Synthesis and characterization of main‐chain NLO oligomers and polymer that contain 4‐dialkylamino‐ 4′‐(alkylsulfonyl)azobenzene chromophores

An ω‐amino carboxylic acid monomer that contained a nonlinear optical (NLO) chromophore was prepared by a convergent synthesis. Strategies for selective protection/deprotection of the amino and carboxylic acid functionalities were developed. The protected monomer, 4‐[N‐(4‐benzyloxycarbonyl)butyl‐N‐methylamino]‐4′‐[2″,5″‐bis(decyloxy)‐4″‐(phthalimidomethyl)benzylsulfonyl]azobenzene, could be deprotected selectively or sequentially to give HOOC‐monomer‐N‐phthaloyl, benzyl‐OOC‐monomer‐NH₂, or HOOC‐monomer‐NH₂. Sequential synthesis was performed to yield main‐chain NLO dimers and tetramers. This was accomplished by selective deprotection and dicyclohexylcarbodiimide coupling. The HOOC‐monomer‐NH₂ was polymerized by treatment with diphenylphosphoryl azide to give a main‐chain NLO polyamide. The monomer, dimer, tetramer, and polymer NLO materials were characterized by ¹H, ¹³C, IR, and UV–visible spectroscopy as well as by gel permeation chromatography, differential scanning calorimetry, and elemental analysis. The NLO properties of these materials were measured. Thin films of the oligomers and polymer were prepared by spin casting on indium‐tin oxide coated glass. The second‐order NLO properties of the oligomers and polymer thin films were studied by in situ corona poling/second‐harmonic generation and attenuated total reflection methods. The optimal poling temperatures were significantly lower than the melting temperatures or glass‐transition temperatures of the oligomers and polymer. The poling efficiency increased in the following order: monomer, oligomers, and polymer. An electro‐optic coefficient of 4 pm/V at 1.06 μm was obtained for the polymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 546–559, 2000     

Synthesis and properties of a second‐order nonlinear optical side‐chain polyimide

A thermal stable aromatic polyimide (PI) with side‐chain second‐order nonlinear optical (NLO) chromophores has been developed. The PI was prepared by the ring‐opening polyaddition of 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride with a new diamine having two N‐ethyl‐N‐[4‐[(6‐chlorobenzothiazol‐2‐yl)diazenyl]phenyl]‐2‐aminoethanol units as the NLO chromophore, followed by poling during or after the thermal imidization process. The resulting PI had number and weight‐average molecular weights (M_n, M_w) of 25,000 and 80,000, respectively, and a relatively high glass transition temperature of 180°C. The second harmonic coefficient (d₃₃) of PI at the wavelength of 1.064 μm was 138 pm/V (329.6 × 10⁻⁹ esu) and remained unchanged at elevated temperatures. The corona poling process of the NLO‐substituted poly(amic acid) to the PI was also studied in detail by measuring the second harmonic generation (SHG) from the polymer films. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1321–1329, 1999     

Room‐temperature Suzuki–Miyaura cross‐coupling reaction with α‐diimine Pd(II) catalysts

An α‐diimine Pd(II) complex containing chiral sec‐phenethyl groups, {bis[N,N′‐(4‐methyl‐2‐sec‐phenethylphenyl)imino]‐2,3‐butadiene}dichloropalladium (rac‐ C1 ), was synthesized and characterized. rac‐ C1 was applied as an efficient catalyst for the Suzuki–Miyaura cross‐coupling reaction between various aniline halides and arylboronic acid in PEG‐400–H₂O at room temperature. Among a series of aniline halides, rac‐ C1 did not catalyze the cross‐coupling of aniline chlorides and fluorides but efficiently catalyzed the cross‐coupling of aniline bromides and iodides with phenylboronic acid. The catalytic activity reduced slightly with increasing steric hindrance of the aniline bromides. The complexes {bis[N,N′‐(4‐fluoro‐2,6‐diphenylphenyl)imino]‐2,3‐butadiene}dichloropalladium and {bis[N,N′‐(4‐fluoro‐2,6‐diphenylphenyl)imino]acenaphthene}dichloropalladium were also found to be efficient catalysts for the reaction. Copyright © 2015 John Wiley & Sons, Ltd.     

