On the Reactivity of Platina‐β‐diketones – Synthesis and Characterization of Acylplatinum(II) Complexes

The platina‐β‐diketones [Pt₂{(COR)₂H}₂(μ‐Cl)₂] ( 1 , R = Me a , Et b ) react with phosphines L in a molar ratio of 1 : 4 through cleavage of acetaldehyde to give acylplatinum(II) complexes trans‐[Pt(COR)Cl(L)₂] ( 2 ) (R/L = Me/P(p‐FC₆H₄)₃ a , Me/P(p‐CH₂=CHC₆H₄)Ph₂ b , Me/P(n‐Bu)₃ c , Et/P(p‐MeOC₆H₄)₃ d ). 1 a reacts with Ph₂As(CH₂)₂PPh₂ (dadpe) in a molar ratio of 1 : 2 through cleavage of acetaldehyde yielding [Pt(COMe)Cl(dadpe)] ( 3 a ) (configuration index: SP‐4‐4) and [Pt(COMe)Cl(dadpe)] (configuration index: SP‐4‐2) ( 3 b ) in a ratio of about 9 : 1. All acyl complexes were characterized by ¹H, ¹³C and ³¹P NMR spectroscopy. The molecular structures of 2 a and 3 a were determined by single‐crystal X‐ray diffraction. The geometries at the platinum centers are close to square planar. In both complexes the plane of the acyl ligand is nearly perpendicular to the plane of the complex (88(2)° 2 a , 81.2(5)° 3 a ).     

The structure–activity relationship of some hexacoordinated dimethyltin(IV) complexes of fluorinated β‐diketone/β‐diketones and sterically congested heterocyclic β‐diketones

The study was focused on the structure–activity relationship of some newly synthesized hexacoordinated dimethyltin(IV) complexes of fluorinated β‐diketone/β‐diketones and sterically congested heterocyclic β‐diketones. These complexes were screened for their antibacterial activity against a Gram‐negative bacterium (Pseudomonas aeruginosa) and Gram‐positive bacteria (Streptomyces griseus, Staphylococcus aureus, Bacillus subtilis) and the results were compared with those of a standard antibacterial drug. Some of the complexes were also screened for their antifungal activity against various fungi (Aspergillus niger, A. flavus, Trichoderma viride, Fusarium oxysporum) and were found to be active. These new hexacoordinated complexes of dimethyltin(IV) were generated by reactions of dimethyltin(IV) dichloride and sodium salts of fluorinated β‐diketone/β‐diketones and sterically congested heterocyclic β‐diketones in 1:1:1 molar ratio in refluxing dry benzene. Plausible structures of these complexes were suggested with the aid of physicochemical and spectroscopic studies. ¹¹⁹Sn NMR spectral data revealed the presence of a hexacoordinated tin centre in these dimethyltin(IV) complexes. Copyright © 2015 John Wiley & Sons, Ltd.     

Zur Reaktivität von Titanocenkomplexen [Ti(Cp′)2(η2‐Me3SiC≡CSiMe3)] (Cp′ = Cp,Cp*) gegenüber Benzoldicarbonsäuren

On the Reactivity of Titanocene Complexes [Ti(Cp′)₂(η²‐Me₃SiC≡CSiMe₃)] (Cp′ = Cp, Cp*) towards Benzenedicarboxylic Acids Titanocene complexes [Ti(Cp′)₂(BTMSA)] ( 1a , Cp′ = Cp = η⁵‐C₅H₅; 1b , Cp′ = Cp* = η⁵‐C₅Me₅; BTMSA = Me₃SiC≡CSiMe₃) were found to react with iodine and methyl iodide yielding [Ti(Cp′)₂(μ‐I)₂] ( 2a / b ; a refers to Cp′ = Cp and b to Cp′ = Cp*), [Ti(Cp′)₂I₂] ( 3a / b ) and [Ti(Cp′)₂(Me)I] ( 4a / b ), respectively. In contrast to 2a , complex 2b proved to be highly moisture sensitive yielding with cleavage of HCp* [{Ti(Cp*)I}₂(μ‐O)] ( 7 ). The corresponding reactions of 1a / b with p‐cresol and thiophenol resulted in the formation of [Ti(Cp′)₂{O(p‐Tol)}₂] ( 5a / b ) and [Ti(Cp′)₂(SPh)₂] ( 6a / b ), respectively. Reactions of 1a and 1b with 1,n‐benzenedicarboxylic acids (n = 2–4) resulted in the formation of dinuclear titanium(III) complexes of the type [{Ti(Cp′)₂}₂{μ‐1,n‐(O₂C)₂C₆H₄}] (n = 2, 8a / b ; n = 3, 9a / b ; n = 4, 10a / b ). All complexes were fully characterized analytically and spectroscopically. Furthermore, complexes 7 , 8b , 9a ·THF, 10a / b were also be characterized by single‐crystal X‐ray diffraction analyses.     

