Ethylene–propylene copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Ethylene–propylene copolymerization, using [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ (R₁ = CF₃, Ph, or t‐Bu; R₂ = CH₃ or CF₃) titanium complexes activated with modified methylaluminoxane as a cocatalyst, was investigated. High‐molecular‐weight ethylene–propylene copolymers with relatively narrow molecular weight distributions and a broad range of chemical compositions were obtained. Substituents R₁ and R₂ influenced the copolymerization behavior, including the copolymerization activity, methylene sequence distribution, molecular weight, and polydispersity. With small steric hindrance at R₁ and R₂, one complex (R₁ = CF₃; R₂ = CH₃) displayed high catalytic activity and produced copolymers with high propylene incorporation but low molecular weight. The microstructures of the copolymers were analyzed with ¹³C NMR to determine the methylene sequence distribution and number‐average sequence lengths of uninterrupted methylene carbons. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5846–5854, 2006     

Copolymerization of styrene and norbornene with β‐diketiminato nickel/methylaluminoxane catalytic system

Styrene–norbornene (S‐N) copolymerizations were carried out using β‐diketiminato nickel complexes CH{C(CF₃)NAr}₂NiBr (Ar = 2,6‐ⁱPr₂C₆H₃, 1 ; Ar = 2,6‐Me₂C₆H₃, 2 ) in the presence of methylaluminoxane. The influence of the comonomer feed content and polymerization temperature on the conversion and composition of the copolymers with the catalytic system was investigated. An increase in the feed ratio of S/N led to an increase in the incorporated styrene content of the resulting copolymer. NMR characterization of the copolymers generated with the catalytic systems showed that the random S‐N copolymers are produced. Differential scanning calorimetric determination of the copolymers shows higher T_g values than polystyrene, and gel permeation chromatographic measurements have shown that the copolymers possess rather narrow molecular weight distributions, suggesting that the copolymerization take place at a single active site. Copyright © 2012 John Wiley & Sons, Ltd.     

Ethylene/α‐olefin copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Copolymerizations of ethylene with α‐olefins (i.e., 1‐hexene, 1‐octene, allylbenzene, and 4‐phenyl‐1‐butene) using the bis(β‐enaminoketonato) titanium complexes [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ ( 1a : R₁ = CF₃, R₂ = CH₃; 1b : R₁ = Ph, R₂ = CF₃; and 1c : R₁ = t‐Bu, R₂ = CF₃), activated with modified methylaluminoxane as a cocatalyst, have been investigated. The catalyst activity, comonomer incorporation, and molecular weight, and molecular weight distribution of the polymers produced can be controlled over a wide range by the variation of the catalyst structure, α‐olefin, and reaction parameters such as the comonomer feed concentration. The substituents R₁ and R₂ of the ligands affect considerably both the catalyst activity and comonomer incorporation. Precatalyst 1a exhibits high catalytic activity and produces high‐molecular‐weight copolymers with high α‐olefin insertion. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6323–6330, 2005     

Homo‐ and copolymerization of norbornene derivatives with ethene by ansa‐fluorenylamidodimethyltitanium activated with methylaluminoxane

(t‐BuNSiMe₂Flu)TiMe₂ ( 1 ) activated with Me₃Al‐free methylaluminoxane (dried MAO) which conducts vinyl addition polymerization of norbornene (N) with very high activity was applied for homopolymerization of N derivatives (i.e., 5‐vinyl‐2‐norbornene (5V2N), 5‐ethylidene‐2‐norbornene (5E2N), dicyclopentadiene (DCPD)) at 40 °C. The activities for the N derivatives were about two orders of magnitude lower than that for N and decreased in the following order: 5E2N ? 5V2N ? DCPD. Copolymerization of ethene (E) and 5E2N under an atmospheric pressure of E was then conducted by 1 ‐dried MAO. The copolymerization proceeded with better activity than the homopolymerization of 5E2N and gave poly(E‐co‐5E2N) with narrow molecular weight distribution. The content of the ethylidene group in poly(E‐co‐5E2N) was controlled by the feed ratio of 5E2N/E. The T_g value of the copolymer changed from 70 °C to 155 °C according to the 5E2N content from 27 mol % to 68 mol %. The addition of N as a third monomer to the E‐5E2N copolymerization improved the activity and raised the T_g values of the terpolymer above 200 °C. The content of 5E2N was controlled by the 5E2N/N ratio with keeping the high T_g values. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4581–4587, 2007     