Nonlinear optical polyimides consisting of chromophore‐containing dendrons with site‐isolation effect

To investigate the dendritic structure effects on the electro‐optical (EO) coefficients and thermal stability of the nonlinear optical (NLO) active materials, a bifunctional compound, IDD (4‐isocyanato‐4′(3,3‐dimethyl‐ 2,4‐dioxo‐acetidino)‐diphenylmethane) was used as a building block to synthesize a series of novel NLO chromophore‐containing dendritic structures including Generation 0.5 (G0.5) to Generation 3 (G3). The glass transition temperatures (T_g) of G1–G3 dendrons were in the range of 76–116°C, whereas only the G0.5 dendron exhibited a melting temperature (T_m), 98°C. Moreover, a series of NLO‐active guest–host systems ranging from polyimide‐G0.5 (PI‐G0.5) to polyimide‐G3 (PI‐G3) were prepared by blending 20 wt% chromophore‐containing dendron with a high T_g polyimide. EO coefficients ranged from 6.1 to 12.9 pm/V. The r₃₃/dye content ratio increased with increasing generation of dendron‐containing polyimide samples. Particularly, the improvement in r₃₃/dye content ratio of PI‐G2.5 sample tripled as compared to that of the guest–host sample with Disperse Red 1. Excellent temporal stability of PI‐G0.5 and PI‐G1.5 at 80°C was obtained. Moreover, waveguide properties for NLO polymers containing higher generation dendrons (3.1–3.6 dB/cm at 830 nm) were also obtained. Copyright © 2008 John Wiley & Sons, Ltd.     

New poly(amide–imide)s syntheses. XXIII. Synthesis and properties of poly(amide–imide)s derived from 4,4′‐[1,4‐phenylenebis(isopropylidene‐1,4‐phenyleneoxy)]dianiline and various bis(trimellitimide)s

A series of poly(amide–imide)s III_a–m containing flexible isopropylidene and ether groups in the backbone were synthesized by the direct polycondensation of 4,4′‐[1,4‐phenylenebis(isopropylidene‐1,4‐phenyleneoxy)]dianiline (PIDA) with various bis(trimellitimide)s II_a–m in N‐methyl‐2‐pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. The resulting poly(amide–imide)s had inherent viscosities in the range of 0.80–1.36 dL/g. Except for those from the bis(trimellitimide)s of p‐phenylenediamine and benzidine, all the polymers could be cast from DMAc into transparent and tough films. They exhibited excellent solubility in polar solvents. The 10% weight loss temperatures of the polymers in air and in nitrogen were all above 495°C, and their T_g values were in the range of 201–252°C. Some properties of poly(amide–imide)s III were compared with those of the corresponding poly(amide–imide)s V prepared from the bis(trimellitimide) of diamine PIDA and various aromatic diamines. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 69–76, 1999     

Model Construction for the A–B–C Ring System of Lysergic Acid via Vilsmeier–Haack‐Type Cyclization of 1H‐Indole‐4‐propanoic Acid Derivatives

Vilsmeier–Haack‐type cyclization of 1H‐indole‐4‐propanoic acid derivatives was examined as model construction for the A–B–C ring system of lysergic acid ( 1 ). Smooth cyclization from the 4 position of 1H‐indole to the 3 position was achieved by Vilsmeier–Haack reaction in the presence of K₂CO₃ in MeCN, and the best substrate was found to be the N,N‐dimethylcarboxamide 9 (Table 1). The modified method can be successfully applied to an α‐amino acid derivative protected with an N‐acetyl function, i.e., to 27 (Table 2); however, loss of optical purity was observed in the cyclization when a chiral substrate (S)‐ 27 was used (Scheme 5). On the other hand, the intramolecular Pummerer reaction of the corresponding sulfoxide 20 afforded an S‐containing tricyclic system 22 , which was formed by a cyclization to the 5 position (Scheme 3).     

