Facilitated transport of molecular oxygen in cobaltporphyrin/poly(1-trimethylsilyl-1-propyne) membrane

The combination membrane of poly(1-trimethylsilyl-1-propyne) with enormously high permeability and poly(vinylimidazole)-bound porphinatocobalt with selective oxygenbinding ability was prepared. Oxygen transport through the membrane was facilitated in terms of oxygen transport via the latter domain as a fixed oxygen-carrier, and this oxygen permeability maintained for a month.     

Meso-5，10，15，20-四-（对-甲氧基苯基）卟啉稀土氯化物的合成与表征

meso-Tetrakis-（p-methoxyphenyl）porphyrin rare earth chlorides, Ln（TMOPP）Cl （Ln： Dy, Ho, Tm, Yb, Lu and H2TMOPP： tetrakis-（p-methoxyphenyl）porphyrin）, were synthesized and characterized. Their composition, structure and properties were studied by elemental analyses, ultra-violet visible spectra, infrared spectra, luminescence spectra, molar conductances and thermal analysis. The four nitrogen atoms of the porphyrin are bonded to a central rare earth ion with four coordination numbers. The lanthanide ion lies above the porphyrin molecular plane and chloride ion is outside boundary of the coordination compound. Complexes are stable below 200℃ and do not contain small molecules （water or solvent）. Ultra-violet visible and infrared spectra were recorded and some of spectral bands were assigned. Surface photovoltaic spectroscopy （SPS） and electric-field induced surface photovoltaic spectroscopy （EFISPS） were measured. The spectral bands were assigned. The photovoltaic response is similar to the UV-visible absorption spectrum, therefore corresponding to analogous electron transition process.     

Comb Poly(Oligo(2‐Ethyl‐2‐Oxazoline)Methacrylate)‐Peptide Conjugates Prepared by Aqueous Cu(0)‐Mediated Polymerization and Reductive Amination

The controlled synthesis of poly(oligo(2‐ethyl‐2‐oxazoline)methacrylate) (P(OEtOxMA)) polymers by Cu(0)‐mediated polymerization in water/methanol mixtures is reported. Utilizing an acetal protected aldehyde initiator for the polymerization, well‐defined polymers are synthesized (>99% conversion, Ð < 1.25) with subsequent postpolymerization deprotection resulting in α‐aldehyde end group containing comb polymers. These P(OEtOxMA) are subsequently site‐specifically conjugated, via reductive amination, to a dipeptide (NH₂‐Gly‐Tyr‐COOH) as a model peptide, prior to conjugation to the functional peptide oxytocin. The resulting oxytocin conjugates are evaluated in comparison to poly(oligo(ethylene glycol) methyl ether methacrylate) combs synthesized in the same manner for potential effects on thermal stability in comparison to the native peptide.

     

Kinetics of Ag+ contained polymeric complex membranes for facilitated olefin transport

The reactions of silver ion complexes with polyethylene-graft-poly(acrylic acid) (PE-g-AA) and the olefin reversible coordinates with the PE-g-AA–Ag⁺ complex membranes were studied. Infrared and nuclear magnetic resonance spectra confirmed the complex formation between the carboxylic acid of the PE-g-AA and the Ag⁺ ion. Also, the Ag⁺ ion in PE-g-AA-Ag⁺ membrane was assumed to be a fixed carrier that adsorbs and transports olefin, thereby causing a selective olefin/paraffin separation. A theoretical model of the PE-g-AA-Ag⁺ (olefin) complex was proposed. The coordination number of Ag⁺ ion binding to the carboxylic acid of PE-g-AA is about 1.6 in glycerol solution. The coordination number of olefin binding to the Ag⁺ in the PE-g-AA–Ag⁺ complex membrane is 1. Moreover, the kinetics of olefin binding to the PE-g-AA–Ag⁺ complex membranes were studied. The equilibrium, association, and dissociation constants were also presented. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 909–917, 1997     

