Efficient zinc initiators supported by NNO‐tridentate ketiminate ligands for cyclic esters polymerization

A series of zinc benzylalkoxide complexes, [LⁿZn(μ‐OBn)]₂ (L = L ¹ H – L ⁵ H ), supported by NNO‐tridentate ketiminate ligands with various electron withdrawing‐donating subsituents have been synthesized and characterized. X‐ray crystal structural studies revealed that complexes 2b and 4b are dinuclear bridging through the benzylalkoxy oxygen atoms with penta‐coordinated metal centers. All the metal complexes have acted as efficient initiators for the ring‐opening polymerization of L ‐lactide (within 12 min, 0 °C). Remarkably, a molecular weight of PLLA up to 580,000 can be achieved using [(L⁵Zn(μ‐OBn)]₂ ( 5b ) as an initiator. The kinetic studies for the polymerization of L ‐lactide with complex 3b at ?10 °C corresponded to first‐order reactions in the monomer. The ring‐opening polymerization (ROP) of ε‐caprolactone, ε‐decalactone, β‐butyrolactone and their copolymer with complex 3b was investigated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Ring‐opening polymerization of lactides initiated by magnesium and zinc complexes based on NNO‐tridentate ketiminate ligands: Activity and stereoselectivity studies

Four metal benzylalkoxides, [L₂M₂(μ‐OBn)₂] (M = Mg or Zn), based on NNO‐tridentate ketiminate ligands are synthesized and characterized. X‐ray crystal structural studies of [(L¹)₂Mg₂(μ‐OBn)₂] ( 1a ) and [(L¹)₂Zn₂(μ‐OBn)₂] ( 1b ) (L¹‐H = (Z)‐4‐((2‐(dimethylamino)ethylamino)(phenyl)methylene)‐3‐methyl‐1‐phenyl‐pyrazol‐5‐one) reveal that both complexes 1a and 1b are dinuclear species whereas the geometry around the metal center is penta‐coordinated bridging through the benzylalkoxy oxygen atoms in the solid structure. The activities and stereoselectivities of these four complexes toward the ring‐opening polymerization of L ‐lactide and rac‐lactide are investigated. Polymerization of L ‐lactide initiated by these four metal benzyloxides proceeds rapidly with good molecular weight control and yields polymer with a very narrow molecular weight distribution. The kinetic studies for the polymerization of L ‐lactide with compound 1a show first order in both compound 1a and lactide concentrations with the polymerization rate constant, k, of 6.94 M/min. Besides, experimental results demonstrate that among these metal benzylalkoxides, complex 1a exhibits the highest stereoselectivity with a Pr up to 87% and complex 1b possesses the highest activity indicating that the terminal group of NNO‐tridentate ketimine ligands exerts a significant influence on both the reactivity and stereoselectivity of these complexes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2318–2329, 2009     

Ring‐opening polymerization of lactides catalyzed by magnesium complexes coordinated with NNO‐tridentate pyrazolonate ligands

A series of magnesium benzylalkoxide complexes, [LⁿMg(μ‐OBn)]₂ ( 1 – 14 ) supported by NNO‐tridentate pyrazolonate ligands with various electron withdrawing‐donating subsituents have been synthesized and characterized. X‐ray crystal structural studies revealed that Complexes 1 – 3 , 5 , 7 , 9 , and 10 are dinuclear bridging through benzylalkoxy oxygen atoms with penta‐coordinated metal centers. All of these complexes acted as efficient initiators for the ring‐opening polymerization of L‐lactide and rac‐lactide. Based on kinetic studies, the activity of these metal complexes is significantly influenced by the electronic effect of the ancillary ligands with the electron‐donating substituents at the phenyl rings enhancing the polymerization rate. In addition, the “living” and “immortal” character of 6 has paved a way to synthesize as much as 40‐fold polymer chains of polylactides with a very narrow polydispersity index in the presence of a small amount of initiator. Among all of magnesium complexes, Complex 6 exhibits the highest stereoselectivity toward ring‐opening polymerization of rac‐lactide with Pr up to 88% in THF at 0 °C. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Dual zinc catalysts for L‐lactide polymerization and reaction of CO2 with cyclohexene oxide

