Transition metal complexes of tetradentate and bidentate Schiff bases as catalysts for ethylene polymerization: Effect of transition metal and cocatalyst

This article compares catalytic performance of ethylene polymerization in similar polymerization conditions of transition metal complexes having two ligands [O,N] (phenoxy‐imine) and having one tetradentate ligand [O,N,N,O] (salphen or salen). It is shown that the activity of both complex types as well as the product properties depend in the same way on the type of central metal in the complex and on the cocatalyst used. Although the type of ligand has some effect on the catalyst activity, yet it does not control the properties of the obtained products. The vanadium and zirconium complexes, irrespective of the cocatalyst used, yield linear polyethylene with high molecular weight (a few hundred thousand g/mol). Similar products are formed when titanium complexes activated with MAO are employed. On the other hand, the same titanium complexes in conjunction with Et₂AlCl, yield low molecular weight polyethylene (of a few thousand) and additionally a mixture of oligomers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 565–575, 2009     

Ethylene polymerization with FI complexes having novel phenoxy‐imine ligands: Effect of metal type and complex immobilization

A series of bis(phenoxy‐imine) vanadium and zirconium complexes with different types of R³ substituents at the nitrogen atom, where R³ = phenyl, naphthyl, or anthryl, was synthesized and investigated in ethylene polymerization. Moreover, the catalytic performance was verified for three supported catalysts, which had been obtained by immobilization of bis[N‐(salicylidene)‐1‐naphthylaminato]M(IV) dichloride complexes (M = V, Zr, or Ti) on the magnesium carrier MgCl₂(THF)₂/Et₂AlCl. Catalytic performance of both supported and homogeneous catalysts was verified in conjunction with methylaluminoxane (MAO) or with alkylaluminium compounds (Et_nAlCl_3?n, n = 1–3). The activity of FI vanadium and zirconium complexes was observed to decline for the growing size of R³, whereas the average molecular weight (MW) of the polymers was growing for larger substituent. Moreover, vanadium complexes exhibited the highest activity with EtAlCl₂, whereas zirconium ones showed the best activity with MAO. All immobilized systems were most active in conjunction with MAO, and their activities were higher than those for their homogeneous counterparts, and they gave polymers with higher average MWs. That effect was in particular evident for the titanium catalyst. The vanadium complex 3 was also a good precursor for ethylene/1‐octene copolymerization; however, its immobilization reduced its potential for incorporation of a comonomer into a polyethylene chain. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Vanadium(V) complexes containing tetradentate amine trihydroxy ligands as catalysts for copolymerization of cyclic olefins

A series of vanadium(V) complexes bearing tetradentate amine trihydroxy ligands [NOOO], which differ in the steric and electronic properties, have been synthesized and characterized. Single crystal X‐ray analysis showed that these complexes are five or six coordinated around the vanadium center in the solid state. Their coordination geometries are octahedral or trigonal bipyramidal. In the presence of Et₂AlCl, these complexes have been investigated as the efficient catalysts for ethylene polymerization and ethylene/norbornene copolymerization at elevated reaction temperature and produced the polymers with unimodal molecular weight distributions (MWDs), indicating the single site behaviors of these catalysts. Both the steric hindrance and electronic effect of the groups on the tetradentate ligands directly influenced catalytic activity and the molecular weights of the resultant (co)polymers. Other reaction parameters that influenced the polymerization behavior, such as reaction temperature, ethylene pressure, and comonomer concentration, are also examined in detail. Furthermore, high catalytic activities of up to 3.30 kg polymer/mmol_V·h were also observed when these complexes were applied to catalyze the copolymerization of ethylene and 5‐norbornene‐2‐methanol, producing the high‐molecular‐weight copolymers (M_w = 157–400 kg/mol) with unimodal MWDs (M_w/M_n = 2.5–3.0) and high polar comonomer incorporations (up to 12.3 mol %). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1122–1132, 2010     

Vanadium complex with tetradentate [O,N,N,O] ligand supported on magnesium type carrier for ethylene homopolymerization and copolymerization

