New selenium‐based iniferter agent for living free radical polymerization of styrene under UV irradiation

P,P‐Diphenyl phosphinodiselenoic acid benzyl ester was synthesized and used as a mediator for the polymerization of styrene under UV–vis irradiation. Moderately controlled evidence was found: linear polymerization kinetics, linear evolution of molecular weight with monomer conversion, and relatively narrow molecular weight distribution (1.5–2.0). The structure of the obtained polymers was characterized using NMR and oxidative eliminaton. Based on polymerization results, an iniferter mechanism was proposed for the current polymerization system. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polymerization of vinyl monomers using a novel trifunctional iniferter

A novel trifunctional iniferter with photoinduced and thermal chemical dissociation functional groups in one molecule, diethyl 2,3‐dicyano‐2,3‐di(p‐N,N‐diethyldithiocarbamylmethyl)phenylsuccinate (DDDCS), was successfully synthesized. The bulk polymerizations of styrene and methyl methacrylate initiated by DDDCS under UV‐light irradiation and heating, respectively, were studied. The polymerizations proceeded via a living polymerization process in both cases; that is, the conversion and molecular weight of the resulting polymer increased linearly with increased reaction time. The resulting polymers, containing α‐ and ω‐N,N‐diethyldithiocarbamyl end groups, served as macroiniferters for further block copolymerization. Electron paramagnetic resonance studies showed that DDDCS initiated as a photoiniferter under UV‐light irradiation by reversible C S‐bond dissociation and as a thermal iniferter under heating by reversible hexasubstituted C C‐bond dissociation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2115–2120, 2000     

Synthesis of a novel methacrylic monomer iniferter and its application in surface photografting on crosslinked polymer substrates

(Methacryloyl ethylenedioxycarbonyl) benzyl N,N‐diethyldithiocarbamate (HEMA‐E‐In) was synthesized and used as a monomer iniferter to develop a novel, photopatternable grafting technology. This molecule functions as both a methacrylic monomer and a photoiniferter (photoinitiator–transfer agent–terminator). The structure of HEMA‐E‐In was characterized by ¹H NMR, Fourier transform infrared, and ultraviolet–visible spectroscopies. In the presence of the monomer iniferter, methyl methacrylate was polymerized by exposure to 365‐nm ultraviolet radiation, confirming the initiation capability of HEMA‐E‐In. After the copolymerization of HEMA‐E‐In into a methacrylate‐based polymer, attenuated total reflectance Fourier transform infrared spectra revealed that the photoiniferter functionality was present at the surface of this polymeric substrate. Photografting of poly(ethylene glycol) monomethacrylate monomer from the surface caused a significant change in the hydrophobicity of the surface as demonstrated by contact angle measurements. The novel monomer photoiniferter HEMA‐E‐In initiates the polymerization of bulk monomer and provides a reactive functionality that facilitates further initiation and polymer modification by the polymerization of different monomers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1885–1891, 2002     

Single‐electron transfer‐living radical copolymerization of butyl methacrylate and divinylbenzene for preparation of oil‐absorbing gel

Crosslinking copolymerization of butyl methacrylate with a small amount of divinylbenzene (DVB) was carried out using single‐electron transfer‐living radical polymerization initiated with carbon tetrachloride (CCl₄) and catalyzed by Cu(0)/N‐ligand in N,N‐dimethylformamide to produce a highly oil‐absorbing gel. The polymerization, gelation process, and oil‐absorbing properties were studied in detail. Analysis of monomer conversion with reaction time showed that the polymerization followed first‐order kinetics for both linear and crosslinking polymerization before gelation. Higher levels of DVB led to earlier gelation and the influence of N‐ligand on gelation was also significant. Under optimal conditions, oil absorption of the prepared gel to chloroform could reach 42.1 g·g^?1. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3233–3239     