A series of zinc complexes, [ L ^X ZnEt] ( 1–5 ) and [ L ^X Zn ₂ (OAc) ₃ ] (6–9) , associated with NNO‐tridentate Schiff base ligands (2‐(((2‐((cyclohexyl[methyl]amino)methyl)phenyl)imino)methyl)phenolate (CAP) derivatives), were synthesized, and their activity toward ring‐opening polymerization (ROP) of L‐lactide (LA) and the reaction of CO₂ with cyclohexene oxide were also investigated. All of [ L ^X ZnEt] revealed excellent catalytic activity to ring‐opening polymerization (ROP) of LA in the presence of benzyl alcohol. Among them, [ L ^H ZnEt] (1) showed the highest activity with 82% conversation within 45 s. In contrast, [L ^X Zn ₂ (OAc) ₃ ] (6–9) were inactive in ROP of L‐lactide. In addition, all of these Zn complexes demonstrated moderate activity in the reaction of CO₂ with cyclohexene oxide in the presence of Bu₄NCl.     

Synthesis and characterization of multiblock copolymers composed of poly(5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one) outer blocks and poly(L‐lactide) inner blocks

Ethylene glycol (EG) initiated, hydroxyl‐telechelic poly(L ‐lactide) (PLLA) was employed as a macroinitiator in the presence of a stannous octoate catalyst in the ring‐opening polymerization of 5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one (MBC) with the goal of creating A–B–A‐type block copolymers having polycarbonate outer blocks and a polyester center block. Because of transesterification reactions involving the PLLA block, multiblock copolymers of the A–(B–A)_n–B–A type were actually obtained, where A is poly(5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one), B is PLLA, and n is greater than 0. ¹H and ¹³C NMR spectroscopy of the product copolymers yielded evidence of the multiblock structure and provided the lactide sequence length. For a PLLA macroinitiator with a number‐average molecular weight of 2500 g/mol, the product block copolymer had an n value of 0.8 and an average lactide sequence length (consecutive C₆H₈O₄ units uninterrupted by either an EG or MBC unit) of 6.1. For a PLLA macroinitiator with a number‐average molecular weight of 14,400 g/mol, n was 18, and the average lactide sequence length was 5.0. Additional evidence of the block copolymer architecture was revealed through the retention of PLLA crystallinity as measured by differential scanning calorimetry and wide‐angle X‐ray diffraction. Multiblock copolymers with PLLA crystallinity could be achieved only with isolated PLLA macroinitiators; sequential addition of MBC to high‐conversion L ‐lactide polymerizations resulted in excessive randomization, presumably because of residual L ‐lactide monomer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6817–6835, 2006     

Dipotassium di‐μ‐iso­thio­cyanato‐κ4N:S‐bis­[(N‐salicyl­idene‐dl‐valinato‐κ3O,N,O′)­cuprate(II)]

The title compound, K₂[Cu₂(NCS)₂(C₁₂H₁₃NO₃)₂], consists of two K⁺ cations and (N‐salicyl­idene‐d ‐valinato)­cop­per(II) and (N‐salicyl­idene‐l ‐valinato)cop­per(II) coordination units con­nected through three‐atom thio­cyanate (μ‐NCS) bridges into a centrosymmetric dianion. The Cu^II atom adopts a square‐pyramidal coordination, with three donor atoms of the tridentate Schiff base and one N atom of the bridging ligand (μ‐NCS) in the basal plane. The axial position is occupied by the thio­cyanate S atom of a symmetry‐related ligand at an apical distance of 2.9332 (10) Å. Coulombic interactions between six‐coordinated K⁺ ions and the heteroatoms of neighbouring dimeric anions leads to the formation of one‐dimensional chains of mol­ecules parallel to [010]. The superposition of the normals of the pyramidal base planes in a direction close to [001] indicates possible π–π interactions between neighbouring units.     

