Mechanical property and corrosion resistance of zirconia/polydopamine nanocomposite multilayer films fabricated via a novel non‐electrostatic layer‐by‐layer assembly technique

Zirconia/polydopamine (ZrO₂/PDA) nanocomposite multilayer films were constructed on Si substrate via a novel nonelectrostatic layer‐by‐layer (NELBL) assembly technique. The building block of this technique is the newly reported dopamine molecule, which can be attached to almost all material surfaces and undergo oxidation‐polymerization to form PDA layers; more importantly, the outer hydroxyl groups of the PDA layer can chelated with certain inorganic oxide nanoparticles to generate oxide films. Thus, ZrO₂/PDA nanocomposite multilayer films were fabricated by sequential NELBL deposition of PDA and ZrO₂ nanoparticles. The formation of the ZrO₂/PDA nanocomposite multilayer films was monitored by the water contact angle (WCA) and ellipsometric thickness measurements, while the microstructure of the fabricated films was analyzed by means of atomic force microscope (AFM), field emission scanning electron microscope (FESEM), X‐ray photoelectron spectrum (XPS), and X‐ray diffraction (XRD) analysis. The mechanical and anticorrosion behaviors of the annealed ZrO₂/PDA nanocomposite multilayers were found to be greatly enhanced as compared with that of the annealed homogeneous ZrO₂ film. The better mechanical and anticorrosion behaviors of the annealed ZrO₂/PDA nanocomposite multilayers than the annealed homogeneous ZrO₂ film may be closely related to their special microstructure. Namely, the organic–inorganic hybrid microstructure of the annealed ZrO₂/PDA nanocomposite multilayers may largely account for the increased nanohardness and corrosion resistance. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation and characterization of covalently bonded PVA/Laponite/HAPI nanocomposite multilayer freestanding films by layer‐by‐layer assembly

The layer‐by‐layer (LBL) assembly technique is an attractive method to make functional multilayer thin films and has been applied to fabricate a wide range of materials. LBL materials could improve optical transmittance and mechanical properties if the film components were covalently bonded. Covalently bonded nanocomposite multilayer films were prepared by employing hydrophilic aliphatic polyisocyanate (HAPI) as the reactive component, to react with Laponite and polyvinyl alcohol (PVA). FT‐IR spectra suggested that HAPI reacted with Laponite and PVA at ambient temperature rapidly. Ellipsometry measurement showed that the film thickness was in linear growth. The influences of HAPI on the optical, mechanical and thermal properties of the films were investigated by UV‐Vis spectroscopy, tensile stress measurement, DSC and TGA. The obtained results showed that the optical transmittance and mechanical strength were enhanced when the film components were covalently bonded by HAPI. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 545–551     

Detection of layer‐by‐layer self‐assembly multilayer films by low‐temperature plasma mass spectrometry

The detection of layer‐by‐layer self‐assembly multilayer films was carried out using low‐temperature plasma (LTP) mass spectrometry (MS) under ambient conditions. These multilayer films have been prepared on quartz plates through the alternate assembling of oppositely charged 4‐aminothiophenol (4‐ATP) capped Au particles and thioglycolic acid (TGA) capped Ag particles. An LTP probe was used for direct desorption and ionization of chemical components on the films. Without the complicated sample preparation, the structure information of 4‐ATP and TGA on films was studied by LTP‐MS. Characteristic ions of 4‐ATP (M) and TGA (F), including [M]^+?, [M‐NH₂]⁺, [M‐HCN‐H]⁺, and [F + H]⁺, [F‐H]⁺, [F‐OH]⁺, [F‐COOH]⁺ were recorded by LTP‐MS on the films. However, [M‐CS‐H]⁺ and [F‐SH]⁺ could not be observed on the film, which were detected in the neat sample. In addition, the semi‐quantitative analysis of chemical components on monolayer film was carried out, and the amounts of 4‐ATP and TGA on monolayer surface were 45 ng/mm² and 54 ng/mm², respectively. This resulted the ionization efficiencies of 72% for 4‐ATP and 54% for TGA. In order to evaluate the reliability of present LTP‐MS, the correlations between this approach and some traditional methods, such as UV–vis spectroscopy, atomic force microscope and X‐ray photoelectron spectroscopy were studied, which resulted the correlation coefficients of higher than 0.9776. The results indicated that this technique can be used for analyzing the films without any pretreatment, which possesses great potential in the studies of self‐assembly multilayer films. Copyright © 2013 John Wiley & Sons, Ltd.     

