Characterization of surface energetic heterogeneity of pure and poly (acrylic acid)‐adsorbed carbon nanotubes by deconvoluting the nitrogen adsorption isotherm

The surface energetic heterogeneity of pure and poly (acrylic acid) (PAA)‐adsorbed carbon nanotubes (CNTs) were studied by a nitrogen probe adsorption technique in a wide range of pressures. The adsorption energy distributions (AEDs) were calculated from the low‐pressure data of isotherms by deconvoluting the low‐pressure experimental nitrogen adsorption isotherms. The surface of pure CNTs is heterogeneous as its AED presents four peaks at 42, 52, 57 and 78 K. It is observed that the AED of CNTs can be evidently modified by PAA adsorption. While the PAA adsorption amount increases, the high‐energy peaks at 52, 57 and 78 K gradually weaken and diminish at last, whereas the low ones such as at 42 K strengthen and new peaks arise at 27 and 32 K. It is proposed that PAA molecules prefer interacting with and screening the higher energetic sites to the lower ones. It will facilitate the understanding of the polymer adsorption on energetic heterogeneity surfaces. Copyright © 2006 John Wiley & Sons, Ltd.     

Thermal Degradation and Flammability Properties of Poly(propylene)/Carbon Nanotube Composites

Nanocomposites based on poly(propylene) and multi‐wall carbon nanotubes (up to 2 vol.‐%) were melt blended, yielding a good dispersion of nanotubes without using any organic treatment or additional additives. Carbon nanotubes are found to significantly enhance the thermal stability of poly(propylene) in nitrogen at high temperatures. Specifically, the nanotube additive greatly reduced the heat release rate of poly(propylene). They are found to be at least as effective a flame‐retardant as clay/poly(propylene) nanocomposites.     

Adsorption of poly(N‐ethyl‐4‐vinyl pyridinium bromide) onto langmuir‐blodgett films built up from amphiphilic polymers

The interaction of a strong cationic polyelectrolyte, poly(N‐ethyl‐4‐vinyl pyridinium bromide), with Langmuir‐Blodgett (LB) films built up from four monolayers of amphiphilic derivatives of the alternating copolymers of maleic acid and alkenes (one of the monolayers was formed by the amphiphilic copolymer containing pyrenyl groups as fluorescent labels) was examined. Transformations of absorbance spectra and quenching of fluorescence of the LB films were detected after their contact with aqueous solutions of the cationic polyelectrolyte. These changes were attributed to the adsorption of poly(N‐ethyl‐4‐vinyl pyridinium bromide) onto such films. The efficiency of this process was found to be rather sensitive to the variations in pH of the surrounding medium: adsorption of the cationic polyelectrolyte onto the LB films was pronounced in basic media while it became rather weak in acidic media.     

The electronic structure and adsorption geometry of L-histidine on Cu(110)

The adsorption of L-histidine on clean and oxygen-covered Cu(110) surfaces has been studied by soft X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The valence band spectra, carbon, nitrogen and oxygen 1 s XPS and N K edge absorption spectra were measured for submonolayer, monolayer, and multilayer films. The spectra provide a detailed picture of the electronic structure and adsorption geometry at each coverage. In the monolayer, the histidine molecules are randomly oriented, in contrast to the submonolayer regime, where the molecules are coordinated to the copper surface with the imidazole functional group nearly parallel to, and strongly interacting with, the surface. The pi*/sigma* intensity ratio in NEXAFS spectra at the nitrogen edge varies strongly with angle, showing the imidazole ring is oriented. Adsorption models are proposed.     

Adsorption and orientation kinetics of self‐assembled films of octadecyltrimethoxysilane on aluminium oxide surfaces

