In situ intercalative polymerization of conducting polypyrrole/montmorillonite nanocomposites

Conducting polypyrrole (PPy)‐montmorillonite (MMT) clay nanocomposites have been synthesized by the in situ intercalative polymerization method. The PPy‐MMT nanocomposites are characterized by field‐emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), ultraviolet–visible (UV–vis) spectroscopy, thermogravimetric analysis (TGA), and Fourier‐transform infrared (FTIR) spectroscopy. XRD patterns show that after polymerization by the in situ intercalative method with ammonium persulfate and 1 M HCl, an increase in the basal spacing from 1.2 to 1.9 nm was observed, signifying that PPy is synthesized between the interlayer spaces of MMT. TEM and SEM micrographs suggest that the coexistence of intercalated MMT layers with the PPy macromolecules. FTIR reveals that there might be possible interfacial interactions present between the MMT clay and PPy matrix. The study also shows that the introduction of MMT clay results in thermal stability improvement of the PPy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2279–2285, 2008     

Improved microwave absorption and electrostatic charge dissipation efficiencies of conducting polymer grafted fabrics prepared via in situ polymerization

Polyaniline (PANI) and polypyrrole (PPY) were grafted over cotton fabrics by in situ polymerization. FTIR spectra show systematic shifting of bands corroborating surface grafting of conducting polymers on cotton fabric. SEM images revealed that the surface coating of PANI was smoother than PPY. However, better control over coating thickness and uniformity was achieved in PPY fabric. The probable formation mechanism of grated fabrics has also been proposed. The good thermal stability and acceptable electronic conductivity values indicate that these fabrics could be used for electrostatic charge dissipation and microwave absorption. The antistatic studies have shown complete charge dissipation (decay time <0.01 sec). The microwave absorption studies of the conducting fabrics in X‐band (8.2–12.4 GHz) show absorption dominated total shielding effectiveness in the range ?11.3 to ?11.7 dB (>92% attenuation) and ?9.2 to ?9.6 dB (>88% attenuation) for fabrics grafted with PPY and PANI, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

Studies on stable aqueous poly(o-toluidine) prepared with the use of a water soluble support polymer,polyacrylamide

Polymerization of o-methylaniline or o-toluidine (OT) was studied in aqueous acidic (HCl) medium with or without the use of the support of a water soluble polymer, polyacrylamide (PAAm). Poly(o- toluidine) (POT) produced with PAAm support was in the form of aqueous solution or dispersion that showed high stability and good processibility. High degree of dispersion or near solubility and storage stability of POT thus prepared are explained on the basis of establishment of hydrogen bonding between segments of POT being formed and the PAAm present in the medium thus resulting in a template effect. Studies by UV-visible spectroscopy and FTIR spectroscopy lend support to this view. POT-PAAm composites commonly show higher thermal stability than POT and the composites show DC-electrical conductivities in the range of 10⁻⁹–10⁻¹ S · cm⁻¹ depending on the POT content. Morphological analysis of the optically clear aqueous POT-PAAm solution by transmission electron microscopy (TEM) shows the presence of large clusters of PAAm-supported near-spherical POT nanoparticles in the aqueous PAAm solution. Scanning electron microscopic (SEM) analysis of isolated POT-PAAm composites shows a cocontinuous phase morphology without any trend of gross phase separation. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3243–3256, 1999     

Electrochemical polymerization of aniline in phosphoric acid

The electrochemical synthesis of common conductive polymers such as polyaniline in phosphoric acid is a little different from that in other acidic media such as sulfuric acid. Electropolymerization in phosphoric acid is difficult, and this electrolyte medium is not applicable for this purpose. However, it is possible to overcome this problem by the addition of a small amount of sulfuric acid. In this case, the electropolymerization process can be successfully performed when the phosphate ion is doped. For instance, polyaniline films electrodeposited from an electrolyte solution of phosphoric acid have good stabilities and useful morphologies. Interestingly, phosphate doping results in the formation of nanostructures, whereas the polymer surface is macroscopically smooth. In an appropriate ratio, a mixed electrolyte of H₃PO₄ and H₂SO₄ can be used for the electropolymerization of aniline; thus, H₂SO₄ acts as a required agent for successful polymer growth, and H₃PO₄ acts as a doping agent. In this case, a small amount of sulfate is incorporated into the polymer matrix, which does not participate in the electrochemical insertion/extraction process. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3304–3311, 2006     

