Broadband reflection in polymer stabilized cholesteric liquid crystal cells with chiral monomers derived from cholesterol

In this study, a series of achiral monomers and chiral monomers of different flexible spacer chains based on cholesteryl moiety were synthesized. Polymer stabilized cholesteric liquid crystal (PSCLC) cells were then created by incorporation of the polymer networks. The influence of the nature of the monomers and the spacer length of chiral monomers on the reflectance properties of PSCLC was investigated as well as the polymerization condition. The results strongly suggest that the chirality of the polymer networks plays an integral role in the observed reflection spectra, and the chiral polymer networks with chiral centers separated well from the polymer backbone induce a greater change in the bulk helix pitch, and produce the broader reflection band in these LC composites. In addition, the temperature dependence of the pitch of the composites before and after polymerization was investigated. To broaden the reflection band further, the experimental processes of thermally induced pitch variation simultaneously with a UV crosslinking reaction of the composites were presented. The morphology of the polymer network in the composites was studied by scanning electron microscopy (SEM). Copyright © 2008 John Wiley & Sons, Ltd.     

Dye induced great enhancement of broadband reflection from polymer stabilized cholesteric liquid crystals

A series of polymer stabilized cholesteric liquid crystals (PSCLCs) films were prepared from cholesteric liquid crystal (Ch‐LC) mixtures containing different components such as non‐reactive LC monomer, polymerizable monomer, chiral dopant, dye, and photoinitiator upon polymerization. The influence of the polymerizable monomer and dye of Ch‐LC mixtures on the reflection properties was investigated. The reflection bandwidth for all the samples can be increased by photo‐polymerization, and the network upon polymerization derived from two different polymerizable monomers with both one and two functional groups is more effective than that from one polymerizable monomer for broadening the reflection band. Especially, a dye‐doped Ch‐LC film can reflect incident light with the bandwidth over the wavelength range of 550–2350 nm, which is due to a greater pitch gradient formed inside of Ch‐LC film. The gradient pitch network structure was firstly demonstrated by scanning electron microscopy (SEM) with the film prepared from high diacrylate monomer concentration and subsequently proved by using a wash‐out/refill method. The nematic liquid crystals monomers was infiltrated into the polymer network that was prefabricated by removing the low molar weight LCs from the original PSCLCs film, and SEM exhibited the existence of a pitch gradient across the film thickness. The refilled nematic liquid crystals film showed broadband reflection after polymerzition, too. Copyright © 2011 John Wiley & Sons, Ltd.     

Multistable polymer stabilised cholesteric liquid crystal: exceeding reflection limit in visible region

Cholesteric liquid crystal (CLC) with helically aligned molecules, demonstrates unique optical features. Conventionally, such structure reflects a maximum 50% of unpolarised light. Polymer-stabilised CLC was designed to exceed the limit by mixing liquid crystal (LC) and a photopolymerisable monomer of opposite chirality. The reflectance was carefully investigated and the result was 55.7% in the visible region at room temperature, where it exceeded the theoretical limit. Such phenomena were studied and theoretical model was discussed. Electro-optical test showed the driving voltage was of LC cell was slightly changed after polymerisation.     

Characteristics of wide-band reflection of polymer-stabilised cholesteric liquid crystal cell prepared from an unsticking technique

An unsticking technique was applied for the fabrication of a polymer-stabilised cholesteric liquid crystal (PSCLC) cell. The template of polymer matrix in the planarly aligned cholesteric liquid crystal (Ch-LC) was perfectly preserved by lifting off the hydrophilic antisticking substrate. The desired PSCLC cell could then be obtained by injecting a third Ch-LC sample between two designed templates of PSCLC layer. By adjusting the pitch distribution in the two stacking templates, a reflectivity of nearly 50% incident light could be yielded and the bandwidth of the reflection spectrum could be controlled accurately in the PSCLC cell. Thus, a method to modulate the wide-band reflection of 50% visible light flux range was offered.     

