Synthesis of novel polybenzimidazoles with pendant amino groups and the formation of their crosslinked membranes for medium temperature fuel cell applications

A series of new polybenzimidazoles (PBIs) with pendant amino groups have been synthesized via condensation polymerization of 5‐aminoisophthalic acid (APTA), isophthalic acid (iPTA), and 3,3′diaminobenzidine (DAB) in polyphosphoric acid at 190 °C for 20 h. The molar ratios between APTA and iPTA were controlled at 1:0, 2:1, 1:1, and 1:2, respectively, and the copolymerization reactions were carried out via both random and sequenced manners. The resulting polymers showed good solubility in some organic solvents such as dimethylsulfoxide (DMSO) and N,N‐dimethylacetamide (DMAc). The pendant amino groups of the PBIs were utilized to react with two kinds of crosslinkers, 1,3‐dibromopropane and ethylene glycol diglycidyl ether, to yield various crosslinked membranes. The crosslinked membranes generally showed good mechanical properties even at high‐phosphoric acid (PA) doping levels, whereas the uncrosslinked membranes highly swelled or even dissolved in PA. Fenton's test revealed that the crosslinked PBI membranes had excellent radical oxidative stability. The proton conductivities of the PA‐doped crosslinked membranes increased with an increase in temperature and high‐proton conductivity up to 0.14 S/cm at 0% relative humidity at 170 °C was achieved. The membranes with high PA‐doping levels, good mechanical properties, and high‐proton conductivities have been successfully developed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Synthesis and properties of aromatic poly(ester amide)s with pendant phosphorus groups

Two series of phosphorus‐containing aromatic poly(ester amide)s with inherent viscosities of 0.46–3.20 dL/g were prepared by low‐temperature solution polycondensation from 1,4‐bis(3‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene and 1,4‐bis(4‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene with various aromatic diacid chlorides. All the poly(ester amide)s were amorphous and readily soluble in many organic solvents, such as N,N‐dimethylformamide, N,N‐dimethylacetamide (DMAc), and N‐methyl‐2‐pyrrolidone (NMP). Transparent, tough, and flexible films of these polymers were cast from DMAc and NMP solutions. Their casting films had tensile strengths of 71–214 MPa, elongations to break of 5–10%, and initial moduli of 2.3–6.0 GPa. These poly(ester amide)s had glass‐transition temperatures of 209–239 °C (m‐series) and 222–267 °C (p‐series). The degradation temperatures at 10% weight loss in nitrogen for these polymers ranged from 462 to 489 °C, and the char yields at 800 °C were 55–63%. Most of the poly(ester amide)s also showed a high char yield of 35–45%, even at 800 °C under a flow of air. The limited oxygen indices of these poly(ester amide)s were 35–46. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 459–470, 2002; DOI 10.1002/pola.10129     

Synthesis and characterization of siloxane resins derived from silphenylene‐siloxane copolymers bearing benzocyclobutene pendant groups

Two bis(dimethylamimo)silanes with benzocyclobutene (BCB) groups, bis(dimethylamino)methyl(4′‐benzocyclobutenyl)silane ( 2 ) and bis(dimethylamino)methyl [2′‐(4′‐benzocyclobutenyl)vinyl]silane ( 4 ), were synthesized from different synthetic routes, which were then employed to prepare two novel silphenylene‐siloxane copolymers (SiBu and SiViBu) bearing latent reactive BCB groups by polycondensation procedure with 1,4‐bis(hydroxydimethylsilyl)benzene. At elevated temperatures these copolymers were readily converted to highly crosslinked films and molding disks with network structures by polymer chain crosslinking, which followed the first‐order kinetic reaction model. The final resins of SiBu and SiViBu demonstrated excellent thermal stability with high glass transition temperatures (218 and 256 °C) and high temperatures at 5% weight loss (553 and 526 °C in N₂, 530 and 508 °C in air). After aging at 300 °C in air for 100 h, the cured resins showed weight loss lower than 4%. The films of cured SiBu and SiViBu also exhibited relatively low dielectric constants of 2.66 and 2.64, low dissipation factors of 2.23 and 2.12 × 10^?3, low water absorptions (≤0.28%), and high transparence in the visible region with cutoff wavelengths of 321 and 314 nm. Moreover, the aged films exhibited good dielectric properties and low water absorptions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7868–7881, 2008     