Growth of poly(3,4‐ethylenedioxythiophene) films prepared by base‐inhibited vapor phase polymerization

Transparent [90% transmittance at 550 nm at a sheet resistance (R_s) of 279 Ω sq^?1] poly(3,4‐ethylenedioxythiophene) (PEDOT) films with electrical conductivities up to 1354 S cm^?1 are prepared using base‐inhibited vapor phase polymerization at atmospheric pressure. The influence of reaction conditions, such as temperature and growth time, on the film formation is investigated. A simple and convenient two‐electrode method is used for the in situ measurement of resistance, enabling to investigate the growth mechanism of polymer films and the influence of different parameters (relative humidity and the amount of oxidant) on the film growth. Low humidity exerts a detrimental effect on film growth and conductivity. In situ R_s measurements suggest that a large structural change occurs upon washing the PEDOT‐oxidant film. © 2014 Wiley Periodicals, Inc. J Polym Sci Part B: Polym. Phys. 2014 , 52, 561–571     

Synthesis of conducting polypyrrole by radiolysis polymerization method

Conducting polypyrrole (PPy) has been synthesized by the in situ gamma radiation‐induced chemical oxidative polymerization method. This method takes advantages of the specialties of radiation‐induction, and a highly uniform polymer morphology was obtained. The resultant nanosize polypyrrole particles were characterized by Elemental Analysis, Fourier transform infrared (FT‐IR), scanning electron microscope (SEM), transmission electron microscopy (TEM) and X‐ray Diffraction (XRD). Measurements of polymer particle sizes were obtained at <500 nm. A standard four‐point probe revealed that the chemical synthesis of PPy has a good electrical property. Also thermal stability, checked by Thermal Gravimetric Analysis in air, was ensured by this novel synthesis. Copyright © 2007 John Wiley & Sons, Ltd.     

Electrical conductivity of poly(ethylene terephthalate)/expanded graphite nanocomposites prepared by in situ polymerization

Nanocomposites based on poly(ethylene terephthalate) (PET) and expanded graphite (EG) have been prepared by in situ polymerization. Morphology of the nanocomposites has been examined by electronic microscopy. The relationship between the preparation method, morphology, and electrical conductivity was studied. Electronic microscopy images reveal that the nanocomposites exhibit well dispersed graphene platelets. The incorporation of EG to the PET results in a sharp insulator‐to‐conductor transition with a percolation threshold (?_c) as low as 0.05 wt %. An electrical conductivity of 10^?3 S/cm was achieved for 0.4 wt % of EG. The low percolation threshold and relatively high electrical conductivity are attributed to the high aspect ratio, large surface area, and uniform dispersion of the EG sheets in PET matrix. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Precipitation polymerization of aniline in the presence of water‐soluble organic acids

The precipitation polymerization of aniline in the presence of organic acids, including toluene‐4‐sulfonic acid, phenylphosphonic acid, 4‐aminophenylphosphonic acid, and acetophosphonic acid, led in one step to conductive polyaniline. The polyaniline showed very good affinity for water and was easily modified to be water‐soluble. In comparison with the widely studied postpolymerization of doped polyaniline, this reaction allowed reasonably good conductivity to be achieved at a lower acid/polyaniline ratio. Moreover, the easy in situ incorporation of the dopant into the polymer structure caused high stability of the created salt; that is, no dedoping was observed after it was washed with water, methanol, or other solvents. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3562–3569, 2002     

End‐group composition of poly(3‐hexylthiophene)s prepared by in situ quenching of the grignard metathesis polymerization: Influence of additives and reaction conditions