Investigation of pharmacophore and antipharmacophore features of certain dimethyltin(IV) complexes of flexible N‐protected amino acids and fluorinated β‐diketone/β‐diketones

A set of pentacoordinated dimethyltin(IV) complexes of flexible N‐protected amino acids and fluorinated β‐diketone/β‐diketones was screened for their antibacterial activity against Pseudomonas aeruginosa , Staphylococcus aureus and Streptomyces griseus . These pentacoordinated complexes of the type Me₂SnAB (where : R = CH(CH₃)C₂H₅, A₁H; CH₂CH(CH₃)₂, A₂H; CH(CH₃)₂, A₃H; CH₂C₆H₅, A₄H; and BH = R'C(O)CH₂C(O)R″: R′ = C₆H₅, R″ = CF₃, B₁H; R′ = R″ = CH₃, B₂H; R′ = C₆H₅, R″ = CH₃, B₃H; R′ = R″ = C₆H₅, B₄H) were generated by the reactions of dimethyltin(IV) dichloride with sodium salts of flexible N‐protected amino acids (ANa) and fluorinated β‐diketone/β‐diketones (BNa) in 1:1:1 molar ratio in refluxing dry benzene solution. Plausible structures of these complexes were elucidated on the basis of physicochemical and spectral studies. ¹¹⁹Sn NMR spectral data revealed the presence of pentacoordinated tin centres in these dimethyltin(IV) complexes.     

Molybdän‐ und Wolfram‐Komplexe mit MNS‐Sequenzen. Die Kristallstrukturen von [MoCl3(N3S2)(1,4‐Dioxan)2] und [Mo2Cl2(μ‐NSN)2(μ‐O)(NCMe3)(OCMe3)2]2

Molybdenum and Tungsten Complexes with MNS Sequences. Crystal Structures of [MoCl₃(N₃S₂)(1,4‐dioxane)₂] and [Mo₂Cl₂(μ‐NSN)₂(μ‐O)(NCMe₃)(OCMe₃)₂]₂ The cyclo‐thiazeno complexes [Cl₃MNSNSN]₂ of molybdenum and tungsten react with 1,4‐dioxane in dichloromethane suspension to give the binuclear donor‐acceptor complexes [μ‐(1,4‐dioxane){MCl₃(N₃S₂)}₂] which are characterized by IR spectroscopy. With excess 1,4‐dioxane the molybdenum compound forms the complex [MoCl₃(N₃S₂)(1,4‐dioxane)₂] in which, according to the crystal structure determination, one of the dioxane molecules coordinates at the molybdenum atom, the other one at one of the sulfur atoms of the cyclo‐thiazeno ring. The μ‐(NSN^2–) complex [Mo₂Cl₂(μ‐NSN)₂(μ‐O)(NCMe₃)(OCMe₃)₂]₂ has been obtained by the reaction of [MoN(OCMe₃)₃] with trithiazyle chloride in carbontetrachloride solution. According to the crystal structure determination this compound forms centrosymmetric dimeric molecules via two of the nitrogen atoms of two of the μ‐(NSN) groups to give a Mo₂N₂ fourmembered ring. [MoCl₃(N₃S₂)(1,4‐dioxane)₂]: Space group P2₁/c, Z = 4, lattice dimensions at –70 °C: a = 1522.9(2); b = 990.3(1); c = 1161.7(1) pm; β = 106.31(1)°, R₁ = 0.0317. [Mo₂Cl₂(μ‐NSN)₂(μ‐O)(NCMe₃)(OCMe₃)₂]₂ · 4 CCl₄: Space group P2₁/c, Z = 2, lattice dimensions at –83 °C: a = 1216.7(1); b = 2193.1(2); c = 1321.8(1) pm; β = 98.23(1)°; R₁ = 0.0507.     