Poly(arylene ether)s with pendant diphenyl phosphoryl groups: Synthesis,characterization, and thermal properties

A series of poly(arylene ether)s, (PAEs), carrying a pendant diphenyl phosphoryl group were prepared via the nucleophilic aromatic substitution (NAS) reactions of 3,5‐difluorotriphenylphosphine oxide, 6 . The difluoro monomer 6 was synthesized via two‐step reaction sequence and subsequently characterized by ¹H, ¹³C, ¹⁹F, and ³¹P NMR spectroscopy, GC/MS, and elemental analysis. The reactivity of the electrophilic sites in 6 , activated by only a diphenylphosphoryl group located in the meta‐position, in 6 was probed via NMR spectroscopy and model reactions and was determined to be sufficient to undergo typical NAS reactions. High molecular weight, amorphous, organic soluble poly(arylene ether)s, bearing a pendant diphenylphosphoryl group, were prepared via the reaction of 6 with a variety of bis‐phenols under typical NAS conditions. The poly(arylene ether)s were characterized for structure via the use of ¹H, ¹³C, and ³¹P NMR spectroscopy while their thermal properties were evaluated using DSC and TGA analysis. The glass transition temperatures (T_g) of the synthesized PAEs ranged from 143 to 175 °C, while their 5% weight loss temperatures ranged from 467 to 510 °C under nitrogen and from 470 to 526 °C in air. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of novel hyperbranched polybenzimidazoles based on an AB2 monomer containing four amino groups and one carboxylic group

A new kind of AB₂ monomer, 4‐[2,6‐bis(3,4‐diaminophenyl)pyridin‐4‐yl]benzoic acid, was synthesized, and several hyperbranched polybenzimidazoles (HPBIs) were prepared through self‐polymerization followed by modification reactions with end‐capping reagents such as 4‐methyl benzoic acid and 3‐[3,5‐bis(trifluoromethyl)phenoxy] benzoic acid. The HPBIs had good solubility in strongly aprotic solvents, such as N‐methyl‐2‐pyrrolidone, N,N′‐dimethylformamide, N,N′‐dimethylacetamide, and dimethyl sulfoxide. They also exhibited excellent thermal properties, with glass‐transition temperatures of 318–381 °C and 10% weight loss in the range of 338–674 °C in nitrogen and 329–509 °C in air. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5729–5739, 2006     

Synthesis of phenylquinoxaline oligomers containing pendant electron‐donating and electron‐withdrawing groups

A series of extended 6‐substituted quinoxaline AB monomer mixtures, 2‐(4‐fluorophenyl)‐3‐[4‐(4‐hydroxyphenoxy)phenyl]‐6‐substituted quinoxaline and 3‐(4‐fluorophenyl)‐2‐[4‐(4‐hydroxyphenoxy)phenyl]‐6‐substituted quinoxaline, were prepared and polymerized to afford phenylquinoxaline oligomers. High‐molecular‐weight polymers could not be obtained because of the formation of cyclic oligomers. On the basis of matrix‐assisted laser desorption/ionization time‐of‐flight analysis and molecular modeling results, the formation of a cyclic dimer could be a favorable process resulting in low‐molecular‐weight oligomers. They were completely soluble and amorphous, with glass‐transition temperatures varying from 165 to 266 °C, and they had thermooxidative stability, with samples displaying 5% weight loss temperatures of 419–511 °C in nitrogen. The thermal properties of the monomers and resultant polymers dramatically depended on the polarity of the substituents. The monomers and resultant oligomers displayed high fluorescence in tetrahydrofuran solutions and N‐methyl‐2‐pyrrolidinone solutions, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6465–6479, 2005     

Synthesis and characterization of aromatic polymers containing pendant silyl groups. I. Polyarylates