The ability to prepare well‐defined semiconducting polymers is essential for understanding the link between structure and function in organic photovoltaic devices. A general, one‐pot method for altering the degree of functionality of end‐functionalized poly(3‐hexylthiophene)s (P3HT) prepared by Grignard metathesis (GRIM) polymerization has been developed. In the absence of additives, the degree of functionality of end‐functional P3HTs prepared by quenching of the GRIM polymerization with a Grignard reagent is dependent on the Grignard reagent utilized. In this study, additives such as styrene and 1‐pentene are shown to alter the end‐group composition of tolyl‐functionalized P3HTs as determined by Matrix‐assisted Laser Desorption Ionization Time‐of‐flight Mass Spectrometry. In particular, when quenching the GRIM polymerization with tolylmagnesium bromide, a modest decrease in the difunctional product is observed, and the yield of the monofunctional product increases significantly. Temperature and lithium chloride (LiCl) addition also play impactful roles. Monofunctional P3HT is found to be the major product (72% abundance) when the functionalization is done in the presence of LiCl and styrene at 0 °C, whereas in the absence of additives the monofunctional product is present at only 11% abundance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

In situ polymerization of aniline in electrospun microfbers简

Conductive microfibers with an average diameter of ca. 1.0 mm were prepared by in situ polymerization of aniline, in which poly(vinylchloride-acrylonitrile)(PVC-AN) was used as the filament-material in electrospinning to form precursor microfibers and carry the aniline monomers. Fourier-transform infrared(FTIR) results demonstrated that PANi was successfully polymerized in the microfibers. The morphology of the PVC-AN-PANi microfibers was observed by scanning electron microscopy(SEM). Results of differential scanning calorimetry indicated that the polymer composite of PVC-AN-PANi formed via molecular interactions. Although the conductivity of PVC-AN-PANi microfibers was still limited(2.2 fi 10à8S/cm), this method provided an effective and convenient approach for preparing highly uniform and soft microfibrous electrodes.     

Transport properties of aluminophosphate nanocomposite membranes prepared by in situ polymerization

Nanocomposite membranes containing 5 wt% microporous layered aluminophosphate in a polymer matrix were fabricated using in situ polymerization. The gas transport properties of these membranes were evaluated. Polyetherimide was combined with aluminophosphate swelled with several different surfactants. The glass transition temperature of these membranes increased as a result of adding the layered aluminophosphate, however, gas pair selectivity was not improved. A second experiment involved the addition of as-synthesized layered aluminophosphate, which was ball milled to small sizes, to a linear and branched polyimide based on 4,4′-oxydiphthalic anhydride (ODPA), 2,4,6-triaminopyrimidine (TAP), and 4,4′-oxydianiline (ODA) via in situ polymerization. In some cases the gas pair selectivities were improved as a result of adding the layered aluminophosphate. DMTA data suggest no mechanical enhancement with the addition of AlPO, which means that the layers were likely not exfoliated. For this reason, it is most likely that the selectivity enhancements in these samples were not due to molecular sieving through the microstructure of the aluminophosphate.     

Comparative study on the enzymatic polymerization of N‐substituted aniline derivatives

A series of water‐soluble N‐substituted poly(alkylanilines) (PNAAs) have been enzymatically synthesized with a variety of groups, from methyl to n‐butyl, such as poly(N‐methylaniline), poly(N‐ethylaniline), poly(N‐butylaniline) and poly(N‐phenylethanolamine). The syntheses were made in the presence of poly(4‐sodium styrene sulfonate) (SPS) as a template and horseradish peroxidase (HRP) as a catalyst. The size and type of the groups have a great effect on the properties of the final polymers. UV‐vis spectroscopy and cyclic voltammetry measurements confirmed that for enzymatically synthesized PNAAs/SPS complexes, the electroactivity increased with the bulkiness of the substituents. These polymers have been studied in the doped and undoped states by FT‐IR and UV‐vis spectroscopy. Also these polymers show multiple and reversible optical transitions that can be ascribed to the formation of polaron and bipolaron states. Copyright © 2005 John Wiley & Sons, Ltd.     

