Computer‐aided design and synthesis of CdTe@SiO2 core–shell molecularly imprinted polymers as a fluorescent sensor for the selective determination of sulfamethoxazole in milk and lake water

In this work, a molecular dynamics simulation method was introduced to compute the preassembled system of molecular imprinted polymers for sulfamethoxazole monomer. The results revealed that the ratio of sulfamethoxazole as template molecule to 3‐aminopropyltriethoxysilane as functional monomer to tetraethylorthosilicate as cross‐linker of 10:10:40 led to the most stable template‐functional monomer cluster. Based on the result of computational simulation, CdTe@SiO₂ core–shell imprinted polymers, a cadmium telluride quantum dots layer on the surface of aminofunctionalized SiO₂, were synthesized as the fluorescent sensor. Then, a series of measures were used to characterize the structure and morphology to get optimal sensors. The concentration range was 5.0–30.0 μmol/L between molecular imprinted polymers at CdTe at SiO₂, and sulfamethoxazole of the fluorescence intensity. To further verify the reliability and accuracy of the fluorescent sensor, the application was successfully by analyzing sulfamethoxazole in pure milk and lake water. The results showed the recoveries were above 96.89% with a relative standard deviation of 1.25–5.45%, and the fluorescence sensor with selective recognition provides an alternative solution for the determination of sulfamethoxazole.     

Synthesis of well‐defined cyclodextrin‐core star polymers

The synthesis of 21‐arm methyl methacrylate (MMA) and styrene star polymers is reported. The copper (I)‐mediated living radical polymerization of MMA was carried out with a cyclodextrin‐core‐based initiator with 21 independent discrete initiation sites: heptakis[2,3,6‐tri‐O‐(2‐bromo‐2‐methylpropionyl]‐β‐cyclodextrin. Living polymerization occurred, providing well‐defined 21‐arm star polymers with predicted molecular weights calculated from the initiator concentration and the consumed monomer as well as low polydispersities [e.g., poly(methyl methacrylate) (PMMA), number‐average molecular weight (M_n) = 55,700, polydispersity index (PDI) = 1.07; M_n = 118,000, PDI = 1.06; polystyrene, M_n = 37,100, PDI = 1.15]. Functional methacrylate monomers containing poly(ethylene glycol), a glucose residue, and a tert‐amine group in the side chain were also polymerized in a similar fashion, leading to hydrophilic star polymers, again with good control over the molecular weight and polydispersity (M_n = 15,000, PDI = 1.03; M_n = 36,500, PDI = 1.14; and M_n = 139,000, PDI = 1.09, respectively). When styrene was used as the monomer, it was difficult to obtain well‐defined polystyrene stars at high molecular weights. This was due to the increased occurrence of side reactions such as star–star coupling and thermal (spontaneous) polymerization; however, low‐polydispersity polymers were achieved at relatively low conversions. Furthermore, a star block copolymer consisting of PMMA and poly(butyl methacrylate) was successfully synthesized with a star PMMA as a macroinitiator (M_n = 104,000, PDI = 1.05). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2206–2214, 2001     

Anionic synthesis and detection of fluorescence‐labeled polymers with a terminal anhydride group

To monitor polymer–polymer coupling reactions between two different monofunctional polymers in dilute polymer blends, fluorescence‐labeled anhydride‐functional polystyrene (PS) and poly(methyl methacrylate) (PMMA) were prepared by conventional anionic polymerization. Sequential trapping of lithiopolystyrene by 1‐(2‐anthryl)‐1‐phenylethylene (APE) and then di‐t‐butyl maleate (4) provided, after pyrolysis, anhydride‐functional fluorescent PS. Fluorescent PMMA anhydride (8) was synthesized with sec‐butyllithium/APE as an initiator for the anionic polymerization of methyl methacrylate, trapping by 4, and pyrolysis. These polymers could be reacted with amine‐functional polymers by melt blending, and the reaction progress could be monitored by gel permeation chromatography coupled with fluorescence detection. This technique not only allows monitoring of the coupling reaction with high sensitivity (ca. 100 times more sensitive than refractive index detection) but also permits selective detection because unlabeled polymers are invisible to fluorescence detection. This highly sensitive and selective detection methodology was also used to monitor the coupling reaction of 8 with PS‐NH₂ at a thin‐film interface, which was otherwise difficult to detect by conventional methods. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2177–2185, 2000     

