Phenyliodine(III) Bis(Trifluoroacetate) Mediated Synthesis of 2‐Aryl‐1,2‐Benzisothiazol‐3(2H)‐Ones in Ionic Liquid

Treatment of N‐aryl‐2‐(benzylthio)benzamides with phenyliodine(III) bis(trifluoroacetate) containing trifluoroacetic acid resulted in an interrupted Pummerer‐type reaction in ionic liquid 1‐n‐butyl‐3‐methylimidazolium hexafluorophosphate, [bmim][PF₆] to give 2‐aryl‐1,2‐benzisothiazol‐3(2H)‐ones rather than the normal Pummerer‐type products.     

A Detailed Study of the (Electro)chemical Behavior of Bis(trifluoromethanesulfonyl)imide Based Ionic Liquids at Different Purification Steps

A systematic investigation of the major impurities content as well as of their effect on the electrochemical behavior of synthesized N‐butyl‐N‐methylpyrrolidinium (Py_1.4), N‐(2‐methoxyethyl)‐N‐methylpyrrolidinium (Py_1.102) and 1‐butyl‐3‐methylimidazolium (bmim) bis(trifluoromethanesulfonyl)imide has been carried out and the efficacy of an optimized multistep purification protocol for obtaining ILs suitable for electrochemical applications has been verified.     

Synthesis,Structure, and Physico‐optical Properties of Manganate(II)‐Based Ionic Liquids

Several ionic liquids (ILs) based on complex manganate(II) anions with chloro, bromo, and bis(trifluoromethanesulfonyl)amido (Tf₂N) ligands have been synthesized. As counterions, n‐alkyl‐methylimidazolium (C_nmim) cations of different chain length (alkyl=ethyl (C₂), propyl (C₃), butyl (C₄), hexyl (C₆)) were chosen. Except for the 1‐hexyl‐3‐methylimidazolium ILs, all of the prepared compounds could be obtained in a crystalline state at room temperature. However, each of the compounds displayed a strong tendency to form a supercooled liquid. Generally, solidification via a glass transition took place below ?40 °C. Consequently, all of these compounds can be regarded as ionic liquids. Depending on the local coordination environment of Mn²⁺, green (tetrahedrally coordinated Mn²⁺) or red (octahedrally coordinated Mn²⁺) luminescence emission from the ⁴T(G) level is observed. 1 The local coordination of the luminescent Mn²⁺ centre has been unequivocally established by UV/Vis as well as Raman and IR vibrational spectroscopies. Emission decay times measured at room temperature in the solid state (crystalline or powder) were generally a few ms, although, depending on the ligand, values of up to 25 ms were obtained. For the bromo compounds, the luminescence decay times proved to be almost independent of the physical state and the temperature. However, for the chloro‐ and bis(trifluoromethanesulfonyl)amido ILs, the emission decay times were found to be dependent on the temperature even in the solid state, indicating that the measured values are strongly influenced by nuclear motion and the vibration of the atoms. In the liquid state, the luminescence of tetrahedrally coordinated Mn²⁺ could only be observed when the tetrachloromanganate ILs were diluted with the respective halide ILs. However, for [C₃mim][Mn(Tf₂N)₃], in which Mn²⁺ is in an octahedral coordination environment, a weak red emission from the pure compound was found even in the liquid state at elevated temperatures.     

Speciation of Rare‐Earth Metal Complexes in Ionic Liquids: A Multiple‐Technique Approach

The dissolution process of metal complexes in ionic liquids was investigated by a multiple‐technique approach to reveal the solvate species of the metal in solution. The task‐specific ionic liquid betainium bis(trifluoromethylsulfonyl)imide ([Hbet][Tf₂N]) is able to dissolve stoichiometric amounts of the oxides of the rare‐earth elements. The crystal structures of the compounds [Eu₂(bet)₈(H₂O)₄][Tf₂N]₆, [Eu₂(bet)₈(H₂O)₂][Tf₂N]₆?2H₂O, and [Y₂(bet)₆(H₂O)₄][Tf₂N]₆ were found to consist of dimers. These rare‐earth complexes are well soluble in the ionic liquids [Hbet][Tf₂N] and [C₄mim][Tf₂N] (C₄mim=1‐butyl‐3‐methylimidazolium). The speciation of the metal complexes after dissolution in these ionic liquids was investigated by luminescence spectroscopy, ¹H, ¹³C, and ⁸⁹Y NMR spectroscopy, and by the synchrotron techniques EXAFS (extended X‐ray absorption fine structure) and HEXS (high‐energy X‐ray scattering). The combination of these complementary analytical techniques reveals that the cationic dimers decompose into monomers after dissolution of the complexes in the ionic liquids. Deeper insight into the solution processes of metal compounds is desirable for applications of ionic liquids in the field of electrochemistry, catalysis, and materials chemistry.     