Preparation and characterization of poly(2‐methacryloyloxyethyl phosphorylcholine)‐block‐poly(D,L‐lactide) polymer nanoparticles

A poly(D,L ‐lactide)–bromine macroinitiator was synthesized for use in the preparation of a novel biocompatible polymer. This amphiphilic diblock copolymer consisted of biodegradable poly(D,L ‐lactide) and 2‐methacryloyloxyethyl phosphorylcholine and was formed by atom transfer radical polymerization. Polymeric nanoparticles were prepared by a dialysis process in a select solvent. The shape and structure of the polymeric nanoparticles were determined by ¹H NMR, atomic force microscopy, and ζ‐potential measurements. The results of cytotoxicity tests showed the good cytocompatibility of the lipid‐like diblock copolymer poly(2‐methacryloyloxyethyl phosphorylcholine)‐block‐poly(D,L ‐lactide). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 688–698, 2007     

A novel 8‐carboxyindeno[1,2‐b]quinoxalin‐11‐one thio­semi­carbazone zinc(II) Schiff base complex

In the novel title binuclear zinc(II) Schiff base complex, bis­(μ‐11‐thio­semicarbazonoindeno[1,2‐b]quinoxaline‐8‐carboxylato)bis­[(dimethyl sulfoxide)zinc(II)] dimethyl sulfoxide tri­solvate, [Zn₂(C₁₇H₉N₅O₂S)₂(C₂H₆OS)₂]·3C₂H₆OS, each Zn^II atom is five‐coordinated and situated in a distorted square‐pyramidal environment, coordinated by two L²⁻ ligands and one dimethyl sulfoxide mol­ecule. Each L²⁻ ligand, which coordinates to two Zn^II atoms, has two parts. One part, acting in a tridentate chelating mode, coordinates to one Zn^II atom through two N atoms and one S atom, while another part coordinates to another Zn^II atom through a monodentate carboxylate group. The whole complex has a dimeric structure. The coordination mode of the nearly planar L²⁻ ligand is quite different from the most common mode for Schiff bases.     

Reductive Dimerization of Triruthenium Clusters Containing Cationic Aromatic N‐Heterocyclic Ligands

The cationic cluster complexes [Ru₃(μ‐H)(μ‐κ²N,C‐L¹ Me)(CO)₁₀]⁺ ( 1 ⁺; HL¹ Me=N‐methylpyrazinium), [Ru₃(μ‐H)(μ‐κ²N,C‐L² Me)(CO)₁₀]⁺ ( 2 ⁺; HL² Me=N‐methylquinoxalinium), and [Ru₃(μ‐H)(μ‐κ²‐N,C‐L³ Me)(CO)₁₀]⁺ ( 3 ⁺; HL³ Me=N‐methyl‐1,5‐naphthyridinium), which contain cationic N‐heterocyclic ligands, undergo one‐electron reduction processes to become short lived, ligand‐centered, trinuclear, radical species ( 1 – 3 ) that end in the formation of an intermolecular C? C bond between the ligands of two such radicals, thus leading to neutral hexanuclear derivatives. These dimerization processes are selective, in the sense that they only occur through the exo face of the bridging ligands of trinuclear enantiomers of the same configuration, as they only afford hexanuclear dimers with rac structures (C₂ symmetry). The following are the dimeric products that have been isolated by using cobaltocene as reducing agent: [Ru₆(μ‐H)₂{μ₆‐κ⁴N₂,C₂‐(L¹ Me)₂}(CO)₁₈] ( 5 ; from 1 ⁺), [Ru₆(μ‐H)₂{μ₆‐κ⁴N₂,C₂‐(L² Me)₂}(CO)₁₈] ( 6 ; from 2 ⁺), and [Ru₆(μ‐H)₂{μ₄‐κ⁸N₂,C₆‐(L³ Me)₂}(CO)₁₈] ( 7 ; from 3 ⁺). The structures of the final hexanuclear products depend on the N‐heterocyclic ligand attached to the starting materials. Thus, although both trinuclear subunits of 5 and 6 are face‐capped by their bridging ligands, the coordination mode of the ligand of 5 is different from that of the ligand of 6 . The trinuclear subunits of 7 are edge‐bridged by its bridging ligand. In the presence of moisture, the reduction of 3 ⁺ with cobaltocene also affords a trinuclear derivative, [Ru₃(μ‐H)(μ‐κ²N,C‐L^3′ Me)(CO)₁₀] ( 8 ), whose bridging ligand (L^3′ Me) results from the formal substitution of an oxygen atom for the hydrogen atom (as a proton) that in 3 ⁺ is attached to the C⁶ carbon atom of its heterocyclic ligand. The results have been rationalized with the help of electrochemical measurements and DFT calculations, which have also shed light on the nature of the odd‐electron species, 1 – 3 , and on the regioselectivity of their dimerization processes. It seems that the sort of coupling reactions described herein requires cationic complexes with ligand‐based LUMOs.     