Synthesis of insoluble polystyrene‐supported flavins and their catalysis in aerobic reduction of olefins

2′,4′‐p‐Vinylbenzylideneriboflavin ( 2′,4′‐PVBRFl ) was prepared as a flavin‐containing monomer and copolymerized with divinylbenzene and styrene or its p‐substituted derivatives such as 4‐acetoxystyrene, 4‐vinylbenzyl alcohol, and 4‐vinylbenzoic acid to give the corresponding non‐functionalized and functionalized PS‐DVB‐supported flavins PS(H)‐DVB‐Fl , PS(OAc)‐DVB‐Fl , PS(CH₂OH)‐DVB‐Fl , and PS(COOH)‐DVB‐Fl , respectively. PS(OH)‐DVB‐Fl was also prepared by hydrolysis of PS(OAc)‐DVB‐Fl under basic conditions. These novel flavin‐containing insoluble polymers exhibited characteristic fluorescence in solid state, except PS(OH)‐DVB‐Fl , and different catalytic activities in aerobic reduction of olefins by in situ generated diimide from hydrazine depending on their pendant functional group. For example, PS(H)‐DVB‐Fl was found to be particularly effective for neutral hydrophobic substrates, which could be readily recovered by a simple filtration and reused more than 10 times without loss in catalytic activity. On the other hand, PS(OH)‐DVB‐Fl and PS(COOH)‐DVB‐Fl proved to be highly active for phenolic substrates known to be less reactive in the reaction with conventional non‐supported flavin catalysts. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1706–1713     

Tunable fluorescence conjugated copolymers consisting of tetraphenylethylene and fluorene units: From aggregation‐induced emission enhancement to dual‐channel fluorescence response

A series of new conjugated polymers PTPE_xF_y, which consist of tetraphenylethylene (TPE) units and fluorene (F) units, have been designed and synthesized by Suzuki cross‐coupling polymerization. The polymers PTPE_xF_y exhibited aggregation‐induced emission enhancement and dual‐channel fluorescence response (DCFR) when they were aggregated in solution, and these properties are related with their TPE‐to‐F ratio in the polymer backbone. For PTPE and PTPE_0.5F_0.5 , the fluorescence emission was enhanced by aggregation when water was added into their THF solutions. For the copolymers PTPE_0.3F_0.7 , PTPE_0.2F_0.8 , and PTPE_0.1F_0.9 , the DCFRs were observed when they were aggregated by adding water into their solution, which can be attributed to the different responses of fluorene segments and TPE segments to aggregation. The fluorene segments have an aggregation‐caused quenching characteristic, whereas the TPE segments have an aggregation‐induced emission characteristic. According to the fluorescence lifetime and quantum yield data of the polymer solutions, we have discovered that the polymer's natural life time increases as its TPE content increases. In the solid film, PTPE_0.3F_0.7 and PTPE_0.2F_0.8 showed better quantum yield than other polymers, due to the combination of the excellent fluorescent property of the fluorene groups and the nonplanar conformation of the TPE groups. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and characterization of chiral polymer complexes incorporating polybinaphthyls,bipyridine, and Eu(III)