Synthesis of poly(p‐methoxyphenylacetylene) with the vanadium acetylacetonate‐aluminum triethyl Ziegler–Natta catalyst system: Cyclotrimers/polymer ratio analysis

Poly(p‐methoxyphenylacetylene) was obtained by the reaction of p‐methoxyphenylacetylene (MOPA) with the vanadium acetylacetonate‐aluminum triethyl V(acac)₃‐AlEt₃ homogeneous catalyst system. The crude product was always a mixture of 1,2,4‐ and 1,3,5‐tris(p‐methoxyphenyl)benzene and poly(MOPA) of low averaged molecular weight. The 1,2,4‐ and 1,3,5‐cyclotrimers versus poly(MOPA) ratio was analyzed. The poly(MOPA) obtained under different conditions, on the basis of the spectroscopic data, always shows a cis–transoidal stereo‐regular structure. Molecular mass of poly(MOPA) was determined by vapor pressure osmometry, high pressure liquid chromatography (HPLC), and gel permeation chromatography (GPC) techniques. The kinetics of the reaction has been also analyzed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5987–5997, 2005     

Homoleptic Zincate‐Promoted Room‐Temperature Halogen–Metal Exchange of Bromopyridines

Homoleptic lithium tri‐ and tetraalkyl zincates were reacted with a set of bromopyridines. Efficient and chemoselective bromine–metal exchanges were realized at room temperature with a substoichiometric amount of nBu₄ZnLi₂?TMEDA reagent (1/3 equiv; TMEDA=N,N,N′,N′‐tetramethylethylenediamine). This reactivity contrasted with that of tBu₄ZnLi₂?TMEDA, which was inefficient below one equivalent. DFT calculations allowed us to rationalize the formation of N???Li stabilized polypyridyl zincates in the reaction. The one‐pot difunctionalization of dibromopyridines was also realized using the reagent stoichiometrically. The direct creation of C? Zn bonds in bromopyridines enabled us to perform efficient Negishi‐type cross‐couplings.     

Hydrazine‐based polyimides from isomeric bis(chlorophthalimide)s

3,3′‐Dichloro‐N,N′‐biphthalimide (3,3′‐DCBPI), 3,4′‐dichloro‐N,N′‐biphthalimide (3,4′‐DCBPI), and 4,4′‐dichloro‐N,N′‐biphthalimide (4,4′‐DCBPI) were synthesized from 3‐ or 4‐chlorophthalic anhydrides and hydrazine in glacial acetic acid. The yield of 3,3′‐DCBPI (90%) was much higher than that of 4,4′‐DCBPI (33%) because of the better stability of the intermediate, 3‐chloro‐N‐aminophthalimide, and 3,3′‐DCBPI. A series of hydrazine‐based polyimides were prepared from isomeric DCBPIs and 4,4′‐thiobisbenzenethiol (TBBT) in N,N‐dimethylacetamide in the presence of tributylamine. Inherent viscosity of these polymers was in the range of 0.51–0.69 dL/g in 1‐methyl‐2‐pyrrolidinone (NMP) at 30 °C. These polyimides were soluble in 1,1,2,2‐terachloroethane, NMP, and phenols. The 5% weight‐loss temperatures (T_5%s) of the polymers were near 450 °C in N₂. Their glass‐transition temperatures (T_gs) determined by dynamic mechanical thermal analysis and differential scanning calorimetry increased according to the order of polyimides based on 4,4′‐DCBPI, 3,4′‐DCBPI, and 3,3′‐DCBPI. The hydrolytic stability of these polymers was measured under acid, basic, and neutral conditions and the results indicated that the order was 3,3′‐DCBPI/TBBT > 3,4′‐DCBPI/TBBT > 4,4′‐DCBPI/TBBT. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4933–4940, 2007     

V‐shaped graft copolymers via triple click reactions: Diels–alder,copper‐catalyzed azide–alkyne cycloaddition,and nitroxide radical coupling

We report here a simple and universal synthetic pathway covering triple click reactions, Diels–Alder, copper‐catalyzed azide–alkyne cycloaddition (CuAAC), and nitroxide radical coupling (NRC), to prepare well‐defined graft copolymers with V‐shaped side chains. The Diels–Alder click reaction between the furan protected‐maleimide‐terminated poly(ethylene glycol) (PEG) and a trifunctional core ( 1 ) carrying an anthracene, alkyne, and bromide was carried out to yield the corresponding α‐alkyne‐ and α‐bromide‐terminated PEG (PEG‐alkyne/Br) in toluene at 110 °C. Subsequently, the polystyrene or polyoxanorbornene with pendant azide functionality as a main backbone is reacted with the PEG‐alkyne/Br and 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO)‐terminated poly(ε‐caprolactone) using the CuAAC and NRC reactions in a one‐pot fashion in N,N′‐dimethylformamide at room temperature to result in the target V‐shaped graft copolymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4667–4674     