Physical and CO2-Absorption Properties of Imidazolium Ionic Liquids with Tetracyanoborate and Bis(trifluoromethanesulfonyl)amide Anions

Ionic liquids with tetracyanoborate ([TCB]^?) and bis(trifluoromethanesulfonyl)amide ([Tf₂N]^?) anions generally have low viscosities and high CO₂ capacities, and thus they are attractive solvents for CO₂-related applications. Herein, we have investigated physical and CO₂-absorption properties of 1-ethyl-3-methylimidazolium tetracyanoborate ionic liquid ([emim][TCB]) to discuss the anion effects of [TCB]^? in comparison with the previous results of [emim][Tf₂N]. The density, viscosity, electrical conductivity, and isobaric molar heat capacity were measured as a function of temperature at atmospheric pressure. [emim][TCB] has both lower density and isobaric molar heat capacity than [emim][Tf₂N]. [emim][TCB] shows superior transport properties (lower viscosity and higher electrical conductivity) compared to [emim][Tf₂N], whereas the Walden plots of molar conductivity against fluidity (reciprocal of viscosity) have smaller values in [emim][TCB] than in [emim][Tf₂N] at certain fluidities. The high-pressure CO₂ solubilities were also determined in [emim][TCB]. The mole fraction scaled solubility of CO₂ in [emim][TCB] is slightly larger than that in [emim][Tf₂N] at certain pressures and temperatures. The former ionic liquid shows much higher molarity scaled solubility of CO₂ than the latter because of the smaller molar volume. It is suggested that both anions have similar strength of intermolecular interaction with CO₂ and comparable changes in the solvent structure between neat and CO₂ solution, in view of the thermodynamic parameters of dissolution.     

Nucleophilic substitution of chlorobis(4-methoxyphenyl)methane: reactivity of carbenium ions in ILs-trifluoroethanol mixtures

The ionization of chlorobis(4-methoxyphenyl)methane (1-Cl) was performed in 1:1 mixtures of TFE/ILs (ILs = [emim][Tf₂N], [bmim][Tf₂N], [bpy][Tf₂N]), and TFE/CH₃CN. The decay of the immediately formed carbenium ion 1⁺ was followed by stopped flow, showing that the lifetime of this intermediate significantly decreases on going from CH₃CN to [emim][Tf₂N]. Ab initio calculations suggest an increase in the electrophilicity of the carbenium ion in ILs.     

Ionothermal Synthesis of a NaCl‐type Topological Network Based on Trinuclear Cobalt(II) Clusters as Nodes

A new metal‐organic network [Co₃(tbip)₃(H₂O)₄] · 2H₂O ( 1 ) (H₂tbip = 5‐tert‐butyl‐isophthalic acid) was synthesized through the ionothermal reaction of H₂tbip, cobalt nitrate, and [bmim]Br ionic liquid ([bmim]Br = 1‐butyl‐3‐methylimidazolium bromide). It exhibits a three‐dimensional (3D) framework with NaCl topology based on trinuclear cobalt(II) clusters as nodes. The magnetic studies show that there exist antiferromagnetic interactions between the Co^II ions.     

Vapochromic Ionic Liquids from Metal–Chelate Complexes Exhibiting Reversible Changes in Color,Thermal, and Magnetic Properties