Synthesis of four‐arm star poly(L‐lactide) oligomers using an in situ‐generated calcium‐based initiator

Using an in situ‐generated calcium‐based initiating species derived from pentaerythritol, the bulk synthesis of well‐defined four‐arm star poly(L ‐lactide) oligomers has been studied in detail. The substitution of the traditional initiator, stannous octoate with calcium hydride allowed the synthesis of oligomers that had both low PDIs and a comparable number of polymeric arms (3.7–3.9) to oligomers of similar molecular weight. Investigations into the degree of control observed during the course of the polymerization found that the insolubility of pentaerythritol in molten L ‐lactide resulted in an uncontrolled polymerization only when the feed mole ratio of L ‐lactide to pentaerythritol was 13. At feed ratios of 40 and greater, a pseudoliving polymerization was observed. As part of this study, in situ FT‐Raman spectroscopy was demonstrated to be a suitable method to monitor the kinetics of the ring‐opening polymerization of lactide. The advantages of using this technique rather than FTIR‐ATR and ¹H NMR for monitoring L ‐lactide consumption during polymerization are discussed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4736–4748, 2009     

Tridentate anilido‐aldimine magnesium and zinc complexes as efficient catalysts for ring‐opening polymerization of ε‐caprolactone and L‐lactide

A novel tridentate anilido‐aldimine ligand, [o‐C₆H₄(NHAr)? HC?NCH₂CH₂NMe₂] (Ar = 2,6‐ⁱPr₂C₆H₃, L ‐H, 1 ), has been prepared by the condensation of N, N‐dimethylethylenediamine with one molar equivalent of 2‐fluoro‐benzaldehyde in hexane, followed by the addition of the lithium salt of diisopropylaniline in THF. Magnesium (Mg) and zinc (Zn) complexes supported by the tridentate anilido‐aldimine ligand have been synthesized and structurally characterized. Reaction of L ‐H ( 1 ) with an equivalent amount of MgⁿBu₂ or ZnEt₂ produces the monomeric complex [ L MgⁿBu] ( 2 ) or [ L ZnEt] ( 3 ), respectively. Experimental results show that complexes 2 and 3 are efficient catalysts for ring‐opening polymerization of ε‐caprolactone (CL) and L ‐lactide (LA) in the presence of benzyl alcohol and catalyze the polymerization of ε‐CL and L ‐LA in a controlled fashion yielding polymers with a narrow polydispersity index. In both polymerizations, the activity of Mg complex 2 is higher than that of Zn complex 3 , which is probably due to the higher Lewis acidity and better oxophilic nature of Mg²⁺ metal. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4927–4936, 2009     

Simple route for synthesis of H‐shaped copolymers

The H‐shaped copolymers, [poly(L ‐lactide)]₂polystyrene [poly(L ‐lactide)]₂, [(PLLA)₂PSt(PLLA)₂] have been synthesized by combination of atom transfer radical polymerization (ATRP) with cationic ring‐opening polymerization (CROP). The first step of the synthesis is ATRP of St using α,α′‐dibromo‐p‐xylene/CuBr/2,2′‐bipyridine as initiating system, and then the PSt with two bromine groups at both chain ends (Br–PSt–Br) were transformed to four terminal hydroxyl groups via the reaction of Br–PSt–Br with diethanolamine in N,N‐dimethylformamide. The H‐shaped copolymers were produced by CROP of LLA, using PSt with four terminal hydroxyl groups as macroinitiator and Sn(Oct)₂ as catalyst. The copolymers obtained were characterized by ¹H NMR spectroscopy and gel permeation chromatography. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2794–2801, 2006     