Chiral conjugated polymers P‐1 and P‐2 were synthesized by the polymerization of (S)‐3,3′‐diiodo‐2,2′‐bisbutoxy‐1,1′‐binaphthyl and (S)‐6,6′‐dibromo‐2,2′‐bisbutoxy‐1,1′‐binaphthyl, respectively, with 5,5′‐divinyl‐2,2′‐bipyridine through a Heck cross‐coupling reaction. Chiral polymer complexes P‐C‐1 and P‐C‐2 were obtained by the bipyridine chelating coordination of P‐1 and P‐2 with Eu(TTA)₃·2H₂O (where TTA is 2‐thenoyltrifluoroacetonate). Polymers P‐1 and P‐2 and polymer complexes P‐C‐1 and P‐C‐2 exhibited intense circular dichroism signals, with negative and positive Cotton effects in their circular dichroism spectra. The chiral polymers showed strong green‐blue fluorescence because of the efficient energy migration from the extended π‐electronic structure of the conjugated polymer main to the chiral binaphthyl core. The chiral polymer complexes could have not only polymer fluorescence but also the characteristic fluorescence of Eu(III) (⁵D₀→⁷F₂) at a different excited wavelength. These kinds of chiral polymer complexes incorporating polybinaphthyls, bipyridine, and Eu(III) moieties are expected to provide an understanding of the relationship between the structure and properties of chiral polymer complexes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 650–660, 2007     

Delivery systems for some biologically active 1,2,4‐triazine derivatives: synthesis and release

Triazine‐loaded polymer microparticles composed of cross‐linked polymethylmethacrylate (PMMA) have been prepared. A series of PMMA cross‐linked polymers were prepared from methylmethacrylate (MMA) and divinylbenzene (DVB) by suspension polymerization using different percentages of solvents and cross‐linkers. Biologically active compounds including 4‐amino‐6‐substituted‐3‐thioxo‐3,4‐dihydro‐2H‐5‐oxo (or thioxo)‐1,2,4‐triazines (I–IV) were prepared and reacted with PMMA. Since optimization of the polymer delivery system is required to improve clinical applications, the effect of surface area, cross‐linker percentage on the loading, and release of triazines were studied. Alkaline conditions seem to favorably affect triazine release. Triazine hydrochlorides were ion exchanged with sodium montmorillonite (Na‐MMT). X‐ray diffraction (XRD) analysis confirms the intercalation of triazines between the layers of MMT. The presence of mineral domains with an average size of 33 nm was observed by transmission electron microscopy (TEM). The release of triazine compounds is more controllable in intercalated layered silicates. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of Novel Core Cross‐Linked Star‐Based Polyrotaxane End‐Capped via “CuAAC” Click Chemistry

The first example of core cross‐linked star (CCS) polyrotaxane was prepared using the poly(ϵ‐caprolactone) (PCL) CCS three‐dimensional (3D) scaffold. The 3D CCS polymer was firstly prepared through the “arm‐first” approach. Then, the “arms” of the resultant PCL CCS polymer were threaded with α‐cyclodextrins (α‐CDs). The threaded α‐CDs were permanently locked by the “click” reaction of terminal alkyne functionalities of the star polymers with the azide‐functionalized end caps to afford the CCS polyrotaxanes. All analytical results confirm the formation of the CCS polyrotaxanes and reveal their characteristics, including fluorescence under UV, a channel‐type crystalline structure, a two‐step thermal decomposition, and a unique core‐shell structure in great contrast to the polymer precursors.     

Hydroxyl‐ and amine‐terminated hyperbranched polyurethanes using AB2‐type azide monomers: Synthesis,characterization, fluorescence,and charge‐transfer complexation studies

