degree as determined by both UV–vis spectra and ¹H and ¹³C NMR analysis. Furthermore, X‐ray powder diffraction analysis performed on films of the polymers suggests a π‐stacked packing structure of the macromolecules. Electrical characterization was performed on one of the synthesized polythiophenes on both undoped and doped (with FeCl₃ or iodine) films. The conductivity and charge‐carrier mobility were assessed by current–voltage and field effect measurements. Well‐structured polymer films were obtained simply via spin coating from chloroform solutions and without the need of further processing, unlike other regioregular polythiophenes reported in the literature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1758–1770, 2007     

Alternating π‐conjugated copolymer of dithiafulvene with 2,2′‐bipyridyl units

A π‐conjugated polymer containing a dithiafulvene unit and a bipyridyl unit was prepared by cycloaddition polymerization of aldothioketene derived from 5,5′‐diethynyl‐2,2′‐bipyridine. Ultraviolet–visible (UV–vis) absorption spectra showed that the π‐conjugation system of the polymer expanded more effectively than that of a benzene analogue of poly(dithiafulvene) obtained from 1,4‐diethynylbenzene. Cyclic voltammetry measurements indicated that the dithiafulvene–bipyridyl polymer was a weaker electron‐donor polymer than the benzene analogue. These results supported the idea that the incorporation of the electron‐accepting bipyridyl moiety into conjugated poly(dithiafulvene) induced an intramolecular charge‐transfer (CT) effect between the units. Treatment of the dithiafulvene–bipyridyl polymer with bis(2,2′‐bipyridyl)dichlororuthenium (II) [Ru(bpy)₂Cl₂] afforded a ruthenium–polymer complex. A cyclic voltammogram of the complex showed broad redox peaks, which indicated electronic interaction between the dithiafulvene and tris(bipyridyl) ruthenium complex. The dithiafulvene–bipyridyl polymer formed CT complexes with 7,7,8,8‐tetracycanoquinodimethane (TCNQ) in dimethyl sulfoxide. The UV–vis absorption indicated that the resulting CT complex contained anion radical of TCNQ and partially charge‐transferred TCNQ. The polymer showed an unusually high electrical conductivity of 3.1 × 10^?4 S/cm in its nondoped state due to the effective donor–acceptor interaction between the bipyridine unit and the dithiafulvene unit. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4083–4090, 2001     

4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophen‐4‐one (CPDTO) homopolymer with side chains on every other CPDTO

A soluble 4H‐cyclopenta[2,1‐b ;3,4‐b ′]dithiophene‐4‐one (CPDTO)‐based polymer (C₆‐PCPDTO) has been synthesized from two monomers derived from nonalkylated CPDTO and didodecyl CPDTO (C₁₂‐CPDTO). Proton NMR, thermal analysis, UV–vis absorption, cyclic voltammetry, and XRD are used to characterize the polymer in solution and film. The new polymer has an optical bandgap of 1.28 eV in film, and has strong interchain interaction in chloroform solutions. The polymer contains a significant amount of homocoupled segments. The regular segments and homocoupled CPDTO segments render the polymer highly aggregating in solution. The non‐planar homocoupled C₁₂‐CPDTO segments prevent the polymer from forming regular π‐stacks, resulting in a low SCLC hole mobility (3.88 × 10^?7 cm²V^?1s^?1). CV experiments show that C₆‐PCPDTO is stable in its oxidized and reduced states. Solar cell devices were fabricated from C₆‐PCPDTO2 :PC₆₀BM blends of different weight ratios. High PC₆₀BM loading (80% or greater) was required for the devices to show measurable efficiency, indicating that the limited π‐stacking of the polymer is not sufficient to cause effective phase separation. Further development of synthetic method is still needed to eliminate structural defects so that long‐range ordered pi‐stacking can be realized in the polymer for these applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1077–1085     

A comparison of the properties of two structurally equivalent but regiochemically different mono‐alkylated polybithiophenes prepared through AABB‐type stille polycondensation

