Syntheses and antitumor activities of polymers containing amino acid and 5‐fluorouracil moieties

The new monomer, 3,6‐endo‐methylene‐1,2,3,6‐tetrahydrophthalimidoethanoyl‐5‐fluorouracil (ETEFU), was synthesized from 5‐fluorouracil (5‐FU) and 3,6‐endo‐methylene‐1,2,3,6‐tetrahydophthalimidoethanoyl chloride (ETEC). Its homopolymer and copolymers with acrylic acid (AA) and vinyl acetate (VAc) were prepared by photopolymerization reactions using 2,2‐dimethoxy‐2‐phenylacetophenone (DMP) as the photoinitiator. The synthesized ETEFU and polymers were identified by FT‐IR, ¹H‐NMR, and ¹³C‐NMR spectra. The contents of ETEFU units in poly(ETEFU‐co‐AA) and poly(ETEFU‐co‐VAc) were 20 and 17 mol%, respectively. The number‐average molecular weights of the synthesized polymers determined by gel permeation chromatography (GPC) were 4,600 to 10,700 g mol⁻¹. In vitro cytotoxicities of samples were evaluated with cancer cell lines [mouse mammary carcinoma (FM3A), mouse leukemia (P388), and human histiocytic lymphoma (U937)] and a normal cell line [mouse liver cells (AC2F)]. Cytotoxicities of 5‐FU and synthesized samples against the cancer cell lines were ranked as follows: ETEFU > poly(ETEFU) > 5‐FU > poly(ETEFU‐co‐AA) > poly(ETEFU‐co‐VAc). The in vivo antitumor activities of poly(ETEFU) and poly(ETEFU‐co‐AA) against Balb/C mice bearing the sarcoma 180 tumor cells were greater than those of 5‐FU at all doses except for the activity of poly(ETEFU) at 0.8 mg/kg. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1589–1595, 1999     

Competitive heavy metal removal by poly(2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid‐co‐itaconic acid)

The competitive removal of Pb²⁺, Cu²⁺, and Cd²⁺ ions from aqueous solutions by the copolymer of 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid (AMPS) and itaconic acid (IA), P(AMPS‐co‐IA), was investigated. Homopolymer of AMPS (PAMPS) was also used to remove these ions from their aqueous solution. In the preparation of AMPS–IA copolymer, the molar percentages of AMPS and IA were 80 and 20, respectively. In order to observe the changes in the structures of polymers due to metal adsorption, FTIR spectra by attenuated total reflectancetechnique and scanning electron microscopy (SEM) pictures of the polymers were taken both before and after adsorption experiments. Total metal ion removal capacities of PAMPS and P(AMPS‐co‐IA) were 1.685 and 1.722 mmol Me²⁺/g_polymer, respectively. Experimental data were evaluated to determine the kinetic characteristics of the adsorption process. Competitive adsorption of Pb²⁺, Cu²⁺, and Cd²⁺ ions onto both PAMPS and P(AMPS‐co‐IA) was found to fit pseudo‐second‐order type kinetics. In addition, the removal orders in the competitive adsorption of these metal ions onto PAMPS and P(AMPS‐co‐IA) were found to be Cd²⁺ > Pb²⁺ > Cu²⁺ and Pb²⁺ > Cd²⁺ > Cu²⁺, respectively. Copyright © 2008 John Wiley & Sons, Ltd.     

Syntheses,antitumor activities,and antiangiogenesis of a monomer and its medium molecular weight polymers: Maleimidoethanoyl‐5‐fluorouracil and its polymers