High solids TEMPO‐mediated radical semibatch emulsion polymerization of styrene

A bicomponent initiation system consisting of 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO) and the water soluble initiator potassium persulfate (KPS) was used to develop a robust and versatile semibatch emulsion polymerization process to obtain polystyrene (PS) latexes with solids contents of 5–40 wt %. A window of operating conditions was found that yielded high conversion (>95%) stable latexes and well controlled polymers, overcoming limitations found in previous attempts at developing similar processes using TEMPO. The critical parameters studied were surfactant concentration, monomer concentration in the nucleation step and the monomer feed rate in the semibatch step. Methyl acrylate (MA) was used in the nucleation step to improve the nitroxide efficiency (N_Eff). Latexes having molecular weight distribution (MWD) with dispersity (?) lower than 1.5, average particle size (D_p) from ≈32 to ≈500 nm, nitroxide efficiencies N_Eff up to ≈1.0 and monomer conversions >90% were obtained in less than 12 h with solids contents up to 40 wt %. These results constitute a significant advance over prior efforts in TEMPO‐mediated polymerization in aqueous dispersions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 49–62     

Controlled radical polymerization of 2‐hydroxyethyl methacrylate initiated by photofunctional 2‐(N,N‐diethyldithiocarbamyl)isobutyric acid

We demonstrated that density functional theory calculations provide a reliable and quantitative prediction of the trends in C? S bond dissociation energies using several model compounds as photoinitiator. On the basis of this information, we designed a possible photofunctional initiator for the polymerization of hydrophilic vinyl monomers. Photopolymerization of 2‐hydroxyethyl methacrylate (HEMA) hydrophilic monomer was carried out in ethanol initiated by 2‐(N,N‐diethyldithiocarbamyl)isobutyric acid (DTCA) under UV irradiation. We performed the first‐order time‐conversion plots in this polymerization system, and the straight line in the semilogarithmic coordinates indicated first order in monomer. The molecular weight of the poly(2‐hydroxyethyl methacrylate) (PHEMA) increased with increasing conversion. The molecular weight distribution (M_w/M_n) of the PHEMA was about 1.5. Methyl methacrylate (MMA) could also be polymerized in a living fashion with such a PHEMA precursor as a macroinitiator because PHEMA exhibited a dithiocarbamate (DC) group at its terminal end. This system could be applied to the architecture of amphiphilic block copolymers. It was concluded that these polymerization systems proceeded with controlled radical mechanism. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 76–82, 2004     

Evolution of iron catalysts for effective living radical polymerization: P–N chelate ligand for enhancement of catalytic performances

Iron catalysts were evolved for more active transition metal‐catalyzed living radical polymerization through design of the ligands. In situ introduction of P–N chelate‐ligands, consisting of hetero‐coordinating atoms [phosphine (P) and nitrogene (N)], onto FeBr₂ effectively catalyzed living radical polymerization of methyl methacrylate (MMA) in conjunction with a bromide initiator, where the monomer‐conversion reached over 90% without dropping the rates and the molecular weights of obtained PMMAs were well controlled. The benign effects of the “hetero‐chelation” were demonstrated by comparative experiments with homo‐chelate ligands (P–P, N–N), model compounds of the composed coordination site, and the combinations. We successfully achieved an isolation of iron complex with a P–N ligand [FeBr₂(DMDPE); DMDPE: (R)‐N,N‐dimethyl‐1‐(2‐(diphenylphosphino)phenyl)‐ethanamine], which was superior to the conventional catalyst [FeBr₂(Pn‐Bu)₂] with respect to controllability and activity, especially at the latter stage. The catalyst was almost quantitatively removed by water washing after polymerization. It was also effective for living polymerization of styrene. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6819–6827, 2008     

N‐Bromosuccinimide as a thermal iniferter for radical polymerization

N‐Bromosuccinimide (NBS) was used as a thermal iniferter for the initiation of the bulk polymerizations of methyl methacrylate, methyl acrylate, and styrene. The polymerizations showed the characteristics of a living polymerization: both the yields and the molecular weights of the resultant polymers increased linearly as the reaction time increased. The molecular weight distributions of the polymers were 1.42–1.95 under the studied conditions. The resultant polymers could be used as macroiniferters to reinitiate the polymerization of the second monomer. The copolymers poly(methyl methacrylate)‐b‐polystyrene and polystyrene‐b‐poly(methyl methacrylate) were obtained and characterized. End‐group analysis of the resultant poly(methyl methacrylate), poly(methyl acrylate), and polystyrene confirmed that NBS behaved as a thermal iniferter. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2567–2573, 2005     