Copolymerization of ethylene and cyclopentene with bis(β‐enaminoketonato) titanium complexes

The copolymerizations of ethylene and cyclopentene with bis(β‐enaminoketonato) titanium complexes {[(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂; R₁ = CF₃ and R₂ = CH₃ for 1a , R₁ = Ph and R₂ = CF₃ for 1b ; and R₁ = t‐Bu and R₂ = CF₃ for 1c } activated with modified methylaluminoxane (MMAO) as a cocatalyst were investigated. High‐molecular‐weight copolymers with cis‐1,2‐cyclopentene units were obtained. The catalyst activity, cyclopentene incorporation, polymer molecular weight, and polydispersity could be controlled over a wide range through the variation of the catalyst structure and reaction parameters, such as the Al/Ti molar ratio, cyclopentene feed concentration, and polymerization reaction temperature. The complex 1b /MMAO catalyst system exhibited the characteristics of a quasi‐living ethylene polymerization and an ethylene–cyclopentene copolymerization and allowed the synthesis of polyethylene‐block‐poly(ethylene‐co‐cyclopentene) diblock copolymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1681–1689, 2005     

Vinylic and ring‐opening metathesis polymerization of norbornene with bis(β‐ketoamine) cobalt complexes

Cobalt complexes 1 – 4 bearing N,O‐chelate ligands based on condensation products of 1‐phenyl‐3‐methyl‐4‐benzoyl‐5‐pyrazolone with aniline, o‐methylaniline, α‐naphthylamine, and p‐nitroaniline, respectively, were synthesized, and the structures of 1 and 4 were characterized by single‐crystal X‐ray diffraction analyses. The bis(β‐ketoamine) cobalt complexes could act as moderately active catalyst precursors for norbornene polymerization with the activation of methylaluminoxane. This catalytic reaction proceeded mainly through a vinyl‐type polymerization mechanism. ¹H NMR and IR showed that in all cases, a small amount of double bonds raised from ring‐opening metathesis polymerization (ROMP) was present in the polymerization products. The variation of the polymerization conditions affected the ROMP unit ratio in the polynorbornenes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5535–5544, 2005     

Homo‐ and copolymerization of norbornene with styrene catalyzed by a series of copper(II) complexes in the presence of methylaluminoxane

Vinyl‐type polymerization of norbornene as well as random copolymerization of norbornene with styrene was studied using a series of copper complexes‐MAO. The precatalysts used here are copper complexes with β‐ketoamine ligands based on pyrazolone derivatives and the molecular structure of complex 4 was determined using X‐ray analysis. All of these catalyst systems are moderately active for the vinyl‐type polymerization of norbornene and random copolymerization of norbornene with styrene. The random copolymers obtained suggest that only one type of active species is present. Gel permeation chromatography (GPC) and NMR indicate that the copolymers are ‘true’ copolymers. The copolymerization reactivity ratios (r_NBE = 20.11 and r_Sty = 0.035) indicate a much higher reactivity of norbornene, which suggests a coordination polymerization mechanism. The solubility and processability of the copolymers are improved relative to polynorbornene and the thermostability of the copolymers is improved relative to polystyrene. Copyright © 2006 John Wiley & Sons, Ltd.     

Atmospheric reactivity of ethylene catalyzed by β‐diketiminato Ni(II)/methylaluminoxane system

Atmospheric ethylene reactions were studied with backbone fluorinated β‐diketiminato Ni(II) complexes CH{C(CF₃)NAr}₂NiBr (1, Ar = 2,6‐Me₂C₆H₃, and 2 2,6‐ⁱPr₂C₆H₃) activated by methylaluminoxane (MAO). The catalytic systems exhibit the characteristics of catalyzing simultaneously polymerization and oligomerization of ethylene, indicating different active species involved in the reaction system. In an effort to investigate the alkylation species involved in the β‐diketiminato nickel (II)/MAO system, the reaction of 1 with methylaluminoxane were studied. With ¹⁹F{¹H NMR} spectra, two sets of new signals different from 1 were presented. Two alkylation products were proposed precursors of active species for producing oligomer and polymer of ethylene in the β‐diketiminato Ni(II)/MAO system. Copyright © 2014 John Wiley & Sons, Ltd.     