Living polymerization of D,L‐3‐methylglycolide initiated with bimetallic (Al/Zn) μ‐oxo alkoxide and copolymers thereof

D,L ‐3‐Methylglycolide (MG) was successfully polymerized with bimetallic (Al/Zn) μ‐oxo alkoxide as an initiator in toluene at 90 °C. The effect of the initiator concentration and monomer conversion on the molecular weight was studied. It is shown that the polymerization of MG follows a living process. A kinetic study indicated that the polymerization approximates the first order in the monomer, and no induction period was observed. ¹H NMR spectroscopy showed that the ring‐opening polymerization proceeds through a coordination–insertion mechanism with selective cleavage of the acyl–oxygen bond of the monomer. On the basis of ¹H NMR and ¹³C NMR analyses, the selective cleavage of the acyl–oxygen bond of the monomer mainly occurs at the least hindered carbonyl groups (P₁ = 0.84, P₂ = 0.16). Therefore, the main chain of poly(D,L ‐lactic acid‐co‐glycolic acid) (50/50 molar ratio) obtained from the homopolymerization of MG was primarily composed of alternating lactyl and glycolyl units. The diblock copolymers poly(ϵ‐caprolactone)‐b‐poly(D,L ‐lactic acid‐alt‐glycolic acid) and poly(L ‐lactide)‐b‐poly(D,L ‐lactic acid‐alt‐glycolic acid) were successfully synthesized by the sequential living polymerization of related lactones (ϵ‐caprolactone or L ‐lactide). ¹³C NMR spectra of diblock copolymers clearly show their pure diblock structures. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 357–367, 2001     

[Hg2(μ‐bpe)(μ‐OAc)2(μ‐SCN)2]n,a New Two‐Dimensional Coordination Polymer Involving Three Simultaneously Bridging Ligands: 1,2‐Bis(4‐pyridyle)ethene,Acetate, and Thiocyanate

A new mercury(II) complex of 1,2‐bis(4‐pyridyle)ethene (bpe) with anionic acetate and thiocyanate ligands has been synthesized and characterized by elemental analysis, IR, ¹H NMR and ¹³C NMR spectroscopy. The single crystal X‐ray analysis shows that the complex is a two‐dimensional polymer with simultaneously bridging 1,2‐bis(4‐pyridyle)ethane, acetate and thiocyanate ligands and basic repeating dimeric [Hg₂(μ‐bpe)(μ‐OAc)₂(μ‐SCN)₂] units. The two‐dimensional system forms a three‐dimensional network by packing via π‐π stacking interactions.     

A “Mitsubishi emblem” tetrauclear aluminum complex containing two unsymmetric N2O2‐ligands and a symmetric NO3‐ligand as initiator for polymerization of rac‐lactide

A novel hydroxy‐, methoxy‐, and phenoxy‐bridge “Mitsubishi emblem” tetranuclear aluminum complex ( 1 ) is synthesized from an unsymmetric amine‐pyridine‐bis(phenol) N₂O₂‐ligand (H₂L¹) and a symmetric amine‐tris(phenol) NO₃‐ligand (H₂L²). Two same configuration chiral nitrogen atoms are formed in the tetranuclear Al complex upon coordination of the unsymmetric tertiary amine ligand to central Al. Complex 1 initiates controlled ring‐opening polymerization (ROP) of rac‐lactide and afford polylactide (PLA) with narrow molecular weight distributions (M_w/M_n = 1.05–1.19). The analysis of ¹H NMR spectra of the oligomer indicates that the methoxy group is the initiating group and the ring‐opening polymerization of lactide follows a coordination‐insertion mechanism. The Homonuclear decoupled ¹H NMR spectroscopy suggests the isotactic‐rich chains is preferentially formed in PLA. The study on kinetics of the ROP of lactide reveals the homopropagation rate is higher than the cross‐propagation rate, which is in agreement with the observed isotactic selectivity in the ROP of rac‐lactide. The stereochemistry of the polymerization was also supported by activation parameters. The introduction of unsymmetric ligand H₂L¹ has an effect on stereoslectivity of polymerization. This result may be of interest for the design of multinuclear metal complex catalysts containing functionalized ligands. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2084–2091     