Organic–inorganic poly(N‐vinylpyrrolidone) copolymers with double‐decker silsesquioxane in the main chains: Synthesis,glass transition,and self‐assembly behavior

An organic–inorganic copolymer with polyhedral oligomeric silsesquioxane (POSS) and xanthate moieties in the main chain was synthesized via the polycondensation between 3,13‐di(2‐bromopropionate)propyl double‐decker silsesquioxane (DDSQ) and 1,4‐di(xanthate potassium)butane. This hybrid copolymer was used as the macromolecular chain transfer agent to obtain the organic–inorganic poly(N‐vinylpyrrolidone) (PVPy) copolymers via a reversible addition fragmentation chain transfer/macromolecular design via the interchange of xanthates (RAFT/MADIX) polymerization approach; the polymerization behavior of N‐vinyl pyrrolidone was investigated by means of gel permeation chromatography. It was found that the polymerization was in a living and controlled manner. Transmission electron microscopy (TEM) showed that the organic–inorganic PVPy copolymers with DDSQ in the main chains were microphase‐separated in bulks. Compared to plain PVPy, the organic–inorganic PVPy copolymers displayed the decreased glass transition temperatures (T_gs); the decreased T_gs are attributable to the effect of the introduced DDSQ cages on the packing of PVPy chains as evidenced by means of Fourier transform infrared spectroscopy (FTIR). In water, the organic–inorganic PVPy copolymers can self‐assemble into the spherical nano‐objects with the size of 20–50 nm in diameter. In the self‐assembled nano‐objects, the aggregates of the hydrophobic DDSQ constituted the cores of the polymeric micelles whereas the PVPy chains between the DDSQ behaved as the coronas of the polymeric micelles. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2949–2961     

Flexibilized styrene–N‐substituted maleimide copolymers. II. Multiblock copolymers prepared from PTHF‐based iniferters

This article describes the synthesis and molecular characterization of thermal polymeric iniferters, based on hydroxy‐terminated poly(tetrahydrofuran) (PTHF), bearing thiuram disulfide groups along the chain. Thermal polymerization after the addition of styrene (S) and N‐methylmaleimide (MI) to these PTHF‐based polymeric iniferters yielded segmented PTHF (SMI‐block‐PTHF)_n block copolymers that proved to have a single T_g. The multiblock copolymers were molecularly characterized by elemental analysis, IR, and NMR. The thermal stability, as checked by thermogravimetric analysis, proved to be good up to about 350 °C. A size exclusion chromatography/differential viscosity (DV) analysis showed that the molecular weights of the synthesized single‐phase multiblock copolymers were sufficiently high (several times the estimated molecular weight between two adjacent entanglements) to determine the entanglement density from the rubbery plateau modulus, for which the method developed by S. Wu (J Polym Sci Part B: Polym Phys 1989, 27, 723–741) was applied. The entanglement density of flexibilized SMI proved to be about 20–25% higher than that of the nonflexibilized SMI. This increase is disappointing, and more work, based on the described concept, is required to achieve the desired enhancement of the toughness. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3558–3568, 2000     

Synthesis and characterization of novel poly(ester‐carbonate)s by copolymerization of trans‐4‐hydroxy‐L‐proline with cyclic carbonate

The melt ring‐opening/condensation reaction of trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L‐proline (N‐CBz‐Hpr) with cyclic carbonate [trimethylene carbonate (tri‐MC) or tetramethylene carbonate (tetra‐MC)] at a wide range of molar fractions in the feed produced new degradable poly(ester‐carbonate)s. The influence of reaction conditions such as polymerization time and temperature on the yield and inherent viscosity of the copolymers was investigated. The polymerizations were carried out in bulk at 140 °C with 1.5 wt % stannous octoate as a catalyst for 30 h. The poly(ester‐carbonate)s obtained were characterized by Fourier transform infrared spectroscopy, ¹H NMR, differential scanning calorimetry, gel permeation chromatography, and Ubbelohde viscometry. The copolymers synthesized exhibited moderate molecular weights with rather narrow molecular weight distributions. The values of the glass‐transition temperature (T_g) of the copolymers depend on the molar fractions of cyclic carbonate. For the poly(N‐CBz‐Hpr‐co‐tri‐MC) system, with a decreased tri‐MC content from 93 to 16 mol %, the T_g increased from ?10 to 60 °C. Similarly, for the poly(N‐CBz‐Hpr‐co‐tetra‐MC) system, when the tetra‐MC content decreased from 80 to 8 mol %, the T_g increased from ?18 to 52 °C. The relationship between the poly(N‐CBz‐Hpr‐co‐tri‐MC) T_g and the compositions was in approximation with the Fox equation. In vitro degradation of these poly(N‐CBz‐Hpr‐co‐tri‐MC)s was evaluated from weight‐loss measurements. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1435–1443, 2003     