Immobilization of 1,2‐cyclohexylenebis(5‐chlorosalicylideneiminato)vanadium dichloride on the magnesium support obtained in the reaction of MgCl₂·3.4EtOH with Et₂AlCl gives a highly active precursor for ethylene homopolymerization and its copolymerization with 1‐octene. This catalyst exhibits the highest activity in conjunction with MAO, but it is also highly active with AlMe₃ as a cocatalyst. On the other hand, when combined with chlorinated alkylaluminum compounds, Et₂AlCl and EtAlCl₂, it gives traces of polyethylene. Moreover, its catalytic activity is strongly affected by the reaction temperature: it increased with rising polymerization temperature from 20 °C to 60 °C. The kinetic curves obtained for the supported vanadium catalyst, in contrast to its titanium analogue, are of decay type, yet the reduction in the polymerization rate is rather moderate in the early stages of polymerization, and then it is relatively very slow. The vanadium catalyst gives copolymers at a lower yield than the titanium one does, but with the significantly higher 1‐octene content. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 471–478, 2010     

Effect of an alkyl substituted in salen ligands on 1,4‐Cis selectivity and molecular weight control in the polymerization of 1,3‐butadiene with (salen)Co(II) complexes in combination with methylaluminoxane

The effect of an alkyl substituted in the aromatic ring of the salen ligand on the polymerization of butadiene (Bd) with (salen)Co(II) complexes in combination with methylaluminoxane (MAO) was investigated. The activity for the polymerization of Bd was influenced significantly by the introduction of alkyl groups at the 3,3′,5,5′‐positions in the aromatic ring of the salen ligand, and both the polymerization rate and 1,4‐cis contents increased in the following order with respect to the alkyl group: H < CH₃ < t‐C₄H₉. This is in good agreement with the bulkiness of the alkyl groups. The activity for the polymerization of the (salen)Co(II) complex possessing t‐C₄H₉ at the 3,3′‐positions was higher than that of the (salen)Co(II) bearing t‐C₄H₉ at the 5,5′‐positions. Thus, the introduction of bulky substituents at the 3,3′‐positions of the salen ligand was an important factor in achieving both high activity and high 1,4‐cis selectivity in the polymerization of Bd with (salen)Co(II) complexes in combination with MAO. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4088–4094, 2006     

Achieving branched polyethylene waxes by aryliminocycloocta[b]pyridylnickel precatalysts: Synthesis,characterization, and ethylene polymerization

Cycloocta[b ]pyridin‐10‐one was prepared to form the corresponding imino derivatives, which then reacted with (DME)NiBr₂ to form 10‐aryliminocycloocta[b ]pyridylnickel bromides ( Ni1 – Ni5 ). The new compounds were characterized by means of FT‐IR spectroscopy as well as elemental analysis and the organic ligands were also analyzed by the NMR measurements. Furthermore, the molecular structure of a representative complex Ni3 was determined by the single crystal X‐ray diffraction, indicating the distorted tetrahedral geometry around the nickel atom. Upon the activation with either methylaluminoxane (MAO) or diethylaluminium chloride (Et₂AlCl), the title nickel complexes exhibited high activity in ethylene polymerization and produced polyethylene of low molecular weight (1.43–6.78 kg mol^?1) and low dispersity (1.7–2.4), which suggests a single‐site catalytic system. More importantly, the microstructure of the resultant polyethylene (especially degree of branching) and certain physical properties, such as T _m values, can easily be modulated by selecting the proper substituents within the ligands and adjusting the polymerization conditions. This finding demonstrates that it is plausible to use a single catalyst for synthesizing different types of polyethylene on demand.10‐Aryliminocycloocta[b ]pyridylnickel bromides ( Ni1–Ni5 ), upon activation with either MAO or Et₂AlCl, exhibited high activity towards ethylene polymerization and produced polyethylenes with low molecular weight (1.43–6.78 kg mol^?1) and low dispersity (1.7–2.4). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2601–2610     

Manganese‐based transition metal complexes as new catalysts for olefin polymerizations

Three manganese complexes, Mn(acac)₃ (acac = acetylacetonate), Cp₂Mn (Cp = cyclopentadienyl), and Mn(salen)Cl [salen = 1,2‐cyclohexanediamino‐N,N′‐bis(3,5‐dit‐butyl‐salicylidene)], were used for ethylene and propylene polymerizations. These complexes, in combination with an alkylaluminum cocatalyst such as methylaluminoxane (MAO) or diethyl aluminum chloride (AlEt₂Cl), could promote ethylene polymerizations that yielded extremely high molecular weight linear polymers, but were inactive for propylene polymerizations. The counterparts supported on MgCl₂ showed activities even for propylene polymerizations and had remarkably enhanced activities for ethylene polymerizations. In the presence of an electron donor such as ethylbenzoate, the MgCl₂‐supported manganese‐based catalysts yielded a highly isotactic polypropylene with a high molecular weight. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3733–3738, 2001     