Interactions between metal chlorides and poly(vinyl pyrrolidone) in concentrated solutionsand solid‐state films

The rheological behavior of poly(vinyl pyrrolidone) (PVP)/N,N‐dimethylformamide (DMF) solutions containing metal chlorides (LiCl, CaCl₂, and CoCl₂) were investigated, and the results showed that the nature of the metal ions and their concentration had an obvious effect on the steady‐state rheological behavior of PVP–DMF solutions with different molecular weights. The apparent viscosity of the PVP–DMF solutions increased with an increasing metal‐ion concentration, and the viscosity increment was dependent on the metal‐ion variety_. For a CaCl₂‐containing PVP–DMF solution, for example, the critical shear rate at the onset of shear thinning became smaller with increasing CaCl₂ concentration. It was believed that multiple interactions among metal ions, carbonyl groups of PVP, and amide groups in DMF determined the solution properties of these complex fluids; therefore, ¹³C NMR spectroscopy was used to detect the interactions in systems of PVP–CaCl₂–DMF and PVP–LiCl–DMF solutions. NMR data showed that there were obvious interactions between the metal ions and the carbonyl groups of the PVP segments in the DMF solutions. Furthermore, IR spectra of the PVP/metal chloride composites demonstrated that the interaction between the metal ions and carbonyl groups in the PVP unit occurred and that the PVP chain underwent conformational variations with the metal‐ion concentration. DSC results indicated that the glass transition temperatures of the PVP/metal chloride composites increased with the addition of metal ions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1589–1598, 2007     

Preparation and optical properties of polyimide films linked with porphyrinato Pd (II) and Pt (II) complexes through a triazine ring and application toward oxygen sensors

5‐(3‐Aminophenyl)‐10,15,20‐tri(4‐methylphenyl) porphyrinato Pd (II) and Pt (II) complexes ( 2a ‐ Pd ) and ( 2a ‐ Pt ), respectively, were prepared from 5‐(3‐nitrophenyl)‐10,15,20‐tri(4‐methyl‐phenyl)porphyrin via two‐step reactions, and reacted with cyanuric chloride to produce corresponding porphyrin derivatives ( 3a ‐ Pd ) and ( 3a ‐ Pt ) with a dichlorotriazine ring. Aromatic polyimides were prepared using diamine ( 4 ); triazine dichlorides having porphyrin units ( 3a ‐ Pd ), ( 3a ‐ Pt ), ( 3c ‐ Pd ), and ( 3c ‐ Pt) ; fluoro‐functionality 6‐(p‐perfluorononenyl oxyanilino)triazine‐2,4‐dichloride ( 6 ); and tetracarboxylic dianhydride ( 5 ) in N‐methyl‐2‐pyrrolidone (NMP) at an elevated temperature up to 300 °C. The resulting viscous polymeric solution was cast on a glass plate, affording well‐proportioned reddish transparent films with number‐average molecular weights of 25,000–38,000. Glass transition temperatures of the polymers were ～230 °C; the films were stable up to 400 °C in air. The film emission spectra showed a broad peak ～670 nm, similar to those of porphyrins ( 2a ‐ Pd ) and ( 2a ‐ Pt ) dispersed in a polystyrene matrix. While the luminescence of these polymer films was quenched with oxygen, it rapidly recovered under a deoxygenated atmosphere. The polyimide film sensitivity to oxygen was higher under low oxygen concentrations than those of porphyrins ( 2a ‐ Pd ) and ( 2a ‐ Pt ) dispersed in polystyrene. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1086–1094     

X‐ray photoelectron spectroscopy study of oxygen‐containing polymer [poly(vinyl methyl ether), poly(vinyl methyl ketone), and poly(methyl methacrylate)] surfaces metalized by vacuum‐deposited nickel