X‐ray photoelectron spectroscopy (XPS) and near‐edge x‐ray absorption fine structure (NEXAFS) spectroscopy have been used to study the time‐dependent adsorption and molecular orientation behaviour of octadecyltrimethoxysilane (ODTMS) on native aluminium oxide surfaces. By measuring the adsorption isotherm using XPS, we show that ODTMS molecules exhibit oscillatory adsorption. The oscillatory adsorption behaviour for ODTMS is analogous to that observed for its simpler short‐chain ‘cousin’—propyltrimethoxysilane (PTMS)—and suggests that the length of the functional alkyl chain on an organosilane does not have a significant influence upon the oscillatory adsorption mechanism. The oscillation in the ODTMS adsorption isotherm shows a maximum and a minimum in coverage at an adsorption time of ～30 and ～65 s, respectively, for a 0.75% ODTMS solution in a 90% ethanol–10% water mixture at pH 4. The time‐dependent orientation behaviour of the ODTMS molecules during adsorption was examined using angular‐dependent carbon K‐edge NEXAFS spectroscopy. We show that the alignment of the ODTMS film changes systematically with deposition time and appears to be correlated with coverage measurements obtained using XPS. In particular, by combining the XPS and NEXAFS results we demonstrate that the minimum ODTMS coverage corresponds to a film whose alignment appears to be predominantly randomized. Copyright © 2005 John Wiley & Sons, Ltd.     

Preparation and Characterization of Functional Multi-Walled Carbon Nanotubes (MWCNTs) through Acidification and Radiation Induced Graft Polymerization

High Energy Chemistry - In this paper, a step-by-step method is proposed to graft poly(acrylic acid) (PAA) onto carbon nanotubes via gamma-ray irradiation induced graft polymerization. Different...     

Effect of carbon nanotubes and their dispersion on thermal curing of polyimide precursors

The process of thermal imidization reaction is significant for temperature and time control in the polyimide industry. Here, we report the effect of carbon nanotubes and their states of dispersion on the thermal imidization of the precursor films of polyimide (poly(amic acid)) for the first time. The curing process was followed by measuring Fourier transform-infrared (FT-IR) spectra, fluorescence spectra, thermogravimetric-differential scanning calorimeter (TG-DSC) properties and the refractive indices of films. It was found that by evenly dispersing 1 wt% of carbon nanotubes assisted by a dispersant in the poly(amic acid),the full imidization temperature of the polyimide can be reduced from 300 °C to 250 °C. Different states of distribution of CNTs were observed by light microscopy and scanning electron microscopy, and proved that a better dispersion of carbon nanotubes dramatically enhanced the speed of imidization. Moreover, the DSC results showed that lower decomposition temperature of poly(amic acid) could be obtained with more uniform distribution of carbon nanotubes, which means the process of cyclodehydration of the poly(amic acid) was accelerated.     

Effect of oxyfluorination on electromagnetic interference shielding behavior of MWCNT/PVA/PAAc composite microcapsules

Composite microcapsules of poly(vinyl alcohol)/poly(acrylic acid)/multi-walled carbon nanotubes were prepared and the electromagnetic interference shielding behavior was evaluated for the composite microcapsules. The dispersion and adhesion of multi-walled carbon nanotubes in microcapsules were improved by the surface modification through direct oxyfluorination which introduced polar groups on the multi-walled carbon nanotubes. The composite microcapsules containing the oxyfluorinated multi-walled carbon nanotubes showed significant increases in permittivity, permeability, and electromagnetic interference shielding efficiency. The electromagnetic interference shielding efficiency of composite microcapsule increased up to 51 dB mainly base on the absorption mechanism.     

Phenol adsorption on different nano-sized carbon materials: first comparative study

Carbon nanofibres and multi-branched carbon nanotubes are synthesized by using a new, proposed in this study method. The acid–base, adsorption and geometric properties of nanomaterials are characterised. Next we present first comparative adsorption and calorimetric studies of phenol uptake from aqueous solutions on mentioned nano-sized carbon materials and on nanotubes having similar diameter. The comparison of carbon nanofibres, multi-branched carbon nanotubes, and multi walled carbon nanotubes shows that for non-porous carbon nanomaterials the concentration of basic surface functionalities determines the mechanism of phenol adsorption. In consequence, larger phenol adsorption is recorded for the most basic nanomaterials (nanofibres and multi walled nanotubes) and smaller for multi branched nanotubes having the smallest surface concentration of basic groups. Possible explanation of differences between enthalpy of phenol displacement on graphite and on studied carbon adsorbents is also given.     

