Macromolecular brushes synthesized by “grafting from” approach based on “click chemistry” and RAFT polymerization

Well‐defined macromolecular brushes with poly(N‐isopropyl acrylamide) (PNIPAM) side chains on random copolymer backbones were synthesized by “grafting from” approach based on click chemistry and reversible addition‐fragmentation chain transfer (RAFT) polymerization. To prepare macromolecular brushes, two linear random copolymers of 2‐(trimethylsilyloxy)ethyl methacrylate (HEMA‐TMS) and methyl methacrylate (MMA) (poly(MMA‐co‐HEMA‐TMS)) were synthesized by atom transfer radical polymerization and were subsequently derivated to azide‐containing polymers. Novel alkyne‐terminated RAFT chain transfer agent (CTA) was grafted to polymer backbones by copper‐catalyzed 1,3‐dipolar cycloaddition (azide‐alkyne click chemistry), and macro‐RAFT CTAs were obtained. PNIPAM side chains were prepared by RAFT polymerization. The macromolecular brushes have well‐defined structures, controlled molecular weights, and molecular weight distributions (M_w/M_n ≦ 1.23). The RAFT polymerization of NIPAM exhibited pseudo‐first‐order kinetics and a linear molecular weight dependence on monomer conversion, and no detectable termination was observed in the polymerization. The macromolecular brushes can self‐assemble into micelles in aqueous solution. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 443–453, 2010     

Sulfonation of polystyrene: Toward the “ideal” polyelectrolyte

Sulfonation of narrow polydispersity polystyrene, PS, standards remains the method of choice for generating polystyrene sulfonate, PSS, samples with defined composition. Although a variety of sulfonation techniques have been described, relatively little is reported on the material obtained, which is used for so many studies on the fundamental behavior of polyelectrolytes. Here, we show that powdered polystyrene treated with concentrated sulfuric acid (96%) at 90 °C without catalyst yields fully sulfonated PSS. Extensive characterization with ¹H and ¹³C NMR as well as size exclusion chromatography coupled with static and dynamic light scattering shows no evidence of sulfone crosslinking or chain degradation under the conditions used. Though mono‐sulfonated as soon as it dissolves in the acid, the PSS contains about 6% meta substitution. Sulfonation kinetics for this heterogeneous reaction depend strongly on particle size, sulfuric acid content and temperature. For preparing perdeuterated PSS from the corresponding PS it is essential to employ D₂SO₄, as about half of the aromatic units undergo H/D exchange during sulfonation. The remaining ortho H/D may be exchanged with extended exposure to the concentrated sulfuric acid, but the meta site is deactivated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2416–2624     

Synthesis of di‐ and tetra‐adducts by addition of polystyrene macroradicals onto fullerene C60

Br‐terminated polystyrenes of controlled molar masses and low polydispersities prepared by atom transfer radical polymerization (ATRP) can be converted to macroradicals using an appropriate catalytic complex (CuBr/bipyridine/100 °C). The addition of this macroradicals PS° to 6–6 bonds of C₆₀ follows a specific atom transfer radical addition mechanism that favors the grafting of even number of chains onto the fullerene core. This peculiar mechanism, resulting from the properties of C₆₀, offers an easy synthetic route toward well‐defined di‐ and tetra‐adducts. In these adducts the disturbance of the electronic structure of the fullerene is kept at its minimum, as only one double bond needs to be opened on the C₆₀ to add two PS chains and only two double bonds are converted to single bonds in the tetra‐adduct. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3456–3463, 2004     

High density cationic polymer brushes from combined “click chemistry” and RAFT‐mediated polymerization

A simple method for preparing cationic poly[(ar‐vinylbenzyl)trimethylammonium chloride)] [poly(VBTAC)] brushes was used by combined technology of “click chemistry” and reversible addition‐fragmentation chain transfer (RAFT) polymerization. Initially, silicon surfaces were modified with RAFT chain transfer agent by using a click reaction involving an azide‐modified silicon wafer and alkyne‐terminated 4‐cyanopentanoic acid dithiobenzoate (CPAD). A series of poly(VBTAC) brushes on silicon surface with different molecular weights, thicknesses, and grafting densities were then synthesized by RAFT‐mediated polymerization from the surface immobilized CPAD. The immobilization of CPAD on the silicon wafer and the subsequent polymer formation were characterized by X‐ray photoelectron spectroscopy, water contact angle measurements, grazing angle‐Fourier transform infrared spectroscopy, atomic force microscopy, and ellipsometry analysis. The addition of free CPAD was required for the formation of well‐defined polymer brushes, which subsequently resulted in the presence of free polymer chains in solution. The free polymer chains were isolated and used to estimate the molecular weights and polydispersity index of chains attached to the surface. In addition, by varying the polymerization time, we were able to obtain poly(VBTAC) brushes with grafting density up to 0.78 chains/nm² with homogeneous distributions of apparent needle‐like structures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Characterization of catechol‐containing natural thermosetting polymer “urushiol” thin film