Novel AB₂‐type azide monomers such as 3,5‐bis(4‐methylolphenoxy)carbonyl azide (monomer 1) , 3,5‐bis(methylol)phenyl carbonyl azide (monomer 2) , 4‐(methylol phenoxy) isopthaloyl azide (monomer 3) , and 5‐(methylol) isopthaloyl azide (monomer 4) were synthesized. Melt and solution polymerization of these monomers yielded hydroxyl‐ and amine‐terminated hyperbranched polyurethanes with and without flexible ether groups. The structures of theses polymers were established using FT‐IR and NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 3.2 × 10³ to 5.5 × 10⁴ g/mol depending on the experimental conditions used. The thermal properties of the polymers were evaluated using TGA and DSC: the polymer obtained from monomer ( 1 ) exhibited lowest T_g and highest thermal stability and the polymer obtained from monomer ( 2 ) registered the highest T_g and lowest thermal stability. All the polymers displayed fluorescence maxima in the 425–525 nm range with relatively narrow peak widths indicating that they had pure and intense fluorescence. Also, the polymers formed charge transfer (CT) complexes with electron acceptor molecules such as 7,7,8,8‐tetracyano‐quino‐dimethane (TCNQ) and 1,1,2,2‐tetracyanoethane (TCNE) as evidenced by UV‐visible spectra. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3337–3351, 2009     

Synthesis of AB3‐type miktoarm star polymers with steroid core via a combination of “Click” chemistry and ring opening polymerization techniques

Well‐defined AB₃‐type miktoarm star‐shaped polymers with cholic acid (CA) core were fabricated with a combination of “click” chemistry and ring opening polymerization (ROP) methods. Firstly, azide end‐functional poly(ethylene glycol) (mPEG), poly(methyl methacrylate) (PMMA), polystyrene (PS), and poly(ε‐caprolactone) (PCL) polymers were prepared via controlled polymerization and chemical modification methods. Then, CA moieties containing three OH groups were introduced to these polymers as the end groups via Cu(I)‐catalyzed click reaction between azide end‐functional groups of the polymers ( mPEG‐N₃ , PMMA‐N₃ , PS‐N₃ , and PCL‐N₃ ) and ethynyl‐functional CA under ambient conditions, yielding CA end‐functional polymers ( mPEG‐Cholic , PMMA‐Cholic , PS‐Cholic , and PCL‐Cholic ). Finally, the obtained CA end‐capped polymers were employed as the macroinitiators in the ROP of ε‐caprolactone (ε‐CL) yielding AB₃‐type miktoarm star polymers ( mPEG‐Cholic‐PCL₃ , PMMA‐Cholic‐PCL₃ , and PS‐Cholic‐PCL₃ ) and asymmetric star polymer [ Cholic‐(PCL)₄ ]. The chemical structures of the obtained intermediates and polymers were confirmed via Fourier transform infrared and ¹H nuclear magnetic resonance spectroscopic techniques. Thermal decomposition behaviors and phase transitions were studied in detail using thermogravimetric analysis and differential scanning calorimetry experiments. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3390–3399     

Synthesis of hollow crosslinked miktoarm polymer using miniemulsion as templates

Hollow crosslinked polymers (HCPs) were synthesized using arm first method via atom transfer radical polymerization. The polymerization process was performed in miniemulsion system, in which the macroinitiator, PEG‐Br, was in the water phase, whereas the vinyl‐monomer, 4‐vinylpyridine (4VP), and the crosslinker, DVB, were in the butanone phase. TEM images and light scattering characterization showed that the resultant polymer contained a hollow space, and the volume of the hollow space could be adjusted by changing the ratio of water to butanone. Also, hollow crosslinked Miktoarm polymers (HCMPs) were synthesized through this method when two different macroinitiators, PEG‐Br and PNIPAM‐Br, were used to coinitiate the polymerization of the vinyl‐monomer, 4VP and DVB. The ¹H NMR spectra showed that the hollow polymers contained both PEG arms and PNIPAM arms. The hollow morphologies of the resultant Miktoarm polymers were the same as the HCPs. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1651–1660, 2009     

Facile synthesis of hyperbranched poly(p‐phenyleneethynylene‐alt‐m‐phenyleneethynylene) with narrow dispersity and high branching degree by sonogashira polymerization of an AB2 monomer