Preparation and properties of imide‐containing elastic polymers from elastic polyureas and pyromellitic dianhydride

A new approach to obtain imide‐containing elastic polymers (IEPs) via elastic and high‐molecular‐weight polyureas, which were prepared from α‐(4‐aminobenzoyl)‐ω‐[(4‐aminobenzoyl)oxy]‐poly(oxytetramethylene) and the conventional diisocyanates such as tolylene‐2,4‐diisocyanate(2,4‐TDI), tolylene‐2,6‐diisocyanate(2,6‐TDI), and 4,4′‐diphenylmethanediisocyanate (MDI), was investigated. IEP solutions were prepared in high yield by the reaction of the polyureas with pyromellitic dianhydride in N‐methyl‐2‐pyrrolidone (NMP) at 165°C for 3.7–5.2 h. IEPs were obtained by the thermal treatment at 200°C for 4 h in vacuo after NMP was evaporated from the resulting IEP solutions. We assumed a mechanism of the reaction via N‐acylurea from the identification of imide linkage and amid acid group in IEP solutions. NMR and FTIR analyses confirmed that IEPs were segmented polymers composed of imide hard segment and poly(tetramethylene oxide) (PTMO) soft segment. The dynamic mechanical and thermal analyses indicated that the IEPs prepared from 2,6‐TDI and MDI showed a glass‐transition temperature (T_g ) at about −60°C, corresponding to T_g of PTMO segment, and suggested that microphase‐separation between the imide segment and the PTMO segment occured in them. TGA studies indicated the 10% weight‐loss temperatures (T₁₀) under air for IEPs were in the temperature range of 343–374°C. IEPs prepared from 2,6‐TDI and MDI showed excellent tensile properties and good solvent resistance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 715–723, 2000     

Synthesis,structure and characterization of two new metal–organic coordination polymers based on the ligand 5‐iodobenzene‐1,3‐dicarboxylate

Two new coordination polymers (CPs) formed from 5‐iodobenzene‐1,3‐dicarboxylic acid (H₂iip) in the presence of the flexible 1,4‐bis(1H‐imidazol‐1‐yl)butane (bimb) auxiliary ligand, namely poly[[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)butane‐κ²N³:N^3′](μ₃‐5‐iodobenzene‐1,3‐dicarboxylato‐κ⁴O¹,O^1′:O³:O^3′)cobalt(II)], [Co(C₈H₃IO₄)(C₁₀H₁₄N₄)]_n or [Co(iip)(bimb)]_n, (1), and poly[[[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)butane‐κ²N³:N^3′](μ₂‐5‐iodobenzene‐1,3‐dicarboxylato‐κ²O¹:O³)zinc(II)] trihydrate], {[Zn(C₈H₃IO₄)(C₁₀H₁₄N₄)]·3H₂O}_n or {[Zn(iip)(bimb)]·3H₂O}_n, (2), were synthesized and characterized by FT–IR spectroscopy, thermogravimetric analysis (TGA), solid‐state UV–Vis spectroscopy, single‐crystal X‐ray diffraction analysis and powder X‐ray diffraction analysis (PXRD). The iip²⁻ ligand in (1) adopts the (κ¹,κ¹‐μ₂)(κ¹, κ¹‐μ₁)‐μ₃ coordination mode, linking adjacent secondary building units into a ladder‐like chain. These chains are further connected by the flexible bimb ligand in a trans–trans–trans conformation. As a result, a twofold three‐dimensional interpenetrating α‐Po network is formed. Complex (2) exhibits a two‐dimensional (4,4) topological network architecture in which the iip²⁻ ligand shows the (κ¹)(κ¹)‐μ₂ coordination mode. The solid‐state UV–Vis spectra of (1) and (2) were investigated, together with the fluorescence properties of (2) in the solid state.     

