Synthesis,Characterization and Explosive Properties of 1,3‐Dimethyl‐5‐amino‐1H‐tetrazolium 5‐Nitrotetrazolate

1,3‐Dimethyl‐5‐amino‐1H‐tetrazolium 5‐nitrotetrazolate ( 5b ) was synthesized in high yield from 1,4‐dimethyl‐5‐amino‐1H‐tetrazolium iodide ( 5a ) and silver 5‐nitrotetrazolate. Both new compounds ( 5a and 5b ) were characterized using vibrational (IR and Raman) and multinuclear NMR spectroscopy (¹H, ¹³C and ¹⁵N), elemental analysis and single‐crystal X‐ray diffraction. 5a crystallizes in an orthorhombic cell: Pbca, a = 11.5016(4), b = 13.7744(5), c = 13.7744(5) Å, V = 1638.2(1) ų, Z = 8, ρ = 1.955 g cm^?3, R₁ = 0.0210 (F > 4σ(F)), wR₂ (all data) = 0.0542; whereas 5b crystallizes in a monoclinic cell: C1c, a = 14.5228(8), b = 5.0347(2), c = 13.7217(7) Å, β = 112.11(1)°, V = 929.6(2) ų, Z = 4, ρ = 1.630 g cm^?3, R₁ = 0.0279 (F > 4σ(F)), wR₂ (all data) = 0.0585. The sensitivity of 5b to classical stimuli was determined by using standard BAM tests and its thermal stability was assessed by DSC measurements. In addition, its heat of combustion was determined by bomb calorimetry measurements. The EXPLO5 was used to calculate the detonation pressure (P) and velocity (D) of 5b (P = 13.3 GPa and D = 6379 m s^?1), as well as those of its mixtures with ammonium nitrate (P = 23.2 GPa and D = 7862 m s^?1) and ammonium dinitramide (P = 29.6 GPa and D = 8594 m s^?1). Compound 5b is a hydrolytically stable solid with a high melting point (160 °C) and thermally stable to 190 °C with a very low sensitivity to friction (>360 N) and impact (>30 J) and good performance in combination with an oxidizer making it of interest in new environmentally friendly, insensitive explosive formulations.     

Synthesis of Phosphanes Bearing 2‐Imino‐1,3‐thiazolidine Ligands – X‐Ray Analyses and NMR Spectroscopy

Pseudo‐ephedrine derived 2‐imino‐1,3‐thiazolidine 1 reacts with tris(diethylamino)phosphane by stepwise replacement of the diethylamino group to give the mono‐, bis‐ and tris(imino)phosphanes 2 , 3 and 4 , respectively, of which 4 could be isolated in pure state. The analogous reaction with diethylamino‐diphenylphosphane affords the imino‐diphenylphosphane 5 . The iminophosphanes react with sulfur or selenium to give the corresponding phosphorus(V) compounds. In contrast, the reaction of the iminophosphanes with oxygen is very slow; anhydrous trimethylamine N‐oxide reacts in the melt with the phosphanes to give the oxides 4(O) and 5(O) . The molecular structures of 4(O) (in mixture with 4 ), 4(Se) , 5(S) and 5(Se) were determined by X‐ray analysis. In all cases the ring‐sulfur and the phosphorus atoms are in cis‐positions at the C=N bonds. The analogous solution structures were determined by ¹H, ¹³C, ¹⁵N, ³¹P and ⁷⁷Se NMR spectroscopy. In the case of the compounds 5 , 5(O) , 5(S) and 5(Se) the isotope‐induced chemical shifts ¹δ^14/15N(³¹P) were determined, using INEPT‐HEED experiments.     