Vapor‐ and gas‐responsive ionic liquids (ILs) comprised of cationic metal‐chelate complexes and bis(trifluoromethanesulfonyl)imide (Tf₂N) have been prepared, namely, [Cu(acac)(BuMe₃en)][Tf₂N] ( 1 a ), [Cu(Bu‐acac)(BuMe₃en)][Tf₂N] ( 1 b ), [Cu(C₁₂‐acac)(Me₄en)][Tf₂N] ( 1 c ), [Cu(acac)(Me₄en)][Tf₂N] ( 1 d ), and [Ni(acac)(BuMe₃en)][Tf₂N] ( 2 a ) (acac=acetylacetonate, Bu‐acac=3‐butyl‐2,4‐pentanedionate, C₁₂‐acac=3‐dodecyl‐2,4‐pentanedionate, BuMe₃en=N‐butyl‐N,N′,N′‐tetramethylethylenediamine, and Me₄en=N,N,N′,N′‐trimethylethylenediamine). These ILs exhibited reversible changes in color, thermal properties, and magnetic properties in response to organic vapors and gases. The Cu^II‐containing ILs are purple and turn blue‐purple to green when exposed to organic vapors, such as acetonitrile, methanol, and DMSO, or ammonia gas. The color change is based on the coordination of the vapor molecules to the cation, and the resultant colors depend on the coordination strength (donor number, DN) of the vapor molecules. The vapor absorption caused changes in the melting points and viscosities, leading to alteration in the phase behaviors. The IL with a long alkyl chain ( 1 d ) transitioned from a purple solid to a brown liquid at its melting point. The Ni^II‐containing IL ( 2 a ) is a dark red diamagnetic liquid, which turned into a green paramagnetic liquid by absorbing vapors with high DN. Based on the equilibrium shift from four‐ to six‐coordinated species, the liquid exhibited thermochromism and temperature‐dependent magnetic susceptibility after absorbing methanol.     

Acceleration of the Baylis–Hillman Reaction in the Presence of Ionic Liquids

The Baylis–Hillman reaction is accelerated in the presence of ionic liquids. Of various 1‐butyl‐3‐methylimidazolium (bmim)‐based ionic liquids tested, [bmim][PF₆] has been found to result in the highest rate increase. In the company of Lewis acid and H‐bond‐donor additives, the reaction rates further improve, albeit only modestly. A preparatively useful Baylis–Hillman procedure prescribes the use of [bmim][PF₆] with La(OTf)₃ and 2,2′2″‐nitrilotris[ethanol], in which the net effect of the ionic liquid is to bring about a more than twofold rate increase over the otherwise same reaction in MeCN.     

Synthesis of 2‐Phenylthiazoles from α‐Tosyloxyketones and Thiobenzamide in [Bmim][PF6] Ionic Liquid at Ambient Temperature

The room temperature ionic liquid, 1‐n‐butyl‐3‐methylimidazolium hexafluorophosphate [bmim][PF₆] is used as a ‘green’ recyclable alternative to classical molecular solvents for the cyclocondensation of α‐tosyloxyketones with thiobenzamide to prepare 2‐phenylthiazoles in good yields.     

Ionic Liqids in Organic Synthesis: The Pummerer Reaction

Pummerer‐type reaction was carried out with α‐acyl sulfides and phenyliodine(III) bis(trifluoroacetate) (PIFA) instead of α‐acyl sulfoxides in the room temperature ionic liquid 1‐n‐butyl‐3‐methylimidazolium hexafluorophosphate [bmim][PF₆] under mild conditions to give the ene adducts 3 in good yields.     

离子液体-水介质中离子液体负载TEMPO催化选择氧化合成脂肪醇羟基芳香醛和酮

由于脂肪醇羟基和苄醇羟基具有相同的氧化反应活性,所以当分子内同时含有脂肪醇羟基和苄醇羟基时,很难选择氧化苄醇羟基合成含脂肪醇羟基的芳香醛或酮。本文报道了在离子液体-水介质中,NCS/NaBr/IL-TEMPO（离子液体负载TEMPO）催化氧化合成含有脂肪醇羟基的芳香醛、酮的方法,反应条件温和,选择性好,收率高,且离子液体和催化剂可以循环使用。     

Polymerization of phenylacetylene catalysed by RhTp(cod) and RhBp(cod) in ionic liquids: effect of alcohols and of tetraammonium halides