Previous routes to polymers with mono‐alkylated bithiophenes have proceeded through polymerization of monoalkyl‐2,2′‐bithiophene monomers through oxidative or AB‐type cross‐coupling polymerizations. The resulting polymer regiochemistry affects both the location and orientation of the polymer side‐chains. In contrast, AABB‐type cross‐coupling polymerizations can control the location and in some cases the orientation of the side‐chains. To study how this control can impact polymer properties, two poly(monodecyl‐2,2′‐bithiophene) polymers have been synthesized through Stille AABB‐type polycondensations of 2,5‐bis(trimethylstannyl)thiophene with different monomers. The alkyl side‐chains are located on every other thiophene, but polymer 1 consists of both head‐to‐tail and head‐to‐head dyads, whereas polymer 2 is made up of only head‐to‐head dyads. ¹H NMR, ¹³C NMR, and heteronuclear single quantum correlation spectroscopy are used to confirm and contrast the polymer regiochemistries. The physical properties of the two polymers are analyzed using UV–vis spectroscopy, differential scanning calorimetry, and grazing‐incidence X‐ray diffraction. Polymer 2 is found to display significantly more aggregation in solution than 1, and it displays different thermal properties. The film properties of polymers 1 and 2, however, are very similar, with nearly identical UV–vis profiles and d‐spacing values as determined by grazing incidence X‐ray diffraction. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Preparation of a new polymer containing photoluminescent pyrazoline unit in the main chain

A novel photoluminescent polymer (PPyne) containing a 2‐pyrazoline unit in the molecular main chain was prepared (for the first time) by polycondensation between a 2‐pyrazoline monomer [an adduct of 2,6‐bis(4‐bromobenzylidene)cyclohexanone with phenylhydrazine] and 2,5‐dihexyloxy‐p‐phenylene diboric ester in the presence of Pd(PPh₃)₄. PPyne had a number‐average molecular weight of 7800 and a polydispersity index of 1.99 and showed good solubility in common organic solvents. In toluene PPyne exhibited an intrinsic viscosity [η] of 0.42 dL g^?1 at 30 °C. The polymer was photoluminescent (PL) in both the chloroform solution and the solid state; the quantum yield of PL in the solution was 40%. In the two states, PPyne gave the same ultraviolet–visible (UV–vis) peak at 368 nm and the same PL peak at 512 nm. DSC traces indicated that PPyne had a melting temperature of 168 °C, and thermogravimetric analysis revealed that the polymer had good thermal stability with a 5 wt % loss temperature of 376 °C under N₂. Electrochemical oxidation of PPyne started at about 0.5 V versus Ag/AgNO₃ and gave a peak at 0.98 V versus Ag/AgNO₃ with a color change of the film from yellow to black green. The color change was followed by UV–vis spectroscopy. The corresponding reduction peak appeared at 0.80 V versus Ag/AgNO₃. Treatment of PPyne with HCl led to dehydrogenating transformation of the polymer to a new cross‐conjugated polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2686–2697, 2004     

Triplet‐sensitized irradiation of a main‐chain liquid crystalline poly(aryl cinnamate) in three different phases

Visible light irradiation of thin films of a main‐chain liquid crystalline poly(aryl cinnamate) using ketocoumarins as triplet sensitizers leads to photochemical crosslinking and UV‐vis and FTIR spectroscopic changes associated with saturation of the cinnamate double bond, most likely by 2 + 2 photocycloaddition. The triplet sensitizers are themselves photolabile and are lost by photochemical reactions during the sensitization process. A new ketocoumarin sensitizer with decyloxy substituents and a reduced tendency to phase separate from the polymer is reported. A simple calculation of the sensitization stoichiometry shows that a single molecule of this ketocoumarin sensitizes the destruction of approximately 90 cinnamate chromophores in the “as cast” films below T_g and about 300 chromophores in the more‐ordered glassy nematic films and in “as cast” films of poly(vinyl cinnamate). Triplet sensitization of fluid nematic films leads, upon initial irradiation, to UV‐vis hyperchromism that is attributed to disruption of chromophore aggregation and, possibly, to disruption of the nematic mesophase as photoproducts begin to form. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 134–144, 2001     