Zum Einfluß der PR3‐Liganden auf Bildung und Eigenschaften der Phosphinophosphiniden‐Komplexe [{η2‐tBu2P–P}Pt(PR3)2] und [{η2‐tBu2P1–P2}Pt(P3R3)(P4R′3)]

Coordination Chemistry of P‐rich Phosphanes and Silylphosphanes XXI The Influence of the PR₃ Ligands on Formation and Properties of the Phosphinophosphinidene Complexes [{η²‐^tBu₂P–P}Pt(PR₃)₂] and [{η²‐^tBu₂P¹–P²}Pt(P³R₃)(P⁴R′₃)] (R₃P)₂PtCl₂ and C₂H₄ yield the compounds [{η²‐C₂H₄}Pt(PR₃)₂] (PR₃ = PMe₃, PEt₃, PPhEt₂, PPh₂Et, PPh₂Me, PPh₂ⁱPr, PPh₂^tBu and P(p‐Tol)₃); which react with ^tBu₂P–P=PMe^tBu₂ to give the phosphinophosphinidene complexes [{η²‐^tBu₂P–P}Pt(PMe₃)₂], [{η²‐^tBu₂P–P}Pt(PEt₃)₂], [{η²‐^tBu₂P–P}Pt(PPhEt₂)₂], [{η²‐^tBu₂P–P}Pt(PPh₂Et)₂], [{η²‐^tBu₂P–P}Pt(PPh₂Me)₂], [{η²‐^tBu₂P–P}Pt(PPh₂ⁱPr], [{η²‐^tBu₂P–P}Pt(PPh₂^tBu)₂] and [{η²‐^tBu₂P–P}Pt(P(p‐Tol)₃)₂]. [{η²‐^tBu₂P–P}Pt(PPh₃)₂] reacts with PMe₃ and PEt₃ as well as with ^tBu₂PMe, PⁱPr₃ and P(c‐Hex)₃ by substituting one PPh₃ ligand to give [{η²‐^tBu₂P¹–P²}Pt(P³Me₃)(P⁴Ph₃)], [{η²‐^tBu₂P¹–P²}Pt(P³Ph₃)(P⁴Me₃)], [{η²‐^tBu₂P¹–P²}Pt(P³Et₃)(P⁴Ph₃)], [{η²‐^tBu₂P¹–P²}Pt(P³Me^tBu₂)(P⁴Ph₃)], [{η²‐^tBu₂P¹–P²}Pt(P³ⁱPr₃)(P⁴Ph₃)] and [{η²‐^tBu₂P¹–P²}Pt(P³(c‐Hex)₃)(P⁴Ph₃)]. With ^tBu₂PMe, [{η²‐^tBu₂P–P}Pt(P(p‐Tol)₃)₂] forms [{η²‐^tBu₂P¹–P²}Pt(P³Me^tBu₂)(P⁴(p‐Tol)₃)]. The NMR data of the compounds are given and discussed with respect to the influence of the PR₃ ligands.     

Tris[3‐hydroxy‐2(1 H)‐pyridinonato]‐Komplexe von Al3+, Cr3+ und Fe3+ – Kristall‐ und Molekülstrukturen von 3‐Hydroxy‐2(1 H)‐pyridinon und Tris[3‐hydroxy‐2(1 H)‐pyridinonato]chrom(III)

Tris[3‐hydroxy‐2(1 H)‐pyridinonato] Complexes of Al³⁺, Cr³⁺, and Fe³⁺ – Crystal and Molecular Structures of 3‐Hydroxy‐2(1 H)‐pyridinone and Tris[3‐hydroxy‐2(1 H)‐pyridinonato]chromium(III) Tris[3‐hydroxy‐2(1 H)‐pyridinonato] complexes of Al³⁺, Cr³⁺ and Fe³⁺ are obtained by reactions of 3‐hydroxy‐2(1 H)pyridinone with the hydrates of AlCl₃, CrCl₃ or Fe(NO₃) in aqueous alkaline solutions as polycrystalline precipitates. The compounds are isotypic. X‐ray structure determinations were performed on single crystals of the uncoordinated 3‐hydroxy‐2(1 H)‐pyridinone ( 1 ) (orthorhombic, space group P2₁2₁2₁, a = 405.4(1), b = 683.0(1), c = 1770.3(3) pm, Z = 4) and of the chromium compound 3 (rhombohedral with hexagonal setting, space group R3c, a = 978.1(1), c = 2954.0(1) pm, Z = 6).     