Ethylenebis(5‐chlorosalicylideneiminato)vanadium dichloride immobilized on MgCl2‐based supports as a highly effective precursor for ethylene polymerization

Ethylenebis(5‐chlorosalicylideneiminato)vanadium dichloride supported on MgCl₂(THF)₂ or on the same carrier modified by Et_nAlCl_3?n, where n = 1–3, was used in ethylene polymerization in the presence of MAO or a common alkylaluminium compounds as a cocatalyst. The support type alter vanadium loading and also change the characteristic of the catalytic active sites. Et₂AlCl is the best activator for a catalyst which has been immobilized on a nonmodified support, whereas the systems which contain a carrier which has been modified by an organoaluminium compound reveal the highest activity in conjunction with MAO. That difference, together with different temperature effects on polymerization efficiency (i.e., decrease and increase of catalytic activity for increasing temperatures, respectively) suggest the formation of different types of active sites in the catalytic systems supported on modified and nonmodified magnesium carrier. However, all supported precatalysts possess a long lifetime, still being active towards ethylene polymerization after 2 h. All the systems yield wide MWD polyethylene, while bimodal MWD is found for some part of analyzed samples. Polyethylene with bimodal particle size distribution is formed with the system which contain modified carriers at higher temperatures. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3480–3489, 2009     

Ethylene homopolymerizaton and copolymerizaton by vanadium(III) complexes containing tridentate or tetradentate iminopyrrolyl ligands

Iminopyrrolyl vanadium(III) complexes 2a–b bearing tridentate ligands [C₄H₃NCH?NC₆H₄L]VCl₂(THF) [L = 2‐P(C₆H₅)₂ ( 2a ), 2‐SMe ( 2b )] and complexes 2c–d with tetradentate ligands [(C₄H₃NCH?N)₂R]VCl(THF) [R = 1,2‐C₆H₄ ( 2c ), 1,2‐C₂H₄ ( 2d )] have been synthesized in high yields. With diethylaluminium chloride as a cocatalyst, complexes 2a–d were investigated as efficient catalysts for ethylene polymerization under various reaction conditions, and exhibited high catalytic activity and remarkable thermal stability. With these complexes, high molecular weight polymers with unimodal molecular weight distributions were obtained, indicating that the polymerization reaction took place in a single‐site nature. Ethylene/1‐hexene copolymerizations were also investigated in the presence of Et₂AlCl. Both increasing ligand denticity and introducing softer atom into the sidearm of the ligands significantly influenced catalytic activity, comonomer incorporation, and the molecular weights of the resultant polymers, suggesting that both the steric and the electronic effects of the ligands played an important role in adjusting chain propagation and transfer rate. The chain transfer mechanisms involved in the copolymerization process were investigated by carefully analyzing the microstructure of the copolymers. The signals of vinyl, disubstituted and tri‐substituted vinylene double bond end groups were detected in the copolymer obtained by 2a /Et₂AlCl system but not in those by 2b–c /Et₂AlCl systems, indicating that bulky electron‐donating group, ? P(C₆H₅)₂, may lead to those unusual transfer reactions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Novel vanadium(III) complexes with tridentate phenoxy‐phosphine [O,P(O),O] ligands: Synthesis,characterization, and catalytic behavior of ethylene polymerization and copolymerization with 10‐undecen‐1‐ol

A series of novel vanadium(III) complexes bearing tridentate phenoxy‐phosphine [O,P,O] ligands and phosphine oxide‐bridged bisphenolato [O,P?O,O] ligands, which differ in the steric and electronic properties, have been synthesized and characterized. These complexes were characterized by Fourier transform infrared spectroscopy (FTIR) and mass spectra as well as elemental analysis. Single‐crystal X‐ray diffraction revealed that complexes 3c and 4e adopt an octahedral geometry around the vanadium center. In the presence of Et₂AlCl as a cocatalyst, these complexes displayed high catalytic activities up to 22.8 kg PE/mmol_V.h.bar for ethylene polymerization, and produced high‐molecular‐weight polymers. Introducing additional oxygen atom on phosphorus atom of [O,P,O] ligands has resulted in significant changes on the aspect of steric/electronic effect, which has an impact on polymerization performance. 3c and 4c /Et₂AlCl catalytic systems were tolerant to elevated temperature (70 °C) and yielded unimodal polyethylenes, indicating the single‐site behavior of these catalysts. By pretreating with equimolar amounts of alkylaluminums, functional α‐olefin 10‐undecen‐1‐ol can be efficiently incorporated into polyethylene chains. 10‐Undecen‐1‐ol incorporation can easily reach 14.6 mol % under the mild conditions. Other reaction parameters that influenced the polymerization behavior, such as reaction temperature, Al/V (molar ratio), and comonomer concentration, are also examined in detail. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Titanium (IV) chloride complexes with salen ligands supported on magnesium carrier: Synthesis and use in ethylene polymerization