RhTp(cod) ( 1 ) and RhBp(cod) ( 2 ), almost inactive in CH₂Cl₂, became good catalysts of phenylacetylene polymerization in ionic liquids ([bmim]Cl, [bmim]BF₄: bmim = 1‐butyl‐3‐methylimidazolium, [mokt]BF₄: mokt = 1‐methyl‐3‐oktylimidazolium, [bumepy]BF₄: 1‐butyl‐4‐methylpyridinium) and in CH₂Cl₂ in the presence of tetraammonium halides ([R₄N]X, R = Bu, Et; X = Cl, Br). The highest yields of polyphenylacetylene with catalyst 1 were obtained in [bmim]Cl at 65°C (64% after 2 h) and in [mokt]BF₄ at 20°C (56% after 24 h). In alcohols (CH₃OH, (CH₃)₂CHOH, (CH₃)₃COH) as solvents, up to 100% of the polymer was produced. When a mixture of an ionic liquid and CH₃OH was used as the reaction medium, the polymer yield was similar to the yield achieved in an ionic liquid only, but the molecular weight increased remarkably. Tetraammonium salts, [R₄N]X, are co‐catalysts for 1 , and the yield of the polymer increased in the order [Et₄N]Br < [Bu₄N]Br < [Et₄N]Cl < [Bu₄N]Cl. Polymers with molecular weights from 6900 to 38 800 Da were obtained with catalyst 2 in [R₄N]Br or [R₄N]Cl, whereas in ionic liquids ([bmim]Cl, [bmim]BF₄) the corresponding molecular weights were higher, from 51 300 to 60 300 Da. Copyright © 2004 John Wiley & Sons, Ltd.     

Laser-induced fluorescence and infrared spectroscopic studies on the specific solvation of tris(1-(2-thienyl)-4,4,4-trifluoro-1,3-butanedionato)europium(III) in an ionic liquid

The extraction constant and the two-phase stability constant (K_D,Mβ₃) of tris(2-thenoyltrifluoroacetonato)europium(III) between 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C₄mim][Tf₂N]) as an ionic liquid and an aqueous phase were determined by considering the extraction equilibria including anionic tetrakis(2-thenoyltrifluoroacetonato)europate(III). Specific solute-solvent interactions between the neutral Eu(III) chelate and [C₄mim][Tf₂N] molecules were revealed from the relationships between the distribution constant of the enol form of 2-thenoyltrifluoroacetone (Htta) as a proton chelate and the distribution constant (K_D,M) of the neutral Eu(III) chelate because the [C₄mim][Tf₂N] system gave the high K_D,Mβ₃ value compared with those in conventional molecular solvents such as benzene and 1,2-dichloroethane. The coordination environment of Eu³⁺ in the neutral Eu(III) chelate in [C₄mim][Tf₂N] was investigated by time-resolved laser-induced fluorescence spectroscopy and infrared absorption spectroscopy. Both methods consistently indicated that not only the Eu(III) chelate extracted but also Eu(tta)₃(H₂O)₃ synthesized as a solid crystal were almost completely dehydrated in [C₄mim][Tf₂N] saturated with water. Consequently, the higher K_D,M or extractability of the neutral Eu(III) chelate in the [C₄mim][Tf₂N] system can be ascribed to the dehydration of the Eu(III) chelate, which is caused by the specific solvation with [C₄mim][Tf₂N] molecules.     

Physical Vapor Deposition of [EMIM][Tf2N]: A New Approach to the Modification of Surface Properties with Ultrathin Ionic Liquid Films

Ultrathin films of the ionic liquid (IL) 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide, [EMIM][Tf₂N], are prepared on a glass substrate by means of an in situ thermal‐evaporation/condensation process under ultrahigh‐vacuum conditions. By using X‐ray photoelectron spectroscopy (XPS), it is demonstrated that the first layer of the IL film grows two dimensionally, followed by the three‐dimensional growth of successive layers. The first molecular layer consists of a bilayer, with the [EMIM]⁺ cations in contact to the surface and the [Tf₂N]^? anions at the vacuum side. The ultrathin IL films are found to be stable under ambient conditions.     

Role of the Surfactant Structure in the Behavior of Hydrophobic Ionic Liquids within Aqueous Micellar Solutions

The behavior of an ionic liquid (IL) within aqueous micellar solutions is governed by its unique property to act as both an electrolyte and a cosolvent. The influence of the surfactant structure on the properties of aqueous micellar solutions of zwitterionic SB‐12, nonionic Brij‐35 and TX‐100, and anionic sodium dodecyl sulfate (SDS) in the presence of the “hydrophobic” IL 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim][PF₆]) is assessed along with the possibility of forming oil‐in‐water microemulsions in which the IL acts as the “oil” phase. The solubility of [bmim][PF₆] within aqueous micellar solutions increases with increasing surfactant concentration. In contrast to anionic SDS, the zwitterionic and nonionic surfactant solutions solubilize more [bmim][PF₆] at higher concentrations and the average aggregate size remains almost unchanged. The formation of IL‐in‐water microemulsions when the concentration of [bmim][PF₆] is above its aqueous solubility is suggested for nonionic Brij‐35 and TX‐100 aqueous surfactant solutions.     