Synthesis of nanocylinders consisting of graft block copolymers by the photo‐induced ATRP technique

Photoinduced atom transfer radical polymerizations (ATRP) of t‐butyl methacrylate (BMA) were carried out, initiated by model initiator benzyl N,N‐diethyldithiocarbamate (BDC) in the presence of CuCl/bipyridine (bpy) under UV irradiation. We performed the first‐order time‐conversion plots in this polymerization system, and the straight line in the semilogarithmic coordinates indicated a first‐order in the monomer. The molecular weight of poly(t‐butyl methacrylate) (PBMA) increased in direct proportion to monomer conversion. The molecular weight distribution (M_w/M_n) of PBMA was about 1.3. The initiator efficiency, f, was close to 1.0, which indicated that no side reactions occurred. A copper complex, CuCl/bpy, reversibly activated the dormant polymer chains via a N,N‐diethyldithiocarbamate (DC) transfer reaction such as Cu(DC)Cl/bpy, and it was dynamic equilibrium that was responsible for the controlled behavior of the polymerization of BMA. On the basis of this information, we established a preparation method of nanocylinders consisting of graft block copolymers by grafting from photoinduced ATRP of multifunctional polystyrene having DC pendant groups with vinyl monomers [first monomer, BMA; second monomer, styrene or methyl methcrylate (MMA)]. We have carried out the characterization of such nanocylinders in detail. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 63–70, 2005     

Photoinitiated dispersion polymerization of methyl methacrylate: A quick approach to prepare polymer microspheres with narrow size distribution

Photoinitiated dispersion polymerization of methyl methacrylate was carried out in a mixture of ethanol and water as dispersion medium in the presence of poly(N‐vinylpyrrolidone) (PVP) as the steric stabilizer and Darocur 1173 as photoinitiator. 93.7% of conversion was achieved within 30 min of UV irradiation at room temperature, and microspheres with 0.94 μm number–average diameter and 1.04 polydispersity index (PDI) were obtained. X‐ray photoelectron spectroscope (XPS) analysis revealed that only parts of surface of the microspheres were covered by PVP. The particle size decreased from 2.34 to 0.98 μm as the concentration of PVP stabilizer increased from 2 to 15%. Extra stabilizer (higher than 15%) has no effect on the particle size and distribution. Increasing medium polarity or decreasing monomer and photoinitiator concentration resulted in a decrease in the particle size. Solvency of reaction medium toward stabilizer, which affects the adsorption of stabilizer on the particle surface, was shown to be crucial for controlling particle size and uniformity because of the high reaction rate in photoinitiated dispersion polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1329–1338, 2008     

Synthesis of carbazole‐based light‐emitting polymers incorporating 2,5‐bis(phenylethenyl)‐4‐decyloxyanisole as collateral fluorophore

The Suzuki coupling polymerization between bis(carbazole) monomer ( CzDB ) and 9,9‐dihexylfluorene‐2,7‐diboronic acid was carried out to obtain PFCz‐PEDA0 having the number‐averaged molecular weight of 7000. The absorption and emission maximum wavelengths were observed at 344 and 408 nm, respectively. The quantum yield (QY) was relatively low (0.12) because of the photo‐induced electron transfer. Subsequently, CzPEDA ‐bearing 2,5‐bis(phenylethenyl)‐4‐decyloxyanisole (PEDA) segment sandwiched with 3‐bromocarbazole units was copolymerized to give PFCz‐PEDAn (n = 05, 10, 20, 35, and 50). The content of PEDA segment in polymer could be controlled by the monomer feed ratio. In CHCl₃ solution, the absorbance at around 400 nm became larger with one isosbestic point at 370 nm, and the emission peak at 448 nm became prominent with increasing the PEDA content. The QY of polymer was increased as the PEDA content, which was a consequence of the fluorescence resonance energy transfer from carbazole‐containing chromophore (energy donor) to PEDA fluorophore (energy acceptor). In spin‐coated film, the maximum QY was obtained in PFCz‐PEDA05 having the most appropriate molar balance of energy donor and acceptor units. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8141–8148, 2008     