The magnesium support with the formula MgCl₂(THF)_0.32(Et₂AlCl)_0.36 was used for immobilization of salen complexes of titanium [Ti(salen)Cl₂, Ti(salen(OMe)₂)Cl₂]. The effects of the catalyst composition (i.e. type of titanium complex and type of activator), polymerization temperature, polymerization time, and the effect of comonomer (1‐octene) on the activity of the obtained supported catalysts, on the polymer characteristics (molecular weight, molecular weight distribution, melting point), and on the polymer morphology were studied. The findings were compared to those obtained for corresponding unsupported systems. Catalysts immobilization results in considerable changes in catalysts activity and in properties of resultant polymers. The studied supported catalysts are highly active in ethylene polymerization, their activity increases with increasing temperature and lasts at least 2 hours. Their copolymerizing ability towards 1‐octene is rather low. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6693–6703, 2009     

Chlorotitanium (IV) tetradentate Schiff‐base complex immobilized on inorganic supports: Support type and other factors having effect on ethylene polymerization activity

A titanium complex with [O,N,N,O]‐type tetradentate Schiff base (LTiCl₂), never used before in polymerization of olefins, was immobilized on silica‐ and magnesium‐type carriers, and it was used in ethylene polymerization. The conducted research revealed that the catalytic properties of the complex LTiCl₂ supported on those carriers were different for both the catalytic systems studied, and simultaneously they turned out different from those of the unsupported system. The supported catalysts require the use of Me₃Al, Et₃Al, or MAO as the activator to be able to offer high catalytic activities, whereas Et₂AlCl is needed for the nonsupported catalyst. This finding, together with considerable changes in polymerization yields and in properties of polymers versus composition of the catalytic system, suggest that there are different types of active sites in the studied catalysts. The catalyst anchored on the carrier produced in the reaction of MgCl₂·3.4EtOH with Et₂AlCl is definitely the most active one within the support systems tested. Its activity remarkably increases with the increasing reaction temperature. Moreover, that catalyst does not undergo deactivation over the studied period of time, irrespective of the type of the activator used and of the process temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4811–4821, 2009     

Synthesis of short straight-chain alkylamine based hyperbranched nickel complexes and their catalytic performance of ethylene oligomerization

Short straight-chain alkylamine based hyperbranched molecules and their corresponding salicylaldimine nickel complexes have been synthesized in high yield and characterized by FTIR, ¹H-NMR and mass spectrometry. The optimal reaction parameters were determined under the catalytic system of methylaluminoxane (MAO) as co-catalyst and toluene as solvent. Under these conditions, the effect of catalyst structure, solvent and co-catalyst were determined. Upon activation of MAO in toluene, ethylene oligomerization products were homogeneous distribution of butene, hexene and octene with trace higher olefin. The same catalytic system under cyclohexane and methyl cyclohexane as solvent, however, produced majority of butene. Under the activation of EtAlCl₂, Et₂AlCl and EASC as co-catalyst in toluene, ethylene oligomerization reaction was tandem with Friedel-Crafts reaction in catalytic system.     

NNNO-Heteroscorpionate nickel (II) and cobalt (II) complexes for ethylene oligomerization: the unprecedented formation of odd carbon number olefins

The unprecedented observation of odd carbon number olefins is reported during nickel- catalyzed ethylene oligomerization. Two complexes based on Co (II) and Ni (II) with novel tetradentate heteroscorpionate ligand have been synthesized and fully characterized. These complexes showed the ability to oligomerize ethylene upon activation with various organoaluminum compounds (Et₂AlCl, Et₃Al₂Cl₃, EtAlCl₂, MMAO). Ni (II) based catalytic systems were sufficiently more active (up to 1900 kg·mol (Ni)⁻¹·h⁻¹·atm⁻¹) than Co (II) analogs and have been found to be strongly dependent on the activator composition. The use of PPh₃ as an additive to catalytic systems resulted in the increase of activity up to 4,150 kg·mol (Ni)⁻¹·h⁻¹·atm⁻¹ and in the alteration of selectivity. All Ni (II) based systems activated with EtAlCl₂ produce up to 5 mol. % of odd carbon number olefins; two probable mechanisms for their formation are suggested – metathesis and β-alkyl elimination.     