Investigation on thermoresponsive behavior of biodegradable poly(γ‐glutamic acid)‐graft‐L‐phenylalanine ethyl ester

The thermosensitivity of biodegradable and non‐toxic amphiphilic polymer derived from a naturally occurring polypeptide and a derivative of amino acid was first reported. The amphiphilic polymer consisted of poly(γ‐glutamic acid) (γ‐PGA) as a hydrophilic backbone, and L ‐phenylalanine ethyl ester (L ‐PAE) as a hydrophobic branch. Poly(γ‐glutamic acid)‐graft‐L ‐phenylalanine (γ‐PGA‐graft‐L ‐PAE) with grafting degrees of 7–49% were prepared by varying the content of a water‐soluble carbodiimide (WSC). γ‐PGA‐graft‐L ‐PAE with a grafting degree of 49% exhibited thermoresponsive phase transition behavior in an aqueous solution at around 80°C. The copolymers with grafting degrees in the range of 30–49% showed thermoresponsive properties in NaCl solution. A clouding temperature (T_cloud) could be adjusted by changing the polymer concentration and/or NaCl concentration. The thermoresponsive behavior was reversible. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

1,4‐Diiodobenzene with –COO–TEMPO (TEMPO = 2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐4‐yl) substituents at 2,5‐positions: synthesis and use as a monomer for new π‐conjugated polymers having nitroxyl radicals in side chains

The reaction of 2,5‐diiodo‐1,4‐benzenedicarbonyl chloride, C₆H₂I₂(COCl)₂‐p, with 4‐hydroxy‐2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO‐ol) gave I–Ph(COO–TEMPO)₂–I, Monomer‐1. Pd‐catalyzed polycondensation of Monomer‐1 with Me₃Sn‐Th‐SnMe₃ (2,5‐bis(trimethylstannyl)thiophene) and Bu₃Sn–CH = CH–SnBu₃ (1,2‐bis‐(tributylstannyl)ethylene) gave the corresponding π‐conjugated polymers, Polymer‐1 and Polymer‐2, respectively. Monomer‐1 was converted to a diethynyl compound, H–C ≡ C–Ph(COO–TEMPO)₂–C ≡ C–H (Monomer‐1'), and Pd‐catalyzed polycondensation between Monomer‐1 and Monomer‐1' gave a π‐conjugated poly(arylene ethynylene) type polymer, Polymer‐3. According to the expansion of the π‐conjugation system by the polymerization, the UV–vis peaks of Monomer‐1 (λ_max = 323 nm) and Monomer‐1' (327 nm) are shifted to longer wavelengths (λ_max = 365 nm, 385 nm, and 396 nm for Polymer‐1, Polymer‐2, and Polymer‐3, respectively). Polymer‐1–Polymer‐3 showed ESR signals at about g = 2.01 with reasonable intensities. They are electrochemically active and showed a peak current anodic (oxidation) peak at about 0.9 V versus Ag/AgCl, which is reasonable for TEMPO polymers. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and characterization of new π‐conjugated polymers containing 1,8‐naphthyridine in the main chain: Role of the 1,8‐naphthyridine unit in π‐conjugated polymers

Alternating π‐conjugated copolymers of 1,8‐naphthyridine‐2,6‐diyl ( 1,8‐Nap ) with 9,9‐dioctylfluorene‐2,7‐diyl ( P(Flu‐Ph‐1,8‐Nap) ) and 2,5‐didodecyloxy‐1,4‐phenylene ( P(ROPh‐Ph‐1,8‐Nap) ) have been synthesized by Pd‐catalyzed organometallic polycondensation. The copolymers showed UV‐vis absorption peaks at around 390 nm in o‐dichlorobenzene. The polymers were photoluminescent both in o‐dichlorobenzene and in the solid state. In o‐dichlorobenzene, the emission peaks of P(Flu‐Ph‐1,8‐Nap) and P(ROPh‐Ph‐1.,8‐Nap) appeared at λ_EM = 440 and 471 nm, with quantum yields of 87% and 66%, respectively. Electrochemical data revealed that 1,8‐Nap behaved as a typical electron‐accepting unit. When P(Flu‐Ph‐1,8‐Nap) was treated with 10‐camphorsulfonic acid, the emission peak shifted to λ_EM = 598 nm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Coordination of nickel and copper dithiolate to 2,2′‐bipyridine‐based π‐conjugated polymers

