Modification of properties of ion-exchange membranes. IV. Change of transport properties of cation-exchange membranes by various polyelectrolytes

A change in electrodialytic transport properties of various cation exchange membranes was observed after the membranes had been adsorbed or ion-exchanged with various cationic polyelectrolytes. Transport properties measured in this report were the relative transport number of calcium ion to sodium ion P^Ca_Na, the current efficiency of cations, and the electric resistance of the membrane during the electrodialysis. Weakly basic and strongly basic cationic polyelectrolytes of various molecular weights were used. Though P^Ca_Na of any cation exchange membrane decreased by the adsorption or ion exchange of any cationic polyelectrolyte, the degree of the decrease in P^Ca_Na changed with species and molecular weight of polyelectrolytes and species of cation-exchange membranes. Weakly basic polyelectrolytes and low molecular weight, strongly basic polyelectrolytes were effective in producing a marked decrease in P^Na_Ca of any cation exchange membrane. The effect of strongly basic polyelectrolytes of high molecular weight on P^Ca_Na was weak in most cases. However, if it was possible to make the polyelectrolyte adhere to the surface of the membrane to form a compact coiled structure, any cationic polyelectrolyte was effective in producing a remarkable decrease in P^Ca_Na of any cation-exchange membrane.     

Understanding E2 versus SN2 Competition under Acidic and Basic Conditions

Our purpose is to understand the mechanism through which pH affects the competition between base-induced elimination and substitution. To this end, we have quantum chemically investigated the competition between elimination and substitution pathways in H₂O+C₂H₅OH₂⁺ and OH⁻+C₂H₅OH, that is, two related model systems that represent, in a generic manner, the same reaction under acidic and basic conditions, respectively. We find that substitution is favored in the acidic case while elimination prevails under basic conditions. Activation-strain analyses of the reaction profiles reveal that the switch in preferred reactivity from substitution to elimination, if one goes from acidic to basic catalysis, is related to (1) the higher basicity of the deprotonated base, and (2) the change in character of the substrates LUMO from C^β−H bonding in C₂H₅OH₂⁺ to C^β−H antibonding in C₂H₅OH.     

Interactions between apolar,basic and acidic model oils and a calcite surface

Abstract

In this study, the atomic force microscopy colloidal probe technique was employed to investigate the interaction between apolar, basic and acidic model oil probes and a calcite surface in solutions containing different concentrations of NaCl, CaCl₂ and Na₂SO₄. In the presence of SO₄^2?, hydration and structural forces were observed between apolar model oil probes and a calcite surface on approach. Relatively low adhesion forces were observed between the basic model oil probes and the calcite surface, while higher adhesion forces were observed between the acidic model oil probes and the calcite surface. Furthermore, the adhesion forces between the basic model oil probes and the calcite surface significantly increased in the presence of SO₄^2?, while the adhesion force between the acidic model oil probes and the calcite surface decreased in the presence of Ca²⁺ or SO₄^2?. The differences in the adhesion forces are related to electrostatic attraction and ion bridging forces between the model oil probes and the calcite surface.     

Über basische Aluminiumsalze und ihre Lösungen. XI. Vergleichende 27Al-NMR-Untersuchungen am Mineral Zunyit und basischen Aluminium-Salzen mit tridekameren Al-oxo-hydroxo-aquo-Kationen

Basic Aluminium Salts and their Solutions. XI. ²⁷Al-NMR Studies Comparing the Mineral Zunyite and Basic Aluminium Salts of Tridecameric Al-oxo-hydroxo-aquo-Cations Solid-state high resolution ²⁷Al NMR studies of basic aluminum sulphate and the mineral zunyite, both containing tridecameric Al-oxo-hydroxo groups, show different ²⁷Al spectra. While for zunyite both AlO₆ octahedra (0 ppm) and the central AlO₄ tetrahedron (69 ppm) are observed in the spectrum, in the case of the basic aluminum sulphate only the tetrahedrally coordinated Al (59 ppm) is detected by NMR. This behaviour is explained by structural data, which indicate stronger distortions of the AlO₆ octahedra in the case of the basic aluminum sulphate. The increased shielding of the fourcoordinated Al of the basic sulphate is attributed to an increased ionic character of the Al? O bond in this compound.     