A new monomer, maleimidoethanoyl‐5‐fluorouracil (MIEFU), was synthesized by the reaction of maleimidoethanoyl chloride and 5‐fluorouracil (5‐FU). The homopolymer of MIEFU and its copolymers with acrylic acid (AA) or vinyl acetate (VAc) were prepared by photopolymerizations with 2,2‐dimethoxy‐2‐phenylacetophenone as an initiator at 25 °C for 48 h. The structures of the synthesized monomer and polymers were identified by Fourier transform infrared, ¹H NMR, and ¹³C NMR spectroscopies and elemental analysis. The contents of the MIEFU units in poly(MIEFU‐co‐AA) and poly(MIEFU‐co‐VAc) were 18 and 30 mol %, respectively. The number‐average molecular weights of the synthesized polymers, as determined by gel permeation chromatography, ranged from 4900 to 9800. The in vitro cytotoxicities of the samples against mouse mammary carcinoma (FM3A), mouse leukemia (P388), and human histiocytic lymphoma (U937) cancer cell lines decreased in the following order: 5‐FU ≥ MIEFU > poly(MIEFU) > poly(MIEFU‐co‐AA) > poly(MIEFU‐co‐VAc). The in vivo antitumor activities of the polymers against Balb/C mice bearing the sarcoma 180 tumor cells were greater than those of 5‐FU at all the doses tested. The inhibitions of the SV40 DNA replication of the samples were much greater than that of the control. The synthesized monomer and polymers showed more antiangiogenesis activity than the control. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1247–1256, 2000     

Time-dependent Cu-induced gelation of poly(ethylene-alt-maleic acid) in aqueous solution

The complexation of Cu²⁺ ions with an alternating copolymer of maleic acid (MAc) and ethylene in aqueous solution was followed through turbidimetry and absorption spectrophotometry as a function of the polymer concentration and the metal ion-to-polymer molar ratio, r. The introduction of Cu²⁺ ions was performed in aqueous solution through neutralization of the polyacid with Cu(OH)₂ powder. A gelation window between homogeneous and phase-separated solutions was observed in the phase diagram of the polymer/Cu²⁺ mixture and the viscoelastic properties of the hydrogels were evaluated through rheology measurements. It is found that the stiffness of the hydrogels can be tuned by the polymer concentration and the mixing ratio r. Moreover, the stiffness of the hydrogels increases substantially with time. In fact, this time evolution may be as long as one month or longer if the composition of the aqueous solution is close to the gelation threshold. The gelation properties can be qualitatively explained from the possible formation of binuclear polymer/Cu²⁺ complexes in aqueous solutions, as indicated from the absorption spectroscopy results.     

Mn2(CO)10‐induced controlled/living radical copolymerization of vinyl acetate and methyl acrylate: Spontaneous formation of block copolymers consisting of gradient and homopolymer segments

The controlled/living radical polymerization of vinyl acetate (VAc) and its copolymerization with methyl acrylate (MA) were investigated in bulk or fluoroalcohols using manganese complex [Mn₂(CO)₁₀] in conjunction with an alkyl iodide (R? I) as an initiator under weak visible light. The manganese complex induced the controlled/living radical polymerization of VAc even in the fluoroalcohols without any loss of activity. The R? I/Mn₂(CO)₁₀ system was also effective for the copolymerization of MA and VAc, in which MA was consumed faster than VAc, and then the remaining VAc was continuously and quantitatively consumed after the complete consumption of MA. The ¹H and ¹³C NMR analyses revealed that the obtained products are block copolymers consisting of gradient MA/VAc segments, in which the VAc content gradually increases, and homopoly(VAc). The use of fluoroalcohols as solvents increased the copolymerization rate, controllability of the molecular weights, and copolymerizability of VAc. The saponification of the VAc units in poly(MA‐grad‐VAc)‐block‐poly(VAc) resulted in the corresponding poly(MA‐co‐γ‐lactone)‐block‐poly(vinyl alcohol) due to the intramolecular cyclization between the hydroxyl and neighboring carboxyl groups in the gradient segments. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1343–1353, 2009     

Syntheses,antitumor activities,and antiangiogenesis of exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidoethanoyl‐ 5‐fluorouracil and its polymers

