"Designer acids": combined acid catalysis for asymmetric synthesis

Lewis and Brønsted acids can be utilized as more‐effective tools for chemical reactions by sophisticated engineering (“designer acids”). The ultimate goal of such “designer acids” is to form a combination of acids with higher reactivity, selectivity, and versatility than the individual acid catalysts. One possible way to take advantage of such abilities may be to apply a “combined acids system” to the catalyst design. The concept of combined acids, which can be classified into Brønsted acid assisted Lewis acid (BLA), Lewis acid assisted Lewis acid (LLA), Lewis acid assisted Brønsted acid (LBA), and Brønsted acid assisted Brønsted acid (BBA), can be a particularly useful tool for the design of asymmetric catalysis, because combining such acids will bring out their inherent reactivity by associative interaction, and also provide more‐organized structures that allow an effective asymmetric environment.     

Nitroxide‐mediated free‐radical copolymerization of styrene with butyl acrylate

Controlled free‐radical copolymerization of styrene (S) and butyl acrylate (BA) was achieved by using a second‐generation nitroxide, N‐tert‐butyl‐N‐[1‐diethylphosphono‐(2,2‐dimethylpropyl)] nitroxide (DEPN), and 2,2‐azobisisobutyronitrile (AIBN) at 120 °C. The time‐conversion first‐order plot was linear, and the number‐average molecular weight increased in direct proportion to the ratio of monomer conversion to the initial concentration, providing copolymers with low polydispersity. The monomer reactivity ratios obtained were r_S = 0.74 and r_BA = 0.29, respectively. To analyze the convenience of applying the Mayo–Lewis terminal model, the cumulative copolymer composition against conversion and the individual conversion of each monomer as a function of copolymerization time were studied. The theoretical values of the propagating radical concentration ratio were also examined to investigate the copolymerization rate behavior. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4168–4176, 2004     

Enantioselective Direct Mannich‐Type Reactions Catalyzed by Frustrated Lewis Acid/Brønsted Base Complexes

An enantioselective direct Mannich‐type reaction catalyzed by a sterically frustrated Lewis acid/Brønsted base complex is disclosed. Cooperative functioning of the chiral Lewis acid and achiral Brønsted base components gives rise to in situ enolate generation from monocarbonyl compounds. Subsequent reaction with hydrogen‐bond‐activated aldimines delivers β‐aminocarbonyl compounds with high enantiomeric purity.     

To Protonate or Alkylate? Stereoselective Brønsted Acid Catalysis of C?C Bond Formation Using Diazoalkanes

A new means to activate diazoalkanes has been discovered and applied broadly over the past few years. Brønsted acids, both achiral and chiral, have been used to promote the formation of carbon–carbon and carbon–heteroatom bonds with a growing number of diazoalkane derivatives. Aside from their straightforward ability to build structural and stereochemical complexity in innovative new ways, these transformations are remarkable owing to their ability to skirt competitive diazo protonation—a reaction that has long been used to prepare esters efficiently and cleanly from carboxylic acids. In cases where achiral Brønsted acids are used, high diastereoselection can be achieved. Meanwhile, chiral Brønsted acids can deliver products with both high diastereo‐ and enantioselectivity. More recently, systems have emerged that combine Brønsted acids and either Lewis acids or transition metals to promote carbon–carbon bond formation from diazoalkanes.     

Quantification of the Activation Capabilities of Lewis/Brφnsted Acid for Electrophilic Trifluoromethylthiolating Reagents

Summary of main observation and conclusion Electrophilic trifluoromethylthiolation has emerged as an important and efficient methodology for installing the SCF3 moiety onto an array of organic molecules.Due to the low reactivities of trifluoromethylthiolating reagents,these transformations often require activation through an exogenous Lewis/Br0nsted acid.We report herein the quantification of the activation capabilities of Lewis/Br0nsted acids for trifluoromethylthiolating reagents through computing the differenee in trifluoromethylthio cation donor ability(Tt+DA)between the"activated"and"unactivated"reagent.A moderate correlation is found to exist between the activation capability and Lewis acidity.     