Synthesis and ethylene polymerization of 8‐(fluorenylarylimino)‐5,6,7‐trihydroquinolylnickel chlorides: Tailoring polyethylenes by adjusting fluorenyl position and adduct Et2Zn

A series of 8‐(arylimino)‐5,6,7‐trihydroquinolines ligand pendant fluorenyl group at N‐aryl ring, and their nickel complexes ( Ni1 ? Ni5 ) have been prepared and characterized. Once activated with Et₂AlCl, the complexes Ni1 , Ni2 , and Ni3 bearing ligands from para‐fluorenylaniline produced unimodal polyethylenes; on the contrary complexes Ni4 and Ni5 gave bimodal polyethylenes due to steric influence of ligands from ortho‐fluorenyl anilines. With a increment of Et₂Zn/ Ni4 ratio from 0 to 400, the distinct bimodel polyethylenes were obtained with molecular weights shifted from 14.3 to 57.6 kg·mol^?1; apart shiftment to higher molecular weights, the portion of low molecular weight decreased along with higher portion of high molecular weight. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1910–1919     

Half‐titanocene complexes bearing dianionic 6‐benzimidazolylpyridyl‐2‐carboximidate ligands: Synthesis,characterization, and their ethylene polymerization

6‐Benzimidazolylpyridyl‐2‐carboximidic half‐titanocene complexes, Cp′TiLCl (Cp′ = C₅H₅, MeC₅H₄, C₅Me₅, L = 6‐benzimidazolylpyridine‐2‐carboxylimidic, C1–C13 ), were synthesized and characterized along with single‐crystal X‐ray diffraction. The half‐titanocene chlorides containing substituted cyclopentadienyl groups, especially pentamethylcyclopentadienyl groups were more stable, while those without substituents on the cyclopentadienyl groups were easily transformed into their dimeric oxo‐bridged complexes, (CpTiL)₂O ( C14 and C15 ). In the presence of excessive amounts of methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), all half‐titanocene complexes showed high catalytic activities for ethylene polymerization. The substituents on the Cp groups affected the catalytic behaviors of the complexes significantly, with less substituents favoring increased activities and higher molecular weights of the resultant polyethylenes. Effects of reaction conditions on catalytic behaviors were systematically investigated with catalytic systems of mononuclear C1 and dimeric C14 . With C1 /MAO, large MAO amount significantly increases the catalytic activity, while the temperature only has a slight effect on the productivity. In the case of C14 /MAO catalytic system, temperature above 60 °C and Al/Ti value higher than 5000 were necessary to observe good catalytic activities. In both systems, higher reaction temperature and low cocatalyst amount gave the polyethylenes with higher molecular weights. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3396–3410, 2008     

Olefin polymerization and copolymerization by complexes bearing [ONNO]‐Type salan ligands: Effect of ligand structure and metal type (titanium,zirconium, and vanadium)

A series of novel titanium(IV) complexes bearing tetradentate [ONNO] salan type ligands: [Ti{2,2′‐(OC₆H₃‐5‐t‐Bu)₂‐NHRNH}Cl₂] (Lig¹TiCl₂: R = C₂H₄; Lig²TiCl₂: R = C₄H₈; Lig³TiCl₂: R = C₆H₁₂) and [Ti{2,2′‐(OC₆H₂‐3,5‐di‐t‐Bu)₂‐NHC₆H₁₂NH}Cl₂] (Lig⁴TiCl₂) were synthesized and used in the (co)polymerization of olefins. Vanadium and zirconium complexes: [ M{2,2′‐(OC₆H₃‐3,5‐di‐t‐Bu)₂‐NHC₆H₁₂NH}Cl₂] (Lig⁴VCl₂: M = V; Lig⁴ZrCl₂: M = Zr) were also synthesized for comparative investigations. All the complexes turned out active in 1‐octene polymerization after activation by MAO and/or Al(i‐Bu)₃/[Ph₃C][B(C₆F₅)₄]. The catalytic performance of titanium complexes was strictly dependent on their structures and it improves for the increasing length of the aliphatic linkage between nitrogen atoms (Lig¹TiCl₂ << Lig²TiCl₂ < Lig³TiCl₂) and declines after adding additional tert‐Bu group on the aromatic rings (Lig³TiCl₂ < Lig⁴TiCl₂). The activity of all titanium complexes in ethylene polymerization was moderate and the properties of polyethylene was dependent on the ligand structure, cocatalyst type, and reaction conditions. The Et₂AlCl‐activated complexes gave polymers with lover molecular weights and bimodal distribution, whereas ultra‐high molecular weight PE (up to 3588 kg mol^?1) and narrow MWD was formed for MAO as a cocatalyst. Vanadium complex yielded PE with the highest productivity (1925.3 kg mol_v^?1), with high molecular weight (1986 kg mol^?1) and with very narrow molecular weight distribution (1.5). Copolymerization tests showed that titanium complexes yielded ethylene/1‐octene copolymers, whereas vanadium catalysts produced product mixtures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2111–2123     