Energetic Hydrazine‐Based Salts with Nitrogen‐Rich and Oxidizing Anions

1,1,1‐Trimethylhydrazinium iodide ([(CH₃)₃N? NH₂]I, 1 ) was reacted with a silver salt to form the corresponding nitrate ([(CH₃)₃N? NH₂][NO₃], 2 ), perchlorate ([(CH₃)₃N? NH₂][ClO₄], 3 ), azide ([(CH₃)₃N? NH₂][N₃], 4 ), 5‐amino‐1H‐tetrazolate ([(CH₃)₃N? NH₂][H₂N? CN₄], 5 ), and sulfate ([(CH₃)₃N? NH₂]₂[SO₄]?2H₂O, 6 ?2H₂O) salts. The metathesis reaction of compound 6 ?2H₂O with barium salts led to the formation of the corresponding picrate ([(CH₃)₃N? NH₂][(NO₂)₃Ph ‐ O], 7 ), dinitramide ([(CH₃)₃N? NH₂][N(NO₂)₂], 8 ), 5‐nitrotetrazolate ([(CH₃)₃N? NH₂][O₂N? CN₄], 9 ), and nitroformiate ([(CH₃)₃N? NH₂][C(NO₂)₃], 10 ) salts. Compounds 1 – 10 were characterized by elemental analysis, mass spectrometry, infrared/Raman spectroscopy, and multinuclear NMR spectroscopy (¹H, ¹³C, and ¹⁵N). Additionally, compounds 1 , 6 , and 7 were also characterized by low‐temperature X‐ray diffraction techniques (XRD). Ba(NH₄)(NT)₃ (NT=5‐nitrotetrazole anion) was accidentally obtained during the synthesis of the 5‐nitrotetrazole salt 9 and was also characterized by low‐temperature XRD. Furthermore, the structure of the [(CH₃)₃N? NH₂]⁺ cation was optimized using the B3LYP method and used to calculate its vibrational frequencies, NBO charges, and electronic energy. Differential scanning calorimetry (DSC) was used to assess the thermal stabilities of salts 2 – 5 and 7 – 10 , and the sensitivities of the materials towards classical stimuli were estimated by submitting the compounds to standard (BAM) tests. Lastly, we computed the performance parameters (detonation pressures/velocities and specific impulses) and the decomposition gases of compounds 2 – 5 and 7 – 10 and those of their oxygen‐balanced mixtures with an oxidizer.     

Nitration Products of 5‐Amino‐1H‐tetrazole and Methyl‐5‐amino‐1H‐tetrazoles – Structures and Properties of Promising Energetic Materials

The nitration of 5‐amino‐1H‐tetrazole ( 1 ), 5‐amino‐1‐methyl‐1H‐tetrazole ( 3 ), and 5‐amino‐2‐methyl‐2H‐tetrazole ( 4 ) with HNO₃ (100%) was undertaken, and the corresponding products 5‐(nitrimino)‐1H‐tetrazole ( 2 ), 1‐methyl‐5‐(nitrimino)‐1H‐tetrazole ( 5 ), and 2‐methyl‐5‐(nitramino)‐2H‐tetrazole ( 6 ) were characterized comprehensively using vibrational (IR and Raman) spectroscopy, multinuclear (¹H, ¹³C, ¹⁴N, and ¹⁵N) NMR spectroscopy, mass spectrometry, and elemental analysis. The molecular structures in the crystalline state were determined by single‐crystal X‐ray diffraction. The thermodynamic properties and thermal behavior were investigated by using differential scanning calorimetry (DSC), and the heats of formation were determined by bomb calorimetric measurements. Compounds 2, 5 , and 6 were all found to be endothermic compounds. The thermal decompositions were investigated by gas‐phase IR spectroscopy as well as DSC experiments. The heats of explosion, the detonation pressures, and velocities were calculated with the software EXPLO5, whereby the calculated values are similar to those of common explosives such as TNT and RDX. In addition, the sensitivities were tested by BAM methods (drophammer and friction) and correlated to the calculated electrostatic potentials. The explosion performance of 5 was investigated by Koenen steel sleeve test, whereby a higher explosion power compared to RDX was reached. Finally, the long‐term stabilities at higher temperatures were tested by thermal safety calorimetry (FlexyTSC). X‐Ray crystallography of monoclinic 2 and 6 , and orthorhombic 5 was performed.     

Synthesis and Characterization of 3,4,5‐Triamino‐1,2,4‐triazolium and 1‐Methyl‐3,4,5‐triamino‐1,2,4‐triazolium Iodides

3,4,5‐Triamino‐1,2,4‐triazolium iodide ( 1 ) was obtained in good yield and purity and characterized using vibrational (IR, Raman) and multinuclear NMR spectroscopy (¹H, ¹³C, ¹⁵N), EA, MS, DSC, and X‐ray crystallography. The compound was synthesized by two different methods rendering two different polymorphs (α and β) as proved by X‐ray measurements, vibrational spectroscopy and DSC. 1‐Methyl‐3,4,5‐triamino‐1,2,4‐triazolium iodide ( 2 ) was synthesized by reaction of guanazine with methyliodide and fully characterized by the same techniques mentioned above. Both compounds showed to be suitable starting materials for the synthesis of guanazinium salts of energetic interest.     

