A posteriori error estimate for finite volume element method of the parabolic equations

In this article, residual‐type a posteriori error estimates are studied for finite volume element (FVE) method of parabolic equations. Residual‐type a posteriori error estimator is constructed and the reliable and efficient bounds for the error estimator are established. Residual‐type a posteriori error estimator can be used to assess the accuracy of the FVE solutions in practical applications. Some numerical examples are provided to confirm the theoretical results. © 2016 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 33: 259–275, 2017     

Error estimates for a finite volume element method for parabolic equations in convex polygonal domains

We analyze the spatially semidiscrete piecewise linear finite volume element method for parabolic equations in a convex polygonal domain in the plane. Our approach is based on the properties of the standard finite element Ritz projection and also of the elliptic projection defined by the bilinear form associated with the variational formulation of the finite volume element method. Because the domain is polygonal, special attention has to be paid to the limited regularity of the exact solution. We give sufficient conditions in terms of data that yield optimal order error estimates in L₂ and H 1 . The convergence rate in the L_∞ norm is suboptimal, the same as in the corresponding finite element method, and almost optimal away from the corners. We also briefly consider the lumped mass modification and the backward Euler fully discrete method. © 2004 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2004     

Alternating Direction Finite Volume Element Methods for Three-Dimensional Parabolic Equations

<正>This paper presents alternating direction finite volume element methods for three-dimensional parabolic partial differential equations and gives four computational schemes,one is analogous to Douglas finite difference scheme with second-order splitting error,the other two schemes have third-order splitting error,and the last one is an extended LOD scheme.The L~2 norm and H~1 semi-norm error estimates are obtained for the first scheme and second one,respectively.Finally,two numerical examples are provided to illustrate the efficiency and accuracy of the methods.     

半线性抛物方程的时空有限元方法

讨论半线性抛物方程的连续Galerkin时空有限元方法,利用有限元方法和有限差分方法相结合的技巧,证明了弱解的存在唯一性,给出了时间最大模,空间L~2模,即L~∞(L~2)模误差估计.并给出数值算例证明了连续时空有限元方法对于半线性抛物方程的有效性.     

Weak Galerkin finite element methods for a fourth order parabolic equation

This paper is devoted to a newly developed weak Galerkin finite element method with the stabilization term for a linear fourth order parabolic equation, where weakly defined Laplacian operator over discontinuous functions is introduced. Priori estimates are developed and analyzed in L² and an H² type norm for both semi‐discrete and fully discrete schemes. And finally, numerical examples are provided to confirm the theoretical results.     

Degenerate parabolic stochastic partial differential equations

We study the Cauchy problem for a scalar semilinear degenerate parabolic partial differential equation with stochastic forcing. In particular, we are concerned with the well-posedness in any space dimension. We adapt the notion of kinetic solution which is well suited for degenerate parabolic problems and supplies a good technical framework to prove the comparison principle. The proof of existence is based on the vanishing viscosity method: the solution is obtained by a compactness argument as the limit of solutions of nondegenerate approximations.     

Discontinuous finite volume element method for parabolic problems

In this article, we consider the semidiscrete and the backward Euler fully discrete discontinuous finite volume element methods for the second‐order parabolic problems and obtain the optimal order error estimates in a mesh dependent norm and in the L²‐norm. © 2009 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2010     

Minimum time‐step criteria for the Galerkin finite element methods applied to one‐dimensional parabolic partial differential equations

The finite element method has been well established for numerically solving parabolic partial differential equations (PDEs). Also it is well known that a too large time step should not be chosen in order to obtain a stable and accurate numerical solution. In this article, accuracy analysis shows that a too small time step should not be chosen either for some time‐stepping schemes. Otherwise, the accuracy of the numerical solution cannot be improved or can even be worsened in some cases. Furthermore, the so‐called minimum time step criteria are established for the Crank‐Nicolson scheme, the Galerkin‐time scheme, and the backward‐difference scheme used in the temporal discretization. For the forward‐difference scheme, no minimum time step exists as far as the accuracy is concerned. In the accuracy analysis, no specific initial and boundary conditions are invoked so that such established criteria can be applied to the parabolic PDEs subject to any initial and boundary conditions. These minimum time step criteria are verified in a series of numerical experiments for a one‐dimensional transient field problem with a known analytical solution. The minimum time step criteria developed in this study are useful for choosing appropriate time steps in numerical simulations of practical engineering problems. © 2005 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2006     

Weak Galerkin finite element methods for linear parabolic integro‐differential equations

The semidiscrete and fully discrete weak Galerkin finite element schemes for the linear parabolic integro‐differential equations are proposed. Optimal order error estimates are established for the corresponding numerical approximations in both and norms. Numerical experiments illustrating the error behaviors are provided.© 2016 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 32: 1357–1377, 2016     

A lumped mass nonconforming finite element method for nonlinear parabolic integro-differential equations on anisotropic meshes

A lumped mass approximation scheme of a low order Crouzeix-Raviart type noncon- forming triangular finite element is proposed to a kind of nonlinear parabolic integro-differential equations. The L2 error estimate is derived on anisotropic meshes without referring to the traditional nonclassical elliptic projection.     