Surfaces of poly(vinyl methyl ether) (PVME), poly(vinyl methyl ketone) (PVMK), and poly(methyl methacrylate) (PMMA) were covered with different thicknesses of nickel with a metal‐vapor‐condensation method, and the metal–polymer interfaces were analyzed by X‐ray photoelectron spectroscopy. In the very first steps of the metalization, it was found that a systematic degradation of the polymer surface occurs through CO or CO₂ losses, depending on the polymer functionalities. Then, at the interface with the polymer, the condensed metal reacts by oxidization with the oxygen atoms that are still available after the surface degradation. Nickel oxide is then formed at the interface, whatever the nature of the initial polymer functional group. These new oxide species are not chemically bonded to the polymer structure, and their formation is not affected by the type of bond existing between oxygen and carbon atoms in the original polymer. Finally, the accumulation of metal on the substrate induces an amorphization of the polymer carbon structure because thermal energy is transferred from the metal coating to the polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 82–94, 2002     

Nonisothermal crystallization and melting behavior of poly(β‐hydroxybutyrate)–Poly(vinyl‐acetate) blends

Nonisothermal crystallization and melting behavior of poly(β‐hydroxybutyrate) (PHB)–poly(vinyl acetate) (PVAc) blends from the melt were investigated by differential scanning calorimetry using various cooling rates. The results show that crystallization of PHB from the melt in the PHB–PVAc blends depends greatly upon cooling rates and blend compositions. For a given composition, the crystallization process begins at higher temperatures when slower scanning rates are used. At a given cooling rate, the presence of PVAc reduces the overall PHB crystallization rate. The Avrami analysis modified by Jeziorny and a new method were used to describe the nonisothermal crystallization process of PHB–PVAc blends very well. The double‐melting phenomenon is found to be caused by crystallization during heating in DSC. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 443–450, 1999     

Synthesis and Characterization of a Block Copolymer Containing Regioregular Poly(3‐hexylthiophene) and Poly(γ‐benzyl‐L‐glutamate)

Poly(3‐hexylthiophene)‐b‐poly(γ‐benzyl‐L ‐glutamate) (P3HT‐b‐PBLG) rod–rod diblock copolymer was synthesized by a ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride using a benzylamine‐terminated regioregular P3HT macroinitiator. The opto‐electronic properties of the diblock copolymer have been investigated. The P3HT precursor and the P3HT‐b‐PBLG have similar UV–Vis spectra both in solution and solid state, indicating that the presence of PBLG block does not decrease the effective conjugation length of the semiconducting polythiophene segment. The copolymer displays solvatochromic behavior in THF/water mixtures. The morphology of the diblock copolymer depends upon the solvent used for film casting and annealing results in morphological changes for both films deposited from chloroform and trichlorobenzene.

     

Poly[(2‐alkoxy‐5‐methyl‐1,3‐phenylene vinylene)‐alt‐(phenylene vinylene)] derivatives with different contents of cis‐ and trans‐olefins: The effect of the olefin bond geometry and conjugation length on luminescence

Poly[(2‐alkyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(1,3‐phenylenevinylene)]s ( 8 ) and poly[(2‐alkyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(1,4‐phenylenevinylene)]s ( 10 ) were synthesized by the Wittig reaction to provide materials containing 45–62% cis‐vinylene bonds. The optical characteristics of 8 and 10 were compared with those of their respective isomers, 3 and 4 , the cis‐vinylene contents of which were significantly lower (9–16%). Although a greater fraction of cis‐CH?CH linkages caused the absorption maximum (λ_max) of 8 and 10 to be slightly blueshifted (by ～3–6 nm) from that of 3 and 4 , the impact of the vinylene bond geometry appeared to be negligible on their fluorescence spectra. The fluorescence quantum efficiencies of 8 and 10 were estimated to be approximately 0.25 and 0.72, respectively. Both 8 (λ_max ≈ 445 or 462 nm) and 10 (λ_max ≈ 480 or 506 nm) were electroluminescent, showing effective color tuning by the controlled insertion of m‐phenylene moieties. The external electroluminescence quantum efficiencies were determined to be 4.26 × 10^?3% for 8 and 0.63% for 10 . The cis/trans‐vinylene bond ratio had a great impact on the electroluminescence device performance of 8 but a much smaller impact on the performance of 10 . © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 303–316, 2004     