Polyurethane‐nanocomposite materials via in situ polymerization into organoclay interlayers

New nanocomposite materials based on polyurethane intercalated into organoclay layers have been synthesized via in situ polymerization. The syntheses of polyurethane–organoclay hybrid films were carried out by swelling the organoclay [12‐aminododecanoic acid montmorillonite] into different kinds of diols followed by addition of diisocyanate then casting in a film. The homogeneous dispersion of MMT in the polymer matrix is evidenced by scanning electron microscope and x‐ray diffraction, which showed the disappearance of the peak characteristic to d₀₀₁ spacing. It was found that the presence of organoclay has improved the thermal, solvent resistance and mechanical properties. Also, the tensile strength is increased with increasing the organoclay contents to 20% by the ratio 182% related to the PU with 0% organoclay. On the contrary, the elongation has decreased with increasing the organoclay contents. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of a water‐soluble diblock copolymer of polysulfonic diphenyl aniline and poly(ethylene oxide)

We report the synthesis of a water‐soluble diblock copolymer composed of polysulfonic diphenyl aniline (PSDA) and poly(ethylene oxide) (PEO), which was prepared by reacting an amine‐terminated PSDA and tosylate PEO (PEO‐Tos). First, a HCl‐mediated polymerization of sulfonic diphenyl aniline monomer with the formation of HCl‐doped PSDA was carried out. After its neutralization and reduction, a secondary amine‐functionalized PSDA was obtained. Second, PEO‐Tos was synthesized via the tosylation of the monohydroxyl PEO methyl ether with tosylol chloride. Diblock copolymers with various PEO segment lengths (PSDA‐b‐PEO‐350 and PSDA‐b‐PEO‐2000) were obtained with PEO‐350 [number‐average molecular weight (M_n) = 350] and PEO‐2000 (M_n = 2000). The prepolymers and diblock copolymers were characterized by Fourier transform infrared spectroscopy, NMR, mass spectrometry, and ultraviolet–visible light. They had relatively low conductivities, ranging from 10^?6 to 10^?3 S/cm, because of the withdrawing effect of the sulfonic group as well as the steric effects of the bulky aromatic substitutuents at the N sites of the polyaniline backbone and of the PEO block. These polymers were self‐doped, and an intermolecular self‐doping was suggested. The external doping was, however, more effective. The self‐doping induced aggregation in water among the PSDA backbones, which was also stimulated by the presence of hydrophilic PEO blocks. Furthermore, the electrical conductivities of the diblock copolymers were strongly temperature‐dependent. PSDA‐b‐PEO‐2000 exhibited about one order of magnitude increase in conductivity upon heating from 32 to 57 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2179–2191, 2004     

Electrochemically initiated chain polymerization of pyrrole in aqueous media

The electrochemical quartz crystal microbalance has been employed to investigate the electropolymerization of pyrrole in a variety of aqueous electrolytes. In contrast to the generally accepted cation–radical coupling process for the electropolymerization of pyrrole, an electrochemically initiated chain polymerization, featuring a high polymerization rate and involving little charge transport, was found under specific conditions in the presence of ClO^?₄, BF^?₄, and PF^?₆ electrolytes. The more typical cation-radical coupling mechanism, characterized by a constant polymerization charge to mass deposited ratio, is observed in the presence of Cl^?, NO^?₃, dodecyl sulfate, copper phthalocyanine tetrasulfonate, β-cyclodextrin tetradecasulfate, and poly(styrene sulfonate). Electrochemical characterizations of polypyrrole films prepared in aqueous ClO^?₄ electrolytes reveal that the polymer formed via chain polymerization exhibits the ability to transport both cations and anions during electrochemical switching between redox states, while the polymer synthesized through cation-radical coupling is only capable of transporting a single ionic species.     

Synthesis of polybenzoxazine/clay nanocomposites by in situ thermal ring‐opening polymerization using intercalated monomer

A new class of polybenzoxazine/montmorillonite (PBz/MMT) nanocomposites has been prepared by the in situ polymerization of the typical fluid benzoxazine monomer, 3‐pentyl‐5‐ol‐3,4‐dihydro‐1,3‐benzoxazine, with intercalated benzoxazine MMT clay. A pyridine‐substituted benzoxazine was first synthesized and quaternized by 11‐bromo‐1‐undecanol and then used for ion exchange reaction with sodium ions in MMT to obtain intercalated benzoxazine clay. Finally, this organomodified clay was dispersed in the fluid benzoxazine monomers at different loading degrees to conduct the in situ thermal ring‐opening polymerization. Polymerization through the interlayer galleries of the clay led to the PBz/MMT nanocomposite formation. The morphologies of the nanocomposites were investigated by both X‐ray diffraction and transmission electron microscopic techniques, which suggested the partially exfoliated/intercalated structures in the PBz matrix. Results of thermogravimetric analysis confirmed that the thermal stability and char yield of PBz nanocomposites increased with the increase of clay content. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of polypyrrole/graphite oxide composite by in situ emulsion polymerization