π‐Conjugated polymers (Poly1–Poly3) containing a 2,2′‐bipyridine (bpy) unit were subjected to coordination to nickel and copper dithiolate for the purpose of manipulating the photophysical properties. The absorption maximum peak of Poly1 [maximum wavelength (λ_max) = 446 nm] redshifted by 36 nm upon the coordination of bpy to NiCl₂, which produced Poly1–NiCl₂. A further bathochromic shift was observed in the spectrum of Poly1–mntNi [mntNi = (maleonitrile dithiolate)nickel; λ_max = 499 nm] bearing the dithiolate ligand, which stemmed from the extension of the conjugated system over the nickel dithiolate moiety through the bpy unit. An increase in the [Ni]/[bpy] ratio in Poly1–mntNi rendered the original maximum peak at 446 nm smaller and the lower energy charge‐transfer peak at 499 nm larger; the isosbestic points remained at 380 and 475 nm. The green fluorescence (λ_max = 504 nm) emitted from Poly1 markedly diminished upon the coordination of nickel dithiolate because of the effective energy transfer. The absorption maximum peak of Poly1–mntNi in chloroform at 499 nm blueshifted to 471 nm when the volume ratio of the chloroform/N,N‐dimethylformamide solvent reached 10:90. The coordination of nickel dithiolate to Poly2 and Poly3 also brought about redshifts of the absorption maximum peaks of as much as 55 and 61 nm, respectively. The absorption maximum peak of Poly1–(phenyldithiolate)nickel(pdtNi) (λ_max = 474 nm) redshifted by 28 nm in comparison with that of Poly1, whereas the magnitude of the shift of Poly1–bis(thiophenoxide)nickel(btpNi) bearing two thiophenoxide ligands was 20 nm. Poly1–mntCu with a tetrahedral copper center was also investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2631–2639, 2004     

Green‐emitting poly[(1,3‐phenylenevinylene)‐alt‐ (1,4‐phenylenevinylene)]s: Effect of the substitution patterns on the optical properties

Green‐emitting substituted poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)]s ( 6 ) were synthesized via the Wittig–Horner reaction. The polymers were yellow resins with molecular weights of 10,600. The ultraviolet–visible (UV–vis) absorption of 6 (λ_max = 332 or 415 nm) was about 30 nm redshifted from that of poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(1,4‐phenylenevinylene)] ( 2 ) but was only 5 nm redshifted with respect to that of poly[(1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)] ( 1 ). A comparison of the optical properties of 1 , 2 , and 6 showed that substitution on m‐ or p‐phenylene could slightly affect their energy gap and luminescence efficiency, thereby fine‐tuning the optical properties of the poly[(m‐phenylene vinylene)‐alt‐(p‐phenylene vinylene)] materials. The vibronic structures were assigned with the aid of low‐temperature UV–vis and fluorescence spectroscopy. Light‐emitting‐diode devices with 6 produced a green electroluminescence output (emission λ_max ～ 533 nm) with an external quantum efficiency of 0.32%. Substitution at m‐phenylene appeared to be effective in perturbing the charge‐injection process in LED devices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1820–1829, 2004     

Synthesis of stable “gold nanoparticle–polymeric micelle” conjugates: A new class of star “molecular chimera” that self‐assemble into linear arrays of spherical micelles