Monomere und polymere Dimethylaminothioquadratato‐Komplexe: Die Kristallstrukturen von Nickel(II)‐, Cobalt(II)‐, Silber(I)‐, Platin(II)‐, Gold(I)‐, Quecksilber(II)‐ und Blei(II)‐Dimethylaminothioquadrataten

Monomeric and Polymeric Dimethylaminothiosquarato Complexes: The Crystal Structures of Nickel(II), Cobalt(II), Silver(I), Platinum(II), Gold(I), Mercury(II) and Lead(II) Dimethylaminothiosquarates The ligand 2‐dimethylamino‐3, 4‐dioxo‐cyclobut‐1‐en‐thiolate, Me₂N‐C₄O₂S⁻ (L) forms neutral and anionic complexes with nickel(II), cobalt(II)‐, silver(I)‐, platinum(II)‐, gold(I)‐, mercury(II)‐ and lead(II). According to the crystal structures of seven complexes the ligand is O, S‐chelating in [Ni(L)₂(H₂O)₂]·2 H₂O, [Co(L)₂(CH₃OH)₂] and (with limitations) in [Pb(L)₂·DMF]. In the remaining compounds the ligand behaves essentially as a thiolate ligand. The platinum, gold and mercury complexes [TMA]₂[Pt(L)₄], [TMA] [Au(L)₂] and [Hg(L)₂] are monomeric. In [TMA][Ag₂(L)₃]·5.5 H₂O a chain‐like structure was found. In the asymmetric unit of this structure eight silver ions, with mutual distances in the range 2.8949(4) to 3.1660(3)Å, are coordinated by twelve thiosquarato ligands. [Pb(L)₂·DMF] has also a polymeric structure. It contains a core of edge‐bridged, irregular PbS₄ polyhedra. TMA[Au(H₂NC₄O₂S)₂] has also been prepared and its structure elucidated.     

Zur Reaktivität von alkylthioverbrückten 44‐CVE‐triangularen Platinclustern: Umsetzungen mit bidentaten Phosphanliganden

On the Reactivity of Alkylthio Bridged 44 CVE Triangular Platinum Clusters: Reactions with Bidentate Phosphine Ligands The 44 cve (cluster valence electrons) triangular platinum clusters [{Pt(PR₃)}₃(μ‐SMe)₃]Cl (PR₃ = PPh₃, 2a ; P(4‐FC₆H₄)₃, 2b ; P(n‐Bu)₃, 2c ) were found to react with PPh₂CH₂PPh₂ (dppm) in a degradation reaction yielding dinuclear platinum(I) complexes [{Pt(PR₃)}₂(μ‐SMe)(μ‐dppm)]Cl (PR₃ = PPh₃, 3a ; P(4‐FC₆H₄)₃, 3b ; P(n‐Bu)₃; 3e ) and the platinum(II) complex [Pt(SMe)₂(dppm)] ( 4 ), whereas the addition of PPh₂CH₂CH₂PPh₂ (dppe) to cluster 2a afforded a mixture of degradation products, among others the complexes [Pt(dppe)₂] and [Pt(dppe)₂]Cl₂. On the other hand, the treatment of cluster 2a with PPh₂CH₂CH₂CH₂PPh₂ (dppp) ended up in the formation of the cationic complex [{Pt(dppp)}₂(μ‐SMe)₂]Cl₂ ( 5 ). Furthermore, the terminal PPh₃ ligands in complex 3a proved to be subject to substitution by the stronger donating monodentate phosphine ligands PMePh₂ and PMe₂Ph yielding the analogous complexes [{Pt(PR₃)}₂(μ‐SMe)(μ‐dppm)]Cl (PR₃ = PMePh₂, 3c ; PMe₂Ph, 3d ). NMR investigations on complexes 3 showed an inverse correlation of Tolmans electronic parameter ν with the coupling constants ¹J(Pt,P) and ¹J(Pt,Pt). All compounds were fully characterized by means of NMR and IR spectroscopy. X‐ray diffraction analyses were performed for the complexes [{Pt{P(4‐FC₆H₄)₃}}₂(μ‐SMe)(μ‐dppm)]Cl ( 3b ), [Pt(SMe)₂(dppm)] ( 4 ), and [{Pt(dppp)}₂(μ‐SMe)₂]Cl₂ ( 5 ).     