Polyarylates containing pendant silyl group were prepared by the phase-transfer catalyzed, two-phase polycondensations of 2,2-bis (4-hydroxyphenyl) propane with corresponding dicarbonyl chlorides such as 2-trimethylsilylterephthaloyl chloride, 5-trimethylsilylisophthaloyl chloride, 5-dimethylphenylsilylisophthaloyl chloride, and 5-triphenylsilylisophthaloyl chloride. The resulting amorphous polyarylates with glass transition temperatures of 163–214°C had inherent viscosities in the range of 0.41–0.95 dL/g. These polyarylates were readily soluble in common chlorinated hydrocarbons and it was possible to obtain transparent, flexible, and tough films from the polymer solutions. The prepared polyarylates showed fairly good thermal stabilities as well as tensile strengths, i.e., the tensile strengths of the cast films from chloroform solution were 6.0–6.7 kg/mm². And TGA data revealed 10% weight losses and residual weights at 800°C were 437–495°C and 27–40% under nitrogen atmosphere, respectively. © 1992 John Wiley & Sons, Inc.     

Synthesis and characterization of novel polyimides with bulky pendant groups

New dianhydrides containing t‐butyl and phenyl pendant groups have been synthesized and used as monomers, together with commercial diamines, to prepare novel polyimides. The influence of the chemical structure of the monomers on their reactivity has been studied by quantum semiempirical methods. The polyimides have been characterized by FTIR and by NMR in the case of soluble polymers. The presence of pendant groups and the method used to imidize polyimide precursors greatly affected polymer properties such as solubility, glass transition temperature, thermal stability, and mechanical properties. As a rule, the novel polyimides showed better solubility in organic solvents than the parent polyimides. Glass transition temperatures in the range 250–270°C and decomposition temperatures over 520°C were observed for the set of current polymers. Tensile strengths up to 135 MPa and mechanical moduli up to 3.0 GPa were measured on films of the current polyimides. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 805–814, 1999     

Synthesis,photoluminescence, and electrochromism of novel aromatic poly(amine‐1,3,4‐oxadiazole)s bearing anthrylamine chromophores

Two novel poly(amine‐hydrazide)s were prepared from the polycondensation reactions of the dicarboxylic acid, 9‐[N,N‐di(4‐carboxyphenyl)amino]anthracene ( 1 ), with terephthalic dihydrazide ( TPH ) and isophthalic dihydrazide ( IPH ) via the Yamazaki phosphorylation reaction, respectively. The poly(amine‐hydrazide)s were readily soluble in many common organic solvents and could be solution cast into transparent films. Differential scanning calorimetry (DSC) indicated that these hydrazide polymers had glass‐transition temperatures (T_g) in the range of 182–230 °C and could be thermally cyclodehydrated into the corresponding oxadiazole polymers in the range of 300–400 °C. The resulting poly(amine‐1,3,4‐oxadiazole)s had useful levels of thermal stability associated with high T_g (263–318 °C), 10% weight‐loss temperatures in excess of 500 °C, and char yield at 800 °C in nitrogen higher than 55%. These organo‐soluble anthrylamine‐based poly(amine‐hydrazide)s and poly (amine‐1,3,4‐oxadiazole)s exhibited maximum UV‐vis absorption at 346–349 and 379–388 nm in N‐methyl‐2‐pyrrolidone (NMP) solution, respectively. Their photoluminescence spectra in NMP solution showed maximum bands around 490–497 nm in the green region. The poly(amine‐hydrazide) I ‐ IPH showed a green photoluminescence at 490 nm with PL quantum yield of 29.9% and 17.0% in NMP solution and film state, respectively. The anthrylamine‐based poly(amine‐1,3,4‐oxadiazole)s revealed a electrochromic characteristics with changing color from the pale yellow neutral form to the red reduced form when scanning potentials negatively from 0.00 to ?2.20 V. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1584–1594, 2009     

Soluble polybenzimidazoles with intrinsic porosity: Synthesis,structure, properties and processability