Vinyl polymerization of norbornene catalyzed by a new bis(β‐ketoamino)nickel(II) complex–methylaluminoxane system

A new β‐ketoimine ligand was prepared through traditional condensation of 2‐acetylcyclohexanone with 1‐naphthylamine. Consequently, the new moisture‐ and air‐stable bis(β‐ketoamino)nickel(II) complex Ni[2‐CH₃C(O)C₆H₈(NAr)]₂ (Ar = naphthyl) was synthesized and characterized. The solid‐state structures of the ligand and complex have been determined by single‐crystal X‐ray diffraction. Additionally, the new complex is a highly active catalyst precursor for polymerization of norbornene in combination with methylaluminoxane. Copyright © 2005 John Wiley & Sons, Ltd.     

Living copolymerization of ethylene with norbornene mediated by heteroligated (Salicylaldiminato)(β‐enaminoketonato)titanium catalysts

Three heteroligated (salicylaldiminato)(β‐enaminoketonato)titanium complexes [3‐Bu^t‐2‐OC₆H₃CH?N(C₆F₅)][(p‐XC₆H₄)N?C(Bu^t)CHC(CF₃)O]TiCl₂ ( 3a : X = F, 3b : X = Cl, 3c : X = Br) were synthesized and investigated as the catalysts for ethylene polymerization and ethylene/norbornene copolymerization. In the presence of modified methylaluminoxane as a cocatalyst, these unsymmetric catalysts exhibited high activities toward ethylene polymerization, similar to their parallel parent catalysts. Furthermore, they also displayed favorable ability to efficiently incorporate norbornene into the polymer chains and produce high molecular weight copolymers under the mild conditions, though the copolymerization of ethylene with norbornene leads to relatively lower activities. The sterically open structure of the β‐enaminoketonato ligand is responsible for the high norbornene incorporation. The norbornene concentration in the polymerization medium had a profound influence on the molecular weight distribution of the resulting copolymer. When the norbornene concentration in the feed is higher than 0.4 mol/L, the heteroligated catalysts mediated the living copolymerization of ethylene with norbornene to form narrow molecular weight distribution copolymers (M_w/M_n < 1.20), which suggested that chain termination or transfer reaction could be efficiently suppressed via the addition of norbornene into the reaction medium. Polymer yields, catalytic activity, molecular weight, and norbornene incorporation can be controlled within a wide range by the variation of the reaction parameters such as comonomer content in the feed, reaction time, and temperature. ©2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6072–6082, 2009     

Copolymerization of ethylene or propylene with α‐olefins containing hydroxyl groups with zirconocene/methylaluminoxane catalyst

Copolymerization of olefins (ethylene and propylene) and 5‐hexen‐1‐ol pretreated with alkylaluminum was performed using [dimethysilylbis(9‐fluorenyl)]zirconium dichloride/methylaluminoxane as the catalyst. The copolymerization required extra addition of alkylaluminum to prevent deactivation of the catalyst when 5‐hexen‐1‐ol was pretreated with trimethylaluminum, whereas the triisobutylaluminum‐treated system did not require any addition of alkylaluminum. The molecular weight of the copolymer depended on the kind of alkylaluminum compound (masking reagent, additive, and cocatalyst). ¹³C NMR analysis proved that poly(ethylene‐co‐5‐hexen‐1‐ol) containing 50 mol % of 5‐hexen‐1‐ol acted as an alternating copolymer, whereas the poly(propylene‐co‐5‐hexen‐1‐ol) acted as a random copolymer. The surface property of the copolymers was simply evaluated by means of water drop contact angle measurement. It was found that the copolymers containing large amounts of 5‐hexen‐1‐ol units showed good hydrophilic properties. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 52–58, 2004     

Quasi‐living copolymerization of ethylene with 1‐hexene by heteroligated (salicylaldiminato β‐enaminoketonato) titanium complexes