2, 4‐Dimethylpenta‐1, 3‐dien‐ und 2, 4‐Dimethylpentadienyl‐Komplexe des Rhodiums und Iridiums

2, 4‐Dimethylpenta‐1, 3‐diene and 2, 4‐Dimethylpentadienyl Complexes of Rhodium and Iridium The complexes [(η⁴‐C₇H₁₂)RhCl]₂ ( 1 ) (C₇H₁₂ = 2, 4‐dimethylpenta‐1, 3‐diene) and [(η⁴‐C₇H₁₂)₂IrCl] ( 2 ) were obtained by interaction of C₇H₁₂ with [(η²‐C₂H₄)₂RhCl]₂ and [(η²‐cyclooctene)₂IrCl]₂, respectively. The reaction of 1 or 2 with CpTl (Cp = η⁵‐C₅H₅) yields the compounds [CpM(η⁴‐C₇H₁₂)] ( 3a : M = Rh; 3b : M = Ir). The hydride abstraction at the pentadiene ligand of 3a , b with Ph₃CBF₄ proceeds differently depending on the solvent. In acetone or THF the “half‐open” metallocenium complexes [CpM(η⁵‐C₇H₁₁)]BF₄ ( 4a : M = Rh; 4b : M = Ir) are obtained exclusively. In dichloromethane mixtures are produced which additionally contain the species [(η⁵‐C₇H₁₁)M(η⁵‐C₅H₄CPh₃)]BF₄ ( 5a : M = Rh; 5b : M = Ir) formed by electrophilic substitution at the Cp ring, as well as the η³‐2, 4‐dimethylpentenyl compound [(η³‐C₇H₁₃)Rh{η⁵‐C₅H₃(CPh₃)₂}]BF₄ ( 6 ). By interaction of 2, 4‐dimethylpentadienyl potassium with 1 or 2 the complexes [(η⁴‐C₇H₁₂)M(η⁵‐C₇H₁₁)] ( 7a : M = Rh; 7b : M = Ir) are generated which show dynamic behaviour in solution; however, attempts to synthesize the “open” metallocenium cations [(η⁵‐C₇H₁₁)₂M]⁺ by hydride abstraction from 7a , b failed. The new compounds were characterized by elemental analysis and spectroscopically, 4b and 5a also by X‐ray structure analysis.     

Synthese,Struktur und Reaktivität von η1und η3‐Allyl‐Rhenium‐Carbonylen

Synthesis, Structure, and Reactivity of η¹‐ and η³‐Allyl Rhenium Carbonyls In (η³‐C₃H₅)Re(CO)₄ one CO ligand can be substituted by PPh₃, pyridine, isocyanide and benzonitrile. With 1,2‐bis(diphenylphosphino)ethylene, 1,1′‐bis(diphenylphosphino)ferrocene and 1,2‐bis(4‐pyridyl)ethane dinuclear ligand bridged complexes are obtained. The η³‐η¹ conversion of the allyl ligand occurs on reaction of (η³‐C₃H₅)Re(CO)₄ with the bidendate ligands 1,2‐bis(diphenylphosphino)ethane and 1,3‐bis(diphenylphosphino)propane and with 2,2′‐bipyridine (L–L) which gives the complexes (η¹‐C₃H₅)Re(CO)₃(L–L). By reaction of (η³‐C₃H₅)Re(CO)₄ with bis(diphenylphosphino)methane the allyl group is protonated and under elemination of propene the complex (OC)₃Re(Ph₂PCHPPh₂)(η¹‐Ph₂PCH₂PPh₂) ( 19 ) with a diphosphinomethanide ligand is formed. On heating solutions of (η³‐C₃H₅)Re(CO)₄ and (η³‐C₃H₅)Re(CO)₃(CN‐2,5‐Me₂C₆H₃) ( 5 ) in methanol the methoxy bridged compounds Re₄(CO)₁₂(OH)(OMe)₃ and Re₂(CO)₄(CN‐2,5‐Me₂C₆H₃)₄(μ‐OMe)₂ ( 20 ) were isolated. The crystal structures of (η³‐C₃H₅)Re(CO)₃(CNCH₂SiMe₃) ( 4 ), [(η³‐C₃H₅)(OC)₃Re]₂‐ (μ‐bis‐(diphenylphosphino)ferrocene) ( 8 ), (η¹‐C₃H₅)Re(CO)₃‐ (bpy) ( 14 ), of 19 , 20 and of (OC)₃Re‐[Ph₂P(CH₂)₃PPh₂]Cl ( 16 ) were determined by X‐ray diffraction.     