Graphene‐doped electrochemical copolymer coating of 2,2‐bithiophene and 3‐methylthiophene for the highly effective solid‐phase microextraction of volatile benzene homologues

We report the electrochemical fabrication of a poly(2,2‐bithiophene‐co‐3‐methylthiophene)‐graphene composite coating and its application in the headspace solid‐phase microextraction and gas chromatography determination of benzenes (i.e., bromobenzene, 4‐bromotoluene, 2‐nitrotoluene, 3‐nitrotoluene and 1,2,4‐trichlorobenzene). The coating was uniform and showed cauliflower‐like microstructure. It had high thermal stability (up to 375°C) and could be used for at least 180 times of solid‐phase microextraction without a decrease in extraction performance. Furthermore, it presented high extraction capacity for the benzenes due to the hydrophobic effect and π–π interaction between the analytes and the coating. Under optimized extraction conditions, good linearity (correlation coefficients higher than 0.9946), wide linear range (0.01–50 μg/L), and low limits of detection (5.25–12.5 ng/L) were achieved for these analytes. The relative standard deviation was lower than 5.7% for five successive measurements with one fiber, and the relative standard deviation for fiber‐to‐fiber was 4.9–6.8% (n = 5). The solid‐phase microextraction and gas chromatography method was successfully applied for the determination of three real samples, and the recoveries for standards added were 89.6–106% for nail polish, 85.8–110% for hair dye, and 90–106.2% for correction fluid, respectively.     

In vitro antibacterial and antifungal assay of poly‐(ethylene oxamide‐N,N′‐diacetate) and its polymer–metal complexes

A new polyester, poly‐(ethylene oxamide‐N,N′‐diacetate) (PEODA), containing glycine moiety was synthesized by the reaction of oxamide‐N,N′‐diacetic acid and ethylene glycol and its polymer–metal complexes were synthesized with transition metal ions. The monomer oxamide‐N,N′‐diacetic acid was prepared by the reaction of glycine and diethyl oxalate. The polymer and its metal complexes were characterized by elemental analysis and other spectroscopic techniques. The in vitro antibacterial activities of all the synthesized polymers were investigated against some bacteria and fungi. The analytical data revealed that the coordination polymers of Mn(II), Co(II) and Ni(II) are coordinated with two water molecules, which are further supported by FTIR spectra and TGA data. The polymer–metal complexes showed excellent antibacterial activities against both types of microorganisms; the polymeric ligand was also found to be effective but less so than the polymer–metal complexes. On the basis of the antimicrobial behavior, these polymers may be used as antifungal and antifouling coating materials in fields like life‐saving medical devices and the bottoms of ships. Copyright © 2007 John Wiley & Sons, Ltd.     

Highly efficient protection of alcohols and phenols catalysed by tin porphyrin supported on MIL‐101

The catalytic activity of 5,10,15,20‐tetrakis(4‐aminophenyl)porphyrinatotin(IV) trifluoromethanesulfonate, [Sn^IV(TNH₂PP)(OTf)₂], supported on chloromethylated MIL‐101, was investigated in the trimethylsilylation of alcohols and phenols with hexamethyldisilazane (HMDS) and also their tetrahydropyranylation with 3,4‐dihydro‐2H‐pyran. Excellent yields, mild reaction conditions, short reaction times and reusability of the catalyst without significant decrease in its initial activity are noteworthy advantages of this supported catalyst. Copyright © 2015 John Wiley & Sons, Ltd.     