An AB₂ monomer PhBr₂  C  C  Ph  C  CH containing one acetylene group and two bromide groups was efficiently synthesized by a strategy based on the different reactivity between aromatic iodide and bromide in Sonogashira reaction. The Sonogashira polymerization of PhBr₂  C  C  Ph  C  CH was investigated to get hyperbranched poly(p‐phenyleneethynylene‐alt‐m‐phenyleneethynylene) (hb‐PMPE) in terms of the effects of monomer addition method, core molecule with different functionality, and ratio of [monomer]/[core molecule]. The results showed that narrow dispersities (D) (D: 1.23∼1.50) were obtained by slow monomer addition and with core molecule. Bifunctional core molecule induced narrower dispersity than monofunctional core molecule. The molecular weight of hb‐PMPE increased with increasing ratio of [monomer]/[core molecule], however, a negative deviation from calculated value was observed. The dispersity slightly increased with increasing [monomer]/[core molecule]. When the ratio of [monomer]/[core molecule] was below 50/1, monomodal distribution was observed; whereas when the ratio increased to 70/1, bimodal distribution was obtained. All the polymers showed degrees of branching (DBs) around 0.6. The hb‐PMPEs showed one major absorption band with λ_max around 330 nm, and emission band with λ_max around 390 nm. All the polymers showed relative quantum yields (Φ_r) above 0.5 in dilute THF solution. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 96–104     

High fluorescent ethyl acrylate modified PEDOT‐MeNH2 with enhanced electrochromic performance

Two poly(2'‐aminomethyl‐3,4‐ethylenedioxythienylene) (PEDOT‐MeNH₂) derivatives were successfully synthesized by electrochemical polymerization of precursors, diethyl 3'‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl) methyl)azanediyl)dipropanoate ( monomer 1 ) and ethyl 3‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl) methyl)amino)propanoate ( monomer 2 ), respectively. Structure–property relationships of monomers and polymers, including electrochemical, optical properties, and morphology, were systematically explored. Significantly, the designed polymers exhibited red and orange emission signatures with high fluorescence quantum yields (Φ_F) of 0.044 and 0.045 compared with those of monomers; they may be used as building blocks for rational design of fluorescent materials. Moreover, cyclic voltammetry and spectroelectrochemistry studies demonstrated that poly(diethyl 3'‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl)methyl)azanediyl) dipropanoate) ( P1 ) and poly(ethyl 3‐(((2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐2‐yl)methyl)amino) propanoate) ( P2 ) can be reversibly oxidized and reduced accompanied by obvious color changes from light purple to light blue for P1 , and from purple to blue for P2 . Furthermore, both P1 and P2 displayed higher optical contrasts (40–70%) in the visible region, favorable coloration efficiency (typically 50–230 cm² C^?1). From these results, the two polymers would be promising candidate materials for display applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2081–2091     

PEGDA‐based luminescent polymers prepared by frontal polymerization

Frontal polymerization (FP) of poly(ethylene glycol) diacrylate (PEGDA) was carried out using benzoyl peroxide (BPO) as radical initiator. In addition, a pyrene containing monomer, 1‐pyrenebutyl acrylate (PyBuAc), was incorporated as a fluorescent probe in order to obtain luminescent materials with different chromophore contents. The resulting polymers were characterized by FT‐IR spectroscopy in the solid state and their thermal properties were determined by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Moreover, the optical properties of these materials were studied by absorption and fluorescence spectroscopy. The maximum amount of the incorporated pyrene‐containing monomer into the polymer matrix was limited to 1 wt % by the polymerization process. The obtained labeled polymers poly(PEGDA‐co‐PyBuAc) exhibited a broad absorption band at 345 nm. The fluorescence spectra of these polymers exhibited mainly “monomer emission” so that no excimer emission was observed. It is possible to tune the color of the emitted light by varying the pyrene content in the samples. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2890–2897     