A new monomer, exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidoethanoyl‐5‐fluorouracil (ETFU), was synthesized by the reaction of exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidoethanoyl chloride (ETPC) and 5‐fluorouracil (5‐FU). The homopolymer of ETFU and its copolymers with acrylic acid (AA) and vinyl acetate (VAc) were prepared via photopolymerizations with 2,2‐dimethoxy‐2‐phenylacetophenone at 25 °C for 48 h. The structures of the synthesized monomer and polymers were identified by Fourier transform infrared, ¹H NMR, and ¹³C NMR spectroscopy and elemental analysis. The ETFU contents in poly(ETFU‐co‐AA) and poly(ETFU‐co‐VAc) were 26 mol % and 26 mol %, respectively. The number‐average molecular weights of the polymers, as determined by gel permeation chromatography, ranged from 5600 to 17,000. The in vitro cytotoxicities of 5‐FU and the synthesized samples against mouse mammary carcinoma and human histiocytic lymphoma cancer cell lines increased in the following order: ETFU > 5‐FU > poly(ETFU‐co‐AA) > poly(ETFU) > poly(ETFU‐co‐VAc). The in vivo antitumor activities of the polymers against Balb/C mice bearing the sarcoma 180 tumor cells were greater than those of 5‐FU at all doses tested. The inhibitions of the samples for SV40 DNA replication and antiangiogenesis were much greater than the inhibition of the control. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4272–4281, 2000     

Radical copolymerization of novel trifluorovinyl ethers with ethyl vinyl ether and vinyl acetate: Estimating reactivity ratios and understanding reactivity behavior of the propagating radical

Two novel trifluorovinyl ether (TFVE) monomers were copolymerized with either ethyl vinyl ether (EVE) or vinyl acetate (VAc) in a redox‐initiated aqueous emulsion: 1‐(2‐phenoxyethoxy)‐1,2,2‐trifluoroethene (Ph‐TFVE) and 1‐[2‐(2‐ethoxyethoxy)ethoxy]‐1,2,2‐trifluoroethene (Et‐TFVE). Previous studies demonstrated a propensity for radical hydrogen abstraction from the oligoether pendant group during the homopolymerization of Et‐TFVE with continued propagation of the resulting radical, thereby providing the rationale to investigate the copolymerization of our new TFVEs with EVE or VAc. Reactivity ratios were estimated using the error‐in‐variables model from a series of bulk free radical copolymerizations of Ph‐TFVE with EVE or VAc. The reactivity ratios were r_Ph‐TFVE = 0.25 ± 0.07, r_EVE = 0.016 ± 0.04; r_Ph‐TFVE = 0.034 ± 0.04, r_VAc =0.89 ±0.08. Partial hydrolysis of polymers containing VAc to vinyl alcohol (VA) resulted in two terpolymers: poly(Ph‐TFVE‐co‐VAc‐co‐VA) and poly(Et‐TFVE‐co‐VAc‐co‐VA), respectively. We investigated the possibility of hydrogen abstraction from VAc during polymerization by comparing the molar mass before and after hydrolysis. Abstraction from VAc was not apparent during polymerization; however, abstraction from the oligoether pendant group of Et‐TFVE was again evident and was more significant for those copolymers having a greater fraction of Et‐TFVE in the monomer feed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1344–1354, 2000     

Copper(II) Complexes with N‐(9‐anthracenyl)‐N′‐(3‐pyridyl)urea (L) and a Derivative of L: Synthesis,Structure, and Fluorescent Properties

Three copper(II) complexes, [Cu₂(OAc)₄L₂] · 2CH₃OH ( 1 ), [CuBr₂L′₂(CH₃OH)] · CH₃OH ( 2a ), and [CuBr₂L′₂(DMSO)] · 0.5CH₃OH ( 2b ) {L = N‐(9‐anthracenyl)‐N′‐(3‐pyridyl)urea and L′ = N‐[10‐(10‐methoxy‐anthronyl)]‐N′‐(3‐pyridyl)urea} have been synthesized by the reaction of L with the corresponding copper(II) salts. Complex 1 shows a dinuclear structure with a conventional “paddlewheel” motif, in which four acetate units bridge the two Cu^II ions. In complexes 2a and 2b , the anthracenyl ligand L has been converted to an anthronyl derivative L′, and the central metal ion exhibits a distorted square pyramidal arrangement, with two pyridyl nitrogen atoms and two bromide ions defining the basal plane and the apical position is occupied by a solvent molecule (CH₃OH in 2a and DMSO in 2b ).     