Stable and aggregation‐free “gold nanoparticle–polymeric micelle” conjugates were prepared using a new and simple protocol enabled by the hydrogen bonding between surface‐capping ligands and polymeric micelles. Individual gold nanoparticles were initially capped using a phosphatidylthio–ethanol lipid and further conjugated with a star poly(styrene‐block‐glutamic acid) copolymer micelle using a one‐pot preparation method. The morphology and stability of these gold–polymer conjugates were characterized using transmission electron microscopy (TEM) and UV–vis spectroscopy. The self‐assembly of this class of polymer‐b‐polypeptide in aqueous an medium to form spherical micelles and further their intermicelle reorganization to form necklace‐like chains was also investigated. TEM and laser light scattering techniques were employed to study the morphology and size of these micelles. Polymeric micelles were formed with diameters in the range of 65–75 nm, and supermicellular patterns were observed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3570–3579, 2007     

Influence of the bulkiness of the substituent on the aggregation and magnetic properties of poly(3‐alkylthiophene)s

A series of poly(3‐alkylthiophene)s (P3ATs) ( P1–P5 ) has been synthesized via a Ni(dppp)‐mediated polymerization, varying the bulkiness of the alkyl side chains in order to investigate the influence of the bulkiness of the alkyl substituent on the aggregation and magnetic properties of P3ATs. UV–Vis spectroscopy, performed in solution as well as in film, shows that the stacking of the polymers becomes more complicated as the bulkiness of the side chains increases. Both the π‐interactions and the planarization of the polymer chains are diminished. While aggregation is absent in poor solvent for the polymer with the most bulky side chains, aggregation was present in film, albeit slowed down. This behavior was also confirmed by X‐ray diffraction (XRD) and differential scanning calorimetry (DSC) experiments. Electron spin resonance (ESR) measurements, performed at 300 K on powders, confirmed the trend of decreasing supramolecular order with increasing bulkiness of the side‐chain. Magnetization measurements, performed at 5 and 300 K, are in line with our hypothesis on the influence of π‐interactions and the fraction of planar polymer chains on the coercivity and saturation magnetization, respectively. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 76–86     

Synthesis and characterization of a novel AlQ3‐containing polymer

In this article, the synthesis of a tris(8‐hydroxyquinoline)aluminum (AlQ₃)‐containing poly(arylene ether) (4) is reported. The presence of AlQ₃ pendants in polymer 4 is confirmed by NMR, ultraviolet–visible, photoluminescence, and gel permeation chromatography analyses. This is the first report of the attachment of AlQ₃ complexes as side chains to a polymer. Polymer 4 has a glass‐transition temperature of 217.8 °C and is thermally stable with a 5% weight‐loss temperature greater than 500 °C under nitrogen, as determined by differential scanning calorimetry and thermogravimetric analyses, respectively. Polymer 4 is quite soluble in common organic solvents, such as tetrahydrofuran, N,N‐dimethylacetamide, and CHCl₃. A composite that is 80 wt % polymer 4 and 20 wt % AlQ₃ forms a transparent and tough film when cast from its chloroform solution. The application of this AlQ₃‐containing polymer in light‐emitting diodes is under investigation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2887–2892, 2000     

Synthesis and characterization of novel nano size electroactive poly 4,4′‐diaminodiphenyl sulphone

The modification of electrodeposited polyaniline film by subsequent electrodeposition of 4,4′‐diaminodiphenyl sulfone (DDS) leads to a new material having nanostructure. The coated polymer films were treated with various pH solutions. The film adherent characteristics and surface morphology were studied using SEM. The electrochemically synthesized polyDDS revealed good redox behavior. The DDS was also polymerized by the chemical oxidation method using potassium persulphate. The polymer was characterized by UV‐Vis and FTIR spectral studies. The formation of polymer through the N? H group was understood from the single N? H stretching vibrational frequency at 3459 cm^?1. The X‐ray diffraction studies revealed the formation of nano sized (28 nm) crystalline polymer. The conductivity of the polymer was determined to be 1.07 × 10^?4 S.cm^?1. The solubility of the chemically polymerized powder was ascertained, and polyDDS showed good solubility in DMF and DMSO. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1702–1707, 2005     