A series of heteroligated (salicylaldiminato)(β‐enaminoketonato)titanium complexes [3‐Bu^t‐2‐OC₆H₃CH = N(C₆F₅)] [PhN = C(R₁)CHC(R₂)O]TiCl₂ [ 3a : R₁ = CF₃, R₂ = ^tBu; 3b : R₁ = Me, R₂ = CF₃; 3c : R₁ = CF₃, R₂ = Ph; 3d : R₁ = CF₃, R₂ = C₆H₄Ph(p ); 3e : R₁ = CF₃, R₂ = C₆H₄Ph(o ); 3f : R = CF₃, R₂ = C₆H₄Cl(p ); 3g : R₁ = CF₃; R₂ = C₆H₃Cl₂(2,5); 3h : R₁ = CF₃, R₂ = C₆H₄Me(p )] were investigated as catalysts for ethylene (co)polymerization. In the presence of modified methylaluminoxane as a cocatalyst, these complexes showed activities about 50%–1000% and 10%–100% higher than their corresponding bis(β‐enaminoketonato) titanium complexes for ethylene homo‐ and ethylene/1‐hexene copolymerization, respectively. They produced high or moderate molecular weight copolymers with 1‐hexene incorporations about 10%–200% higher than their homoligated counterpart pentafluorinated FI‐Ti complex. Among them, complex 3b displayed the highest activity [2.06 × 10⁶ g/mol_Ti?h], affording copolymers with the highest 1‐hexene incorporations of 34.8 mol% under mild conditions. Moreover, catalyst 3h with electron‐donating group not only exhibited much higher 1‐hexene incorporations (9.0 mol% vs. 3.2 mol%) than pentafluorinated FI‐Ti complex but also generated copolymers with similar narrow molecular weight distributions (M _w/M _n = 1.20–1.26). When the 1‐hexene concentration in the feed was about 2.0 mol/L and the hexene incorporation of resultant polymer was about 9.0 mol%, a quasi‐living copolymerization behavior could be achieved. ¹H and ¹³C NMR spectroscopic analysis of their resulting copolymers demonstrated the possible copolymerization mechanism, which was related with the chain initiation, monomer insertion style, chain transfer and termination during the polymerization process. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2787–2797     

Highly active ethylene polymerization and copolymerization with norbornene using bis(imino‐indolide) titanium dichloride–MAO system

A catalytic system of new titanium complexes with methylaluminoxane (MAO) was found to effectively polymerize ethylene for high molecular weight polyethylene as well as highly active copolymerization of ethylene and norbornene. The bis (imino‐indolide)titanium dichlorides (L₂TiCl₂, 1 – 5 ), were prepared by the reaction of N‐((3‐chloro‐1H‐indol‐2‐yl)methylene)benzenamines with TiCl₄, and characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy. The solid‐state structures of 1 and 4 were determined by X‐ray diffraction analysis to reveal the six‐coordinated distorted octahedral geometry around the titanium atom with a pair of chlorides and ligands in cis‐forms. Upon activation by MAO, the complexes showed high activity for homopolymerization of ethylene and copolymerization of ethylene and norbornene. A positive “comonomer effect” was observed for copolymerization of ethylene and norbornene. Both experimental observations and paired interaction orbital (PIO) calculations indicated that the titanium complexes with electron‐withdrawing groups in ligands performed higher catalytic activities than those possessing electron‐donating groups. Relying on different complexes and reaction conditions, the resultant polyethylenes had the molecular weights M_w in the range of 200–2800 kg/mol. The influences on both catalytic activity and polyethylene molecular weights have been carefully checked with the nature of complexes and reaction conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3415–3430, 2007     

Vinyl polymerization of norbornene by nickel(II) complexes bearing β‐diketiminate ligands

Norbornene polymerizations were carried out using nickel(II) bromide complexes CH{C(R)NAr}₂NiBr ( 1 , R = CH₃, Ar = 2, 6 ? ⁱPr₂C₆H₃; 2 , R = CH₃, Ar = 2, 6‐Me₂C₆H₃; 3 , R = CF₃, Ar = 2, 6 ? ⁱPr₂C₆H₃; 4 , R = CF₃, Ar = 2, 6‐Me₂C₆H₃) in the presence of methylaluminoxane. Compound 3 is the most active norbornene polymerization catalyst of all the nickel complexes tested. The activity of theses catalysts increases with increases in steric bulk of the substituents on the aryl rings. The electronic nature of the ligand backbone also affects the activity. The resulting polynorbornenes are vinyl type by IR and NMR analyses. Copyright © 2007 John Wiley & Sons, Ltd.     