Binding of Cu+ and Cu2+ with peptides: Peptides = oxytocin,Arg8‐vasopressin,bradykinin, angiotensin‐I,substance‐P,somatostatin, and neurotensin

The intrinsic binding ability of 7 natural peptides (oxytocin, arg⁸‐vasopressin, bradykinin, angiotensin‐I, substance‐P, somatostatin, and neurotensin) with copper in 2 different oxidation states (Cu^I/II) derived from different Cu^+/2+ precursor sources have been investigated for their charge‐dependent binding characteristics. The peptide‐Cu^I/II complexes, [M − (n‐1)H + nCu^I] and [M − (2n‐1)H + nCu^II], are prepared/generated by the reaction of peptides with CuI solution/Cu‐target and CuSO₄ solution and are analyzed by using matrix‐assisted laser desorption/ionization (MALDI) time‐of‐flight mass spectrometry. The MALDI mass spectra of both [M − (n‐1)H + nCu^I] and [M − (2n‐1)H + nCu^II] complexes show no mass shift due to the loss of ─H atoms in the main chain ─NH of these peptides by Cu⁺ and Cu²⁺ deprotonation. The measured m/z value indicates the reduction of Cu^I/II oxidation state into Cu⁰ during MALDI processes. The number and relative abundance of Cu⁺ bound to the peptides are greater compared with the Cu²⁺ bound peptides. Oxytocin, arg⁸‐vasopressin, bradykinin, substance‐P, and somatostatin show the binding of 5Cu⁺, and angiotensin‐I and neurotensin show the binding of 7Cu⁺ from both CuI and Cu targets, while bradykinin shows the binding of 2Cu²⁺, oxytocin, arg⁸‐vasopressin, angiotensin‐I, and substance‐P; somatostatin shows the binding of 3Cu²⁺; and neurotensin shows 4Cu²⁺ binding. The binding of more Cu⁺ with these small peptides signifies that the bonding characteristics of both Cu⁺ and Cu²⁺ are different. The amino acid residues responsible for the binding of both Cu⁺ and Cu²⁺ in these peptides have been identified based on the density functional theory computed binding energy values of Cu⁺ and the fragment transformation method predicted binding preference of Cu²⁺ for individual amino acids.     

A novel binuclear copper complex incorporating a nalidixic acid derivative displaying a one‐dimensional coordination polymeric structure

The identification of the antibacterial action of nalidixic acid (nx) was central to the development of the quinolone antibacterial compounds. The ability of the nx naphthyridyl ring to interact with and inhibit some proteins has encouraged the investigation of similar structures in the search for more active compounds with less adverse effects. The possibility of structural modification by attachment of other biologically active moieties to the naphthyridyl ring of nx allowed the development of new active antimicrobial molecules. Hydrazone derivatives of nx can be synthesized easily based on the condensation of the hydrazide derivative of nx with the desired aldehyde or ketone. Only a few complexes with nx hydrazone derivatives have been described but for none were the crystal structures elucidated. The synthesis of a new one‐dimensional Cu^II coordination polymer, namely catena‐poly[[copper(II)‐di‐μ‐chlorido‐copper(II)‐{μ‐1‐ethyl‐N′‐[(1H‐imidazol‐4‐yl)methylidene]‐7‐methyl‐4‐oxo‐1,4‐dihydro‐1,8‐naphthyridine‐3‐carbohydrazidato}‐[dimethanolcopper(II)]‐{μ‐1‐ethyl‐N′‐[(1H‐imidazol‐3‐yl)methylidene]‐7‐methyl‐4‐oxo‐1,4‐dihydro‐1,8‐naphthyridine‐3‐carbohydrazidato}] dichloride methanol tetrasolvate], {[Cu₃(C₁₆H₁₅N₆O₂)₂Cl₂(CH₃OH)₂]Cl₂·4CH₃OH}_n, with the (1H‐imidazol‐4‐yl)methylidene carbohydrazide derivative of nalidixic acid (denoted h4imi), is presented and its structure is compared to the density functional theory (DFT) optimized structure of free h4imi. The title structure presents an octahedral Cu^II ion on an inversion centre alternating along a polymer chain with a square‐pyramidal Cu^II ion, with the two Cu^II centres bridged by two chloride ligands. Hydrogen bonds involving chloride counter‐ions and methanol solvent molecules mediate the three‐dimensional packing of the polymer. Comparison of the geometrical results from the structure analysis with those derived from a DFT study of the free ligand reveal the differences that arise upon coordination.     