Samarium powder as catalyst for SET‐LRP of acrylonitrile in 1,1,1,3,3,3‐hexafluoro‐2‐propanol for control of molecular weight and tacticity

Samarium powder was applied as a catalyst for single electron transfer‐living radical polymerization (SET‐LRP) of acrylonitrile (AN) in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) with 2‐bromopropionitrile as initiator and N,N,N′,N′‐tetramethylethylenediamine as ligand. First‐order kinetics of polymerization with respect to the monomer concentration, linear increase of the molecular weight with monomer conversion, and the highly syndiotactic polyacrylonitrile (PAN) obtained indicate that the SET‐LRP of AN could simultaneously control molecular weight and tacticity of PAN. An increase in syndiotacticity of PAN obtained in HFIP was observed compared with that obtained by SET‐LRP in N,‐N‐dimethylformamide (DMF). The syndiotacticity markedly increased with the HFIP volume. The syndiotacticity of PAN prepared by SET‐LRP of AN using Sm powder as catalyst in DMF was higher than that prepared with Cu powder as catalyst. The increase in syndiotacticity of PAN with Sm content was more pronounced than the increase in its isotacticity. The block copolymer PAN‐b‐polymethyl methacrylate (52,310 molecular weight and 1.34 polydispersity) was successfully prepared. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Kinetics of self‐condensing vinyl hyperbranched polymerization in three‐dimensional space

Self‐condensing vinyl hyperbranched polymerization (SCVP) with A‐B* type monomer is simulated applying Monte Carlo method using 3d bond fluctuation lattice model in three‐dimensional space. The kinetics of SCVP with zero active energy of reaction is studied in detail. It is found that the maximal number–average and weight–average polymerization degrees and the maximal molecular weight distribution, at varying the initial monomer concentration and double bond conversion, are about 52, 190, and 3.93, respectively, which are much lower than theoretical values. The maximal average fraction of branching points is about 0.27, obtained at full conversion at the initial monomer concentration of 0.75. The simulation demonstrated the importance of steric effects and intramolecular cyclization in self‐condensing vinyl hyperbranched polymerization. The results are also compared with experiments qualitatively and a good agreement is achieved. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4486–4494, 2008     

Efficient synthesis of monodisperse,highly crosslinked,and “living” functional polymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization

The facile and efficient one‐pot synthesis of monodisperse, highly crosslinked, and “living” functional copolymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization (ILRPP) is described for the first time. The simple introduction of iniferter‐induced “living” radical polymerization (ILRP) mechanism into precipitation polymerization system, together with the use of ethanol solvent, allows the direct generation of such uniform functional copolymer microspheres. The polymerization parameters (including monomer loading, iniferter concentration, molar ratio of crosslinker to monovinyl comonomer, and polymerization time and scale) showed much influence on the morphologies of the resulting copolymer microspheres, thus permitting the convenient tailoring of the particle sizes by easily tuning the reaction conditions. In particular, monodisperse poly(4‐vinylpyridine‐co‐ethylene glycol dimethacrylate) microspheres were prepared by the ambient temperature ILRPP even at a high monomer loading of 18 vol %. The general applicability of the ambient temperature ILRPP was confirmed by the preparation of uniform copolymer microspheres with incorporated glycidyl methacrylate. Moreover, the “livingness” of the resulting polymer microspheres was verified by their direct grafting of hydrophilic polymer brushes via surface‐initiated ILRP. Furthermore, a “grafting from” particle growth mechanism was proposed for ILRPP, which is considerably different from the “grafting to” particle growth mechanism in the traditional precipitation polymerization. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Single electron transfer‐living radical polymerization of methyl methacrylate in fluoroalcohol: Dual control over molecular weight and tacticity