Urushi (oriental lacquer) is made from the sap of Rhus vernicifera and consists mainly of the catechol derivative urushiol. Thermal curing of urushiol, unlike other catechol derivatives, is possible because of the unsaturated double bonds in the long hydrocarbon side chain. We described here a simple, efficient method to produce a thermally cross‐linked urushi thin film using iron(II) acetate as the additive. The cured thin films showed robust, flexible feature as confirmed by strain‐induced elastic buckling instability for mechanical measurements (SIEBIMM) and bulging experiments. In contrast, a thin film of poly(dopamine) that is a typical catechol derivative without long hydrocarbon side chain showed brittleness. The long hydrocarbon side chain of urushiol plays an important role for both thermal processability and superior mechanical properties of the material. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3688–3692     

Synthesis of arborescent polystyrene by “click” grafting

A method was developed for the synthesis of arborescent polystyrene by “click” coupling. Acetylene functionalities were introduced on linear polystyrene (M_n = 5300 g/mol, M_w/M_n = 1.05) by acetylation and reaction with potassium hydroxide, 18‐crown‐6 and propargyl bromide in toluene. Polymerization of styrene with 6‐tert‐butyldimethylsiloxyhexyllithium yielded polystyrene (M_n = 5200 g/mol, M_w/M_n = 1.09) with a protected hydroxyl chain end. Deprotection, followed by conversions to tosyl and azide functionalities, provided the side chain material. Coupling with CuBr and N,N,N′,N″,N″‐pentamethyldiethylenetriamine proceeded in up to 94% yield. Repetition of the grafting cycles led to well‐defined (M_w/M_n ≤ 1.1) polymers of generations G1 and G2 in 84% and 60% yield, respectively, with M_n and branching functionalities reaching 2.8 × 10⁶ g/mol and 460, respectively, for the G2 polymer. Coupling longer (M_n = 45,000 g/mol) side chains with acetylene‐functionalized substrates was also examined. For a linear substrate, a G0 polymer with M_n = 4.6 × 10⁵ g/mol and M_w/M_n = 1.10 was obtained in 87% yield; coupling with the G0 (M_n = 52,000 g/mol) substrate produced a G1 polymer (M_n = 1.4×10⁶ g/mol, M_w/M_n = 1.38) in 28% yield. The complementary approach using azide‐functionalized substrates and acetylene‐terminated side chains was also investigated, but proceeded in lower yield. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1730–1740     

Synthesis of polystyrene nanoparticles “armoured” with nanodimensional graphene oxide sheets by miniemulsion polymerization

Polystyrene particles “armoured” with nanosized graphene oxide (GO) sheets have been prepared by aqueous miniemulsion polymerization of styrene, exploiting the amphiphilic properties of GO in the absence of conventional surfactants. The nanoscale GO sheets were prepared from graphite nanofibers of diameter approximately 100 nm based on a novel procedure, thus effectively ensuring the absence of larger sheets. Polymerization proceeded to high conversion with minor coagulation, with final number‐average particle diameters of approximately 500 nm, but relatively broad particle size distributions. Scanning electron microscopy analysis revealed particles with a textured surface, consistent with the expected morphology. Interestingly, analysis of GO sheets recovered from the polymerization revealed that the GO sheets are partially reduced during the polymerization—approximately 50% of the initial carboxyl groups of the GO were lost, consistent with some loss in colloidal stability at high conversion. The overall approach offers a convenient and attractive synthetic route to novel graphene‐based polymeric nanostructures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Tearing energy study of “oriented and relaxed” polystyrene in the glassy state

To study the effect of processing history, molecular weight/molecular weight distribution, and thermal history on solid state properties (in particular fracture properties and orientation), carefully characterized polydisperse and monodisperse polystyrene samples were drawn above T_g and the orientation frozen in. The objective was to simulate the incidental orientation of polymer chains after processing, molding, and so forth (e.g., injection or compression, blow molding) as a result of melt flow. A series of polystyrene samples was produced by hot drawing at temperatures of 113 and 148 °C, followed by a relaxation period, and then a quench to below T_g. The level of segmental orientation imposed in the samples was determined by birefringence measurements. The tear energy of the sheets was measured at 20 °C by tearing along the draw direction, ultimately giving a value for the fracture energy, G_3C. Samples of high draw ratio and low segmental orientation were unexpectedly found to have highly anisotropic fracture properties despite the low level of optical anisotropy. The fracture properties also depended significantly on whether the samples were drawn with or without lateral constraint. The results are compared with measurements of isotropic samples and the findings of a previous investigation utilizing SANS and birefringence. Modeling the drawing conditions at the chain level using a recent nonlinear tube theory explains how birefringence alone is an inadequate measure of molecular orientation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 377–394, 2007     