We have explored two novel comonomers, namely, 4,16‐dicarboxyl[2.2]paracyclophane and 5,5′,6,6′‐tetraamino‐3,3,3′,3′‐tetramethyl‐1,1′‐spirobi[indane], for the synthesis of co‐polybenzimidazoles (co‐PBIs) with intrinsic porosity. Both these monomers possess twisted structures that can lead to “awkward” macromolecular shapes that cannot pack efficiently. The consequences of introducing these two monomers on the structure and properties of PBIs are reported. The random copolymers synthesized are amorphous and possess glass transition temperatures (T_gs) greater than 400 °C. T_g decreases with increasing comonomer content indicating an increase in fractional free volume. The copolymers have low surface area. TEM and BET measurements show evidence of mesopore formation. The copolymers show significant carbon dioxide adsorption. Single chain molecular dynamics simulation of 24‐mer repeat units shows intramolecular void spaces arising as a result of distorted polymer chain with reduced conformational mobility. These studies define a new synthetic strategy for “bottoms‐up” synthesis of PBIs with intrinsic porosity. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1046–1057     

Synthesis and characterization of highly transparent and hydrophobic fluorinated polyimides derived from perfluorodecylthio substituted diamine monomers

Two new perfluorodecylthio substituted aromatic diamines, namely 2,4‐diamino‐1‐(1H,1H,2H,2H‐perfluorodecathio)benzene (DAPFB) and 2,2'‐Bis((1H,1H,2H,2H‐perfluorodecyl)thio)[1,1'‐biphenyl]4,4'‐diamine (BPFBD) were synthesized and polycondensed with 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (6FDA) to produce two new perfluorinated polyimides (PI2 and PI4). The chemical structures of these polyimides were confirmed by Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopy and elemental analysis. Two other polyimides (PI1 and PI3) were also synthesized from 6FDA and analogous perfluorodecylthio unsubstituted diamines to investigate the incorporation effect of perfluorodecylthio group on various physical and chemical properties of the synthesized PIs. Compared with PI1 and PI3, PI2 and PI4 exhibited improved solubility, optical transparency, and hydrophobicity, lower moisture absorption, dielectric constant, and thermo‐mechanical stabilities owing to the presence of the perfluorodecylthio side group in the polymer chain. Even though thermo‐mechanical properties of PI2 and PI4 ( : 413 and 404 °C, T_g: 220 and 209 °C, tensile strength of 101 and 76 MPa, tensile modulus of 1.7 and 1.5 GPa and elongation at break of 8 and 10%, respectively) were reduced in comparison to PI1 and PI3 but still were good enough for most of the practical applications. Most importantly, the presence of the perfluorodecylthio side group in BPFBD considerably reduced the dielectric constant of PI4 to 2.71 which was quite low as aromatic polyimide. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 479–488     

Synthesis and properties of hyperbranched polybenzimidazoles via A2 + B3 approach

Hyperbranched polybenzimidazoles (HBPBIs) were successfully synthesized by condensation polymerization of 1,3,5‐benzenetricarboxylic acid (BTA) and 3,3′‐diaminobenzidine (DAB) in polyphosphoric acid (PPA) at 190 °C. Different monomer addition manners and molar ratios resulted in different polymers, that is, simultaneous addition of BTA and DAB with the molar ratio of 1:1 (manner 1) gave carboxyl‐terminated HBPBI (HBPBI‐1), whereas the addition of BTA portion‐wise to DAB solution in PPA with the molar ratio of DAB:BTA = 2:1 (manner 2) yielded amine‐terminated HBPBI (HBPBI‐2). The free carboxyl and amino groups of HBPBI‐1 and HBPBI‐2 could further react with o‐diaminobenzene and benzoic acid, respectively, to form the chemically modified polymers. Except HBPBI‐2, all the HBPBIs showed good solubility in some organic solvents (e.g., dimethyl sulfoxide and N,N‐dimethylacetamide). Thermogravimetric analysis measurement revealed that HBPBIs except HBPBI‐1 had high thermal stability (>450 °C). HBPBI membranes with good mechanical properties were obtained by crosslinking treatment of partially chemically modified HBPBIs with terephthaldehyde (TPA) during the film cast process. The HBPBI membranes had high phosphoric acid uptake and the phosphoric acid‐doped HBPBI‐6 (40% o‐diamino groups were reacted with benzoic acid) membrane showed higher tensile strength than the acid‐doped commercial PBI despite the higher doping level of the former. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1150–1158, 2007     