Fabrication of a Stable Layer‐by‐Layer Thin Film Based on Diazoresin and Phenolic Hydroxy‐Containing Polymers via H‐Bonding

Using the self assembly technique, a stable multilayer films was successfully fabricated from diazoresin (DR) and poly(styrene‐co‐(N‐(p‐hydroxyphenyl)maleimide)) (P(S‐co‐HPMI)) followed by UV irradiation. The driving force of the self‐assembly was confirmed to be H‐bonding attraction between the diazonium group (—N₂⁺) of DR and the phenolic hydroxy group (—Ph—OH) of P(S‐co‐HPMI). A linkage conversion from H‐bond to covalent bond takes place after decomposition of the —N₂⁺ group using UV irradiation. As a result, the stability of the film towards polar solvents increases dramatically.     

Preparation of P(MBA‐co‐MAA)/Zr(OH)4/P(EGDMA‐co‐MAA)/TiO2 Tetra‐layer Hybrid Microspheres and the Corresponding ZrO2/TiO2 Double‐shelled Hollow Microspheres

Double‐shelled zirconia/titania (ZrO₂/TiO₂) hollow microspheres were prepared by the selective removal of the polymer components via the calcination of the corresponding tetra‐layer poly(N,N′‐methylenebisacryl amide‐co‐methacrylic acid) (P(MBA‐co‐MAA))/Zr(OH)₄/poly(ethyleneglycol dimethacrylate‐co‐methacrylic acid) (P(EGDMA‐co‐MAA))/TiO₂ hybrid microspheres. These tetra‐layer microspheres were synthesized by the combination of the distillation copolymerization of N,N(‐methylenebisacryl amide‐co‐methacrylic acid (MBA) or ethyleneglycol dimethacrylate (EGDMA) crosslinker and methacrylic acid (MAA) for the preparation of polymer core and third‐layer as well as the controlled sol‐gel hydrolysis of inorganic precursors for the construction of zirconium hydroxide (Zr(OH)₄) and titania (TiO₂) layers. The thicknesses of zirconia and titania shell‐layers were conveniently controlled via varying the feed of zirconium n‐butoxide (Zr(OBu)₄) and titanium tetrabutoxide (TBOT) during the sol‐gel hydrolysis, while the sizes of polymer layers were tuned through a multi‐stage distillation precipitation copolymerization. The structure and morphology of the resultant microspheres were characterized by transmission electron microscopy (TEM), X‐ray diffractometer (XRD), X‐ray photoelectronic spectroscopy (XPS), and thermogrametric analysis (TGA).     

Ionothermal synthesis and crystal structure of a new organic–inorganic hybrid compound: catena‐poly[bis(1‐ethyl‐3‐methylimidazolium) [hepta‐μ‐bromido‐pentacuprate(I)]]

A new organic–inorganic hybrid compound, catena‐poly[bis(1‐ethyl‐3‐methylimidazolium) [μ₅‐bromido‐tri‐μ₃‐bromido‐tri‐μ₂‐bromido‐pentacuprate(I)]], {(C₆H₁₁N₂)₂[Cu₅Br₇]}_n, has been obtained under ionothermal conditions from a reaction mixture containing Ba(OH)₂·8H₂O, Cu(OH)₂·2H₂O, As₂O₅, 1‐ethyl‐3‐methylimidazolium bromide and distilled water. The crystal structure consists of complex [Cu₅Br₇]²⁻ anions arranged in sinusoidal {[Cu₅Br₇]²⁻}_n chains running along the a axis, which are surrounded by 1‐ethyl‐3‐methylimidazolium cations. Three of the five unique Br atoms and one of the three Cu^I atoms occupy special positions with half‐occupancy (a mirror plane perpendicular to the b axis, site symmetry m). The Cu^I ions are in a distorted tetrahedral coordination environment, with four Br atoms at distances ranging from 2.3667 (10) to 2.6197 (13) Å, and an outlier at 3.0283 (12) Å, exceptionally elongated and with a small contribution to the bond‐valence sum of only 6.7%. Short C—H...Br contacts build up a three‐dimensional network. The Cu...Cu distances within the chain range from 2.8390 (12) to 3.0805 (17) Å, indicating the existence of weak Cu^I...Cu^I cuprophilic interactions.     