Ethylene polymerization by sterically and electronically modulated Ni(II) α‐diimine complexes

A series of highly active ethylene polymerization catalysts based on bidendate α‐diimine ligands coordinated to nickel are reported. The ligands are prepared via the condensation of bulky ortho‐substituted anilines bearing remote push–pull substituents with acenaphthenequinone, and the precatalysts are prepared via coordination of these ligands to (DME)NiBr₂ (DME = 1,2‐dimethoxyethane) to form complexes having general formula [ZN = C(An)‐C(An) = NZ]NiBr₂ [Z = (4‐NH₂‐3,5‐C₆H₂R₂)₂CH(4‐C₆H₄Y); An, acenaphthene quinone; R, Me, Et, iPr; Y = H, NO₂, OCH₃]. When activated with methylaluminoxane (MAO) or common alkyl aluminiums such as ethyl aluminium sesquichloride (EAS) all catalysts polymerize ethylene with activities exceeding 10⁷ g‐PE/ mol‐Ni h atm at 30 °C and atmospheric pressure. Among the cocatalysts used EAS records the best activity. Effects of remote substituents on ethylene polymerization activity are also investigated. The change in potential of metal center induced by remote substituents, as evidenced by cyclic voltammetric measurements, influences the polymerization activity. UV–visible spectroscopic data have specified the important role of cocatalyst in the stabilization of nickel‐based active species. A tentative interpretation based on the formation of active and dormant species has been discussed. The resulting polyethylene was characterized by high molecular weight and relatively broad molecular weight distribution, and their microstructure varied with the structure of catalyst and cocatalyst. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1066–1082, 2008     

Monoaryloxo ytterbium(III) chlorides supported by β‐diketiminato ligands as novel initiators for the living ring‐opening polymerization of ε‐caprolactone

Ring‐opening polymerization of ε‐caprolactone (ε‐CL) was carried out using β‐diketiminato‐supported monoaryloxo ytterbium chlorides L¹Yb(OAr)Cl(THF) (1) [L¹ = N,N′‐bis(2,6‐dimethylphenyl)‐2,4‐pentanediiminato, OAr = 2,6‐di‐tert‐butylphenoxo‐], and L²Yb(OAr′)Cl(THF) (2) [L² = N,N′‐bis(2,6‐diisopropylphenyl)‐2,4‐pentanediiminato, OAr′ = 2,6‐di‐tert‐butyl‐4‐methylphenoxo‐], respectively, as single‐component initiator. The influence of reaction conditions, such as polymerization temperature, polymerization time, initiator, and initiator concentration, on the monomer conversion, molecular weight, and molecular weight distribution of the resulting polymers was investigated. Complex 1 was well characterized and its crystal structure was determined. Some features and kinetic behaviors of the CL polymerization initiated by these two complexes were studied. The polymerization rate is first order with respect to monomer. The M_n of the polymer increases linearly with the increase of the polymer yield, while polydispersity remained narrow and unchanged throughout the polymerization in a broad range of temperatures from 0 to 50 °C. The results indicated that the present system has a “living character”. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1147–1152, 2006     

Living regioselective copolymerization of ethylene with nonconjugated bicyclic dienes using (salicylaldiminato)(β‐enaminoketonato) titanium catalysts