Low loss second‐order non‐linear optical crosslinked polymers based on a phosphorus‐containing maleimide

A series of crossslinked organic and organic/inorganic polymers based on maleimide chemistry have been investigated for second‐order non‐linear optical (NLO) materials with excellent thermal stability and low optical loss. Two reactive chromophores (maleimide‐containing azobenzene dye and alkoxysilane‐containing azobenzene dye) were incorporated into a phosphorus‐containing maleimide polymer, respectively. The selection of the phosphorus‐containing maleimide polymer as the polymeric matrices provides enhanced solubility and thermal stability, and excellent optical quality. Moreover, a full interpenetrating network (IPN) was formed through simultaneous addition reaction of the phosphorus‐containing maleimide, and sol‐gel process of alkoxysilane dye (ASD). Atomic force microscopy (AFM) results indicate that the inorganic networks are distributed uniformly throughout the polymer matrices on a nano‐scale. The silica particle sizes are well under 100 nm. Using in situ contact poling, the r₃₃ coefficients of 2.2–17.0 pm/V have been obtained for the optically clear phosphorus‐containing NLO materials. Excellent temporal stability (100°C) and low optical loss (0.99–1.71 dB/cm; 830 nm) were also obtained for these phosphorus‐containing materials. Copyright © 2004 John Wiley & Sons, Ltd.     

Structural analysis of interpenetrated methyl‐modified MOF‐5 and its gas‐adsorption properties

The first example of an interpenetrated methyl‐modified MOF‐5 with the formula Zn₄O(DMBDC)₃(DMF)₂, where DMBDC^2? is 2,5‐dimethylbenzene‐1,4‐dicarboxylate and DMF is N,N‐dimethylformamide (henceforth denoted as Me₂MOF‐5‐int ), namely, poly[tris(μ₄‐2,5‐dimethylbenzene‐1,4‐dicarboxylato)bis(N,N‐dimethylformamide)‐μ₄‐oxido‐tetrazinc(II)], [Zn₄(C₁₀H₈O₄)₃O(C₃H₇NO)₂]_n, has been obtained from a solvothermal synthesis of 2,5‐dimethylbenzene‐1,4‐dicarboxylic acid and Zn(NO₃)₂·6H₂O in DMF. A systematic study revealed that the choice of solvent is of critical importance for the synthesis of phase‐pure Me₂MOF‐5‐int , which was thoroughly characterized by single‐crystal and powder X‐ray diffraction (PXRD), as well as by gas‐adsorption analyses. The Brunauer–Emmett–Teller surface area of Me₂MOF‐5‐int (660 m² g^?1), determined by N₂ adsorption, is much lower than that of nonpenetrated Me₂MOF‐5 (2420 m² g^?1). However, Me₂MOF‐5‐int displays an H₂ uptake capacity of 1.26 wt% at 77 K and 1.0 bar, which is comparable to that of non‐interpenetrated Me₂MOF‐5 (1.51 wt%).     

Controllable assembly of a three‐dimensional metal–organic supramolecular framework displaying hydrogen‐bonding and π–π stacking interactions

The complex poly[[aqua(μ₂‐phthalato‐κ²O¹:O²){μ₃‐2‐[3‐(pyridin‐2‐yl)‐1H‐pyrazol‐1‐yl]acetato‐κ⁴N²,N³:O:O′}{μ₂‐2‐[3‐(pyridin‐2‐yl)‐1H‐pyrazol‐1‐yl]acetato‐κ³N²,N³:O}dizinc(II)] dihydrate], {[Zn₂(C₁₀H₈N₃O₂)₂(C₈H₄O₄)(H₂O)]·2H₂O}_n, has been prepared by solvothermal reaction of 2‐[3‐(pyridin‐2‐yl)‐1H‐pyrazol‐1‐yl]acetonitrile (PPAN) with zinc(II). Under hydrothermal conditions, PPAN is hydrolyzed to 2‐[3‐(pyridin‐2‐yl)‐1H‐pyrazol‐1‐yl]acetate (PPAA⁻). The structure determination reveals that the complex is a one‐dimensional double chain containing cationic [Zn₄(PPAA)₄]⁴⁺ structural units, which are further extended by bridging phthalate ligands. The one‐dimensional chains are extended into a three‐dimensional supramolecular architecture via hydrogen‐bonding and π–π stacking interactions.     