Spectroscopic detection of free “lone-pair” groups or terminal methanol molecules in methanol solutions

When basic aprotic solvents are added to methanol they become hydrogen bonded, and there is a consequent growth in non-bonded lone-pairs, (LP)_free. Although corresponding non-bonded OH groups, (OH)_free, have been detected for alcohols and for water, using overtone infrared spectroscopy, no different spectroscopic evidence for (LP)_free groups has previously been reported. We have found that unique OH stretching bands develop when strongly basic solvents such as dimethylsulphoxide are added to methanol. Band maxima assigned to (LP)_free groups occur at 3440 cm^?1 in the fundamental and 6790 cm^?1 in the overtone region. These are at considerably higher frequencies than those for bulk methanol (3340 cm^?1 and 6600 cm^?1) showing that the hydrogen bond is weakened in this unit, as expected. Proton resonance shifts for the OH protons of methanol on adding basic aprotic cosolvents are reported, and explained in terms of these results.     

The Effect of Moisture on the Hydrolysis of Basic Salts

A great deal of information exists concerning the hydration of ions in bulk water. Much less noticeable, but equally ubiquitous is the hydration of ions holding on to several water molecules in nanoscopic pores or in natural air at low relative humidity. Such hydration of ions with a high ratio of ions to water molecules (up to 1:1) are essential in determining the energetics of many physical and chemical systems. Herein, we present a quantitative analysis of the energetics of ion hydration in nanopores based on molecular modeling of a series of basic salts associated with different numbers of water molecules. The results show that the degree of hydrolysis of basic salts in the presence of a few water molecules is significantly different from that in bulk water. The reduced availability of water molecules promotes the hydrolysis of divalent and trivalent basic ions (S₂^?, CO₃^2?, SO₃^2?, HPO₄^2?, SO₄^2?, PO₄^3?), which produces lower valent ions (HS^?, HCO₃^?, HSO₃^?, H₂PO₄^?, HSO₄^?, HPO₄^2?) and OH^?ions. However, reducing the availability of water inhibits the hydrolysis of monovalent basic ions (CN^?, HS^?). This finding sheds some light on a vast number of chemical processes in the atmosphere and on solid porous surfaces. The discovery has wide potential applications including designing efficient absorbents for acidic gases.     

Electrochemical studies of iodine in an aluminium chloride-butylpyridinium chloride ionic liquid part II. Neutral and basic solvent composition

The electrochemical behavior of iodine in an ambient temperature molten salt system, aluminum chloride-N-(1-butyl)pyridinium chloride (BuPyCl), have been studied in basic (excess BuPyCl) and neutral (1.0:1.0 AlCl₃: BuPyCI mole ratio) melt compositions. Acid-base interactions of iodine in different oxidation states with the ionic solvent are observed. High stability of triiodide ion in neutral butylpyridinium tetrachloroaluminate indicates relatively weak intermolecular interactions in this solvent. In basic solutions polyhalogen equilibria involving iodine in different oxidation states and chloride ions are established. In iodine and tetraethylammonium triiodide solutions a mixture of ICI₂^?, I₂Cl^?, I₃^? and I^? ions forms. The formation constants of I₂Cl^? and I₃^? and the equilibrium constant for I₂Cl^? disproportionation are estimated.     

Anion Receptors Containing ‐NH Binding Sites: Hydrogen‐Bond Formation or Neat Proton Transfer?

When the amide‐containing receptor 1 ⁺ is in a solution of dimethyl sulfoxide (DMSO) in the presence of basic anions (CH₃COO^?, F^?, H₂PO₄^?), it undergoes deprotonation of the ‐NH fragment to give the corresponding zwitterion, which can be isolated as a crystalline solid. In the presence of less basic anions (Cl^?, Br^?, NO₃^?), 1 ⁺ establishes true hydrogen‐bond interactions of decreasing intensity. The less acidic receptor 2 ⁺ undergoes neat proton transfer with only the more basic anions CH₃COO^? and F^?, and establishes hydrogen‐bond interactions with H₂PO₄^?. An empirical criterion for discerning neutralisation and hydrogen bonding, based on UV/Vis and ¹H NMR spectra, is proposed.     