The Cu(0)‐mediated single electron transfer‐living radical polymerization (SET‐LRP) of methyl methacrylate (MMA) using ethyl 2‐bromoisobutyrate (EBiB) as an initiator with Cu(0)/N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine as a catalyst system in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was studied. The polymerization showed some living features: the measured number‐average molecular weight (M_n,GPC) increased with monomer conversion and produced polymers with relatively low polydispersities. The increase of HFIP concentration improved the controllability over the polymerization with increased initiation efficiency and lowered polydispersity values. ¹H NMR, MALDI‐TOF‐MS spectra, and chain extension reaction confirmed that the resultant polymer was end‐capped by EBiB species, and the polymer can be reactivated for chain extension. In contrast, in the cases of dimethyl sulfoxide or N,N‐dimethylformamide as reaction solvent, the polymerizations were uncontrolled. The different effects of the solvents on the polymerization indicated that the mechanism of SET‐LRP differed from that of atom transfer radical polymerization. Moreover, HFIP also facilitated the polymerization with control over stereoregularity of the polymers. Higher concentration of HFIP and lower reaction temperature produced higher syndiotactic ratio. The syndiotactic ratio can be reached to about 0.77 at 1/1.5 (v/v) of MMA/HFIP at ?18 °C. In conclusion, using HFIP as SET‐LRP solvent, the dual control over the molecular weight and tacticity of PMMA was realized. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6316–6327, 2009     

Tetraalkylammonium salt as photoinitiator of vinyl polymerization in organic and aqueous media: A mechanistic and laser flash photolysis study

N‐Dimethyl‐N‐[2‐(N,N‐dimethylamino)ethyl]‐N‐(1‐methylnaphthyl)ammonium tetrafluoroborate ( I ) was synthesized with the aim of obtaining a versatile photoinitiator for vinyl polymerization in organic solvents and water. Salt I was able to trigger the polymerization of acrylamide, 2‐hydroxyethylmethacrylate and styrene even at very low concentrations of the salt (～1.0 × 10^?5 M). Using laser flash photolysis and fluorescence techniques and analyzing the photoproduct distribution, we were able to postulate a mechanism for the photodecomposition of the salt. With irradiation, I undergoes an intramolecular electron‐transfer reaction to form a radical ion pair (RIP). The RIP intermediate decomposes into free radicals. The RIP and the free radicals are active species for initiating the polymerization. Depending on the concentration of the vinyl monomers studied, the initiation mechanism of the polymerization reaction changes. At large monomer concentrations, the RIP state is postulated to trigger the reaction by generating the anion radical of the olefin substrate. At a low monomer concentration, the free radicals produced by the decomposition of I are believed to start the chain reaction. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 901–913, 2002; DOI 10.1002/pola.10166     

Visible‐light induced RAFT polymerization of styrenic monomers with aromatic aldehydes as organophotoredox catalysts

A photoinduced electron transfer‐reversible addition‐fragmentation chain transfer (PET‐RAFT) polymerization of p‐methylstyrene (p‐MS) and styrene (St) with 2‐(dodecylthiocarbonothioylthio)‐2‐methylpropionic acid as the chain transfer agent (CTA) and aromatic aldehydes, including 4‐cyanobenzaldehyde (PC1), 2,4‐dimethoxy benzaldehyde, and 4‐methoxy benzaldehyde, as organic photocatalysts has been demonstrated via irradiation with 23 W compact fluorescent lamps. The kinetics of the polymerizations shows first order with respect to monomer conversions. Linear evolution of the M_n of the produced polymers with the monomer conversion is observed. Meanwhile, the as‐prepared polymers are of relatively narrow polydispersity (PDI = M_w/M_n). For instance, the polymerization of p‐MS shows living polymerization features using PC1 within a range of solvents. Especially, the M_n of PpMS increased from about 2100 to 12,700 g/mol with the monomer conversion from 8% to 52% in tetrahydrofuran. The controlled polymerization of St is also observed under optimal reaction conditions. However, the M_n discrepancy between the experimental readings and theoretical calculations is greater at the monomer conversions greater than 40% and the PDI increased gradually over the monomer conversion. This is probably because that CTA is strongly sensitive to the light irradiation with wave range around its characteristic absorption wavelength, leading to significant decomposition of CTA moieties during the RAFT polymerization. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2072–2079     

