Spontaneous crosslinking of poly(1,5‐dioxepan‐2‐one) originating from ether bond fragmentation

The spontaneous reaction of unsaturated double bonds induced by the fragmentation of ether bonds is presented as a method to obtain a crosslinked polymer material. Poly(1,5‐dioxepan‐2‐one) (PDXO) was synthesized using three different polymerization techniques to investigate the influence of the synthesis conditions on the ether bond fragmentation. It was found that thermal fragmentation of the ether bonds in the polymer main chain occurred when the synthesis temperature was 140 °C or higher. The double bonds produced reacted spontaneously to form crosslinks between the polymer chains. The formation of a network structure was confirmed by Fourier transform infrared spectrometry and differential scanning calorimetry. In addition, the low molar mass species released during hydrolysis of the DXO polymers were monitored by ESI‐MS and MALDI‐TOF‐MS. Ether bond fragmentation also occurred during the ionization in the electrospray instrument, but predominantly in the lower mass region. No fragmentation took place during MALDI ionization, but it was possible to detect water‐soluble DXO oligomers with a molar mass up to approximately 5000 g/mol. The results show that ether bond fragmentation can be used to form a network structure of PDXO. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7258–7267, 2008     

Molecular level differentiation between end‐capped and intramolecular azofunctional oligo(ε‐caprolactone) positional isomers through liquid chromatography multistage mass spectrometry

End‐capped and intramolecular azofunctional oligocaprolactones were characterized at molecular level by liquid chromatography electrospray ionization mass spectrometry (ESI MS) and NMR spectroscopy. The Disperse Red 19 (DR19) azofunctional oligomers, DC, were synthesized by ring‐opening oligomerization of ε‐caprolactone (ε‐CL) initiated by the hydroxyl groups of DR19 azo dye. The reaction products consist of a minor fraction of end‐capped azo functional oligocaprolactone (α‐DC), that is, a single CL arm oligomer, and a major fraction of intramolecular azo functional oligocaprolactone (β‐DC), that is, a two CL arms oligomer. The chromatographic separation was used to discriminate between α‐DC and β‐DC, and the results were confirmed by MS/MS performed on an ESI ion trap instrument. The results supported by accurate mass data obtained for product ions using an ESI quadrupole time of flight instrument demonstrate the qualitative discrimination at the molecular level between intramolecular and end‐capped azofunctional oligoesters isomers through a relatively simple multistage mass spectrometry experiment. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Tuning the release rate of acidic degradation products through macromolecular design of caprolactone-based copolymers

Macromolecular engineering is presented as a tool to control the degradation rate and release rate of acidic degradation products from biomedical polyester ethers. Three different caprolactone/1,5-dioxepan-2-one (CL/DXO) copolymers were synthesized: DXO/CL/DXO triblock, CL/DXO multiblock, and random cross-linked CL/DXO copolymer. The relation of CL and DXO units in all three copolymers was 60/40 mol %. The polymer discs were immersed in phosphate buffer solution at pH 7.4 and 37 degrees C for up to 364 days. After different time periods degradation products were extracted from the buffer solution and analyzed. In addition mass loss, water absorption, molecular weight changes, and changes in thermal properties were determined. The results show that the release rate of acidic degradation products, a possible cause of acidic microclimates and inflammatory responses, is controllable through macromolecular design, i.e., different distribution of the weak linkages in the copolymers.     

Precision synthesis of microstructures in star‐shaped copolymers of ϵ‐caprolactone,L‐lactide,and 1,5‐dioxepan‐2‐one

Star‐shaped homo‐ and copolymers were synthesized in a controlled fashion using two different initiating systems. Homopolymers of ε‐caprolactone, L ‐lactide, and 1,5‐dioxepan‐2‐one were firstly polymerized using (I) a spirocyclic tin initiator and (II) stannous octoate (cocatalyst) together with pentaerythritol ethoxylate 15/4 EO/OH (coinitiator), to give polymers with identical core moieties. Our gained understanding of the versatile and controllable initiator systems kinetics, the transesterification reactions occurring, and the role which the reaction conditions play on the material outcome, made it possible to tailor the copolymer microstructure. Two strategies were used to successfully synthesize copolymers of different microstructures with the two initiator systems, i.e., a more multiblock‐ or a block‐structure. The correct choice of the monomer addition order enabled two distinct blocks to be created for the copolymers of poly(DXO‐co‐LLA) and poly(CL‐co‐LLA). In the case of poly(CL‐co‐DXO), multiblock copolymers were created using both systems whereas longer blocks were created with the spirocyclic tin initiator. © 2008 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 46: 1249–1264, 2008     