Synthesis and characterization of poly(vinylidene fluoride‐co‐chlorotrifluoroethylene)‐grafted‐poly(acrylonitrile) via single electron transfer–living radical polymerization process

Preparation of functional fluoromaterials through chemical modification of traditional fluoropolymers has been recognized as an economic and convenient strategy to expand the application areas of fluoropolymers. Poly(vinylidene fluoride‐co‐chlorotrifluoroethylene)‐grafted‐polyacrylonitrile (P(VDF‐co‐CTFE)‐g‐PAN) has been successfully synthesized via single electron transfer–living radical polymerization (SET–LRP) process initiated with macroinitiator P(VDF‐co‐CTFE) in the presence of trace amount of Cu(0)/tris(2(dimethylamino)ethyl)amine (Me₆‐TREN) in dimethyl sulfoxide (DMSO) at ambient temperature. The typical side reactions happened on P(VDF‐co‐CTFE) induced by the nitrogen‐containing solvents and high reaction temperature in atom transfer radical polymerization process could be avoided in SET–LRP process by using the mild reaction conditions. Well‐controlled polymerization features were observed under varied reaction conditions including the different reaction temperature, catalyst concentration, as well as monomer amount in feed. An induction period of 0.5–1.0 h in the polymerization procedure was observed at low temperature, which may be attributed to the Cu₂O from the surface of the Cu(0) powder. When Cu(0) catalyst is activated, the introduction period is eliminated. The polymerization rates were decelerated by adding excessive Me₆‐TREN for the formation of more stable CuCl₂/(Me₆‐TREN)₂. The structure of P(VDF‐co‐CTFE)‐g‐PAN was demonstrated by FTIR, NMR, DSC, and TGA. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Dinuclear Complexes of Copper(I) with Crown Ether‐containing N‐Thiophosphorylated Bis‐thioureas and 2,2′‐Bipyridine or 1,10‐Phenanthroline: Synthesis,Characterization, and Picrate Extraction Properties

Reaction of O,O′‐diisopropylthiophosphoric acid isothiocyanate (iPrO)₂P(S)NCS with 1,10‐diaza‐18‐crown‐6, 1,7‐diaza‐18‐crown‐6, or 1,7‐diaza‐15‐crown‐5 leads to the N‐thiophosphorylated bis‐thioureas N,N′‐bis[C(S)NHP(S)(OiPr)₂]‐1,10‐diaza‐18‐crown‐6 ( H₂L^I ), N,N′‐bis[C(S)NHP(S)(OiPr)₂]‐1,7‐diaza‐18‐crown‐6 ( H₂L^II ) and N,N′‐bis[C(S)NHP(S)(OiPr)₂]‐1,7‐diaza‐15‐crown‐5 ( H₂L^III ). Reaction of the potassium salts of H₂L^I–III with a mixture of CuI and 2,2′‐bipyridine ( bpy ) or 1,10‐phenanthroline ( phen ) in aqueous EtOH/CH₂Cl₂ leads to the dinuclear complexes [Cu₂(bpy)₂L^I–III] and [Cu₂(phen)₂L^I–III] . The structures of these compounds were investigated by ¹H, ³¹P{¹H} NMR spectroscopy, and elemental analysis. The crystal structures of H₂L^I and [Cu₂(phen)₂L^I] were determined by single‐crystal X‐ray diffraction. Extraction capacities of the obtained compounds in comparison to the related compounds 1,10‐diaza‐18‐crown‐6, N,N′‐bis[C(=CMe₂)CH₂P(O)(OiPr)₂]‐1,10‐diaza‐18‐crown‐6, N,N′‐bis[C(S)NHP(O)(OiPr)₂]‐1,10‐diaza‐18‐crown‐6 towards the picrate salts LiPic, NaPic, KPic. and NH₄Pic were also studied.     