Preparation of comb‐like copolymers with amphiphilic poly(ethylene oxide)‐b‐polystyrene graft chains by combination of “graft from” and “graft onto” strategies

A novel method for preparation the comb‐like copolymers with amphihilic poly(ethylene oxide)‐block‐poly(styrene) (PEO‐b‐PS) graft chains by “graft from” and “graft onto” strategies were reported. The ring‐opening copolymerization of ethylene oxide (EO) and ethoxyethyl glycidyl ether (EEGE) was carried out first using α‐methoxyl‐ω‐hydroxyl‐poly(ethylene oxide) (mPEO) and diphenylmethyl potassium (DPMK) as coinitiation system, then the EEGE units on resulting linear copolymer mPEO‐b‐Poly(EO‐co‐EEGE) were hydrolyzed and the recovered hydroxyl groups were reacted with 2‐bromoisobutyryl bromide. The obtained macroinitiator mPEO‐b‐Poly(EO‐co‐BiBGE) can initiate the polymerization of styrene by ATRP via the “Graft from” strategy, and the comb‐like copolymers mPEO‐b‐[Poly(EO‐co‐Gly)‐g‐PS] were obtained. Afterwards, the TEMPO‐PEO was prepared by ring‐opening polymerization (ROP) of EO initiated by 4‐hydroxyl‐2,2,6,6‐tetramethyl piperdinyl‐oxy (HTEMPO) and DPMK, and then coupled with mPEO‐b‐[Poly(EO‐co‐Gly)‐g‐PS] by atom transfer nitroxide radical coupling reaction in the presence of cuprous bromide (CuBr)/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) via “Graft onto” method. The comb‐like block copolymers mPEO‐b‐[Poly(EO‐co‐Gly)‐g‐(PS‐b‐PEO)] were obtained with high efficiency (≥90%). The final product and intermediates were characterized in detail. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1930–1938, 2009     

Growth and SIMS study of d.c.‐sputtered indium oxide films on silicon

Indium oxide thin films were grown onto Si and quartz substrates by d.c. reactive sputtering of elemental indium. X‐ray diffraction and transmission electron microscopy studies confirmed the single‐phase and polycrystalline nature of the films. Secondary ion mass spectrometry investigations of In₂O₃/Si structures showed the formation of an inhomogeneous interface region ～20 nm thick between In₂O₃ and Si. The overall feature of the interface remained the same under annealing in an oxygen atmosphere, but annealing in an argon atmosphere drastically altered the nature of the interface. The observations indicate that interface formation and stability depend critically on the availability of oxygen. Copyright © 2005 John Wiley & Sons, Ltd.     

Preparation and characterization of cyclic polystyrene with short poly(2‐tert‐butylbutadiene) sequences

A polystyrene‐block‐oligo(2‐tert‐butylbutadiene)‐block‐polystyrene triblock copolymer was prepared and cyclized by end‐to‐end ring closure. Ring‐shaped polystyrene‐block‐oligo(2‐tert‐butylbutadiene) was isolated from the coupling product via gel permeation chromatography (GPC) fractionation. The ring polymer was ozonized for decomposition of the oligo(2‐tert‐butylbutadiene) sequences selectively referring to the linear molecule. From GPC analysis of the decomposed products by ozonolysis, it was quantitatively confirmed that the fractionated product was 86% ring molecules. Single chain dimensions of the ring and linear molecules in a good solvent, benzene, and in a θ solvent, cyclohexane, were measured with small‐angle neutron scattering. The ratios of the radii of gyration, R_g(ring)/R_g(linear), were 0.780 in benzene and 0.789 in cyclohexane. These were compared with theoretically predicted values. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1582–1589, 2002     

Grafting of methacrylates and styrene on to polystyrene backbone via a “grafting from” ATRP process at ambient temperature

Well defined graft copolymers are prepared by “grafting from” atom transfer radical polymerization (ATRP) at room temperature (30 °C). The experiments were aimed at grafting methacrylates and styrene at latent initiating sites of polystyrene. For this purpose, the benzylic hydrogen in polystyrene was subjected to allylic bromination with N‐bromosuccinimide and azobisisobutrylnitirle to generate tertiary bromide ATRP initiating sites (Br? C? PS). The use of Br? C? PS with lesser mol % of bromide initiating groups results in better control and successful graft copolymerization. This was used to synthesize a series of new graft copolymers such as PS‐g‐PBnMA, PS‐g‐PBMA, PS‐g‐GMA, and PS‐g‐(PMMA‐b‐PtBA) catalyzed by CuBr/PMDETA system, in bulk, at room temperature. The polymers are characterized by GPC, NMR, FTIR, TEM, and TGA. Graft copolymerization followed by block polymerization enabled the synthesis of highly branched polymer brush, in which the grafting density can be adjusted by appropriate choice of bromide concentration in the polystyrene. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3818–3832, 2007     