Redox initiated cationic polymerization: Silane‐N‐aryl heteroaromatic onium salt redox couples

In this article, a new route for the synthesis of N‐aryl heteroaromatic onium salts by the direct copper catalyzed arylation of pyridine, substituted pyridines, isoquinoline, and acridine with diaryliodonium salts is described. It was demonstrated that these N‐aryl heteroaromatic onium salts undergo facile platinum or rhodium‐catalyzed reduction by silanes bearing Si? H groups. The reduction of N‐aryl heteroaromatic onium salts generates Brønsted acids. When this redox reaction was carried out in situ in the presence of an appropriate monomer, cationic polymerization was observed. Using this approach, the cationic polymerizations of epoxides, oxetanes, 1,3,5‐trioxane, styrene, and vinyl ethers were carried out. The use of optical pyrometry to monitor the redox initiated cationic polymerizations of some representative multifunctional monomers is described. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Insight into Three‐Coordinate Aluminum Species on Ethanol‐to‐Olefin Conversion over ZSM‐5 Zeolites

Commercial bioethanol can be readily converted into ethylene by a dehydration process using solid acids, such as Brønsted acidic H‐ZSM‐5 zeolites, and thus, it is an ideal candidate to replace petroleum and coal for the sustainable production of ethylene. Now, strong Lewis acidic extra‐framework three‐coordinate Al³⁺ species were introduced into H‐ZSM‐5 zeolites to improve their catalytic activity. Remarkably, Al³⁺ species working with Brønsted acid sites can accelerate ethanol dehydration at a much lower reaction temperature and shorten the unsteady‐state period within 1–2 h, compared to >9 h for those without Al³⁺ species, which can significantly enhance the ethanol dehydration efficiency and reduce the cost. The reaction mechanism, studied by solid‐state NMR, shows that strong Lewis acidic EFAl‐Al³⁺ species can collaborate with Brønsted acid sites and promote ethanol dehydration either directly or indirectly via an aromatics‐based cycle to produce ethylene.     

Brønsted acid activation strategy in transition-metal catalyzed asymmetric hydrogenation of N-unprotected imines, enamines, and N-heteroaromatic compounds

Asymmetric hydrogenation plays an important role in organic synthesis, but that of the challenging substrates such as N‐unprotected imines, enamines, and N‐heteroaromatic compounds (1H‐indoles, 1H‐pyrroles, pyridines, quinolines, and quinoxalines) has only received increased attention in the past three years. Considering the interaction modes of a Brønsted acid with a Lewis base, Brønsted acids may be used as the ideal activators of C?N bonds. This Minireview summarizes the recent advances in transition‐metal‐catalyzed, Brønsted acid activated asymmetric hydrogenation of these challenging substrates, thus offering a promising substrate activation strategy for transformations involving C?N bonds.     

Organic‐acid mediated bulk polymerization of ε‐caprolactam and its copolymerization with ε‐caprolactone

Polyamides (PA) constitute one of the most important classes of polymeric materials and have gained strong position in different areas, such as textiles, fibers, and construction materials. Whereas most PA are synthesized by step‐growth polycondensation, PA 6 is synthesized by ring opening polymerization (ROP) of ε‐caprolactam (ε‐CLa). The most popular ROP methods involve the use of alkaline metal catalyst difficult to handle at large scale. In this article, we propose the use of organic acids for the ROP of ε‐CLa in bulk at 180 °C (below the polymer's melting point). Among evaluated organic acids, sulfonic acids were found to be the most effective for the polymerization of ε‐CLa , being the Brønsted acid ionic liquid: 1‐(4‐sulfobutyl)?3‐methylimidazolium hydrogen sulfate the most suitable due to its higher thermal stability. End‐group analysis by ¹H nuclear magnetic resonance and model reactions provided mechanistic insights and suggested that the catalytic activity of sulfonic acids was a function of not only the acid strength, but of the nucleophilic character of conjugate base as well. Finally, the ability of sulfonic acid to promote the copolymerization of ε‐CLa and ε‐caprolactone is demonstrated. As a result, poly(ε‐caprolactam‐co‐ε‐caprolactone) copolymers with considerably randomness are obtained. This benign route allows the synthesis of poly(ester amide)s with different thermal and mechanical properties. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2394–2402     