Novel aliphatic poly(ester‐carbonate) with pendant allyl ester groups and its folic acid functionalization

A series of novel poly(ester‐carbonate)s bearing pendant allyl ester groups P(LA‐co‐MAC)s were prepared by ring‐opening copolymerization of L ‐lactide (LA) and 5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxan‐2‐one (MAC) with diethyl zinc (ZnEt₂) as initiator. NMR analysis investigated the microstructure of the copolymer. DSC results indicated that the copolymers displayed a single glass‐transition temperature (T_g), which was indicative of a random copolymer, and the T_g decreased with increasing carbonate content in the copolymer. Then NHS‐activated folic acid (FA) first reacted with 2‐aminoethanethiol to yield FA‐SH; grafting FA‐SH to P(LA‐co‐MAC) in the presence of TEA produced P(LA‐co‐MAC)/FA. The structure of P(LA‐co‐MAC)/FA and its precursor were confirmed by ¹H NMR and XPS analysis. Cell experiments showed that FA‐grafted P(LA‐co‐MAC) had improved adhesion and proliferation behavior of vero cells on the polymer films. Therefore, the novel FA‐grafted block copolymer is expected to find application in drug delivery or tissue engineering. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1852–1861, 2008     

Construction of (3,8)‐connected three‐dimensional cobalt(II) and copper(II) coordination polymers with 1,3‐bis[(1,2,4‐triazol‐4‐yl)methyl]benzene and benzene‐1,3,5‐tricarboxylate ligands

Coordination polymers (CPs) have been widely studied because of their diverse and adjustable topologies and wide‐ranging applications in luminescence, chemical sensors, magnetism, photocatalysis, gas adsorption and separation. In the present work, two coordination polymers, namely poly[(μ₅‐benzene‐1,3,5‐tricarboxylato‐κ⁶O¹:O^1′:O³:O³:O⁵,O^5′){μ₃‐1,3‐bis[(1,2,4‐triazol‐4‐yl)methyl]benzene‐κ³N:N′:N′′}di‐μ₃‐hydroxido‐dicobalt(II)], [Co₂(C₉H₃O₆)(OH)(C₁₂H₁₂N₆)]_n or [Co₂(btc)(OH)(mtrb)]_n, (1), and poly[[diaquabis(μ₃‐benzene‐1,3,5‐tricarboxylato‐κ³O¹:O³:O⁵)bis{μ₃‐1,3‐bis[(1,2,4‐triazol‐4‐yl)methyl]benzene‐κ³N:N′:N′′}tetra‐μ₃‐hydroxido‐tetracopper(II)] monohydrate], {[Cu₄(C₉H₃O₆)₂(OH)₂(C₁₂H₁₂N₆)₂(H₂O)₂]·H₂O}_n or {[Cu₄(btc)₂(OH)₂(mtrb)₂(H₂O)₂]·H₂O}_n, (2), were synthesized by the hydrothermal method using 1,3‐bis[(1,2,4‐triazol‐4‐yl)methyl]benzene (mtrb) and benzene‐1,3,5‐tricarboxylate (btc^3?). CP (1) exhibits a (3,8)‐coordinated three‐dimensional (3D) network of the 3,8T38 topological type, with a point symbol of {4,5,6}₂{4²·5⁶·6¹⁶·7²·8²}, based on the tetranuclear hydroxide cobalt(II) cluster [Co₄(μ₃‐OH)₂]. CP (2) shows a (3,8)‐coordinated tfz‐d topology, with a point symbol of {4₃}₂{4⁶·6¹⁸·8⁴}, based on the tetranuclear hydroxide copper(II) cluster [Cu₄(μ₃‐OH)₂]. The different (3,8)‐coordinated 3D networks based on tetranuclear hydroxide–metal clusters of (1) and (2) are controlled by the different central metal ions [Co^II for (1) and Cu^II for (2)]. The thermal stabilities and solid‐state optical diffuse‐reflection spectra were measured. The energy band gaps (E_g) obtained for (1) and (2) were 2.72 and 2.29 eV, respectively. CPs (1) and (2) exhibit good photocatalytic degradation of the organic dyes methylene blue (MB) and rhodamine B (RhB) under visible‐light irradiation.     