Broadband reflection characteristic of polymer-stabilised cholesteric liquid crystal with pitch gradient induced by a hydrogen bond

A polymer-stabilised cholesteric liquid crystal (PSChLC) was fabricated by ultraviolet (UV) induced polymerisation of photopolymerisable acrylate monomers mixed in a cholesteric liquid crystal (ChLC). A polymer network with a concentration gradient, which was induced by UV light absorption of dye along the propagation direction, was formed. A hydrogen bond, arising between the polymer network with a concentration gradient containing carboxyl as proton donors and chiral dopant (CD) as proton acceptors, induced a pitch gradient in PSChLC and then, as a consequence, broadband reflection. The broadband reflection is associated with the concentration and the composition of photopolymerisable acrylate monomers, the concentration of CD and the polymerisation temperature. Examining the morphologies of the polymer network by scanning electron microscopy, the helix structure and pitch gradient were verified, confirming the pitch gradient of the PSChLC and revealing the essence of the formation of broadband reflection.     

Time‐dependent deformation of structurally chiral polymer networks in stabilized cholesteric liquid crystals

Polymerization of crosslinkable liquid crystal monomers in chiral liquid crystalline media stabilizes the phase and enables distinct electro‐optic properties relative to small‐molecule analogs. Particularly interesting are cases where the polymerization forms a crosslinked polymer network that maintains a “structural” chirality. Recent reports have employed this methodology to realize a diverse set of electro‐optic responses in polymer stabilized cholesteric liquid crystals (PSCLCs) including reflection bandwidth broadening, reflection wavelength tuning, and dynamic scattering modes. It has been proposed that the mechanism at the root of these electro‐optic responses is an ion‐mediated, electromechanical deformation of the stabilizing and structurally chiral polymer network. In an effort to better understand the nature of these deformations, here we have characterized the electro‐optic response of PSCLCs with different polymer concentrations and crosslink densities. The dynamic response of PSCLCs to electric fields exhibits a time‐dependent behavior reminiscent of the creep of polymeric materials to mechanical deformations. The electro‐optic response can be described as the superposition of two contributions: the fast deformation of a relatively soft component of the polymer network (1–2 s) and the slower (10–20 s) deformation of a harder component. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1087–1093     

Short wavelength light reflecting films from side‐chain liquid crystal homopolymers with chiral spacers

A series of acrylate monomers with alkoxy tails of varying lengths are synthesised and polymerised. The butoxy analogue had a stable enantiotropic cholesteric liquid crystalline phase which formed a grandjean texture when prepared as a thin film between glass slides. The polymer was mixed with a low molar mass nematic liquid crystal in various proportions and the pitch of the chiral nematic phases were determined using a cano‐wedge cell technique. The polymer prepared from (S)‐2‐(4‐butoxyphenyl‐4′‐benzoyloxy)‐1‐methyl ethyl acrylate had a pitch length of 113 nm which indicates that the polymer film could be employed in optical devices requiring selective reflection of light with short wavelengths in the region of 170 nm. Copyright © 2001 John Wiley & Sons, Ltd.     

Preparation and characterization of polymer‐stabilized cholesteric texture cells using (+)‐bornylmethacrylate 1

Chiral monomeric (+)‐bornyl methacrylate (BMA) was synthesized from (+)‐camphor. The normal mode of polymer‐stabilized cholesteric texture (PSCT) liquid crystal cells was fabricated using 97.3 wt% of liquid crystal (E48/CB15 = 92/8) and 2.7 wt% of various compositions of chiral and achiral monomers. BMA was used as a chiral monomer and, 4,4′‐bis[6‐(acryloyloxy)hexyloxy]biphenyl and ethyleneglycol dimethacrylate were used as achiral difunctional monomers. The electro‐optical characteristics and the morphology of the PSCT cells with chiral and achiral polymer materials were investigated. The effects of monomer concentration and polymerization conditions of the chiral (+)‐bornyl methacrylate on the electro‐optical characteristics and morphology of PSCT cells were also investigated. It was found that the electro‐optical characteristics of PSCT cells were improved by using the chiral monomer of (+)‐bornyl methacrylate effectively. A PSCT cell was fabricated, and the reversible turbid and transparent changes were examined by applying a 15 V electric field. Copyright © 2000 John Wiley & Sons, Ltd.     