Ring‐opening polymerization of L‐lactide by rare‐earth tris(4‐tert‐butylphenolate) single‐component initiators

The ring‐opening polymerization of L ‐lactide initiated by single‐component rare‐earth tris(4‐tert‐butylphenolate)s was conducted. The influences of the rare‐earth elements, solvents, temperature, monomer and initiator concentrations, and reaction time on the polymerization were investigated in detail. No racemization was found from 70 to 100 °C under the examined conditions. NMR and differential scanning calorimetry measurements further confirmed that the polymerization occurred without epimerization of the monomer or polymer. A kinetic study indicated that the polymerization rate was first‐order with respect to the monomer and initiator concentrations. The overall activation energy of the ring‐opening polymerization was 79.2 kJ mol^?1. ¹H NMR data showed that the L ‐lactide monomer inserted into the growing chains with acyl–oxygen bond cleavage. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6209–6215, 2004     

Controlling Metal–Ligand–Metal Oxidation State Combinations by Ancillary Ligand (L) Variation in the Redox Systems [L2Ru(μ‐boptz)RuL2]n,boptz=3,6‐bis(2‐oxidophenyl)‐1,2,4,5‐tetrazine,and L=acetylacetonate, 2,2′‐bipyridine,or 2‐phenylazopyridine

The new compounds [(acac)₂Ru(μ‐boptz)Ru(acac)₂] ( 1 ), [(bpy)₂Ru(μ‐boptz)Ru(bpy)₂](ClO₄)₂ ( 2 ‐(ClO₄)₂), and [(pap)₂Ru(μ‐boptz)Ru(pap)₂](ClO₄)₂ ( 3 ‐(ClO₄)₂) were obtained from 3,6‐bis(2‐hydroxyphenyl)‐1,2,4,5‐tetrazine (H₂boptz), the crystal structure analysis of which is reported. Compound 1 contains two antiferromagnetically coupled (J=?36.7 cm^?1) Ru^III centers. We have investigated the role of both the donor and acceptor functions containing the boptz^2? bridging ligand in combination with the electronically different ancillary ligands (donating acac^?, moderately π‐accepting bpy, and strongly π‐accepting pap; acac=acetylacetonate, bpy=2,2′‐bipyridine pap=2‐phenylazopyridine) by using cyclic voltammetry, spectroelectrochemistry and electron paramagnetic resonance (EPR) spectroscopy for several in situ accessible redox states. We found that metal–ligand–metal oxidation state combinations remain invariant to ancillary ligand change in some instances; however, three isoelectronic paramagnetic cores Ru(μ‐boptz)Ru showed remarkable differences. The excellent tolerance of the bpy co ‐ ligand for both Ru^III and Ru^II is demonstrated by the adoption of the mixed ‐ valent form in [L₂Ru(μ‐boptz)RuL₂]³⁺, L=bpy, whereas the corresponding system with pap stabilizes the Ru^II states to yield a phenoxyl radical ligand and the compound with L=acac^? contains two Ru^III centers connected by a tetrazine radical‐anion bridge.     

Di‐nuclear zinc complexes containing tridentate imino‐benzotriazole phenolate derivatives as efficient catalysts for ring‐opening polymerization of cyclic esters and copolymerization of phthalic anhydride with cyclohexene oxide