Designing of dipeptide‐based oligoconjugates as potential carrier for drug delivery. Pyroglutamil‐S‐glutamic acid bisoligo‐3‐hydroxybutyrates

In the present article, we describe the synthesis and characterization of conjugates based on pyroglutamyl‐S‐glutamic acid and bisoligo‐[R,S]‐3‐hydroxybutyrates (PyGlu‐S_‐Glu_bisOHB) using anionic ring opening polymerization of β‐butyrolactone with a dipeptide bearing two carboxylate groups as potassium salt. The results indicated that the above‐mentioned reaction is accompanied of oligomerization of β‐butyrolactone yielding (3‐hydroxybutyrates) oligomers with crotonate and carboxyl end groups. We report also the end group analysis of the synthesized conjugates using electrospray ionization tandem mass spectrometry (ESI‐MS), the latter confirmed the presence of a mixture of dipeptide conjugate with β‐butyrolactone oligomer chain and β‐butyrolactone homopolymer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4103–4111, 2008     

Controlled ring‐opening polymerization of lactones and lactides

1,5‐dioxepan‐2‐one (DXO) is presented as a versatile component in biodegradable polymers for biomedical applications. Copolymerization of DXO and L‐lactide yielded a semi‐crystalline, yet flexible, material where the extent of crystallinity and erosion characteristics were controlled by an appropriate choice of copolymer composition. Crosslinked PDXO was polymerized as a novel biodegradable elastomer. The degradation behavior of these materials were explored in vitro. Microspheres from poly(DXO‐co‐L‐LA) were prepared and shown to be promising candidates for controlled release. The polymer composition and drug solubility provided effective means of controlling the drug delivery pattern.     

Crosslinked poly(ester anhydride)s based on poly(ε‐caprolactone) and polylactide oligomers

Resorbable poly(ester anhydride) networks based on ε‐caprolactone, L ‐lactide, and D,L ‐lactide oligomers were synthesized. The ring‐opening polymerization of the monomers yielded hydroxyl telechelic oligomers, which were end‐functionalized with succinic anhydride and reacted with methacrylic anhydride to yield dimethacrylated oligomers containing anhydride bonds. The degree of substitution, determined by ¹³C NMR, was over 85% for acid functionalization and over 90% for methacrylation. The crosslinking of the oligomers was carried out thermally with dibenzoyl peroxide at 120 °C, leading to polymer networks with glass‐transition temperatures about 10 °C higher than those of the constituent oligomers. In vitro degradation tests, in a phosphate buffer solution (pH 7.0) at 37 °C, revealed a rapid degradation of the networks. Crosslinked polymers based on lactides exhibited high water absorption and complete mass loss in 4 days. In ε‐caprolactone‐based networks, the length of the constituent oligomer determined the degradation: PCL5‐AH, formed from longer poly(ε‐caprolactone) (PCL) blocks, lost only 40% of its mass in 2 weeks, whereas PCL10‐AH, composed of shorter PCL blocks, completely degraded in 2 days. The degradation of PCL10‐AH showed characteristics of surface erosion, as the dimensions of the specimens decreased steadily and, according to Fourier transform infrared, labile anhydride bonds were still present after 90% mass loss. © 2003 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3788–3797, 2003     

Ring‐opening metathesis polymerization of a modified linseed oil with varying levels of crosslinking