Organic electroluminescent devices using europium complex‐doped poly(N‐vinylcarbazole)

Electroluminescence (EL) properties of europium (Eu) complex‐doped poly(N‐vinylcarbazole) (PVK) were investigated. A device structure of glass substrate/indium‐tin oxide/hole‐injection layer/Eu complex‐doped PVK/hole‐blocking layer/electron transport layer/electron‐injection layer/Al was employed. Red emission originating from Eu complex was observed. Relatively high luminance of 50 cd/m² and an efficiency of 0.2% were obtained. Copyright © 2004 John Wiley & Sons, Ltd.     

A 4′‐(4‐carboxyphenyl)‐3,2′:6′,3′′‐terpyridine‐based luminescent cadmium(II) coordination polymer for the detection of 2,4,6‐trinitrophenol

The title coordination polymer, poly[bis[μ3‐4‐(3,2′:6′,3′′‐terpyridin‐4′‐yl)benzoato]cadmium(II)], [Cd(C₂₂H₁₄N₃O₂)₂]_n or [Cd(3‐cptpy)₂]_n, (I), has been synthesized solvothermally and characterized by IR spectroscopy, thermogravimetric analysis, and single‐crystal and powder X‐ray diffraction. The structure is composed of 3‐cptpy^? ligands bridging Cd atoms, with each Cd atom coordinated by six ligands and each ligand coordinating to three Cd atoms. Each Cd atom is in a slightly distorted trans‐N₂O₄ octahedral environment, forming a two‐dimensional layer structure with a (3,6)‐connected topology. Layers are linked to each other by π–π stacking, resulting in a three‐dimensional supramolecular framework. The strong luminescence and good thermal stability of (I) indicate that it can potentially be used as a luminescence sensor. The compound also shows a highly selective and sensitive response to 2,4,6‐trinitrophenol through the luminescence quenching effect.     

Yellow‐light‐emitting cyano‐substituted poly[(1,3‐phenylene vinylene)‐alt‐(1,4‐phenylene vinylene)] derivative: Its synthesis and optical properties

A soluble cyano‐substituted poly[(1,3‐phenylene vinylene)‐alt‐(1,4‐phenylene vinylene)] derivative ( 9 ) was synthesized and characterized. Comparison between 9 and its model compound ( 10 ) showed that the chromophore in 9 remained to be well defined as a result of a π‐conjugation interruption at adjacent m‐phenylene units. The attachment of a cyano substituent only at the β position of the vinylene allowed the maximum electronic impact of the cyano group on the optical properties of the poly(p‐phenylene vinylene) material. At a low temperature (?108 or ?198 °C), the vibronic structures of 9 and 10 were partially resolved. The absorption and emission spectra of a film of 9 were less temperature‐dependent than those of a film of 10 , indicating that the former had a lower tendency to aggregate. A light‐emitting diode (LED) based on 9 emitted yellow light (λ_max ≈ 578 nm) with an external quantum efficiency of 0.03%. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3149–3158, 2003     

Zinc(II) complexes of Triaza and Amidinate ligands: Efficient initiators for the ring‐opening polymerization of ε‐Caprolactone and rac‐Lactide

Zinc complexes supported by tertiary 1,3,5‐triazapenta‐1,3‐dienate ligand (L¹) and N ‐benzoyl‐N′ ‐arylbenzamidinate [aryl =2,6‐diisopropylphenyl (L²), phenyl (L³)] ligands have been synthesized and characterized. The reaction of L¹H with ZnEt₂ affords a mononuclear zinc complex [L¹ZnEt] ( 1 ) in good yield. Tetra nuclear zinc complex [(L¹)₂Zn₄O(OAc)₄] ( 2 ) is prepared by treating L¹H with one equivalent of Zn(OAc)₂ in toluene. Further, dinuclear zinc complexes [L²ZnEt]₂ ( 3 ) and [L³ZnEt]₂ ( 4 ) are obtained in good yields from L²H and L³H with ZnEt₂ in toluene respectively_. The complexes 1–4 have been characterized by ¹H/¹³C NMR spectroscopy and single crystal X‐ray diffraction studies. All of the complexes have been explored for their catalytic activity toward the ring‐opening polymerization (ROP) of ε ‐caprolactone. It has been found that complex 1 is an active catalyst for the polymerization of ε ‐caprolactone in presence of a cocatalyst benzyl alcohol (BnOH). While complex 2 is as active as 1 there is no need for a cocatalyst for the polymerization to proceed. Dinuclear zinc complexes 3 and 4 show very high activity for the ROP of ε ‐caprolactone (CL) and rac ‐lactide (LA) without requiring a cocatalyst. The resultant polymers are found to have very high molecular weight (M _n = 296 X 10³ g mol⁻¹) and relatively narrow polydispersity index compared to 1 and 2 .     