Basic [Au25(SCH2CH2Py)18]−⋅Na+ Clusters: Synthesis,Layered Crystallographic Arrangement,and Unique Surface Protonation

The synthesis of high‐purity and high‐yield Au₂₅ clusters protected by the basic pyridyl ethanethiol (HSCH₂CH₂Py, 4‐PyET and 2‐PyET) is presented. Single‐crystal X‐ray diffraction of the [Au₂₅(4‐PyET)₁₈]^??Na⁺ clusters has revealed a structure similar to that known for the phenyl ethanethiolate analogue, but with pyridyl‐N coordination to Na⁺, a more relaxed ligand shell, and a profoundly layered arrangement in the solid state. Because of the pendant Py moiety, the [Au₂₅(PyET)₁₈]^? clusters are endowed with unique (de)protonation equilibria, which has been characterized in detail by UV/Vis absorption and ¹H NMR spectroscopy. [Au₂₅(PyET)₁₈]^? clusters showed an unexpectedly H⁺‐dependent solubility that is tunable in aqueous and organic solvents. The successful synthesis of the basic Py‐terminated thiolate‐protected Au₂₅ clusters paves the way to realize a new family of metalloid clusters possessing basic properties.     

A comparison of positive and negative ion collision‐induced dissociation for model heptapeptides with one basic residue

The effects of the identity and position of basic residues on peptide dissociation were explored in the positive and negative modes. Low‐energy collision‐induced dissociation (CID) was performed on singly protonated and deprotonated heptapeptides of the type: XAAAAAA, AAAXAAA, AAAAAXA and AAAAAAX, where X is arginine (R), lysine (K) or histidine (H) residues and A is alanine. For [M + H]⁺, the CID spectra are dominated by cleavages adjacent to the basic residues and the majority of the product ions contain the basic residues. The order of a basic residue's influence on fragmentation of [M + H]⁺ is arginine > histidine ≈ lysine, which is also the order of decreasing gas‐phase basicity for these amino acids. These results are consistent with the side chains of basic residues being positive ion charge sites and with the more basic arginine residues having a higher retention (i.e. sequestering) of the positive charge. In contrast, for [M ? H]^? the identity and position of basic residues has almost no effect on backbone fragmentation. This is consistent with basic residues not being negative mode charge sites. For these peptides, more complete series of backbone fragments, which are important in the sequencing of unknowns, can be found in the negative mode. Spectra at both polarities contain C‐terminal y‐ions, but y_n″⁺ has two more hydrogens than the corresponding y_n^?. Another major difference is the production of the N‐terminal backbone series b_n⁺ in the positive mode and c_n^? in the negative mode. Thus, comparison of positive and negative ion spectra with an emphasis on searching for pairs of ions that differ by 2 Da (y_n″⁺ vs y_n^?) and by 15 Da (b_n⁺ vs c_n^?) may be a useful method for determining whether a product ion is generated from the C‐terminal or the N‐terminal end of a peptide. In addition, a characteristic elimination of NH?C?NH from arginine residues is observed for deprotonated peptides. Copyright © 2010 John Wiley & Sons, Ltd.     

Basic [Au25(SCH2CH2Py)18]−⋅Na+ Clusters: Synthesis,Layered Crystallographic Arrangement,and Unique Surface Protonation

The synthesis of high‐purity and high‐yield Au₂₅ clusters protected by the basic pyridyl ethanethiol (HSCH₂CH₂Py, 4‐PyET and 2‐PyET) is presented. Single‐crystal X‐ray diffraction of the [Au₂₅(4‐PyET)₁₈]^??Na⁺ clusters has revealed a structure similar to that known for the phenyl ethanethiolate analogue, but with pyridyl‐N coordination to Na⁺, a more relaxed ligand shell, and a profoundly layered arrangement in the solid state. Because of the pendant Py moiety, the [Au₂₅(PyET)₁₈]^? clusters are endowed with unique (de)protonation equilibria, which has been characterized in detail by UV/Vis absorption and ¹H NMR spectroscopy. [Au₂₅(PyET)₁₈]^? clusters showed an unexpectedly H⁺‐dependent solubility that is tunable in aqueous and organic solvents. The successful synthesis of the basic Py‐terminated thiolate‐protected Au₂₅ clusters paves the way to realize a new family of metalloid clusters possessing basic properties.     