Electropolymerization of layer‐by‐layer precursor polymer films

The layer‐by‐layer (LbL) self‐assembly has been used to fabricate polymer thin films on any solid substrates. The multilayer polymer thin films are constructed by alternating adsorption of anionic and cationic polymers. Polyelectrolyte multilayer ultrathin films containing anionic poly[2‐(thiophen‐3‐yl)ethyl methacrylate‐co‐methacrylic acid]; P(TEM‐co‐MA) and cationic poly[4‐(9H‐carbazol‐9‐yl)‐N‐butyl‐4‐vinyl pyridium bromide]; P4VPCBZ, were fabricated. The growth of multilayer ultrathin films was followed by UV–Vis absorption spectrophotometer and surface plasmon resonance spectroscopy (SPR). The deposition of P(TEM‐co‐MA)/P4VPCBZ as multilayer self‐assembled ultrathin films regularly grow which showed linear growth of absorbance and thickness with increasing the number of layer pair. Cross‐linking of the layers was verified by cyclic voltammetry (CV), UV–Vis spectrophotometry and electrochemical surface plasmon resonance (EC‐SPR) spectroscopy with good electro‐copolymerizability. This was verified by spectroelectrochemistry. The SPR angular‐reflectivity measurement resulted in shifts to a higher reflectivity according to the change in the dielectric constant of the electropolymerized film. Copyright © 2011 John Wiley & Sons, Ltd.     

Preparation and characterization of layer‐by‐layer self‐assembly membrane based on sulfonated polyetheretherketone and polyurethane for high‐temperature proton exchange membrane

A concept of preparing high‐temperature proton exchange membranes with layer‐by‐layer (LBL) self‐assembly technique was proposed and the sulfonated polyetheretherketone (SPEEK) and polyurethane (PU) with 200 LBL deposition cycles denoting (SPEEK/PU)₂₀₀ membrane was prepared in this research. Owing to the strong electrostatic interaction between ? group in SPEEK and ? C? N⁺ group in PU, (SPEEK/PU)₂₀₀ membrane with LBL self‐assembly structure showed a favorable structural stability. The phosphoric acid (PA)‐doped (SPEEK/PU)₂₀₀ membrane showed a higher proton conductivity relative to PA doped SPEEK/PU membrane by solution casting method (SPEEK/PU)₂₀₀/40%PA membrane possessed a proton conductivity value of 2.90 × 10^?2 S/cm at 150 °C under anhydrous conditions. The LBL self‐assembly structure provided a possibility to reduce the negative effect from polymer skeleton blocking charge carrier species even immobilizing protons. Moreover, the (SPEEK/PU)₂₀₀ membrane presented the particularly noteworthy mechanical property even with PA doping. The tensile stress values at break were 72.8 and 24.1 MPa, respectively, for (SPEEK/PU)₂₀₀ and (SPEEK/PU)₂₀₀/40%PA membrane at room temperature, which were obviously higher than the reported values of 15.9 and 2.81 MPa for SPEEK/PU and SPEEK/PU/60%PA membrane. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3446–3454     

Functional membranes prepared by layer‐by‐layer assembly and its metal ions adsorption property

PVDF/(PEI‐C/PAA)_n functional membranes were prepared by layer‐by‐layer (LbL) assembly, and their heavy metal ions adsorption capability was investigated. The changes in the chemical compositions of membrane surfaces were determined by X‐ray photoelectron spectroscopy (XPS). XPS results show that the surface of the PVDF membrane can be alternatively functionalized by PEI‐C and PAA. The membrane surface hydrophilicity was evaluated through water contact angle measurement. Contact angle results show that the surface hydrophilicity of the membrane surface depends on the outermost deposited layer. Morphological changes of membrane surfaces were observed by scanning electron microscopy (SEM). The water fluxes for these membranes were elevated after modification. The performances of the PVDF/(PEI‐C/PAA)_n membranes on the adsorption of copper ions (Cu²⁺) from aqueous solutions were investigated by inductively coupled plasma (ICP). The results indicate that the PVDF/(PEI‐C/PAA)_n functional membranes show high copper ions adsorption ability. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and magnetic properties of organic multilayer films based on the layer‐by‐layer assembly