Metallkomplexe mit N2O2S2‐Koordinationssphäre. Synthese und Charakterisierung der Cobalt(II)‐, Nickel(II)‐ und Kupfer(II)‐Komplexe eines 15‐ und eines 16‐gliedrigen N,N′‐bis(2‐hydroxyethyl)‐funktionalisierten makrocyclischen Liganden

Metal Complexes with N₂O₂S₂ Donor Set. Synthesis and Characterization of the Cobalt(II), Nickel(II), and Copper(II) Complexes of a 15‐ and a 16‐Membered Bis(2‐hydroxyethyl) Pendant Macrocyclic Ligand The macrocyclic ligands 6, 10‐bis(2‐hydroxyethyl)‐7, 8, 9, 11, 17, 18‐hexahydro‐dibenzo‐[e, n][1, 4, 8, 12]‐dithiadiaza‐cyclopentadecine ( 1 ) (L¹) and 5, 13‐bis(2‐hydroxyethyl)‐7, 8, 9, 10, 16, 17, 18, 19, 20‐nonahydro‐dibenzo‐[g, o][1, 9, 5, 13]‐dithiadiaza‐cyclohexadecine (L⁴) have been prepared. They form the stable complexes [CoL¹(‐H)CoL¹](ClO₄)₃ ( 2 ), [NiL¹](ClO₄)₂·MeOH ( 3 ), Λ‐[CuL¹](ClO₄)₂·MeOH ( 4a ) and rac‐[CuL¹](ClO₄)₂·MeOH ( 4b ), [NiL⁴](ClO₄)₂ ( 5 ), and [CuL⁴](ClO₄)₂ ( 6 ). The compounds 1 to 6 have been characterized by standard methods and single‐crystal X‐ray diffraction. In the complexes 2 to 6 the metal atoms are octahedrally coordinated by the N₂O₂S₂ donor set of the ligands. L¹ and L⁴ are folded herein along the N···M···S‐ and the N···M···N′‐axes, respectively. This results at the metal atom in a all‐cis‐configuration for the complexes of L¹ and a trans‐N₂‐cis‐O₂‐cis‐S₂‐configuration for the complexes of L⁴. The cobalt(II) complex 2 is a dimer, bridged by a rather short hydrogen bridge of 2.402(12)Å length. The copper(II) complexes of L¹ and L⁴ differ with respect to the Jahn‐Teller‐distortion.     

Zur Darstellung und Reaktivität von Tetraalkylcyclobutadienplatin(II)-Komplexen [PtCl2(C4R4)L]

Preparation and Reactivity of Platinumcyclobutadiene Complexes [PtCl₂(C₄R₄)L] H[PtCl₃(C₄H₈)], prepared by reduction of H₂[PtCl₆] with n-butanol reacts with 2-pentyne to give equal amounts of the regioisomers [PtCl₂(C₄Et₂Me₂)] ( 3 a, 3 b ). An equimolar mixture of 2-butyne/3-hexyne reacts under the same conditions to give [PtCl₂(C₄Me₄)] ( 1 ), [PtCl₂(C₄Et₄)] ( 2 ) and [PtCl₂(C₄Et₂Me₂)] ( 3 a ) in a molar ratio 1:1.3:6.6. 1 and 2 react with ligands L (L = py a , p-tol b , PPh₃ c , AsPh₃ d , SbPh₃ e ) to give complexes of the type [PtCl₂(C₄R₄)L]. The complexes were characterized by microanalysis as well as by i.r., ¹H- and ¹³C-n.m.r. spectroscopy.     

Reaktivität von Monophosphan-Platin(0)-Verbindungen gegenüber Schwefeldioxid

Reactivity of Monophosphine Platinum(0) Complexes with SO₂ . The addition reaction of (PPh₃)Pt(ViSi) (ViSi = {η²-H₂C?CHSiMe₂}₂O) ( 1 ) with SO₂ gives within 30 min the red SO₂ complex (PPh₃)Pt(η²-H₂C?CHSiMe₂- OSiMe₂CH?CH₂)(SO₂) ( 2 ). A reaction time of 24 h with SO₂ leads to the elimination of the ViSi ligand, and the unstable monomeric intermediate (PPh₃)Pt(SO₂) cyclo- trimerizes to the stable cluster [Pt(PPh₃)(SO₂)]₃ ( 3 ). 3 is also obtained within 30 min by the reaction of (PPh₃)Pt(C₂H₄)₂ ( 4 ) with SO₂. The crystal structure of 3 has been determined; space group P2₁/n, Z = 4, a = 1 606.1(3), b = 1 019.3(1), c = 3 624.6(5) pm, β = 93.67°, R/R_w = 0.102/0.121.     