Nonaqueous dispersion polymerization of styrene in methanol with the ionomer block copolymer poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)]‐b‐polyisobutene as a stabilizer

The nonaqueous dispersion polymerization of styrene in methanol with poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)]‐b‐polyisobutene as a stabilizer was investigated. There was no observable inducing period or autoacceleration in the polymerization process. The conversion increased almost linearly with the polymerization time as high as 80%. The average sizes of the obtained polystyrene particles increased, and the size distributions of the polystyrene particles tended to become narrower, with increasing conversion. The mechanism of the dispersion polymerization in the presence of polyisobutene‐b‐poly[(4‐methylstyrene)‐co‐(4‐vinyltriethylbenzyl ammonium bromide)] was nucleation/growth. When the stabilizer/monomer ratio (w/w) was greater than 2.0%, the polystyrene dispersion was stable, and there was no observable polymer particle coagulation taking place during the whole polymerization process. The average diameter of the polymer particles can be mediated through changes in the polymerization conversion, monomer, and stabilizer. Nearly monodispersed polystyrene particles with average diameters of approximately 0.45–2.21 μm were obtained under optimal conditions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2678–2685, 2004     

Monodisperse polystyrene microspheres prepared by dispersion polymerization with microwave irradiation

Monodisperse polystyrene microspheres with diameters of 200–500 nm were prepared by dispersion polymerization with microwave irradiation with poly(N‐vinylpyrrolidone) as a steric stabilizer and 2,2′‐azobisisobutyronitrile as a radical initiator in an ethanol/water medium. The morphology, size, and size distribution of the polystyrene microspheres were characterized with transmission electron microscopy and photon correlation spectroscopy, and the formed films of the polystyrene dispersions were characterized with atomic force microscopy. The effects of the monomer concentration, stabilizer concentration, and initiator concentration on the size and size distribution of the polystyrene microspheres were investigated. The polystyrene microspheres prepared by dispersion polymerization with microwave irradiation were smaller, more uniform, and steadier than those obtained with conventional heating. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2368‐2376, 2005     

Unusually highly efficient,singlet state,visible light photoinitiators based on styrylbenzimidazolium phenyltributylborate photoredox pairs for vinyl monomers free radical polymerization

In this article, hemicyanine dye–borate complexes, for example, 1,3‐dimethyl‐2‐[4‐(N,N‐dialkylamino)styryl]benzimidazolium phenyl‐tri‐n‐butylborates, were employed as the novel, very effective photoinitiators operating in the visible light region. The influence of the sensitizers and electron donor structure on the photopolymerization kinetics of multiacrylate monomer was investigated by photo‐DSC. The maximum photopolymerization quantum yield measured for 2‐ethyl‐2‐(hydroxymethyl)‐1,3‐propanediol triacrylate (TMPTA) was about 67 for sample of thickness of about 1 mm under 100 mW/cm² laser irradiation. It was found that the polymerization rate and the final conversion degree were depended on the dye structure. Moreover, the photoinitiating systems described gave a double bond conversion higher than the photoinitiator possessing as chromophore RBAX (Rose Bengal derivative), the common triplet state initiator. Additionally, the rate of photopolymerization depends on ΔG_el of electron transfer between borate anion and styrylbenzimidazolium cation. This latter value was estimated for a series of styrylbenzimidazolium borate salts. The relationship between the rate of polymerization and the free energy of activation for electron transfer reaction gives the dependence predicted by the classical theory of electron transfer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4119–4129, 2009