A Gold‐ and Brønsted Acid Catalytic Interplay Towards the Synthesis of Highly Substituted Tetrahydrocarbazoles

The reaction of indoles and stabilized cyclopropyl alkynes under gold‐ and/or gold & Brønsted acid‐catalysis provided access to highly substituted tetrahydrocarbazoles. A mechanistic study revealed the complex mechanism underlying these processes and the opportunistic cooperation of Lewis and Brønsted acid‐catalysts towards the formation of complex molecular scaffolds.     

Brønsted Acid Mediated Novel Rearrangements of Diarylvinylidenecyclopropanes and Mechanistic Investigations Based on DFT Calculations

Diarylvinylidenecyclopropanes undergo a novel rearrangement in the presence of the Brønsted acid Tf₂NH (Tf: trifluoromethanesulfonyl) to give the corresponding naphthalene derivatives in good to high yields upon heating, whereas in the presence of the Brønsted acid toluene‐4‐sulfonic acid (p‐TSA), the corresponding triene derivatives are afforded in moderate to good yields under mild conditions. Corresponding mechanistic studies on the basis of density functional theory (DFT) with the Gaussian03 program by using the B3LYP method have revealed that the pK_a value of the Brønsted acid, as well as the entropy and solvent effects, plays a significant role in this reaction; these factors can discriminate the differences in the reactivity and regioselectivity among the Brønsted acids used in this reaction. In the presence of Lewis acid Sn(OTf)₂, a butatrienecyclopane can produce the corresponding ring‐opened products in moderate yields.     

Emulsion and controlled miniemulsion polymerization of the renewable monomer γ‐methyl‐α‐methylene‐γ‐butyrolactone

The kinetics of free‐radical emulsion polymerization of γ‐methyl‐α‐methylene‐γ‐butyrolactone (MeMBL), a renewable monomer related to methyl methacrylate, are presented in detail for the first time, and stable polymer latices are prepared. The effects of different reaction parameters on free‐radical emulsion polymerization of MeMBL are presented. Homogeneous nucleation is asserted to be the dominant path for particle formation. Miniemulsion copolymerization of MeMBL and styrene is also reported. In this case, the homogeneous nucleation process appears limited when using an oil soluble initiator. Both the RAFT miniemulsion polymerizations and RAFT bulk polymerizations are well controlled and narrow polydispersity copolymers are produced. Rate retardation is observed in the RAFT miniemulsion polymerizations compared with the free‐radical polymerization and RAFT bulk polymerizations and the possible causes of the retardation are discussed. The reactivity ratios of MeMBL and styrene in RAFT bulk copolymerization are also determined. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5929–5944, 2008     

Effect of Brønsted/Lewis Acid Ratio on Conversion of Sugars to 5‐Hydroxymethylfurfural over Mesoporous Nb and Nb‐W Oxides