聚丙烯酸功能化多壁碳纳米管

Covalent functionalization of multiwalled carbon nanotubes （MWNT） with poly（acrylic acid） has been successfully achieved via grafting of poly（acryloyl chloride） on nanotube surface by esterification reaction of acyl chloride-bound polymer with hydroxyl functional groups present on acid-oxidized MWNT and hydrolysis of polymer attached to nanotubes. Polymer-functionalized MWNT could possess remarkably high solubility in water, and their aqueous solution was very stable without any observable black deposit for a long time. Characterizations of such functionalized MWNT samples using Fourier transform infrared spectrometer, transmission electron microscopy and nuclear magnetic resonance techniques indicated that poly（acrylic acid） was covalently attached to the surface of MWNT.     

Oxygen-containing functional groups on single-wall carbon nanotubes: NEXAFS and vibrational spectroscopic studies.

Single-walled nanotubes (SWNTs) produced by plasma laser vaporization (PLV) and containing oxidized surface functional groups have been studied for the first time with NEXAFS. Comparisons are made to SWNTs made by catalytic synthesis over Fe particles in high-pressure CO, called HiPco material. The results indicate that the acid purification and cutting of single-walled nanotubes with either HNO3/H2SO4 or H2O2/H2SO4 mixtures produces the oxidized groups (O/C = 5.5-6.7%), which exhibit both pi*(CO) and sigma*(CO) C K-edge NEXAFS resonances. This indicates that both carbonyl (C=O) and ether C-O-C functionalities are present. Upon heating in a vacuum to 500-600 K, the pi*(CO) resonances are observed to decrease in intensity; on heating to 1073 K, the sigma*(CO) resonances disappear as the C-O-C functional groups are decomposed. Raman spectral measurements indicate that the basic tubular structure of the SWNTs is not perturbed by heating to 1073 K, based on the invariance of the ring breathing modes upon heating. The NEXAFS studies agree well with infrared studies which show that carboxylic acid groups are thermally destroyed first, followed by the more difficult destruction of ether and quinone groups. Single-walled nanotubes produced by the HiPco process, and not treated with oxidizing acids, exhibit an O/C ratio of 1.9% and do not exhibit either pi*(CO) or sigma*(CO) resonances at the detection limit of NEXAFS. It is shown that heating (to 1073 K) of the PLV-SWNTs containing the functional groups produces C K-edge NEXAFS spectra very similar to those seen for the HiPco material. The NEXAFS spectra are calibrated against spectra measured for a number of fused-ring aromatic hydrocarbon molecules containing various types of oxidized functional groups present on the oxidized SWNTs.     

催化辅助爆炸法合成碳纳米管

报道了以三硝基苯酚(苦味酸,C₆H₃N₃O₇)、乙酸钴[Co(Ac)₂]和菲(C₁₄H₁₀)作为爆炸物,通过热引发方式使其在不锈钢耐高压容器中发生爆炸反应来制备多壁碳纳米管.利用TEM,HRTEM和XRD等手段对碳纳米管和催化剂的形貌和结构进行表征,综合TEM和TG测试结果确定产物中碳纳米管的含量.结果表明,随着反应条件的变化,可获得外径分布在20～40nm范围内,管长为数十微米的多壁碳纳米管.金属钴催化剂在爆炸过程中原位生成.苦味酸装填密度的增大有利于碳纳米管含量的提高,优化条件(苦味酸的装填密度为0.2g/cm³)后碳纳米管的含量可达70%左右.     

Studies of modified carbon nanotubes by means of thermogravimetry Q-TG and sorptometry techniques

The paper presents the physicochemical (adsorption and porosity) properties of closed carbon nanotubes, opened through the action of an oxidizing acid and modified with metal ions of nickel, cobalt, and iron/cobalt. The carbon nanotubes were prepared via the oxidation process by means of 65 % nitric acid and/or nickel and cobalt nitrates dissolved with 65 % nitric acid. Using special thermogravimetry Q-TG and sorptometry methods physicochemical properties of pure and modified nanotube surfaces were investigated. A numerical and analytical procedure for the evaluation of heterogeneous properties (adsorption capacity, statistical number of adsorbed liquid layers, desorption energy distribution functions) on the basis of liquid thermodesorption Q-TG from the sample surfaces under the quasi-equilibrium conditions are presented. The calculations of the specific surface areas, pore size and volume, and fractal dimensions of carbon nanotubes were made from sorptometry data.     