A novel sorbent for chromatographic separations: A silica matrix modified with non‐covalently bonded tetrakis(β‐cyclodextrin)–porphyrin conjugates

We prepared new phases for LC that consisted of silica modified with non‐covalently bonded tetrakis(β‐cyclodextrin)–porphyrin (where cyclodextrin is CD) conjugates. The effects of the porphyrin core, type of spacer and β‐CD moieties on the behaviours of the modified phases for the separation of aromatic compounds (benzene, toluene, ethylbenzene, propylbenzene, butylbenzene, pentylbenzene, o‐terphenyl, triphenylene, phenol and caffeine) and fluorinated aromatic compounds (pentafluorobenzonitrile, pentafluoronitrobenzene and hexafluorobenzene) were studied using the Tanaka test. The results indicate that the non‐covalent substitution of silica with CD‐based macromolecules that have a porphyrin core can be a very effective method for preparing novel sorbents with specific chromatographic properties for applications in LC.     

Thermoplastic elastomers based on poly(l‐Lysine)‐Poly(ε‐Caprolactone) multi‐block copolymers

Novel thermoplastic elastomers based on multi‐block copolymers of poly(l ‐lysine) (PLL), poly(N‐ε‐carbobenzyloxyl‐l ‐lysine) (PZLL), poly(ε‐caprolactone) (PCL), and poly(ethylene glycol) (PEG) were synthesized by combination of ring‐opening polymerization (ROP) and chain extension via l ‐lysine diisocyanate (LDI). SEC and ¹H NMR were used to characterize the multi‐block copolymers, with number‐average molecular weights between 38,900 and 73,400 g/mol. Multi‐block copolymers were proved to be good thermoplastic elastomers with Young's modulus between 5 and 60 MPa and tensile strain up to 1300%. The PLL‐containing multi‐block copolymers were electrospun into non‐woven mats that exhibited high surface hydrophilicity and wettability. The polypeptide–polyester materials were biocompatible, bio‐based and environment‐friendly for promising wide applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3012–3018     

Strong ionic interactions in noncovalent complexes between poly(ethylene imine), a cationic electrolyte,and Cibacron Blue,a nucleotide mimic – implications for oligonucleotide vectors

Cationic polymers can bind DNA to form polyplexes, which are noncovalent complexes used for gene delivery into the targeted cells. For more insight on such biologically relevant systems, the noncovalent complexes between the cationic polymer poly(ethylene imine) (PEI) and the nucleotide mimicking dye Cibacron Blue F3G‐A (CB) were investigated using mass spectrometry methods. Two PEIs of low molecular weight were utilized (M_n ≈ 423 and 600 Da). The different types of CB anions produced by Na⁺/H⁺ exchanges on the three sulfonic acid groups of CB and their dehydrated counterparts were responsible for complex formation with PEI. The CB anions underwent noncovalent complex formation with protonated, but not with sodiated PEI. A higher proportion of cyclic oligomers were detected in PEI423 than PEI600, but both architectures formed association products with CB. Tandem mass spectrometry studies revealed a significantly stronger noncovalent interaction between PEI and dehydrated CB than between PEI and intact CB. Copyright © 2014 John Wiley & Sons, Ltd.