A series of mesoporous Nb and Nb‐W oxides were employed as highly active solid acid catalysts for the conversion of glucose to 5‐hydroxymethylfurfural (HMF ). The results of solid state ³¹P MAS NMR spectroscopy with adsorbed trimethylphosphine as probe molecule show that the addition of W in niobium oxide increases the number of Brønsted acid sites and decreases the number of Lewis acid sites. The catalytic performance for Nb‐W oxides varied with the ratio of Brønsted to Lewis acid sites and high glucose conversion was observed over Nb₅W₅ and Nb₇W₃ oxides with high ratios of Brønsted to Lewis acid sites. All Nb‐W oxides show a relatively high selectivity of HMF , whereas no HMF forms over sulfuric acid due to its pure Brønsted acidity. The results indicate fast isomerization of glucose to fructose over Lewis acid sites followed by dehydration of fructose to HMF over Brønsted acid sites. Moreover, comparing to the reaction occurred in aqueous media, the 2‐butanol/H₂O system enhances the HMF selectivity and stabilizes the activity of the catalysts which gives the highest HMF selectivity of 52% over Nb₇W₃ oxide. The 2‐butanol/H₂O catalytic system can also be employed in conversion of sucrose, achieving HMF selectivity of 46% over Nb₅W₅ oxide.     

Redox initiated cationic polymerization: The unique behavior of alkyl glycidyl ethers

Redox systems composed of a diaryliodonium or a triarylsulfonium salt together with a silane bearing Si? H groups were used for the in situ generation of strong Brønsted acids at room temperature in the presence of alkyl glycidyl ether monomers. Secondary oxiranium intermediates are generated with lifetimes from minutes to hours at room temperature. These systems undergo rapid, exothermic cationic chain polymerization when the temperature is raised. Metastable monomer‐redox initiator systems were also observed to undergo frontal polymerizations when a localized heat source is applied to the sample. The application of these delayed cationic ring‐opening polymerization systems for the development of one‐component structural adhesives that undergo rapid thermosetting at low temperatures are discussed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and polymerization of phosphorus‐containing acrylates

Novel phosphorus‐containing acrylate monomers were synthesized by two different routes. The first involved the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with diethylphosphonoacetic acid. The monomers were bulk‐ and solution‐polymerized at 56–64 °C with 2,2′‐azobisisobutyronitrile. The ethyl ester monomer showed a high crosslinking tendency under these conditions. The selective hydrolysis of the ethyl ester phosphonic ester compound was carried out with trimethylsilyl bromide, producing a phosphonic acid monomer. In the second route, ethyl α‐hydroxymethyl acrylate and t‐butyl α‐hydroxymethyl acrylate were reacted with diethylchlorophosphate. The bulk homopolymerization and copolymerization of these monomers with methyl methacrylate and 2,2′‐azobisisobutyronitrile gave soluble polymers. The attempted hydrolysis of the monomers was unsuccessful because of the loss of the diethylphosphate group. The relative reactivities of the monomers in the photopolymerizations were also compared. The ethyl α‐hydroxymethyl acrylate/diethylphosphonic acid monomer showed higher reactivity than the other monomers, which may explain the crosslinking during the polymerization of this monomer. The reactivities of other derivatives were similar, but the rates of polymerization were slow in comparison with those of methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3221–3231, 2002     

Testing the veracity of claims of Lewis acid catalysis

Are reactions employing Lewis acids really catalysed by those Lewis acids, or by “hidden Brønsted acids”, i.e. Brønsted acids generated in situ by hydrolysis? Testing of a series of reactions using Sc(III), Fe(III), In(III) and Y(III) by addition of 2,6-di-t-butyl-4-methylpyridine reveal that all are likely to follow the latter pathway. A reaction claimed to be catalysed by CBr₄ through halogen bonding is also likely to be Brønsted acid catalysed.     

Brønsted Acid and H-Bond Activation in Boronic Acid Catalysis

Boronic acid catalysis has emerged as a mild method for promoting a wide variety of reactions. It has been proposed that the mode of catalysis involves Lewis acid or covalent activation of hydroxyl groups by boron, but limited mechanistic evidence exists. In this work, representative boronic acid catalyzed reactions of alcohols and oximes have been reinvestigated. A series of control experiments with boronic and Brønsted acids were interpreted along with correlations between their reactivity and their acidity measured by the Gutmann–Beckett method. Overall, it was concluded that the major modes of catalysis involve either dual H-bond catalysis or Brønsted acid catalysis. Strong Brønsted acids were shown to be generated in situ from covalent assembly of the boronic acids with hexafluoroisopropanol, explaining why the solvent had such a major impact on the reactivity. This new insight should guide the future development of boronic acid catalysis, where the diverse and solvent-specific nature of catalytic modes has been overlooked.     