Two polymers containing pyridine rings were prepared by free‐radical polymerization and confirmed by Fourier transform infrared and ¹H NMR spectra. The preparation of four multilayer films that were obtained by self‐assembly of the polymer and the transition metal neutralized polyelectrolyte on PE substrate was described. UV–vis spectra and atomic force microscopy images were applied to characterize these films and indicate the uniform assembling process. The driving force for building up the multilayer films was identified by infrared spectroscopy to be the coordination interaction. The magnetic behavior was examined as a function of magnetic field strength at 30 kOe and as a function of temperature (5–300 K). All films display strong soft ferromagnetic properties and higher than those of the bulk materials. The magnetic results show that the layer‐by‐layer self‐assembling approach is beneficial to the ordered alignment of adjacent paramagnetic spins and induces better magnetic phenomena. Copyright © 2015 John Wiley & Sons, Ltd.     

Layer‐by‐layer assembly of readily detachable chitosan and poly(acrylic acid) polyelectrolyte multilayer films

Free‐standing layer‐by‐layer (LbL) assembled thin films have recently found utility in a broad range of applications. Previously reported free‐standing LbL films have generally required covalent modifications to improve aqueous stability and render these films suitable for biomedical applications. Here, we engineered chitosan and poly(acrylic acid) containing polyelectrolyte multilayer films, which are readily detached from hydrophilic silicon in aqueous conditions. These films demonstrate remarkable stability over 28 days in simulated in vivo conditions (pH 7.4, phosphate buffered saline at 37 °C) without the incorporation of any covalent crosslinking modifications. These films exhibit moduli (27–420 kPa) resembling that of many biological tissues including tendon, show high visible light transmittance of greater than 50%, and prevent fibronectin adsorption. The properties of this new detachable LbL film architecture indicate its promise for use in a variety of applications, particularly in medicine and biotechnology. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 127–131     

Layer‐by‐layer assembly of gelatin

Electrostatic assembly of one species can be realized using gelatin as a polyampholyte. Under suitable conditions where the electrostatic attraction and repulsion were both significant and in balance, linear growth of multilayers driven by electrostatic interactions was sustained over many successive assembly steps, and the maximum amount of adsorption of each layer was reached when the solution pH was around the isoelectric point. The rearrangement of the adsorbed chains after drying was confirmed by contact angle analysis. In addition with only one species involved, the assembled thin films should be chemically uniform rather than layered. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1252–1257, 2008     

Stimuli‐responsive micelles of amphiphilic AMPS‐b‐AAL copolymers in layer‐by‐layer films

Aqueous reversible addition‐fragmentation chain transfer polymerization was used to synthesize poly(N‐[3‐(dimethylamino)propyl]acrylamide) (PDMAPA) cationic homopolymers and micelle‐forming, pH‐responsive, amphiphilic diblock copolymers of poly(sodium 2‐acrylamido‐2‐methyl‐1‐propanesulfonate‐block‐N‐acryloyl‐L ‐alanine) (P(AMPS‐b‐AAL)). At low pH, the AAL blocks are protonated rendering them hydrophobic, whereas the AMPS blocks remain anionically charged because of the pendant sulfonate groups. Self‐assembly results in core–shell micelles consisting of hydrophobic cores of AAL and negatively charged shells of AMPS. Using solutions of these micelles with anionic coronas and of the cationic homopolymer PDMAPA, layer‐by‐layer (LbL) films were assembled at low pH, maintaining the micelle structures. Several block copolymers with varying AMPS and AAL block lengths were synthesized and used in the formation of LbL films. The thickness and morphology of the films were examined using ellipsometry and atomic force microscopy. The stimuli‐responsive behavior can be triggered by submersion of the film in water at neutral pH to disrupt the micelles. This behavior was monitored by observing the decrease in film thickness and alteration of the film morphology. The micelles were also loaded with a model hydrophobic compound, pyrene, and incorporated into LbL films. The release of pyrene from the films was monitored by fluorescence spectroscopy at varying pH values (1, 3, 5, and 7). As the pH of the solution increases, the rate of release increases. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Electrorheological properties of carbon nanotube/polyelectrolyte self‐assembled polystyrene particles by layer‐by‐layer assembly