Effects of polymer network on electrically induced reflection band broadening of cholesteric liquid crystals

The reflection band of polymer stabilized cholesteric liquid crystals with negative dielectric anisotropy can be broadened by DC electric fields, which was ascribed to the pitch gradient caused by the motion of the structural chirality, that is, the polymer network. They systematically varied the mixture components, such as the photo‐initiator concentration, the monomer functionality, and the chiral dopant, to explore their influences on the reflection band broadening behavior. They learned how to control the polymer network morphology and ion density, which in turn determined the reflection bandwidth. By optimizing the mixture, they have greatly enhanced the broadening effect and achieved large bandwidth at low voltages. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 835–846     

Effect of Monomer Composition on the Performance of Polymer‐Stabilized Liquid Crystals with Two‐Step Photopolymerization

Polymer‐stabilized cholesteric liquid crystal (PSCLC) films with broadband reflection based on two‐step photopolymerization are fabricated. Owing to the helical twisting power (HTP) value of the chiral dopant (CD) decreasing with increasing temperature, PSCLC films with broadband reflection are obtained by two‐step polymerization anchoring helical pitch of different length at two different temperature points. The effect of monomer composition on the PSCLC reflection properties before and after polymerization was studied. The results show that the free‐radical monomers with appropriate concentration and cationic monomers with sufficient concentration are vital for the formation of PSCLC films with broadband reflection. In addition, the experiments show that the increase in the functionality and rigidity of the cationic monomer has a positive effect on the broadening of the reflection band. This study can provide guidance and reference for the selection of monomer species and concentration in PSCLC preparation. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1126–1132     

New chiral liquid crystal monomers and cholesteric polyacrylates: synthesis and characterisation

The synthesis of new chiral monomers (M₁ ?M₃ ) based on menthol and the corresponding polyacrylates (P₁ ?P₃ ) is described. The chemical structures, formula and phase behaviour of the obtained monomers and polymers were characterised with FT-IR, ¹H-NMR, elemental analyses, differential scanning calorimetry (DSC), polarising optical microscopy (POM) and X-ray diffraction (XRD). The effect of the mesogenic core rigidity, spacer length and menthyl steric effect on the phase behaviour of M₁ ?M₃ and P₁ ?P₃ is discussed. The expected mesophase of the compounds based on menthol can be obtained by inserting a flexible spacer between the mesogenic core and the terminal groups. For the chiral monomers and polyacrylates, their corresponding melting temperature (T _m), glass transition temperature (T _g) and clearing temperature (T _i) increased with an increase of the mesogenic core rigidity; while the T _m, T _g and T _i decreased with increasing the spacer length. M₁ and P₁ showed no mesophase, while M₂ and M₃ all revealed a SmC* and cholesteric phases. P₂ and P₃ only showed a cholesteric phase.     

Effects of the fluorinated liquid crystal molecules on the electro-optical properties of polymer dispersed liquid crystal films

The different fluorinated liquid crystal (LC) molecules doped to E8 were used as LC component to prepare polymer dispersed liquid crystal (PDLC) films. The mass fraction of the LC mixture is fixed 50.0 wt%. Results indicate that doping 8.0 wt% fluorinated LC molecule ME3CP to E8 significantly reduced the driving voltage of the PDLC films, and the driving voltage reduced with the rise of mass fraction of ME3CP. Besides, the terminal flexible chain length of the fluorinated LC molecule influenced the LC mixture properties based on E8, such as the dielectric anisotropy, birefringence and viscosity of the LC mixture, and the morphology and the electro-optical properties of PDLC films were controlled not only by the physical properties of the LC mixture, but also by the terminal flexible chain length of the fluorinated LC molecule .     