Zinc catalysts incorporated by imino‐benzotriazole phenolate ( IBTP ) ligands were synthesized and characterized by single‐crystal X‐ray structure determinations. The reaction of the ligand precursor ( ^C1DMeIBTP ‐H or ^C1DIPIBTP ‐H) with diethyl zinc (ZnEt₂) in a stoichiometric proportion in toluene furnished the di‐nuclear ethyl zinc complexes [(μ‐ ^C1DMeIBTP )ZnEt]₂ ( 1 ) and [(μ‐ ^C1DIPIBTP )ZnEt]₂ ( 2 ). The tetra‐coordinated monomeric zinc complex [( ^C1PhIBTP )₂Zn] ( 3 ) or [( ^C1BnIBTP )₂Zn] ( 4 ) resulted from treatment of ^C1PhIBTP ‐H or ^C1BnIBTP ‐H as the pro‐ligand under the similar synthetic method with ligand to metal precursor ratio of 2:1. Single‐crystal X‐ray diffraction of bimetallic complexes 1 and 2 indicates that the ^C1DMeIBTP or ^C1DIPIBTP fragment behaves a NON‐tridentate ligand to coordinate two metal atoms. Catalysis for ring‐opening polymerization (ROP) of ε‐caprolactone (ε‐CL), β‐butyrolactone (β‐BL), and lactide (LA) of complexes 1 and 2 was systematic studied. In combination with 9‐anthracenemethanol (9‐AnOH), Zn complex 1 was found to polymerize ε‐CL, β‐BL, and L‐LA with efficient catalytic activities in a controlled character. This study also compared the reactivity of these ROP monomers with different ring strains by Zn catalyst 1 in the presence of 9‐AnOH. Additionally, Zn complex 1 combining with benzoic acid was demonstrated to be an active catalytic system to copolymerize phthalic anhydride and cyclohexene oxide. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 714–725     

A synchrotron radiation study of the one‐dimensional complex of sodium with (1S)‐N‐carboxylato‐1‐(9‐deazaadenin‐9‐yl)‐1,4‐dideoxy‐1,4‐imino‐d‐ribitol,a member of the 'immucillin' family

The sodium salt of [immucillin‐A–CO₂H]⁻ (Imm‐A), namely catena‐poly[[[triaquadisodium(I)](μ‐aqua)[μ‐(1S)‐N‐carboxylato‐1‐(9‐deazaadenin‐9‐yl)‐1,4‐dideoxy‐1,4‐imino‐d ‐ribitol][triaquadisodium(I)][μ‐(1S)‐N‐carboxylato‐1‐(9‐deazaadenin‐9‐yl)‐1,4‐dideoxy‐1,4‐imino‐d ‐ribitol]] tetrahydrate], {[Na₂(C₁₂H₁₃N₄O₆)₂(H₂O)₇]·4H₂O}_n, (I), forms a polymeric chain via Na⁺—O interactions involving the carboxylate and keto O atoms of two independent Imm‐A molecules. Extensive N,O—H...O hydrogen bonding utilizing all water H atoms, including four waters of crystallization, provides crystal packing. The structural definition of this novel compound was made possible through the use of synchrotron radiation utilizing a minute fragment (volume ∼2.4 × 10⁻⁵ mm⁻³) on a beamline optimized for protein data collection. A summary of intra‐ring conformations for immucillin structures indicates considerable flexibility while retaining similar intra‐ring orientations.     

Ring‐opening polymerization of cyclic esters promoted by phosphido‐diphosphine pincer group 3 complexes

Phosphido‐diphosphine Group 3 metal complexes 1–4 [(o‐C₆H₄PR₂)₂P‐M(CH₂SiMe₃)₂; R = Ph, 1 : M = Y, 2 : M = Sc; R = iPr, 3 : M = Y, 4 : M = Sc] are very efficient catalysts for the ring‐opening polymerization (ROP) of cyclic esters such as ε‐caprolactone (ε‐CL), L ‐lactide, and δ‐valerolactone under mild polymerization conditions. In the ROP of ε‐CL, complexes 1–4 promote quantitative conversion of high amount of monomer (up to 3000 equiv) with very high turnover frequencies (TOF) (～4 × 10⁴ mol_CL/mol_I h) showing a catalytic activity among the highest reported in the literature. The immortal and living ROP of ε‐CL and L ‐lactide is feasible by combining complexes 1–4 with 5 equiv of 2‐propanol. Polymers with controlled molecular parameters (M_n, end groups) and low polydispersities (M_w/M_n = 1.05–1.09) are formed as a result of fast alkoxide/alcohol exchange. In the ROP of δ‐valerolactone, complexes 1–4 showed the same activity observed for lactide (L ‐ and D ,L ‐lactide) producing high molecular weight polymers with narrow distribution of molar masses. Complexes 1–4 also promote the ROP of rac‐β butyrolactone affording atactic low molecular weight poly(hydroxybutyrate) bearing unsaturated end groups probably generated by elimination reactions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011