On the reactivity of platina‐β‐diketones: a straightforward synthesis of trans‐acetylchlorobis(phosphine)platinum(II) complexes and their reactivity

The platina‐β‐diketone [Pt₂{(COMe)₂H}₂(µ‐Cl)₂] ( 1 ) was found to react with monodentate phosphines to yield acetyl(chloro)platinum(II) complexes trans‐[Pt(COMe)Cl(PR₃)₂] (PR₃ = PPh₃, 2a ; P(4‐FC₆H₄)₃, 2b ; PMePh₂, 2c ; PMe₂Ph, 2d ; P(n‐Bu)₃, 2e ; P(o‐tol)₃, 2f ; P(m‐tol)₃, 2g ; P(p‐tol)₃, 2h ). In the reaction with P(o‐tol)₃ the methyl(carbonyl)platinum(II) complex [Pt(Me)Cl(CO){P(o‐tol)₃}] ( 3a ) was found to be an intermediate. On the other hand, treating 1 with P(C₆F₅)₃ led to the formation of [Pt(Me)Cl(CO){P(C₆F₅)₃}] ( 3b ), even in excess of the phosphine. Phosphine ligands with a lower donor capability in complexes 2 and the arsine ligand in trans‐[Pt(COMe)Cl(AsPh₃)₂] ( 2i ) proved to be subject to substitution by stronger donating phosphine ligands, thus forming complexes trans‐[Pt(COMe)Cl(L)L′] (L/L′ = AsPh₃/PPh₃, 4a ; PPh₃/P(n‐Bu)₃, 4b ) and cis‐[Pt(COMe)Cl(dppe)] ( 4c ). Furthermore, in boiling benzene, complexes 2a – 2c and 2i underwent decarbonylation yielding quantitatively methyl(chloro)platinum(II) complexes trans‐[Pt(Me)Cl(L)₂] (L = PPh₃, 5a ; P(4‐FC₆H₄)₃, 5b ; PMePh₂, 5c ; AsPh₃, 5d ). The identities of all complexes were confirmed by ¹H, ¹³C and ³¹P NMR spectroscopy. Single‐crystal X‐ray diffraction analyses of 2a ·2CHCl₃, 2f and 5b showed that the platinum atom is square‐planar coordinated by two phosphine ligands (PPh₃, 2a ; P(o‐tol)₃, 2f ; P(4F‐C₆H₄)₃, 5b ) in mutual trans position as well as by an acetyl ligand ( 2a, 2f ) and a methyl ligand ( 5b ), respectively, trans to a chloro ligand. Single‐crystal X‐ray diffraction analysis of 3b exhibited a square‐planar platinum complex with the two π‐acceptor ligands CO and P(C₆F₅)₃ in mutual cis position (configuration index: SP‐4‐3). Copyright © 2005 John Wiley & Sons, Ltd.     

Syntheses,and Crystal Structures of Indium Complexes with η2‐Piperidinyldithiocarbamate and η2‐Pyridine‐2‐Thionate Containing Ligands: Structures of [In(η2‐S2CNC5H10)3] and [In(η2‐pyS)3]

The η²‐thio‐indium complexes [In(η²‐thio)₃] (thio = S₂CNC₅H₁₀, 2 ; SNC₄H₄, (pyridine‐2‐thionate, pyS, 3 ) and [In(η²‐pyS)₂(η²‐acac)], 4 , (acac: acetylacetonate) are prepared by reacting the tris(η²‐acac)indium complex [In(η²‐acac)₃], 1 with HS₂CNC₅H₁₀, pySH, and pySH with ratios of 1:3, 1:3, and 1:2 in dichloromethane at room temperature, respectively. All of these complexes are identified by spectroscopic methods and complexes 2 and 3 are determined by single‐crystal X‐ray diffraction. Crystal data for 2 : space group, C2/c with a = 13.5489(8) Å, b = 12.1821(7) Å, c = 16.0893(10) Å, β = 101.654(1)°, V = 2600.9(3) ų, and Z = 4. The structure was refined to R = 0.033 and Rw = 0.086; Crystal data for 3 : space group, P2₁ with a = 8.8064 (6) Å, b = 11.7047 (8) Å, c = 9.4046 (7) Å, β = 114.78 (1)°, V = 880.13(11) ų, and Z = 2. The structure was refined to R = 0.030 and Rw = 0.061. The geometry around the metal atom of the two complexes is a trigonal prismatic coordination. The piperidinyldithiocarbamate and pyridine‐2‐thionate ligands, respectively, coordinate to the indium metal center through the two sulfur atoms and one sulfur and one nitrogen atoms, respectively. The short C‐N bond length in the range of 1.322(4)–1.381(6) Å in 2 and C‐S bond length in the range of 1.715(2)–1.753(6) Å in 2 and 3 , respectively, indicate considerable partial double bond character.     