Gas transport in surface‐modified low‐density polyethylene films with acrylic acid as a grafting agent

The modification of polyethylene by the grafting of poly(acrylic acid) onto the surface of one of the faces of low‐density polyethylene films with UV radiation is reported. The transport of oxygen, nitrogen, carbon monoxide, carbon dioxide, methane, ethane, ethylene, propane, and argon across surface‐modified films containing 3.7% poly(acrylic acid) has been investigated at several temperatures. The layer of poly(acrylic acid) grafted onto the surface of one of the faces of the films reduces the permeability coefficient of the gases by a factor of about 1/6. The sharp drop in the gas permeability as a result of the poly(acrylic acid) layer may arise either from the formation of ordered structures of the grafted chains or from the development of highly crosslinked structures. The values of the polymer–gas enthalpic interaction parameter for the modified film are higher than those for the unmodified one. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2828–2840, 2006     

Formation of fractal-like structures driven by carbon nanotubes-based collapsed hollow capsules

Carbon nanotubes (CNTs) based hollow capsules were obtained by degradation under acidic conditions of core-shell nanocomposites build up upon adsorption of multilayers of CNTs (shell) onto melamine-formaldehyde (MF) spheres (core). By evaporation of the dispersions obtained, polymeric fractal patterns from the degradation products of the MF core were formed onto silicon wafers. The proposed mechanism for the formation of these structures is based on the role of the capsules as arrangements of heterogeneities that facilitate the dewetting of the liquid polymeric films.     

Application of anomalous small‐angle X‐ray scattering to spherical polyelectrolyte brushes

The analysis of spherical polyelectrolyte brushes by anomalous small‐angle X‐ray scattering (ASAXS) is considered. The particles under consideration consist of a solid poly(styrene) core onto which chains of poly(acrylic acid) are grafted. If Rubidium ions are chosen as counterions, ASAXS can be applied to the study of these systems because the absorption edge of Rb (15199.6eV) can be reached by synchrotron radiation. Here we discuss the results to be obtained by the application of ASAXS to spherical polyelectrolyte brushes.     

Grafting of hyperbranched poly(amidoamine) onto carbon black surfaces using dendrimer synthesis methodology

To modify carbon black surface, the surface grafting of hyperbranched poly(amidoamine) onto the surface by using dendrimer synthesis methodology was investigated. Carbon black having amino groups (initiator sites) was prepared by the reduction of surface nitro groups introduced by nitration of aromatic rings. It was found that hyperbranched poly(amidoamine) was propagated from carbon black surface by repeating two processes: (1) Michael addition of methyl acrylate (MA) to surface amino groups and (2) amidation of the resulting esters with ethylenediamine: the percentage of poly(amidoamine) grafting reached to 96.2% after 10th‐generation. The grafting of hyperbranched poly(amidoamine) onto polystyrene‐bead as a model compound of carbon black was also achieved by the above procedures. However, the theoretical propagation of poly(amidoamine) dendrimer was not achieved, because of steric hindrance of grafted polymer. Hyperbranched poly(amidoamine)‐grafted carbon black gave a stable dispersion in a good solvent for poly(amidoamine). Copyright © 2001 John Wiley & Sons, Ltd.     

Geometric and Electronic Structures of Pyrazine Molecule Chemisorbed on Si(100) Surface by XPS and NEXAFS Spectroscopy

The geometric and electronic structures of several possible adsorption configurations of the pyrazine ({C\begin{document}$ _{4} $\end{document}}{H\begin{document}$ _{4} $\end{document}}{N\begin{document}$ _{2} $\end{document}}) molecule covalently attached to Si(100) surface, which is of vital importance in fabricating functional nano-devices, have been investigated using X-ray spectroscopies. The Carbon K-shell (1s) X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy of predicted adsorbed structures have been simulated by density functional theory with cluster model calculations. Both XPS and NEXAFS spectra demonstrate the structural dependence on different adsorption configurations. In contrast to the XPS spectra, it is found that the NEXAFS spectra exhibiting conspicuous dependence on the structures of all the studied pyrazine/Si(100) systems can be well utilized for structural identification. In addition, according to the classification of carbon atoms, the spectral components of carbon atoms in different chemical environments have been investigated in the NEXAFS spectra as well.