Synthesis,structure, and properties of chiral liquid crystal monomers and polymers based on menthol

To study structure–mesomorphism relationships of the monomers and polymers based on menthol, four new chiral monomers ( M₁ – M₄ ) and the corresponding homopolymers ( P₁ – P₄ ) with menthyl group were synthesized. Their chemical structures, formula, phase behavior, and thermal stability were characterized by FTIR, ¹H NMR, ¹³C NMR, elemental analyses, differential scanning calorimetry, polarizing optical microscopy, X‐ray diffraction, and thermogravimetric analysis. The selective reflection of light was investigated with ultraviolet/visible spectrometer. The influence of the mesogenic core rigidity, spacer length, and menthyl steric effect on the mesomorphism of M₁ – M₄ and P₁ – P₄ was examined. By inserting a flexible spacer between the mesogenic core and the terminal menthyl groups, four target monomers and polymers could form the expected mesophase. Moreover, their melting temperature (T_m), glass transition temperature (T_g), clearing temperature (T_i), and mesophase range (ΔT) increased with increasing the mesogenic core rigidity; whereas the T_m and T_g decreased, T_i and ΔT increased with an increase of the spacer length. M₁ and M₂ showed monotropic and enantiotropic cholesteric phase, respectively, whereas M₃ and M₄ all revealed chiral smectic C (SmC*), cholesteric and cubic blue phases. In addition, with increasing temperature, the selective reflection of light shifted to the long wavelength region at the SmC* phase range and to the short wavelength region at the cholesteric range, respectively. P₁ and P₂ only showed a smectic A (SmA) phase, whereas P₃ and P₄ exhibited the SmC* and SmA phases. All the obtained polymers had very good thermal stability. © 2012 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym Chem, 2012     

The effect of different arms on the properties of chiral branched-arm liquid crystals based on isosorbide as the chiral core

A new series of two-arm ( MA₁ , MA₂ ), four-arm ( MA₃ ) and six-arm ( MA₄ ) chiral liquid crystalline compounds containing isosorbide as the chiral core were synthesised. Four precursors of branched-arm A₁–A₄ were first obtained, and then were esterised separately with isosorbide to obtain four chiral branched-arm liquid crystals ( MA₁–MA₄ ). The structure and properties have been characterised. The results show that MA₁ was smectic–cholesteric phase with a fan-like and oily streak texture; MA₂–MA₄ showed a cholesteric phase with oily streak texture, or lined texture and finger print texture. Isosorbide successfully induced a cholesteric phase. The melting point and clearing point values for MA₁–MA₄ first increased and then decreased. The branched-arm and chiral core quantity affected the liquid crystalline properties. At the same time, the difference in side-arms resulted in different directions of rotation. MA₁–MA₂ showed right-handed rotation and had selective reflection; MA₃–MA₄ demonstrated left-handed rotation and did not have selective reflection.     

Dendrite-like texture growth in the nematic liquid crystal phase of 4-n-heptyl- and 4-n-octyl-oxybenzoic acids aligned by a polyimide coating

An oriented dendrite-like texture is reported, appearing at a definite temperature in the nematic phase range of 4-n-heptyl- and 4-n-octyl-oxybenzoic acids (HOBA and OOBA), aligned by rubbed polyimide and preceding the smectic C phase, on cooling. Two preferred directions with respect to the ‘easy’ axis are indicated in the dendrites grown of HOBA and OOBA. We discuss a possible mechanism, at molecular and supramolecular levels, for this dendrite growth; and assume that the building ‘blocks' of the dendrites are oligomers, or mixture of oligomers with ‘free’ closed and open dimers, constituting a detached crystalline layered state (named by us SmX, a smectic state intermediate between the N₁ ordinary nematic and SmC phases). The study of the dynamics of the dendrite growth demonstrates a scaling relationship typical for non-equilibrium systems. The observed dendrites can be considered as patterns formed in complex non-linear dissipative systems, driven outside of equilibrium.     

Synthesis and characterization of chiral azo LCPs with optical properties

ABSTRACT

In this study, we designed, synthesised and characterised two series of cholesteric liquid crystal polymers, QP series and ZP series. With polymethylhydrosiloxane as the main chain, QP series were synthesised by copolymerisation between the monomer M₁ containing a cholesteryl mesogenic unit and the monomer M₂ with a hydroxyl. ZP series, meanwhile, were synthesised by esterification between QP series members and the monomer M₃, a carboxylic acid with an azo mesogenic unit. We characterised chemical structures of all the monomers and polymers by FT-IR and ¹H-NMR, which proved that the target monomers and polymers had been obtained. We observed dramatic colour changes after the introduction of monomer M₃ and Grandjean textures from both QP series and ZP series using POM. In addition, strong selective reflection could be observed as well. Then, we characterised the thermal properties of polymers by DSC, TGA and XRD to explore their phase transition behaviours further. Their photoresponsive and photochromic properties were characterised by UV-Vis spectrum.     