Synthesis and characteristics of polydepsipeptide with pendant thiol groups

To obtain water-soluble oligodepsipeptide with pendant thiol groups, the alternating co-oligomer [oligo(Glc-alt-Cys)], consisting of glycolic acid (Glc) and L -cysteine (Cys) residues as α-hydroxy acid and α-amino acid residues, respectively, was prepared by means of ring-opening homo-oligomerization of cyclo[Glc-Cys(MBzl)] and subsequent deprotection of methoxybenzyl groups. Moreover, to modify the properties of poly(lactic acid) [poly(LA)] and to introduce pendant thiol groups to poly(LA), the terpolymer of LA, Glc, and Cys {poly[LA-(Glc-Cys)]} was synthesized through ring-opening and copolymerization of L -lactide with the protected cyclodepsipeptide, cyclo[Glc-Cys(MBzl)] and subsequent deprotection of methoxybenzyl groups. By changing the mol fraction of (Glc-Cys) unit, the solubility, thermal transition, degradation behavior of the modified poly(LA), and the water contact angle of its film could be varied. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1283–1290, 1998     

Synthesis of highly sulfonated polybenzimidazoles by direct copolymerization and grafting

A series of highly sulfonated, ether‐containing polybenzimidazoles (SOPBI) with controlled sulfonation degrees were synthesized from various stoichiometric ratio mixtures of sodium 6,6'‐oxybis(3‐carboxybenzenesulfonate) (SODBA), 4,4'‐oxydibenzoic acid (ODBA), and 3,3'‐diaminobenzidine (DAB) by solution copolycondensation in poly(phosphoric acid). The resulting sulfonated polymers were further sulfonated by grafting of pendant sulfonic acid chains via a reaction of 1,3‐propane sultone with lithiated‐N of the imidazole rings in the polymer backbone, yielding materials with high, absolute IEC values (3.42–4.15 meq g^?1). Due to self‐neutralization, the solid state polymers possessed “free” acid content of 1.40 to 2.15 meq g^?1, were soluble in organic solvents yet insoluble in aqueous solution, while displaying proton conductivites (11–47 mS cm^?1) at elevated temperatures (80 °C, 95% RH). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3654–3666     

Synthesis and properties of polyimides bearing acid groups on long pendant aliphatic chains

A series of novel polyimide electrolytes having long pendant sulfo‐ or phosphoalkoxy groups were synthesized for fuel‐cell applications. Sulfodecyloxy‐, phosphodecyloxy‐, and sulfophenoxydodecyloxy‐substituted benzidine monomers were synthesized from dihydroxybenzidine. These monomers were copolymerized with naphthalene tetracarboxylic dianhydride and fluorenylidene dianiline to give the corresponding polyimides. A flexible, ductile, and self‐standing membrane was obtained via casting from the polyimide solution. Because the acid groups were on long pendant side chains and away from the main chains, the polyimide membrane showed improved oxidative and hydrolytic stability in comparison with the polyimides with sulfonic acid groups on the main chains or on the short side chains. High thermal stability (no glass‐transition temperature and a decomposition temperature > 200 °C) was also obtained. The polyimide membrane displayed high proton conductivity of 10^?1 S cm^?1 at 120 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3995–4005, 2006     

Synthesis,characterization, and electroluminescent performance of a novel copolyfluorene containing pendant crown ether groups

Copolyfluorene PFC containing pendant crown ether moieties was prepared by the palladium‐catalyzed Suzuki coupling reaction. The photo‐physical and electrochemical properties were investigated by absorption, photoluminescence (PL) spectroscopy, and cyclic voltammetry to elucidate the influence of the crown ether groups. In film state, its PL spectra (peaked at 430 and 452 nm) show noticeable red‐shift relative to 423 and 448 nm of poly(9,9‐dihexylfluorene) ( PF ). Thermal annealing leads to appearance of new emission at about 520 nm which has been attributed to formation of excimer. The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of PFC were estimated to be ?5.68 and ?2.65 eV which contributed to balanced charges injection. Double‐layer electroluminescent device using PFC as emitting layer (ITO/PEDOT:PSS/ PFC /Ca/Al) revealed maximum luminance (7910 cd/m²) and maximum luminance efficiency (2.3 cd/A) superior to those of PF device (860 cd/m², 0.29 cd/A). Moreover, inserting a PFC layer between the PF emitting layer and calcium cathode led to reduced turn‐on voltage (4.1 V), much lower than 7.1 and 6.6 V of the double‐layer PFC and PF devices, respectively, and enhanced device performance (2800 cd/m² and 0.53 cd/A). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2985–2995, 2009     