Encapsulation of nanomaterials using an intermediary layer cross‐linkable ABC triblock copolymer

For the preparation of core‐shell nanoparticles containing functional nanomaterials, a photo‐cross‐linkable amphiphilic ABC triblock copolymer, poly(ethylene glycol)‐b‐poly(2‐cinnamoyloxyethyl methacrylate)‐b‐poly(methyl methacrylate) (PEG‐PCEMA‐PMMA), was synthesized. This triblock copolymer was then used to encapsulate Au nanoparticles or pyrene. The triblock copolymer of PEG‐b‐poly(2‐hydroxyethyl methacrylate)‐b‐PMMA (PEG‐PHEMA‐PMMA) (M_n = 15,800 g/mol, M_w/M_n = 1.58) was first synthesized by activators generated by electron transfer atom transfer radical polymerization. Its middle block was then functionalized with cinnamoyl chloride. The degrees of polymerization of the PEG, PHEMA, and PMMA blocks were 45, 13, and 98, respectively. PMMA‐tethered Au nanoparticles (with an average diameter of 3.0 nm) or pyrene was successfully encapsulated within the PEG‐PCEMA‐PMMA micelles. The intermediary layers of the micelles were then cross‐linked by UV irradiation. The spherical structures of the PEG‐PCEMA‐PMMA micelles containing Au nanoparticles or pyrene were not changed by the photo‐cross‐linking process and they showed excellent colloidal stability. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4963–4970, 2009     

Cross‐linking photopolymerization of monoacrylate initiated by benzophenone

The chain‐end structure of the photopolymerized acrylate using benzophenone as an initiator was investigated as well as polymerization behavior. Dodecyl acrylate was used as a monomer in this study. Gelation occurred during ultraviolet (UV) irradiation, whereas a cross‐linker was not employed. Conversion‐time profile below gel point gave a linear first‐order plot suggesting that the steady‐state was held throughout polymerization. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra of the resultant polymer indicated that most polymers had an acryloyl group at one of the chain‐ends, while some polymers had an acryloyl group at each chain‐end. The cross‐linking reaction leading to gelation would have been caused by the subsequent copolymerization of the residual monomer with the latter polymer having two acryloyl groups. Dissolved oxygen in the monomer solution influenced the polymer structure giving hydroxyl group at chain‐end. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1545–1553     

Visible light‐induced RAFT polymerization of methacrylates with benzaldehyde derivatives as organophotoredox catalysts

The benzaldehyde derivatives, such as 2,4‐dimethoxy benzaldehyde (PC1) and p‐anisaldehyde (PC2), were successfully used as photoredox catalysts (PCs) in combination with typical RAFT agent 4‐cyano‐4‐(phenylcarbonothioylthio)pentanoic acid (CTP) for the controlled photoinduced electron transfer RAFT polymerization (PET‐RAFT) of methyl methacrylate (MMA) and benzyl methacrylate (BnMA) at room temperature. The kinetics of the polymerizations showed first order with respect to monomer conversions. Besides, the average number molecular weights (M_n) of the produced polymers increased linearly with the monomer conversions and kept relatively narrow polydispersity (PDI = M_w/M_n). For example, the M_n of PMMA increased from about 3400 to 17,300 g mol⁻¹ with the increasing in monomer conversion from 11% to 85%, and the PDI maintained around 1.36. The living features of polymerizations with the PC1 and PC2 as catalysts have also been further supported by chain extension and synthesis of PMMA‐b‐PBnMA diblock copolymer. As a result, the simplicity and efficiency of benzaldehyde derivatives catalyzed PET‐RAFT polymerization have been demonstrated under mild conditions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 229–236     

Synthesis of PMMA‐b‐PBA block copolymer in homogeneous and miniemulsion systems by DPE controlled radical polymerization