A commercial norbornyl‐functionalized linseed oil, blended with a bicyclic norbornene‐based crosslinking agent (at loadings ranging from 0 to 50 wt %) undergoes ring‐opening metathesis polymerization with the 1st generation Grubbs' catalyst to form a biorenewable polymer network. Comonomers are characterized, the thermal and mechanical properties of the cured systems are investigated by dynamic mechanical analysis, and thermal decomposition is evaluated by thermogravimetric analysis. The resin is shown to consist of a modified linseed oil and small oligomers of cyclopentadiene. Broad tan δ peaks suggest inhomogeneous phase morphologies, which result in complex crosslinking behaviors. The thermal stability of the polymers increases with increasing crosslinker content. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6851–6860, 2008     

Degradation of poly(butyl methacrylate) model compounds studied via high‐resolution electrospray ionization mass spectrometry

This study investigates the degradation behavior of poly(n‐butyl methacrylate) ( p(nBMA) ), poly(tert‐butyl methacrylate) ( p(tBMA) ), and poly(hexafluoro butyl methacrylate) ( p(HFBMA) ) on a molecular level under extreme environmental conditions. The polymers chosen are readily applicable in the formulation of surface coatings and were degraded under conditions which replicated the harsh Australian climate, in which surface coatings may reach temperatures of up to 95 °C and are exposed to broad‐spectrum UV radiation of up to 1 kW m^?2. The degradation profiles were mapped with high‐resolution electrospray ionization mass spectrometry (ESI‐MS) with a LCQ quadrupole ion trap mass analyzer, with the peak assignments confirmed to within 3 ppm using ESI‐MS with a LTQ‐Orbitrap mass detector. It was found that in all the butyl ester polymers analyzed herein—regardless of their tertiary side‐chain structure—the loss of the butyl ester group and subsequent formation of acid side groups are a component of the overall degradation pathway of poly(butyl methacrylate)s under these harsh conditions. However, it is also demonstrated that the magnitude of this pathway is intimately linked to the side‐chain structure with the propensity for degradation decreasing in the order p(tBMA) > p(nBMA) > p(HFBMA) . The degradation mechanisms identified in this study, in combination with the previous end‐group degradation studies of poly(methyl methacrylate) and poly(n‐butyl acrylate), have allowed a much deeper understanding of the molecular degradation behavior of poly(acrylate)s and poly(methacrylate)s in an extreme natural environment. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of star oligo/poly(2,2‐dimethyltrimethylene carbonate)s containing cholic acid moieties

Star oligo/poly(2,2‐dimethyltrimethylene carbonate)s containing cholic acid moieties were synthesized through the ring‐opening polymerization of 2,2‐dimethyltrimethylene carbonate (DTC) initiated by cholic acid with hydroxyl groups. Through the control of the feed ratio of the initiator cholic acid to the monomer DTC, a series of star oligomers/polymers with different molecular weights were obtained. The star oligomers/polymers were characterized with Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, combined size exclusion chromatography/multi‐angle laser light scattering analysis, wide‐angle X‐ray scattering, polarizing light microscopy, and differential scanning calorimetry. Compared with linear poly(2,2‐dimethyltrimethylene carbonate), these star oligo/poly(2,2‐dimethyltrimethylene carbonate)s had much faster hydrolytic degradation rates. With one of the star oligomers/polymers, a microsphere drug‐delivery system of a submicrometer size was fabricated with a very convenient ultrasonic dispersion method that did not involve toxic organic solvents. The in vitro drug release was studied. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6688‐6696, 2006     

Degradation mechanism of poly(ether‐urethane) Estane® induced by high‐energy radiation. II. Oxidation effects

To predict long‐term polymer behavior during a nuclear waste storage time, radiation effects on a segmented aromatic poly(ether‐urethane) induced by high‐energy radiation under oxygen atmosphere were investigated. To obtain a predictive model of polymer radio‐oxidation during several centuries, the first step consists to elaborate the elementary degradation mechanisms. Thus, electron paramagnetic resonance (EPR), Fourier transform infra‐red spectroscopy (FT‐IR), electrospray ionisation‐mass spectrometry (ESI‐MS), and gas mass spectrometry were carried out to identify radicals, chemical modifications, and gases to reach the radio‐oxidative mechanism at doses inferior than 1000 kGy. Degradation mainly occurs at urethane bonds and in polyether soft segments that produces stable oxidative products as formates, alcohols, carboxylic acids and H₂, CO₂ and CO gases. Predominant degradation occurred at polyether soft segments and crosslinking is in competition with scission. On the basis of the results, a mechanism of degradation for aromatic poly(ether‐urethane) is proposed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 861–878, 2008     