Living cationic polymerization of amide‐functional vinyl ethers: Specific properties of SnCl4‐based initiating system

Living cationic copolymerization of amide‐functional vinyl ethers with isobutyl vinyl ether (IBVE) was achieved using SnCl₄ in the presence of ethyl acetate at 0 °C: the number–average molecular weight of the obtained polymers increased in direct proportion to the monomer conversion with relatively low polydispersity, and the amide‐functional monomer units were introduced almost quantitatively. To optimize the reaction conditions, cationic polymerization of IBVE in the presence of amide compounds, as a model reaction, was also examined using various Lewis acids in dichloromethane. The combination of SnCl₄ and ethyl acetate induced living cationic polymerization of IBVE at 0 °C when an amide compound, whose nitrogen is adjacent to a phenyl group, was used. The versatile performance of SnCl₄ especially for achieving living cationic polymerization of various polar functional monomers was demonstrated in this study as well as in our previous studies. Thus, the specific properties of the SnCl₄ initiating system are discussed by comparing with the Et_xAlCl_3?x systems from viewpoints of hard and soft acids and bases principle and computational chemistry. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6129–6141, 2008     

Impacts of Composition and Post‐Treatment on the Brønsted Acidity of Steam‐Treated Faujasite: Insights from FTIR Spectroscopy

A detailed FTIR study of the effects of steaming and acid leaching on protonated Y faujasite (FAU) and EMT zeolites is provided and the results are thoroughly analysed. In particular, emphasis is placed on the Brønsted acidic evolution and acidic strength measurements for a large series of as‐modified zeolites using CO as a sensitive probe to distinguish various protonic sites. While an increase of acidity for framework OH groups is observed during the strengthening of dealumination for both FAU and EMT series, the steaming process also generates a large variety of additional Brønsted acidic groups. Regarding acidic strength, these heterogeneous OH groups are sensitive to post‐treatments and their existence strongly depends on the initial composition of the zeolites. The presence of residual Na⁺ cations in the starting materials induces dramatic Brønsted acidic changes after steaming. As a result, steamed zeolites that initially contain traces of sodium possess unusual acidic Brønsted groups with low acidity. This result contradicts the trend generally observed with framework OH groups, for which steaming results in an increase of Brønsted acidic strength. The study reveals that the situation is indeed more complex, as some compositions and post‐treatments strongly influence the Brønsted acidity of as‐steamed zeolites both in their nature and their corresponding acidic strength. By linking these IR‐compiled features to the as‐exposed modifications, a large acidity scale better suited to characterizing catalysts having Brønsted acidity expanding from lowest to highest strength is proposed.     

Synthesis and modeling of new phosphorus‐containing acrylates

New methacrylate monomers containing phosphonic acid or both phosphonic and carboxylic acids were synthesized through the reaction of t‐butyl α‐bromomethyl acrylate with triethyl phosphite followed by the selective hydrolysis of the phosphonate or t‐butyl ester groups with trimethylsilyl bromide and trifluoroacetic acid. The copolymerization of these monomers with 2‐hydroxyethylmethacrylate was investigated with photodifferential scanning calorimetry at 40 °C with 2,2′‐dimethoxy‐2‐phenyl acetophenone as a photoinitiator. Quantum mechanical tools were also used to understand the mechanistic behavior of the polymerization reactions of these synthesized monomers. The propagation and chain‐transfer reactions were considered and rationalized. A strong effect of the monomer structure on the rate of polymerization was observed. The polymerization reactivities of the monomers increased with decreasing steric hindrance and/or increasing hydrogen‐bonding capacity because of the hydrolysis of the phosphonate and the t‐butyl ester groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2574–2583, 2005