In this research, poly(methyl methacrylate)‐b‐poly(butyl acrylate) (PMMA‐b‐PBA) block copolymers were prepared by 1,1‐diphenylethene (DPE) controlled radical polymerization in homogeneous and miniemulsion systems. First, monomer methyl methacrylate (MMA), initiator 2,2′‐azobisisobutyronitrile (AIBN) and a control agent DPE were bulk polymerized to form the DPE‐containing PMMA macroinitiator. Then the DPE‐containing PMMA was heated in the presence of a second monomer BA, the block copolymer was synthesized successfully. The effects of solvent and polymerization methods (homogeneous polymerization or miniemulsion polymerization) on the reaction rate, controlled living character, molecular weight (M_n) and molecular weight distribution (PDI) of polymers throughout the polymerization were studied and discussed. The results showed that, increasing the amounts of solvent reduced the reaction rate and viscosity of the polymerization system. It allowed more activation–deactivation cycles to occur at a given conversion thus better controlled living character and narrower molecular weight distribution of polymers were demonstrated throughout the polymerization. Furthermore, the polymerization carried out in miniemulsion system exhibited higher reaction rate and better controlled living character than those in homogeneous system. It was attributed to the compartmentalization of growing radicals and the enhanced deactivation reaction of DPE controlled radical polymerization in miniemulsified droplets. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4435–4445, 2009     

Highly Efficient Synthesis of Low Polydispersity Core Cross‐Linked Star Polymers by Ru‐Catalyzed Living Radical Polymerization

The efficient formation of low polydispersity core cross‐linked star (CCS) polymers via controlled/living radical polymerization (LRP) and the arm‐first approach was found to be dependant on the mediating catalyst system. The Ru catalyst, Ru(Ind)Cl(PPh₃)₂ Cat. 1 , and tertiary amine co‐catalyst were used to synthesize highly living poly(methyl methacrylate) (PMMA) macroinitiators, which were then linked together with ethylene glycol dimethacrylate (EGDMA) to form PMMA_armPEGDMA_core CCS polymers. The quantitative and near‐quantitative synthesis of CCS polymers were observed for low to moderate molecular weight macroinitiators ( = 8 and 20 kDa), respectively. Lower conversions were observed for high‐molecular weight macroinitiators ( ≥ 60 kDa). Overall, an improvement of between 10 and 20% was observed when comparing the Cat. 1 system to a conventional Cu‐catalyzed system. This significant improvement in macroinitiator‐to‐star conversion is explained in the context of catalyst system selection and CCS polymer formation.

     

Synthesis of low polydispersity polybutadiene and polyethylene stars by convergent living anionic polymerization

Star‐shaped polybutadiene stars were synthesized by a convergent coupling of polybutadienyllithium with 4‐(chlorodimethylsilyl)styrene (CDMSS). CDMSS was added slowly and continuously to the living anionic chains until a stoichiometric equivalent was reached. Gel permeation chromatography‐multi‐angle laser light scattering (GPC‐MALLS) was used to determine the molecular weights and molecular weight distribution of the polybutadiene polymers. The number of arms incorporated into the star depended on the molecular weight of the initial chains and the rate of addition of the CDMSS. Low molecular weight polybutadiene arms (M_n = 640 g/mol) resulted in polybutadiene star polymers with an average of 12.6 arms, while higher molecular weight polybutadiene arms (M_n = 16,000 g/mol) resulted in polybutadiene star polymers with an average of 5.3 arms. The polybutadiene star polymers exhibited high 1,4‐polybutadiene microstructure (88.3–93.1%), and narrow molecular weight distributions (M_w/M_n = 1.11–1.20). Polybutadiene stars were subsequently hydrogenated by two methods, heterogeneous catalysis (catalytic hydrogenation using Pd/CaCO₃) or reaction with p‐toluenesulfonhydrazide (TSH), to transform the polybutadiene stars into polyethylene stars. The hydrogenation of the polybutadiene stars was found to be close to quantitative by ¹H NMR and FTIR spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 828–836, 2006