Study of Phase Separation of Poly(N-isopropylacrylamide-co-styrene) Aqueous Solutions with Rayleigh Scattering Technique

A thermally sensitive copolymer, poly(N‐isopropylacrylamide‐co‐styrene) [P(NIPAM‐co‐St)] (M_n?9.5×10⁵ g/mol and M_w/M_n?1.51) was synthesized by soap‐free emulsion polymerization. The phase separation of the copolymer in water was investigated by Rayleigh scattering (RS) technique. The RS spectra revealed the transition of molecular conformation and the aggregation of molecular chains in the course of phase separation. The coil‐to‐globule and globule‐to‐coil transitions of P(NIPAM‐co‐St) chains were found in one heating‐and‐cooling cycle. By means of Avrami formula, apparent activation energy of phase separation of P(NIPAM‐co‐St) aqueous solutions was estimated. Moreover, a model was proposed to describe the phase separation process.     

Magnetic solid-phase extraction using magnetic hypercrosslinked polymer for rapid determination of illegal drugs in urine

A novel magnetic material Fe₃O₄/SiO₂/P(MAA‐co‐VBC‐co‐DVB) was prepared via the hypercrosslinking of its precursor which was produced via precipitation polymerization of methacrylic acid (MAA), vinylbenzyl chloride (VBC), and divinylbenzene (DVB) in the presence of Fe₃O₄/SiO₂ submicrospheres with the surface containing abundant reactive double bonds. The resultant sorbent was characterized by scan electron microscopy, N₂ adsorption, and Fourier transform infrared spectroscopy. It was found that this material had remarkable features such as large surface area (500 m²/g) and pore volume (0.32 cm³/g), as well as desirable chemical composition (including hydrophobic and ion‐exchange moieties). Taking advantages of the Fe₃O₄/SiO₂/P(MAA‐co‐VBC‐co‐DVB), a magnetic SPE (MSPE) coupled with capillary electrophoresis (CE) method was developed for the determination of illegal drugs in urine samples. The extraction time could be clearly shortened up to 3 min. The recoveries of these drug compounds were in the range of 84.0–123% with relative standard deviations ranging between 1.7 and 10.5%; the limit of detection was in the range of 4.0–6.0 μg/L. The proposed method is simple, effective, and low‐cost, and provides an accurate and sensitive detection platform for abused drug analysis.     

Synthesis and micellization of thermoresponsive galactose‐based diblock copolymers

Thermoresponsive double hydrophilic diblock copolymers poly(2‐(2′‐methoxyethoxy)ethyl methacrylate‐co‐oligo(ethylene glycol) methacrylate)‐b‐poly(6‐O‐methacryloyl‐D ‐galactopyranose) (P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP) with various compositions and molecular weights were obtained by deprotection of amphiphilic diblock copolymers P(MEO₂MA‐co‐OEGMA)‐b‐poly(6‐O‐methacryloyl‐1,2:3,4‐di‐O‐isopropylidene‐D ‐galactopyranose) (P(MEO₂MA‐co‐OEGMA)‐b‐PMAlpGP), which were prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization using P(MEO₂MA‐co‐OEGMA) as macro‐RAFT agent. Dynamic light scattering and UV–vis studies showed that the micelles self‐assembled from P(MEO₂MA‐co‐OEGMA)‐b‐PMAlpGP were thermoresponsive. A hydrophobic dye Nile Red could be encapsulated by block copolymers P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP upon micellization and released upon dissociation of the formed micelles under different temperatures. The galactose functional groups in the PMAGP block have specific interaction with HepG2 cells, and P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP has potential applications in hepatoma‐targeting drug delivery and biodetection. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011