Poly[2,7‐(9,9‐dihexylfluorene)‐alt‐pyridine] with donor‐acceptor architectures: A new series of blue‐light‐emitting alternating copolymers

A novel series of well‐defined alternating poly[2,7‐(9,9‐dihexylfluorenyl)‐alt‐pyridinyl] (PDHFP) with donor‐acceptor repeat units were synthesized using palladium (0)‐catalyzed Suzuki cross‐coupling reactions in good to high yields. In this series of alternating polymers, 2, 7‐(9,9‐dihexylfluorenyl) was used as the light emitting unit, and the electron deficient pyridinyl unit was employed to provide improved electron transportation. These polymers were characterized by ¹H‐NMR and ¹³C‐NMR, gel permeation chromatography (GPC), thermal analyses, and UV‐vis and fluorescence spectroscopy. The glass transition temperature of copolymers in nitrogen ranged from 110 to 148 °C, and the copolymers showed high thermal stabilities with high decomposition temperatures in the range of 350 to 390 °C in air. The difference in linkage position of pyridinyl unit in the polymer backbone has significant effects on the electronic and optical properties of polymers in solution and in film phases. Meta‐linkage (3,5‐ and 2,6‐linkage) of pyridinyl units in the polymer backbone is more favorable to polymer for pure blue emission and prevention of aggregation of polymer chain than para‐linkage (2,5‐linkage) of the pyridinyl units. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4792–4801, 2004     

Synthesis and characterization of novel poly(p‐phenylenevinylene) derivatives containing phenothiazine‐5‐oxide and phenothiazine‐5, 5‐dioxide moieties

PPV‐based copolymers containing phenothiazine‐5‐oxide and phenothiazine‐5, 5‐dioxide moieties have been successfully synthesized by Wittig‐Horner reaction and characterized by means of UV‐vis, photoluminescence, electroluminescence spectra, and cyclic voltammetry. All of these copolymers can be dissolved in common organic solvents such as chloroform, tetrahydrofuran, and toluene. The PL maxima in the film state are located at 582, 556, and 552 nm for P1, P2, and P3, respectively. The HOMO and LUMO levels of P2 are found to be ?5.21 and ?2.68 eV, respectively; whereas those of P3 are found to be ?5.26 and ?2.71 eV, respectively. The cyclic voltammetry result indicates that the conversion of electron‐donating sulfide to electron‐withdrawing sulfoxide or sulfone group in polymers plays a dominating role in increasing its oxidation potential. Yellowish‐green light ranging from 568 to 540 nm was observed for the single layer device with the configuration of ITO/Polymer/Ca/Al. Double layer devices with Zn (BTZ)₂ as a hole blocking layer exhibited enhanced EL performance compared to the single layer devices. The maximum brightness of the double layer devices of P1, P2, and P3 is 278, 400, and 796 cd/m², respectively. The results of EL and electrochemical analyses revealed that they are promising candidate materials for organic, light‐emitting diodes with hole‐transporting ability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4291–4299, 2007     

The Pt‐Organometallic Version of Perigraniline: Going Blue

Four conjugated push–pull organometallic polymers ( [Pt]‐AQ )_n ( [Pt] = trans‐bis(phenylacetylene)bis(tributylphosphine)platinum(II); AQ = 2‐bromo‐, 2,6‐dibromo‐, 2,6‐diamino‐, and unsubstituted anthraquinone diimine) were prepared and characterized by UV–vis spectroscopy and electrochemistry. A low‐energy charge transfer, CT, band ( [Pt] *→ AQ ; confirmed by density functional theory calculations), was found in the 445–500 nm window rather than the expected red‐shifted range above 630 nm. X‐ray structures of four model compounds reveal that steric hindrance induces large dihedral angles between the C₆H₄ and NCC₂ planes, rendering π‐orbital overlap difficult between the [Pt] and AQ units. The position of the CT band is mainly driven the reduction potential of the anthraquinone diimine unit.