Short chain amphiphilic diblock co‐oligomers via RAFT polymerization

We demonstrate the ability of the reversible addition‐fragmentation chain transfer (RAFT) process to produce well‐defined block co‐oligomers for which each block has a narrow molecular weight distribution and degrees of polymerization ranging from 2 to 33. We exploit RAFT versatility to control the structure of the co‐oligomers and produce amphiphilic block co‐oligomers of styrene, acrylic acid and ethylene glycol. A detailed study shows that the amphiphilic diblock co‐oligomers self‐assemble in solution and form micelles or particles, depending on the hydrophobicity of the diblock. These oligomers present an excellent alternative to traditional amphiphilic molecules, by combining the properties of polymers with those of single molecule surfactants. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Disperse red 1 end capped oligoesters. Synthesis by noncatalyzed ring opening oligomerization and structural characterization

The synthesis of novel azofunctional oligoesters through bulk ring opening of ε‐caprolactone and D ,L ‐lactide (LA) at 100 and 130 °C, respectively, mediated by N‐ethyl‐N‐(2‐hydroxyethyl)‐4‐(4‐nitrophenylazo)aniline (Disperse Red 1) (DR1) is described. The synthetic procedure allows “clean” products because no catalysts were used in the reaction. Moreover, DR1 moiety is showed for the first time to promote the ring opening of cyclic esters. The molecular structure of the obtained oligoesters was established by NMR spectroscopy, MALDI ToF MS and electrospray ionization mass spectrometry (ESI MS). ESI‐MS/MS fragmentation experiments were used to demonstrate the nature of the chain end groups (hydroxyl and DR1). Intermolecular transesterification reactions were proved by mass spectrometry studies at least in the case of LA oligomerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 534–547, 2009     

Maleation of poly(3,4‐epoxy‐1‐butene) for accelerated crosslinking in the presence of a redox catalyst

Accelerated crosslinking of novel poly(3,4‐epoxy‐1‐butene) (3,4‐PEPB) oligomers in the presence of a cobalt‐based redox catalyst was investigated. Previous studies using model compounds, 3,4‐dimethoxy‐1‐butene and 1,4‐dimethoxy‐2‐butene, suggested that maleation of hydroxyl‐terminated 3,4‐PEPB oligomers would result in more rapid crosslinking in thin films. Novel maleated oligomers offered a unique combination of both electron‐rich and electron‐poor olefinic sites, and quantitative maleation significantly increased the crosslinking rate of 3,4‐PEPB. Efficient copolymerization between terminal maleate groups and olefinic groups in the repeating unit was proposed to account for accelerated crosslinking rates. Furthermore, the addition of novel reactive diluents, such as maleic acid mono‐ethyl ester, also effectively improved the 3,4‐PEPB crosslinking rate. Sol fraction measurements as a function of coating thickness revealed that the crosslinking rate versus oxygen diffusion was less significant for the maleated oligomers because of the presence of reactive electron‐poor olefins. Sol fractions were constant for catalyst concentrations greater than 0.25–0.50 wt % (as compared with oligomer feed). This observation suggested that a redox process was not a dominant factor in determining crosslinking rates at various experimental conditions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2789–2798, 2002     

Characterization of different poly(2‐oxazoline) block copolymers by MALDI‐TOF MS/MS and ESI‐Q‐TOF MS/MS

A complete library of poly(2‐oxazoline) block copolymers was synthesized via cationic ring opening polymerization for the characterization by two different soft ionization techniques, namely matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) and electrospray ionization quadrupole time‐of‐flight mass spectrometry (ESI‐Q‐TOF MS). In addition, a detailed characterization was performed by tandem MS to gain more structural information about the block copolymer composition and its fragmentation behavior. The fragmentation of the poly(2‐oxazoline) block copolymers revealed the desired polymer structure and possible side reactions, which could be explained by different mechanisms, like 1,4‐ethylene or hydrogen elimination and the McLafferty +1 rearrangement. Polymers with aryl side groups showed less fragmentation due to their higher stability compared to polymers with alkyl side groups. These insights represent a further step toward the construction of a library with fragments and their fragmentation pathways for synthetic polymers, following the successful examples in proteomics. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Isosorbide telechelic bio‐based oligomers