A series of heteroligated (salicylaldiminato)(β‐enaminoketonato)titanium complexes [3‐^tBu‐2‐OC₆H₃CH?N(C₆F₅)] [PhN?C(CF₃)CHCRO]TiCl₂ [ 3a : R = Ph, 3b : R = C₆H₄Cl(p), 3c : R = C₆H₄OMe(p), 3d : R = C₆H₄Me(p), 3e : R = C₆H₄Me(o)] were synthesized and characterized. Molecular structures of 3b and 3c were further confirmed by X‐ray crystallographic analyses. In the presence of modified methylaluminoxane as a cocatalyst, these unsymmetric catalysts displayed favorable ability to incorporate 5‐vinyl‐2‐norbornene (VNB) and 5‐ethylidene‐2‐norbornene (ENB) into the polymer chains, affording high‐molecular weight copolymers with high‐comonomer incorporations and alternating sequence under the mild conditions. The comonomer concentration in the polymerization medium had a profound influence on the molecular weight distribution of the resultant copolymer. At initial comonomer concentration of higher than 0.4 mol/L, the titanium complexes with electron‐donating groups in the β‐enaminoketonato moiety mediated room‐temperature living ethylene/VNB or ENB copolymerizations. Polymerization results coupled with density functional theory calculations suggested that the highly controlled living copolymerization is probably a consequence of the difficulty in chain transfer of VNB (or ENB)‐last‐inserted species and some characteristics of living ethylene polymerization under limited conditions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Nickel and cobalt complexes bearing β‐ketoamine ligands: syntheses,structures and catalytic behavior for norbornene polymerization

Late transition metal (nickel, cobalt) complexes (1, 2) with β‐ketoamine ligand (L) based on the pyrazolone derivative are synthesized by condensing 1‐phenyl‐3‐methyl‐4‐benzoyl‐5‐pyrazolone with p‐fluoroaniline, and then treating the β‐ketoamine (L) produced with the respective metal halide. The bis(β‐ketoamine)metal complexes can act as catalyst precursors for norbornene polymerization with activation by methylaluminoxane. The effects of the central metal variation in the complex on catalyst activities and polymer microstructure are described. Copyright © 2005 John Wiley & Sons, Ltd.     

Preparation of linear α‐olefins to high‐molecular weight polyethylenes using cationic α‐diimine nickel(II) complexes containing chloro‐substituted ligands

A series of α‐diimine nickel(II) complexes containing chloro‐substituted ligands, [(Ar)N?C(C₁₀H₆)C?N(Ar)]NiBr₂ ( 4a , Ar = 2,3‐C₆H₃Cl₂; 4b , Ar = 2,4‐C₆H₃Cl₂; 4c , Ar = 2,5‐C₆H₃Cl₂; 4d , Ar = 2,6‐C₆H₃Cl₂; 4e , Ar = 2,4,6‐C₆H₂Cl₃) and [(Ar)N?C(C₁₀H₆)C?N(Ar)]₂NiBr₂ ( 5a , Ar = 2,3‐C₆H₃Cl₂; 5b , Ar = 2,4‐C₆H₃Cl₂; 5c , Ar = 2,5‐C₆H₃Cl₂), have been synthesized and investigated as precatalysts for ethylene polymerization. In the presence of modified methylaluminoxane (MMAO) as a cocatalyst, these complexes are highly effective catalysts for the oligomerization or polymerization of ethylene under mild conditions. The catalyst activity and the properties of the products were strongly affected by the aryl‐substituents of the ligands used. Depending on the catalyst structure, it is possible to obtain the products ranging from linear α‐olefins to high‐molecular weight polyethylenes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1964–1974, 2006     

Polymerization of 4‐methylpentene and vinylcyclohexane by amine bis(phenolate) titanium and zirconium complexes

The polymerization of the substituted olefins 4‐methylpentene and vinylcyclohexane by dibenzyl titanium and zirconium complexes of three amine bis(phenolate) ligands is reported. The ligands featured a dimethylamino side‐arm donor and either electron‐withdrawing (Cl and Br) or methyl phenolate substituents. After activation with B(C₆F₅)₃, the zirconium catalysts exhibited a higher activity than the titanium catalysts toward these bulky olefins. Very high weight‐average molecular weight poly(4‐methylpentene) was obtained with the zirconium catalysts. The zirconium catalysts were employed in 1‐hexene polymerization, and their activity was found to be the highest ever reported for catalysts of the amine bis(phenolate) family. The catalysts featuring methyl phenolate substituents showed a higher activity toward these substituted olefins than the electron‐poor catalysts; this trend was opposite to their activity toward 1‐hexene. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1136–1146, 2006