This work demonstrates a feasible route to synthesize the layered polypyrrole/graphite oxide (PPy/GO) composite by in situ emulsion polymerization in the presence of cationic surfactant cetyltrimethylammonium bromide (CTAB) as emulsifier. AFM and XRD results reveal that the GO can be delaminated into nanosheets and well dispersed in aqueous solution in the presence of CTAB. The PPy nanowires are formed due to the presence of the lamellar mesostructured (CTA)₂S₂O₈ as a template. The results of the PPy/GO composite indicate the PPy insert successfully into GO interlayers, and the nanofiber‐like PPy are deposited onto the GO surface. Owing to π–π electron stacking effect between the pyrrole ring of PPy and the unoxided domain of GO sheets, the electrical conductivity of PPy/GO composite (5 S/cm) significantly improves in comparison with pure PPy nanowires (0.94 S/cm) and pristine GO (1 × 10^?6 S/cm). © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1329–1335, 2010     

Conducting poly(aniline) nanotubes and nanofibers: controlled synthesis and application in lithium/poly(aniline) rechargeable batteries

The primary aim of this work was to synthesize aligned perchloric-acid-doped poly(aniline) (HClO(4)-doped PANI) nanotubes by a simple alumina template method and to investigate their application in lithium/poly(aniline) rechargeable batteries. Powder X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier transform infrared (FTIR) analysis were used to characterize the nanostructures obtained. The second aim addressed the preparation of HClO(4)-doped PANI microspheres and nanofibers on a large scale through a modified spraying technique, since the template synthesis has limitations in mass production. The present synthesis methods are simple and can be extended to the preparation of a broad range of one-dimensional conductive polymers. Furthermore, electrochemical measurements showed that the as-prepared HClO(4)-doped PANI nanotubes exhibit better electrode performances than their commercial counterparts because they possess more active sites, higher conductivity, and relative flexibility. This indicates that HClO(4)-doped poly(aniline) nanomaterials are promising in the application of lithium/polymer rechargeable batteries.     

Characterization of DNA immobilized on electrochemically prepared conducting polypyrrole-polyvinyl sulfonate films

The article describes the adsorption characteristics of DNA onto electrochemically generated polypyrrole-polyvinyl sulfonate (PPY-PVS) films obtained as a function of pH. Adsorption on PPY doped with an anion proceeds by anion exchange, and since DNA possesses a fixed negative charge owing to PO ₄ ⁻ , it favors a very strong binding displacing PVS with favorable energetic interactions. Characterization of adsorbed DNA onto the PPY-PVS films was carried out by ultraviolet-visible, Fourier transform infrared spectroscopy, and cyclic voltammetric studies.     

Syntheses and characterizations of aniline/butylthioaniline copolymers: Comparisons of copolymers prepared by the new concurrent reduction and substitution route and the conventional oxidative copolymerization method

New highly solution‐processable aniline/butylthioaniline copolymers were prepared via oxidative copolymerization (OCP) and by concurrent reduction and substitution (CRS). Butylthio‐substituted polyaniline obtained via the CRS route (Pan‐SBu), being in line with the expected property changes after the addition of an electron‐donating substituent to an aromatic ring, displayed a lowered redox potential (E⁰) and a redshifted maximum wavelength (λ_max; ultraviolet–visible) in comparison with its parent unsubstituted polyaniline (Pan). However, copolymers CP1–CP4 (obtained via the OCP method) displayed opposite behaviors, showing higher E⁰ values and blueshifts in λ_max than the unsubstituted Pan. The results suggested that CP1–CP4 had shorter conjugation lengths than the unsubstituted Pan, possibly because of their chain conjugation defects (e.g., 1,3‐ring linkage structures), as evidenced by IR studies. The results of ¹H NMR studies also indicated that Pan‐SBu had much higher structural homogeneity than copolymer CP4. Because the CRS synthetic route involved no backbone alternations, the resultant copolymer (Pan‐SBu) should have maintained the same backbone structure and hence the high conductivity of the parent unsubstituted Pan. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1767–1777, 2005