Synthesis of ultra‐high‐molecular‐weight ethylene‐propylene copolymer via quasi‐living copolymerization with N‐heterocyclic carbene ligated vanadium complexes

The quasi‐living copolymerization of ethylene with propylene was achieved by using N‐heterocyclic carbene (NHC) ligated vanadium complex ( V3 , VOCl₃[1,3‐(2,6‐ⁱPr₂C₆H₃)₂(NCH?)₂C:]) due to the stabilization of active center by the introduction of bulky and electron rich NHC ligand with bulky isopropyl substituents at the ortho positions of the phenyl rings. The weight‐average molecular weight (M_w) of the resulting copolymer increases linearly with its weight in 20 min. The ultra‐high‐molecular‐weight (UHMW) ethylene‐propylene copolymer (M_w = 1612 kg mol^?1) can be synthesized with V3 /Et₃Al₂Cl₃ catalytic system. The novel complex V4′ (VCl₃[1,3‐(2,4,6‐Me₃C₆H₂)₂(NCH?)₂C:]·2THF) was constructed by the introduction of two coordinated tetrahydrofuran molecules and decrease in steric hindrance at the ortho positions of phenyl rings. The UHMW ethylene‐propylene copolymer (M_w = 1167 kg mol^?1) can also be synthesized by using V4′ /Et₃Al₂Cl₃ catalytic system. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 553–561     

Copolymerization of carbon dioxide and cyclohexene oxide catalyzed by chromium complexes bearing semirigid [ONSO]‐type ligands

Chromium complexes supported by tetradentate dianionic imine‐thioether‐bridged bis(phenol) ligands were prepared and employed in the synthesis of poly(cyclohexene carbonate) via the copolymerization of CO₂ and cyclohexene oxide. The catalytic activity, product selectivity, and kinetic behaviors of these [ONSO]Cr^III complexes have been systematically investigated. Results indicate the presence of electron‐withdrawing substituents on the ligands to enhance catalytic activity and polymer selectivity. A turnover frequency of 100 h^?1 is observed at a temperature of 110 °C, producing polycarbonate with >60% selectivity. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1938–1944     

Highly active ethylene polymerization and copolymerization with norbornene using bis(imino‐indolide) titanium dichloride–MAO system

A catalytic system of new titanium complexes with methylaluminoxane (MAO) was found to effectively polymerize ethylene for high molecular weight polyethylene as well as highly active copolymerization of ethylene and norbornene. The bis (imino‐indolide)titanium dichlorides (L₂TiCl₂, 1 – 5 ), were prepared by the reaction of N‐((3‐chloro‐1H‐indol‐2‐yl)methylene)benzenamines with TiCl₄, and characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy. The solid‐state structures of 1 and 4 were determined by X‐ray diffraction analysis to reveal the six‐coordinated distorted octahedral geometry around the titanium atom with a pair of chlorides and ligands in cis‐forms. Upon activation by MAO, the complexes showed high activity for homopolymerization of ethylene and copolymerization of ethylene and norbornene. A positive “comonomer effect” was observed for copolymerization of ethylene and norbornene. Both experimental observations and paired interaction orbital (PIO) calculations indicated that the titanium complexes with electron‐withdrawing groups in ligands performed higher catalytic activities than those possessing electron‐donating groups. Relying on different complexes and reaction conditions, the resultant polyethylenes had the molecular weights M_w in the range of 200–2800 kg/mol. The influences on both catalytic activity and polyethylene molecular weights have been carefully checked with the nature of complexes and reaction conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3415–3430, 2007