Structure and Properties of γ‐Brass‐Type Pt2Zn11—δ (0.2 < δ < 0.3)

The γ‐brass type phase Pt₂Zn_11—δ (0.2 < δ < 0.3) was prepared by reaction of the elements in evacuated silica ampoules. The structures of crystals grown in the presence of excess zinc or alternatively excess platinum were determined from single crystal X‐ray diffraction intensities and confirmed by Rietveld profile fits. Pt₂Zn_10.72(1) crystallizes in the space group I4¯3m, a = 908.55(4) pm, Z = 4. The structure refinement converged at R_F = 0.0302 for I_o > 2σ (I_o) for 293 symmetrically independent intensi ties and 19 variables. The structure consists of a 26 atom cluster which is comprised of four crystallographically distinct atoms. The atoms Zn(1), Pt(1), Zn(2) and Zn(3) form an inner tetrahedron IT, an outer tetrahedron OT, an octahedron OH, and a distorted cuboctahedron CO respectively. About 14 % of the Zn(1) sites are unoccupied. Pt₂Zn_10.73 melts at 1136(2) K. It is a moderate metallic conductor (ρ₂₉₈ = 0.2—0.9 mΩ cm) whose magnetic properties (χ_mol = —4.6 10^—10 to —5.4 10^—10 m³ mol^—1) are dominated by the core diamagnetism of its components.     

Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe2O3@TiO2 (γ‐Fe2O3@TiO2‐EG‐Cu(II)): A highly efficient magnetically separable heterogeneous nanocatalyst for one‐pot synthesis of highly substituted imidazoles

A simple, efficient and eco‐friendly procedure has been developed using Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe₂O₃@TiO₂ (γ‐Fe₂O₃@TiO₂‐EG‐Cu(II)) for the synthesis of 2,4,5‐trisubstituted and 1,2,4,5‐tetrasubstituted imidazoles, via the condensation reactions of various aldehydes with benzil and ammonium acetate or ammonium acetate and amines, under solvent‐free conditions. High‐resolution transmission electron microscopy analysis of this catalyst clearly affirmed the formation of a γ‐Fe₂O₃ core and a TiO₂ shell, with mean sizes of about 10–20 and 5–10 nm, respectively. These data were in very good agreement with X‐ray crystallographic measurements (13 and 7 nm). Moreover, magnetization measurements revealed that both γ‐Fe₂O₃@TiO₂ and γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) had superparamagnetic behaviour with saturation magnetization of 23.79 and 22.12 emu g^?1, respectively. γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) was found to be a green and highly efficient nanocatalyst, which could be easily handled, recovered and reused several times without significant loss of its activity. The scope of the presented methodology is quite broad; a variety of aldehydes as well as amines have been shown to be viable substrates. A mechanism for the cyclocondensation reaction has also been proposed.     

Synthese,Struktur und Reaktivität von Tris‐, Bis‐ und Mono(2,4‐dimethylpentadienyl)‐Komplexen des Neodyms,Lanthans und des Yttriums

The tris(2,4‐dimethylpentadienyl) complexes [Ln(η⁵‐Me₂C₅H₅)₃] (Ln = Nd, La, Y) are obtained analytically pure by reaction of the tribromides LnBr₃·nTHF with the potassium compound K(Me₂C₅H₅)(thf)_n in THF in good yields. The structural characterization is carried out by X‐ray crystal structure analysis and NMR‐spectroscopically. The tris complexes can be transformed into the dimeric bis(2,4‐dimethylpentadienyl) complexes [Ln₂(η⁵‐Me₂C₅H₅)₄X₂] (Ln, X: Nd, Cl, Br, I; La, Br, I; Y, Br) by reaction with the trihalides THF solvates in the molar ratio 2:1 in toluene. Structure and bonding conditions are determined for selected compounds by X‐ray crystal structure analysis and NMR‐spectroscopically in general. The dimer‐monomer equilibrium existing in solution was investigated NMR‐spectroscopically in dependence of the donor strength of the solvent and could be established also by preparation of the corresponding monomer neutral ligand complexes [Ln(η⁵‐Me₂C₅H₅)₂X(L)] (Ln, X, L: Nd, Br, py; La, Cl, thf; Br, py; Y, Br, thf). Finally the possibilities for preparation of mono(2,4‐dimethylpentadienyl)lanthanoid(III)‐dibromid complexes are shown and the hexameric structure of the lanthanum complex [La₆(η⁵‐Me₂C₅H₅)₆Br₁₂(thf)₄] is proved by X‐ray crystal structure analysis.