A “self‐pinning” adhesive based on responsive surface wrinkles

Surface wrinkles are interesting since they form spontaneously into well‐defined patterns. The mechanism of formation is well‐studied and is associated with the development of a critical compressive stress that induces the elastic instability. In this work, we demonstrate surface wrinkles that dynamically change in response to a stimulus can improve interfacial adhesion with a hydrogel surface through the dynamic evolution of the wrinkle morphology. We observe that this control is related to the local pinning of the crack separation pathway facilitated by the surface wrinkles during debonding, which is dependent on the contact time with the hydrogel. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Topological “interfacial” polymer chemistry: Dependency of polymer “shape” on surface morphology and stability of layer structures when heating organized molecular films of cyclic and linear block copolymers of n‐butyl acrylate‐ethylene oxide

The “topological polymer chemistry” of amphiphilic linear and cyclic block copolymers at an air/water interface was investigated. A cyclic copolymer and two linear copolymers (AB‐type diblock and ABA‐type triblock copolymers) synthesized from the same monomers were used in this study. Relatively stable monolayers of these three copolymers were observed to form at an air/water interface. Similar condensed‐phase temperature‐dependent behaviors were observed in surface pressure–area isotherms for these three monolayers. Molecular orientations at the air/water interface for the two linear block copolymers were similar to that of the cyclic block copolymer. Atomic force microscopic observations of transferred films for the three polymer types revealed the formation of monolayers with very similar morphologies at the mesoscopic scale at room temperature and constant compression speed. ABA‐type triblock linear copolymers adopted a fiber‐like surface morphology via two‐dimensional crystallization at low compression speeds. In contrast, the cyclic block copolymer formed a shapeless domain. Temperature‐controlled out‐of‐plane X‐ray diffraction (XRD) analysis of Langmuir–Blodgett (LB) films fabricated from both amphiphilic linear and cyclic block copolymers was performed to estimate the layer regularity at higher temperatures. Excellent heat‐resistant properties of organized molecular films created from the cyclic copolymer were confirmed. Both copolymer types showed clear diffraction peaks at room temperature, indicating the formation of highly ordered layer structures. However, the layer structures of the linear copolymers gradually disordered when heated. Conversely, the regularity of cyclic copolymer LB multilayers did not change with heating up to 50 °C. Higher‐order reflections (d₀₀₂, d₀₀₃) in the XRD patterns were also unchanged, indicative of a highly ordered structure. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 486–498     

Heterograft copolymers of poly(ε‐caprolactone) prepared by combination of ATRA “grafting onto” and ATRP “grafting from” processes

This paper aims at reporting on the synthesis of a heterograft copolymer by combining the “grafting onto” process based on atom transfer radical addition (ATRA) and the “grafting from” process by atom transfer radical polymerization (ATRP). The statistical copolymerization of ε‐caprolactone (εCL) and α‐chloro‐ε‐caprolactone (αClεCL) was initiated by 2,2‐dibutyl‐2‐stanna‐1,3‐dioxepane (DSDOP), followed by ATRA of parts of the chlorinated units of poly(αClεCL‐co‐εCL) on the terminal double bond of α‐MeO,ω‐CH₂?CH? CH₂? CO₂‐poly(ethylene oxide) (PEO). The amphiphilic poly(εCL‐g‐EO) graft copolymer collected at this stage forms micelles as supported by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The unreacted pendant chloro groups of poly(εCL‐g‐EO) were used to initiate the ATRP of styrene with formation of copolymer with two populations of randomly distributed grafts, that is PEO and polystyrene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6015–6024, 2006     

Analysis of polystyrene surface properties on thin film bonding under carbon dioxide pressure using nanoparticle embedding technique

A gold nanoparticle embedding technique is used to determine how vacuum and pressured carbon dioxide (CO₂) affect polystyrene (PS) thin film properties. The pressured CO₂ greatly increased the gold nanoparticle embedding depth, possibly due to a low cohesive energy density near the film surface. For the monodisperse PS used in this study (M_n = 214,000), two spin‐coated thin films with intimate contact can be bonded below the bulk glass transition temperature (T_g) under CO₂ pressure when the embedded depth is larger than half of the gyration radius of PS molecules. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1535–1542, 2009