Reproducing kernel method to solve parabolic partial differential equations with nonlocal conditions

In this study, the parabolic partial differential equations with nonlocal conditions are solved. To this end, we use the reproducing kernel method (RKM) that is obtained from the combining fundamental concepts of the Galerkin method, and the complete system of reproducing kernel Hilbert space that was first introduced by Wang et al. who implemented RKM without Gram–Schmidt orthogonalization process. In this method, first the reproducing kernel spaces and their kernels such that satisfy the nonlocal conditions are constructed, and then the RKM without Gram–Schmidt orthogonalization process on the considered problem is implemented. Moreover, convergence theorem, error analysis theorems, and stability theorem are provided in detail. To show the high accuracy of the present method several numerical examples are solved.     

Parabolic finite volume element equations in nonconvex polygonal domains

We study spatially semidiscrete and fully discrete finite volume element approximations of the heat equation with homogeneous Dirichlet boundary conditions in a plane polygonal domain with one reentrant corner. We show that, as a result of the singularity in the solution near the reentrant corner, the convergence rate is reduced from optimal second order, similarly to what was shown for the finite element method in the earlier work 2 . Optimal order convergence may be restored by mesh refinement near the corners of the domain. © 2008 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2009     

H1‐Galerkin expanded mixed finite element methods for nonlinear pseudo‐parabolic integro‐differential equations

H¹‐Galerkin mixed finite element method combined with expanded mixed element method is discussed for nonlinear pseudo‐parabolic integro‐differential equations. We conduct theoretical analysis to study the existence and uniqueness of numerical solutions to the discrete scheme. A priori error estimates are derived for the unknown function, gradient function, and flux. Numerical example is presented to illustrate the effectiveness of the proposed scheme. © 2012 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2013     

Galerkin finite element approximation of symmetric space-fractional partial differential equations

In this paper, symmetric space-fractional partial differential equations (SSFPDE) with the Riesz fractional operator are considered. The SSFPDE is obtained from the standard advection-dispersion equation by replacing the first-order and second-order space derivatives with the Riesz fractional derivatives of order 2β ∈ (0, 1) and 2α ∈ (1, 2], respectively. We prove that the variational solution of the SSFPDE exists and is unique. Using the Galerkin finite element method and a backward difference technique, a fully discrete approximating system is obtained, which has a unique solution according to the Lax-Milgram theorem. The stability and convergence of the fully discrete schemes are derived. Finally, some numerical experiments are given to confirm our theoretical analysis.     

A two‐grid characteristic finite volume element method for semilinear advection‐dominated diffusion equations

A two‐grid finite volume element method, combined with the modified method of characteristics, is presented and analyzed for semilinear time‐dependent advection‐dominated diffusion equations in two space dimensions. The solution of a nonlinear system on the fine‐grid space (with grid size h) is reduced to the solution of two small (one linear and one nonlinear) systems on the coarse‐grid space (with grid size H) and a linear system on the fine‐grid space. An optimal error estimate in H¹ ‐norm is obtained for the two‐grid method. It shows that the two‐grid method achieves asymptotically optimal approximation, as long as the mesh sizes satisfy h = O(H²). Numerical example is presented to validate the usefulness and efficiency of the method. © 2013 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2013     

Two grid finite element discretization method for semi‐linear hyperbolic integro‐differential equations

In this paper, we will investigate a two grid finite element discretization method for the semi‐linear hyperbolic integro‐differential equations by piecewise continuous finite element method. In order to deal with the semi‐linearity of the model, we use the two grid technique and derive that once the coarse and fine mesh sizes H, h satisfy the relation h = H² for the two‐step two grid discretization method, the two grid method achieves the same convergence accuracy as the ordinary finite element method. Both theoretical analysis and numerical experiments are given to verify the results.     

Analysis of two‐grid discretization scheme for semilinear hyperbolic equations by mixed finite element methods

In this paper, the full discrete scheme of mixed finite element approximation is introduced for semilinear hyperbolic equations. To solve the nonlinear problem efficiently, two two‐grid algorithms are developed and analyzed. In this approach, the nonlinear system is solved on a coarse mesh with width H, and the linear system is solved on a fine mesh with width h≪H. Error estimates and convergence results of two‐grid method are derived in detail. It is shown that if we choose in the first algorithm and in the second algorithm, the two‐grid algorithms can achieve the same accuracy of the mixed finite element solutions. Finally, the numerical examples also show that the two‐grid method is much more efficient than solving the nonlinear mixed finite element system directly.     

B-splines methods with redefined basis functions for solving fourth order parabolic partial differential equations

In this work, we discuss two methods for solving a fourth order parabolic partial differential equation. In Method-I, we decompose the given equation into a system of second order equations and solve them by using cubic B-spline method with redefined basis functions. In Method-II, the equation is solved directly by applying quintic B-spline method with redefined basis functions. Stability of these methods have been discussed. Both methods are unconditionally stable. These methods are tested on four examples. The computed results are compared wherever possible with those already available in literature. We have developed Method-I for fourth order non homogeneous parabolic partial differential equation from which we can obtain displacement and bending moment both simultaneously, while Method-II gives only displacement. The results show that the derived methods are easily implemented and approximate the exact solution very well.     

Analysis of finite dimensional approximations to a class of partial differential equations

In this paper, a unified approach for analysing finite dimensional approximations to a class of partial differential equations boundary value problems (second‐kind Fredholm differential equations) is introduced. The approach is shown to be general despite of its extremely simple form. In particular, it is expected to be useful in the convergence analysis of finite element methods for solving PDE problems. Three specific examples are presented to illustrate the broad applicability of the approach. Copyright © 2004 John Wiley & Sons, Ltd.