Unique catalysis of Ni-Al hydrotalcite derived catalyst in CO2 methanation: cooperative effect between Ni nanoparticles and a basic support

Ni-Al hydrotalcite derived catalyst (Ni-Al₂O₃-HT) exhibited a narrow Ni particle-size distribution with an average particle size of 4.0 nm. Methanation of CO₂ over this catalyst initiated at 225 °C and reached 82.5% CO₂ conversion with 99.5% CH₄ selectivity at 350 °C, which was much better than its impregnated counterpart. Characterizations by means of CO₂ microcalorimetry and ²⁷Al NMR indicated that large amount of strong basic sites existed on Ni-Al₂O₃-HT, originated from the formation of Ni-O-Al structure. The existence of strong basic sites facilitated the activation of CO₂ and consequently promoted the activity. The combination of highly dispersed Ni with strong basic support led to its unique and high efficiency for this reaction.     

Electrochemistry of tellurium(IV) in KCl−AlCl3 melts

The reduction of Te(IV) at tungsten electrodes in basic and neutral KCl?AlCl₃ melts has been studied in the temperature range from 300 to 400°C using cyclic voltammetry and differential pulse polarography. In basic melts Te(IV), present as TeCl₆^2? and TeCl₅^?, is reduced to soluble Te(II) species, which can be further reduced to elementary tellurium insoluble in tungsten. The divalent species are stabilized by increasing the temperature. From the pCl^? dependence of the reduction process, Te(II) in basic melts is suggested to be present as TeCl₃^? and TeCl₂. In neutral melts a third oxidation state (possibly monovalent tellurium) is formed when Te(II) is reduced.     

Germyliumylidene: A Versatile Low Valent Group 14 Catalyst

Bis-NHC stabilized germyliumylidenes [RGe(NHC)₂]⁺ are typically Lewis basic (LB) in nature, owing to their lone pair and coordination of two NHCs to the vacant p-orbitals of the germanium center. However, they can also show Lewis acidity (LA) via Ge−C^NHC σ* orbital. Utilizing this unique electronic feature, we report the first example of bis-NHC-stabilized germyliumylidene [^MesTerGe(NHC)₂]Cl ( 1 ), (^MesTer=2,6-(2,4,6-Me₃C₆H₂)₂C₆H₃; NHC= IMe₄=1,3,4,5-tetramethylimidazol-2-ylidene) catalyzed reduction of CO₂ with amines and arylsilane, which proceeds via its Lewis basic nature. In contrast, the Lewis acid nature of 1 is utilized in the catalyzed hydroboration and cyanosilylation of carbonyls, thus highlighting the versatile ambiphilic nature of bis-NHC stabilized germyliumylidenes.     

Effects of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> on the crystallization and structure of CaO–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> glass ceramics

Radiation-induced degradation of the weakly and strongly 4-vinylpyridine basic ion exchange resins by gamma radiolysis was investigated in the presence of air and liquid water. This study is focused on evaluating the radiolytic gases (H₂, CO, CO₂ and CH₄) and liquid products (water-solute TOC and NH₄ ⁺). The weakly basic resin yielded lower amounts of H₂ and CO and higher amounts of CO₂ than those of the strongly basic resin. Moreover, the strong basic resin tended to yield greater amounts of NH₄ ⁺. Resins were characterized by the FTIR spectroscopy technique and the results showed that the resins structures are relatively stable.     

Raman Spectroscopic Study of Aluminum Silicate Complexes at 20°C in Basic Solutions