Abrasive Stripping Voltammetric Studies of Lignin and Lignin Model Compounds

Lignin is potentially a major renewable, nonfossil source of aromatic and cyclohexyl compounds. In this study, we have investigated the abrasive stripping voltammetry of lignin and four lignin model compounds in the room temperature ionic liquids (RTILs) [C₄mim][NTf₂], [N_6,2,2,2][NTf₂] and [C₄mim][OTf] (where [C₄mim]⁺=1‐butyl‐3‐methylimidazolium, [N_6,2,2,2]⁺=n‐hexyltriethylammonium, [NTf₂]^?=bis(trifluoromethanesulfonyl)imide and [OTf]^? =trifluoromethanesulfonate) on a gold macrodisk and in 0.1 M H₂SO₄ and 0.1 M NaOH on a boron‐doped diamond (BDD) macroelectrode, with the hope of using the voltammetry to fingerprint the functional groups within the lignin molecule. The use of RTILs on metal electrodes, or either acidic or basic media in combination with BDD electrodes allows solvent systems with wide electrochemical potential windows, useful for studying voltammetry which may be difficult to observe in systems where early breakdown of the solvent occurs.     

离子液体中一步合成14-芳基-1,6,7,14-四氢二苯并[a, i]吖啶-1,6-二酮衍生物

室温条件下在离子液体[bmim]BF4中合成了14-芳基-1,6,7,14-四氢二苯并[a, i]吖啶-1,6-二酮类衍生物,该方法具有产率高,反应介质可回收使用,反应底物范围广,反应时间短,操作简单等优点。     

NMR Diffusion Measurements as a Simple Method to Examine Solvent–Solvent and Solvent–Solute Interactions in Mixtures of the Ionic Liquid [Bmim][N(SO2CF3)2] and Acetonitrile

The self‐diffusion coefficients of each component in mixtures of 1‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide ([Bmim][N(SO₂CF₃)₂]) and acetonitrile were determined. The results suggest that the hydrodynamic boundary conditions change from “stick” to “slip” as the solvent composition transitions from “ionic liquid dissolved in acetonitrile” (χ_IL<0.4) to “acetonitrile dissolved in ionic liquid” (χ_IL>0.4). At higher χ_IL, the acetonitrile species are affected by “cage” and “jump” events, as the acetonitrile molecules reside nearer to the charged centre on the ions than in the “non‐polar” regions. The self‐diffusion coefficients of hexan‐1‐amine, dipropylamine, 1‐hexanol and dipropylether in mixtures of [Bmim][N(SO₂CF₃)₂] and acetonitrile were determined. In general, the nitrogen‐containing solutes were found to diffuse slower than the oxygen‐containing solutes; this indicates that there are greater ionic liquid–N interactions than ionic liquid–O interactions. This work demonstrates that the self‐diffusion coefficients of species can provide valuable information about solvent–solvent and solvent–solute interactions in mixtures containing an ionic liquid.     

Insights into the Mechanism of Extraction of Uranium (VI) from Nitric Acid Solution into an Ionic Liquid by using Tri‐n‐butyl phosphate

We present new results on the liquid–liquid extraction of uranium (VI) from a nitric acid aqueous phase into a tri‐n‐butyl phosphate/1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (TBP/[C₄mim][Tf₂N]) phase. The individual solubilities of the ionic‐liquid ions in the upper part of the biphasic system are measured over the whole acidic range and as a function of the TBP concentration. New insights into the extraction mechanism are obtained through the in situ characterization of the extracted uranyl complexes by coupling UV/Vis and extended X‐ray absorption fine structure (EXAFS) spectroscopy. We propose a chemical model to explain uranium (VI) extraction that describes the data through a fit of the uranyl distribution ratio D_U. In this model, at low acid concentrations uranium (VI) is extracted as the cationic complex [UO₂(TBP)₂]²⁺, by an exchange with one proton and one C₄mim⁺. At high acid concentrations, the extraction proceeds through a cationic exchange between [UO₂(NO₃)(HNO₃)(TBP)₂]⁺ and one C₄mim⁺. As a consequence of this mechanism, the variation of D_U as a function of TBP concentration depends on the C₄mim⁺ concentration in the aqueous phase. This explains why noninteger values are often derived by analysis of D_U versus [TBP] plots to determine the number of TBP molecules involved in the extraction of uranyl in an ionic‐liquid phase.