This article deals with the preparation of novel co‐oligoethers constituted with 1,3‐propanediol (PDO) and isosorbide units and, prepared according to two different melt processes, without any solvent in the presence of acid catalyst: co‐etherification of PDO and isosorbide (process A) and, trans‐etherification between polytrimethylene ether glycol (PTEG) and isosorbide (process B). Complementary analytical methods: D and 2D ¹H NMR and gas chromatography analysis, coupled with FID and MS‐MALDI‐TOF mass spectrometry, were performed to precisely define the microstructure of the final products. In particular, one can observe that two mechanisms involve during the reaction: etherification and trans‐etherification where isosorbide reacts decreasing the molar mass of polymers chains. This led to oligomers having isosorbide units at each extremity and little inner isosorbide units. Computational calculations have been performed in parallel, and the data well duplicate the experimental results. Finally, it was shown that these new telechelic oligoethers have higher compatibility to water and higher T_g level and thermal stability than PTEG homopolymer. Therefore, such oligomers can be considered as new intermediates for designing new surfactants and/or new copolymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2178–2189     

Synthesis of methacrylate derivatives oligomers by dithiobenzoate‐RAFT‐mediated polymerization

Reversible addition fragmentation chain transfer (RAFT) was used to synthesize methacrylic acid oligomers and oligo(methacrylic acid)‐b‐poly(methyl methacrylate) (PMAA‐b‐PMMA) with targeted degree of polymerization ≈ 10. Characterization is by size‐exclusion chromatography (SEC) and electrospray mass‐spectrometry. SEC data are presented as hydrodynamic volume distributions (HVDs), the only proper means to present comparative and meaningful SEC data when there is no unique relationship between size and molecular weight. The RAFT agent, (4‐cyanopentanoic acid)‐4‐dithiobenzoate (CPADB), produced dithiobenzoic acid as a side product during the polymerization of methacrylate derivatives. Precipitation in diethyl ether proved to be an easy way to remove this impurity from the PMAA‐RAFT oligomers. Both unpurified and purified macro‐RAFT agent were used to prepare amphiphilic PMAA‐b‐PMMA copolymers. Diblock copolymer prepared from the purified PMAA homopolymer had a narrower HVD in comparison to those obtained from the equivalent unpurified macro‐RAFT agent. This work shows that while cyanoisopropyl‐dithiobenzoate or CPADB are good RAFT agents for methacrylate derivatives, they exhibit some instability under typical polymerization conditions, and thus when oligomers are targeted, optimal control requires checking for the degradation product and appropriate purification steps when necessary (the same effect is present for larger polymers but is unimportant). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2277–2289, 2008     

Lipase‐Catalyzed Degradation of Polyester in Supercritical Carbon Dioxide

Enzymatic degradation of poly(ε‐caprolactone) has been successfully carried out in supercritical carbon dioxide (scCO₂). Candida antarctica lipase smoothly catalyzed the hydrolytic degradation in scCO₂ to give oligo(ε‐caprolactone). The degradation in the presence of acetone (5 vol.‐%) produced the oligomer of smaller molecular weight (less than 500) compared to that prepared without the additive. Matrix‐assisted laser desorption/ionization‐time of flight (MALDI‐TOF) mass spectrometry analysis showed that the degradation product was of a mixture of linear and cyclic oligomers. The addition of a very small amount of water also promoted the degradation of the polyester.     

Photomediated crosslinking of cinnamated PDMS for in situ direct photopatterning

Polydimethylsiloxane (PDMS) polymers incorporating pendant cinnamate groups have been synthesized and evaluated for their ability to form patterned thin films via photo‐crosslinking. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3482–3487, 2008