Fabrication of novel conjugated polymer nanostructure: Porphyrins and fullerenes conjugately linked to the polyacetylene backbone as pendant groups

A new series of conjugated polyacetylenes with conjugately linked fullerene and porphyrin groups as pendant units were prepared by a copolymerization reaction catalyzed by chloronorbornadiene rhodium(I)dimer‐triethylamine ([Rh(nbd)Cl]₂‐NEt₃) in anhydrous CHCl₃. These polymers were characterized with UV–vis spectroscopy, fluorescence spectroscopy, and voltammetry. Scanning electron microscopy indicated that the morphology of the copolymers consisted of uniform nanorods with a diameter of about 100 nm and a length of about 300 nm. Thin films of the copolymers produced steady and prompt photocurrent at an irradiation of 20.0 mW cm^?2 of white light, which was higher than that of a mixture of poly[5‐(4‐Ethynyl‐phenyl)‐10,15,20‐tris(4‐carbomethoxyphenyl)porphyrin zinc] and C₆₀. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2851–2861, 2005     

Synthesis and characterization of organosoluble ditrifluoromethylated aromatic polyimides

Two novel diamine monomers, 1,4‐bis (4‐aminophenoxy)‐2‐[(3′,5′‐ditrifluoromethyl)phenyl]benzene and 1,4‐bis [2′‐cyano‐3′(4″‐amino phenoxy)phenoxy]‐2‐[(3′,5′‐ditrifluoromethyl)phenyl] benzene, were synthesized from (3,5‐ditrifluoromethyl)phenylhydroquinone. A series of ditrifluoromethylated aromatic polyimides derived from the diamines were prepared through a typical two‐step polymerization method. These polyimides had a high thermal stability, and the temperatures at 10% weight loss were above 507 °C in nitrogen. Most of the polymers showed good solubility in anhydrated 1‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, chloroform, and tetrahydrofuran at room temperature. All the polymers formed transparent, strong, and flexible films with tensile strengths of 63.6–95.8 MPa, elongations at break of 5–10%, and Young's moduli of 2.38–2.96 GPa. The dielectric constants estimated from the average refractive indices are 2.69–2.89. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3018–3029, 2005     

Synthesis and characterization of aromatic polymers containing pendant silyl groups. II. Aromatic polyamides

In order to improve the solubility of aromatic polyamides without significant loss of thermal stability, synthesis of aromatic polyamides containing pendant silyl groups was carried out by direct polycondensation of silylated aromatic diacids such as 2-trimethylsilylterephthalic acid (TSTA), 2,5-bis (trimethylsilyl) terephthalic acid (BTSTA), 5-trimethylsilylisophthalic acid (TSIA), 5-dimethylphenylsilylisophthalic acid (DMSIA), and 5-triphenylsilylisophthalic acid (TPSIA) with various aromatic diamines. The resulting polyamides had inherent viscosities in the range of 0.18–1.10 dL/g and showed improved solubilities toward aprotic polar solvents such as NMP, DMF, DMSO, etc. The prepared aromatic polyamides exhibited fairly good thermal stabilities, which were almost comparable to those of corresponding nonsubstituted aromatic polyamides. That is, thermogravimetric analysis (TGA) data revealed 10% weight losses at 358–500°C and residual weights at 700°C were 46–67% under nitrogen atmosphere. © 1992 John Wiley & Sons, Inc.     

Synthesis and characterization of a new monomer with pendant hindered amine group

A new monomer, 1,2,2,6,6-pentamethyl-4-piperidinyl m-isopropenyl-α, α-dimethylbenzyl carbamate, was synthesized by direct addition of 1,2,2,6,6-pentamethyl-4-piperidinol to m-isopropenyl-α, α-dimethylbenzyl isocyanate in the presence of dibutyltin dilaurate catalyst at elevated temperatures. It was characterized by FT-IR, ¹H-NMR. MS, and elemental analysis. It is a potential hindered amine light stabilizer as it contains the 2,2,6,6-tetraalkylpiperidine moiety and its vinylic functionality makes it polymerizable.