Raman spectroscopic measurements were performed at ambient temperature onaqueous silica-bearing solutions (0.005 < m _Si < 0.02; 0 < pH < 14). The spectraare consistent with the formation of monomeric Si(OH)^o ₄, SiO(OH)^– ₃ andSiO₂(OH)^2– ₂ species at acid to neutral, basic, and strongly basic pH, respectively.Raman spectra of aqueous Al-bearing solutions at basic pH confirm thepredominance of the Al(OH)^– ₄ species in a wide concentration range (0.01 < m _Al < 0.1).Raman spectra of basic solutions (12.4 < pH < 14.3), containing both Al andSi, exhibit a strong decrease in intensities of SiO(OH)^– ₃, SiO₂(OH)^2– ₂, andAl(OH)^– ₄ bands in comparison with Al-free Si-bearing and Si-free Al-bearingsolutions of the same metal concentration and pH, suggesting the formation ofsoluble Al—Si complexes. The amounts of complexed Al and Si derived fromthe measurements of the Al and Si band intensities in strongly basic solutions(pH 14) are consistent with the formation, between Al(OH)^– ₄ andSiO₂(OH)^2– ₂, of the single Al—Si dimer SiAlO₃(OH)^3– ₄ according to the reactionSiO₂(OH)^2– ₂ + Al(OH)^– ₄ SiAlO₃(OH)^3– ₄ + H₂OAt lower pH ( 12.5) the changes in band intensities are consistent with theformation of several, likely more polymerized, Al—Si complexes.     

Miniature rotating disk electrode

The dissolution and dissociation of BaCO₃ in NaAlCl₄ at 175°C have been investigated by Raman spectroscopy of CO₂ in the gas phase. It has been shown that the dissociation of CO₃^2? is complete even in basic melts. Furthermore, the acidity of Ba²⁺ has been shown, and this explains previous determinations of O^2? basicity.     

Influence of basic residues on dissociation kinetics and dynamics of singly protonated peptides: time‐resolved photodissociation study

Product ion yields in postsource decay and time‐resolved photodissociation at 193 and 266 nm were measured for some peptide ions with lysine ([KF₆ + H]⁺, [F₆K + H]⁺, and [F₃KF₃ + H]⁺) formed by matrix‐assisted laser desorption ionization. The critical energy (E₀) and entropy (ΔS^?) were determined by RRKM fitting of the data. The results were similar to those found previously for peptide ions with histidine. To summarize, the presence of a basic residue, histidine or lysine, inside a peptide ion retarded its dissociation by lowering ΔS^?. On the basis of highly negative ΔS^?, presence of intramolecular interaction involving a basic group in the transition structure was proposed. Copyright © 2009 John Wiley & Sons, Ltd.     

Spectroscopic studies on the inclusion interaction of p-sulfonatocalix[6]arene with vitamin B6

The formation of the inclusion complex of p-sulfonatocalix[6]arene (SCX6) with different forms of vitamin B₆ (VB₆) was studied by using fluorescence spectroscopy. VB₆ can exist in one of three forms (the acidic form, neutral zwitterionic form and basic form) depending on pH. The fluorescence intensities of acidic and basic forms of VB₆ remarkably decreased in presence of SCX6. SCX6 preferred to form 1:1 inclusion complexes with acidic and basic forms of VB₆ but hardly form inclusion complex with neutral zwitterionic form. According to the nonlinear curve fitting method, the inclusion constant (K) for the formation of inclusion complexes of acidic and basic forms of VB₆ with SCX6 were evaluated to be 1.4?×?10⁴ and 9?×?10³ L/mol, respectively. The binding affinity of SCX6 towards acidic form is attributed to hydrogen bonds and hydrophobic interaction, furthermore, additional electrostatic interaction also plays a crucial role. The possible inclusion mode was given by ¹H NMR technique.     

Catalytic Stereoselective 1,4‐Addition Reactions Using CsF on Alumina as a Solid Base: Continuous‐Flow Synthesis of Glutamic Acid Derivatives

A novel methodology using CsF⋅Al₂O₃ as a highly efficient, environmentally benign, and reusable solid‐base catalyst was developed to synthesize glutamic acid derivatives by stereoselective 1,4‐addition of glycine derivatives to α,β‐unsaturated esters. CsF⋅Al₂O₃ showed not only great selectivity toward 1,4‐addtion reactions by suppressing the undesired formation of pyrrolidine derivations by [3+2] cycloadditions, but also offered high yields for the 1,4‐adduct with excellent anti diastereoselectivities. The catalyst was well characterized by using XRD, ¹⁹F MAS‐NMR and ¹⁹F NMR spectroscopy, FT‐IR, CO₂‐TPD, and XPS. And highly basic F from Cs₃AlF₆ was identified as the most probable active basic site for the 1,4‐addition reactions. Continuous‐flow synthesis of 3‐methyl glutamic acid derivative was successfully demonstrated by using this solid‐base catalysis.