Sulfonated polystyrene (PS) particles were prepared by the sulfonation of PS microspheres with H₂SO₄. Then, composite particles were synthesized by layer‐by‐layer (LbL) self‐assembly with funtionalized multiwall carbon nanotubes (fMCNTs) and polyelectrolytes on sulfonated PS particles. The amount of fMCNTs on PS particles was adjusted by controlling the number of fMCNT layers by LbL self‐assembly. Composite particles were characterized by ζ‐potential analysis, scanning electron microscopy, and thermal analysis. The electrorheological (ER) properties of composite particles in insulating oil was investigated with varying the number of fMCNT layers under controlled electric fields. It was observed that the number of fMCNT layers was a critical factor to determine the ER properties of composite particles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1058–1065, 2008     

Influence of graphene oxide incorporation and chemical cross‐linking on structure and mechanical properties of layer‐by‐layer assembled poly(Vinyl alcohol)‐Laponite free‐standing films

Functional fillers in multilayered films provide opportunity in tailoring the mechanical properties through chemical cross‐linking. In this study, Laponite‐graphene oxide co‐dispersion was used to incorporate graphene oxide (GO) easily into polyvinyl alcohol (PVA)/Laponite layer‐by‐layer (LBL) films. The LBL films were found to be uniform and the layer thickness increased linearly with number of depositions. The process was extended to a large number of depositions to investigate the macroscopic mechanical properties of the free‐standing films. The LBL films showed remarkable improvements in mechanical properties as compared to neat PVA film. The GO‐incorporated LBL films displayed higher enhancements in the tensile strength, ductility, and toughness as compared to that of PVA/Laponite LBL films, upon chemical cross‐linking. This suggests the advantageous effects of GO incorporation. Interestingly, cross‐linking of LBL films for longer time period (>1 h) and higher temperature (～80 °C) was not found to be much beneficial. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2377–2387     

Construction of Polycation‐Based Non‐Viral DNA Nanoparticles and Polyanion Multilayers via Layer‐by‐Layer Self‐Assembly

Summary: The multilayers of polycation‐based non‐viral DNA nanoparticles and biodegradable poly(L ‐glutamic acid) (PGA) were constructed by a layer‐by‐layer (LbL) technique. Poly(ethyleneimine) (PEI) was used to condense DNA to develop non‐viral DNA nanoparticles. AFM, UV‐visible spectrometry, and TEM measurements revealed that the PEI‐DNA nanoparticles were successfully incorporated into the multilayers. The well‐structured, easily processed multilayers with the non‐viral DNA nanoparticles may provide a novel approach to precisely control the delivery of DNA, which may have great potential for gene therapy applications in tissue engineering, medical implants, etc.

A TEM image of the cross section of a (PGA/PEI‐DNA nanoparticle)₂₀ multilayer.     

Layer‐by‐layer self‐assembly of a novel covalent organic frameworks microextraction coating for analyzing polycyclic aromatic hydrocarbons from aqueous solutions via gas chromatography

In this study, a new covalent organic framework, consisting of tetra(4‐aminophenyl)porphyrin and tris(4‐formyl phenyl)amine, was layer‐by‐layer immobilized on stainless‐steel wire as a coating for microextraction. The fabrication process was easy and controllable under mild conditions. The as‐grown fiber was applied to extract polycyclic aromatic hydrocarbons in aqueous solution via head‐space solid‐phase microextraction. Furthermore, it was analyzed by gas chromatography with a flame ionization detector. A wide linear range (0.1–50 µg/L), low limits of detection (0.006–0.024 µg/L, signal‐to‐noise ratio = 3), good repeatability (intra‐fiber, n = 6, 3.1–8.50%), and reproducibility (fiber to fiber; n = 3, 5.79–9.98%), expressed as relative standard deviations, demonstrate the applicability of the newly developed coating. This new material was successfully utilized in real sample extraction with a satisfactory result. Potential parameters affecting the extraction efficiency, including extraction temperature and extraction time, salt concentration, agitation speed, sample volume, desorption temperature, and time, were also optimized and discussed.     

Spectroscopic Interrogation of Layer-by-layer Assembled Films of Conjugated Polyelectrolytes

Layer-by-layer fluorescent conjugated polyelectrolyte films have been studied. The photoluminescence of conjugate polyelectrolytes was observed to be highly tunable during this film assembly process. Efficient photoinduced electron transfer from thus prepared highly luminescent film to a natural electron-transfer protein cytochrome c has also been observed.     