Band gap,sorption properties and fluorescence sensing behaviour of a novel 1D→2D cathenane‐like cobalt(II)–organic framework

A novel hydrolytic stable Co^II–organic framework, namely poly[[bis(2‐amino‐4‐sulfonatobenzoato‐κO¹)tetraaquatris{μ‐1,4‐bis[(imidazol‐1‐yl)methyl]benzene‐κ²N³:N^3′}dicobalt(II)] tetrahydrate], {[Co(C₇H₅NO₅S)(C₁₄H₁₄N₄)_1.5(H₂O)₂]·2H₂O}_n, ( 1 ), based on multifunctional 2‐amino‐5‐sulfobenzoic acid (H₂asba) and the auxiliary flexible ligand 1,4‐bis[(imidazol‐1‐yl)methyl]benzene (bix), was prepared using the solution evaporation method. The purity of ( 1 ) was confirmed by elemental analysis and powder X‐ray diffraction (PXRD) analysis. Complex ( 1 ) shows a novel 1D→2D interpenetrating network, which is further extended into a 3D supramolecular framework with channels occupied by the lattice water molecules. The 2‐amino‐4‐sulfonatobenzoate (asba^2?) ligand adopts a monodentate coordination mode. The bix ligands exhibit gauche–gauche (GG) and trans–trans (TT) conformations. A detailed analysis of the solid‐state diffuse‐reflectance UV–Vis spectrum reveals that an indirect band gap exists in the complex. The band structure, the total density of states (TDOS) and the partial density of states (PDOS) were calculated using the CASTEP program. The calculated band gap (E_g) matches well with the experimental one. The complex exhibits a reversible dehydration–rehydration behaviour. Interestingly, gas sorption experiments demonstrate that the new fully anhydrous compound obtained by activating complex ( 1 ) at 400 K shows selective adsorption of CO₂ over N₂. Complex ( 1 ) retains excellent framework stability in a variety of solvents and manifests distinct solvent‐dependent fluorescence properties. Moreover, the complex shows multiresponsive fluorescence sensing for some nitroaromatics in aqueous medium.     

Novel,biodegradable, functional poly(ester‐carbonate)s by copolymerization of trans‐4‐hydroxy‐L‐proline with cyclic carbonate bearing a pendent carboxylic group

Water‐soluble poly(ester‐carbonate) having pendent amino and carboxylic groups on the main‐chain carbon is reported for the first time. This article describes the melt ring‐opening/condensation reaction of trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline (N‐CBz‐Hpr) with 5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one (MBC) at a wide range of molar fractions. The influence of reaction conditions such as catalyst concentration, polymerization time, and temperature on the number average molecular weight (M_n) and molecular weight distribution (M_w/M_n) of the copolymers was investigated. The polymerizations were carried out in bulk at 110 °C with 3 wt % stannous octoate as a catalyst for 16 h. The poly(ester‐carbonate)s obtained were characterized by Fourier transform infrared spectroscopy, ¹H NMR, differential scanning calorimetry, and gel permeation chromatography. The copolymers synthesized exhibited moderate molecular weights (M_n = 6000–14,700 g mol^?1) with reasonable molecular weight distributions (M_w/M_n = 1.11–2.23). The values of the glass‐transition temperature (T_g) of the copolymers depended on the molar fractions of cyclic carbonate. When the MBC content decreased from 76 to 12 mol %, the T_g increased from 16 to 48 °C. The relationship between the poly(N‐CBz‐Hpr‐co‐MBC) T_g and the compositions was in approximation with the Fox equation. In vitro degradation of these poly(N‐CBz‐Hpr‐co‐MBC)s was evaluated from weight‐loss measurements and the change of M_n and M_w/M_n. Debenzylation of 3 by catalytic hydrogenation led to the corresponding linear poly(ester‐carbonate), 4 , with pendent amino and carboxylic groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2303–2312, 2004