Influence of cell and LC parameters on the dynamics of STN liquid crystal displays

The dynamics of super-twisted nematic (STN) liquid crystal displays have rarely been studied. In this article, the dynamic response of STN is analysed in detail. The evolution of director configuration with time was obtained by solving Ericksen–Leslie hydrodynamic equations. The time varying midlayer tilt angle is presented as a measure of dynamic response. The influence on STN dynamics of cell parameters including pretilt angle, twist angle, cell thickness, and of material parameters including d/p, K ₂₂, K ₃₃, were studied.     

近红外电致变色胆甾相液晶高分子的设计、合成及旋光开关性质

通过单体4′-甲氧基苯基-4-烯丙氧基苯甲酸酯(M1)、(S)-(-)-N-(5-己烯基)-6-(4′-(2-甲基丁氧基)苯基)-蒽醌-2,3-二羧酸酰亚胺(M2)与聚甲基氢硅氧烷间的硅氢加成反应,制得了3个新的具有近红外电致变色性质的侧链型液晶共聚物(PC5A10,PC5A20CB,PC5A30CB),并对其液晶性,电化学,光谱电化学和旋光开关性质进行了表征.当M2单体的含量为10mol%,20mol%时,共聚物可形成胆甾相液晶,而当其含量为30mol%时,所能形成的液晶相为近晶A相.3个共聚物的循环伏安曲线均出现了两对可逆的氧化还原峰,分别对应于蒽醌酰亚胺基团得电子而形成自由基阴离子和二价阴离子.中性态时,共聚物在420nm处有较强吸收,而当被还原为自由基阴离子后,在近红外区域840nm出现了新的强烈的吸收.以聚合物为阴极电致变色层,普鲁士蓝为离子储存层的全固态电致变色器件在800nm有较好的光学调制性.此外,本文还就该器件的电化学调控手性光开关性质进行了初步研究.     

The role of crosslinking and polarity in the dark relaxation of azobenzene-based,polymer-stabilised cholesteric liquid crystals

Prior examinations have reported that polymer stabilisation of azobenzene-based cholesteric liquid crystal (CLC) mixtures can reduce the time necessary for complete colour restoration in the dark from three days to as few as five minutes. This work extends upon these prior examinations by exploring and elucidating the role of crosslinker concentration and monomer polarity on the colour restoration of a representative CLC mixture composed of a high HTP bis(azo) binapthanyl chiral dopant (QL76) mixed into the cyanobiphenyl nematic liquid crystal host MDA-00-1444. The impact of these variables was unexpectedly convoluted. In all the formulations examined here, polymer stabilisation dramatically reduces the time for complete colour restoration of the starting reflection notch. In mixtures based on nonpolar liquid crystal monomers, increasing the crosslinker concentration reduces the time necessary for complete colour restoration. However, the dependence on crosslinker concentration reverses in mixtures composed from polar liquid crystal monomers in which increasing the crosslinker concentration serves to increase the time necessary for complete colour restoration.     

固化条件对聚合物分散液晶膜电光性能的影响

选用聚乙二醇二缩水甘油醚(EGDE)/季戊四醇缩水甘油醚(PERTGE)/1,8-二氨基-3,6-二氧杂辛烷(EDBEA)/向列相液晶(SLC1717)复合体系,在不同的固化条件下,通过热聚合诱导相分离方法制备了一系列电光性能不同的聚合物分散液晶(polymer dispersed liquid crystal,简称PDLC)膜.研究了固化温度和固化时间对制备的PDLC膜中聚合物网络的微观形貌和电光性能的影响.结果表明,随着固化温度的升高以及固化时间的缩短,PDLC膜的对比度、驱动电压和开态响应时间逐渐增大,而关态响应时间逐渐减小.在固化温度为363.2 K,固化时间为7 h时,所制备的PDLC膜具有较佳的电光性能.