The fabrication of layer‐by‐layer mode LaCoO3 film by pulsed laser deposition

The relationship between strain and growth conditions in LaCoO₃ thin film was obtained to control the magnetic‐electric characteristics. The LaCoO₃ thin films on the SrTiO₃ substrates have been achieved by the pulsed laser deposition method, and the reflection high‐energy electron diffraction method (RHEED) was applied to monitor the growth process in situ; the layer‐by‐layer growth mode was discovered. The X‐ray diffraction and atomic force microscopy were applied to the phase analysis, and the layer thickness and the layer‐by‐layer growth mode were uncovered. Compared with the 100‐nm LaCoO₃ thin films, the strain in the layer‐by‐layer ultra thin film was more controllable. The enhanced magnetic properties of the layer‐by‐layer mode ultra‐thin films could be tested in future work.     

Layer—by—layer Multilaryer Films Self—assembled from a Rare—earth—containing Poly—oxometalate,Na9[Eu（W5O18）2] and Poly （allylamine hydrochloride） and Their Photoluminescent Properties

Ultrathin multilayer films of a rare-earth-containing polyoxometalate Na9[Eu(W5O18)2](EW) and poly (allymamine hydrochloride)(PAH) have been prepared by layer-by-layer self-assembly from dilute aqueous solution.The fabrication process of the EW/PAH multilaryer films was followed by UV-vis spectroscopy and ellipsometry,which show that the deposition process is linear and highly reproducible from layer to layer.An average EW/PAH bilayer thickness of ca.2.1nm was determined by ellipsometry.In addition,the scanning electron microscopy(SEM) image of the EW/PAH film indicates that the film surface is relatively uniform and smooth.The photoluminescent properties of these films were also investigated by fluorescence spectroscopy.     

Molecular layer‐by‐layer deposition of highly crosslinked polyamide films

A molecular layer‐by‐layer (mLbL) deposition process is demonstrated to synthesize conformal coatings of crosslinked polyamide. This process controls the rapid reaction of trimesoyl chloride and m‐phenylene diamine, unlike interfacial polymerization techniques which produce rough films and poorly defined network structure. Layer‐by‐layer polyamide films appear structurally similar to interfacially polymerized films with a linear film growth rate of ≈0.9 nm per cycle. Films made by mLbL deposition show a 70‐fold decrease in surface roughness as compared to a commercial, interfacially polymerized polyamide. Surface chemistry could be controlled based on which reaction step was performed last, leading to amine or carboxylic acid rich surfaces. With the ability to control chemical structure throughout the crosslinked network, this technique provides new routes to build polyamide films and improve analysis techniques for commercial applications such as reverse osmosis membranes. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Properties of a novel thermal sensitive polymer based on poly(vinyl alcohol) and its layer‐by‐layer assembly

Structurally modified poly(vinyl alcohol) (PVA) was prepared as novel thermally sensitive polymers by partially acetalyzing and/or ionizing the commercially available PVA. Their aqueous solutions experience completely reversible polymer aggregation and dissolution above and below the lower critical solution temperature (LCST), respectively. The LCST of a partially acetalyzed PVA (APVA) can be readily controlled by the degree of acetalysis or the molecular weight of the starting PVA. Introduction of a small amount of cationic group onto the APVA backbone increases the LCST obviously, while the LCST is highly sensitive to NaCl concentration. Then APVA and cationic APVA multilayers are assembled on rayon to make a thermal responsive fiber. The atomic force microscopy (AFM) images of the surface reveal the increment of roughness stimulated by temperature. Copyright © 2007 John Wiley & Sons, Ltd.     

Self‐assembly of metal–organic framework thin films containing metalloporphyrin and their photocatalytic activity under visible light

With [5,10,15,20‐tetra(4‐carboxyphenyl)porphyrin]Mn(III) and sterically controlled 2,2¢‐dimethyl‐4,4¢‐pyridine as the main raw materials, metal–organic framework thin films containing metalloporphyrin (MnPor‐MOF) with catalytically active sites were built up on functionalized quartz glass surfaces using a layer‐by‐layer self‐assembly method. Retaining active catalytic sites and having a porous reticular structure, the MnPor‐MOF films possessed remarkable photocatalytic activity for oxidative degradation of methylene blue in the presence of hydrogen peroxide under visible‐light irradiation. Most meaningfully, the MnPor‐MOF films were highly stable and simply and conveniently reusable, and are thus a potentially new organic material for photocatalytic wastewater treatment. Copyright © 2015 John Wiley & Sons, Ltd.