1,5‐Diamino‐4‐methyltetrazolium 5‐Nitrotetrazolate – Synthesis,Testing and Scale‐up

1,5‐Diamino‐4‐methyltetrazolium 5‐nitrotetrazolate ( 2b ) was synthesized in high yield from 1,5‐diamino‐4‐methyltetrazolium iodide ( 2a ) and highly sensitive silver 5‐nitrotetrazolate (AgNT). A safer synthesis, suitable for scale‐up, is introduced involving reaction of the previously unreported 1‐amino‐5‐imino‐4‐methyltetrazole free base ( 2 ) with ammonium 5‐nitrotetrazolate. Both new compounds ( 2 and 2b ) were fully characterized using vibrational (IR and Raman) and multinuclear NMR spectroscopy (¹H, ¹³C, ¹⁴N, ¹⁵N), elemental analysis and single crystal X‐ray diffraction. The hydrogen‐bonding networks of both materials are described in terms of their graph‐sets. Compound 2b is hydrolytically stable with a high melting point and concomitant decomposition at 160 °C. The sensitivity of the energetic salt 2b towards impact (>30 J) and friction (>360 N) was tested. The constant volume energy of combustion (Δ_cU) of 2b was measured experimentally using bomb calorimetry. In addition, the detonation parameters (detonation pressure and velocity) of the nitrotetrazolate salt were calculated from the energy of formation, the crystal density and the molecular formula using the EXPLO5 computer code (P = 15.5·GPa, D = 6749 m s^?1) and are similar to that of TNT and nitroguanidine making 2b of prospective interest in propellant charge formulations or, in combination with a suitable oxidizer, as a solid propellant.     

Energetic Salts Based on Monoanions of N,N‐Bis(1H‐tetrazol‐5‐yl)amine and 5,5′‐Bis(tetrazole)

High‐density energetic salts that contain nitrogen‐rich cations and the 5‐(tetrazol‐5‐ylamino)tetrazolate (HBTA^?) or the 5‐(tetrazol‐5‐yl)tetrazolate (HBT^?) anion were readily synthesized by the metathesis reactions of sulfate salts with barium compounds, such as bis[5‐(tetrazol‐5‐ylamino)tetrazolate] (Ba(HBTA)₂), barium iminobis(5‐tetrazolate) (BaBTA), or barium 5,5′‐bis(tetrazolate) (BaBT) in aqueous solution. All salts were fully characterized by IR spectroscopy, multinuclear (¹H, ¹³C, ¹⁵N) NMR spectroscopy, elemental analyses, density, differential scanning calorimetry (DSC), and impact sensitivity. Ba(HBTA)₂ ? 4 H₂O crystallizes in the triclinic space group P$\bar 1$ , as determined by single‐crystal X‐ray diffraction, with a density of 2.177 g cm^?3. The densities of the other organic energetic salts range between 1.55 and 1.75 g cm^?3 as measured by a gas pycnometer. The detonation pressure (P) values calculated for these salts range from 19.4 to 33.6 GPa, and the detonation velocities (ν_D) range from 7677 to 9487 m s^?1, which make them competitive energetic materials. Solid‐state ¹³C NMR spectroscopy was used as an effective technique to determine the structure of the products that were obtained from the metathesis reactions of biguanidinium sulfate with barium iminobis(5‐tetrazolate) (BaBTA). Thus, the structure was determined as an HBTA salt by the comparison of its solid‐state ¹³C NMR spectroscopy with those of ammonium 5‐(tetrazol‐5‐ylamino)tetrazolate (AHBTA) and diammonium iminobis(5‐tetrazolate) (A₂BTA).     

Synthesis and Comprehensive Characterization of Hydrated Alkaline Earth Metal Salts of 5‐Amino‐1H‐tetrazole

Hydrated alkaline earth metal salts of 5‐amino‐1H‐tetrazole ( B ) were synthesized by reaction of B with a suitable metal hydroxide in water. All compounds were fully characterized by analytical (elemental analysis and mass spectrometry) and spectroscopic (IR, Raman, ¹H and ¹³C NMR) methods. Additionally, the crystal structures of the magnesium [ 1· 4H₂O: triclinic, P$\bar {1}$ , a = 5.940(1) Å, b = 7.326(1) Å,c = 7.383(1) Å, α = 106.10(1)°, β = 106.51(1)°, γ = 111.85(1)°, V = 258.0(1) ų], calcium [ 2· 6H₂O: monoclinic, P2₁/m, a = 6.904(1) Å,b = 6.828(1) Å, c = 10.952(2) Å, β = 94.50(2)°, V = 514.6(1) ų], and strontium [ 3· 6H₂O: orthorhombic, Cmcm, a = 6.987(1) Å, b = 28.394(2) Å, c = 7.007(1) Å, V = 1390.3(2) ų] were determined by low temperature X‐ray diffraction. Additionally, the (gas phase) structure of the 5‐amino‐1H‐tetrazole anion ([ B ]^–) was also studied by natural bond orbital (NBO) analysis [B3LYP/6‐31+G(d,p)]. Lastly, standard tests were used to determine the sensitivity towards impact, friction, and electrostatic discharge of the compounds and the thermal stability was assessed by differential scanning calorimetry (DSC) analysis.     

Energetic Materials Based on the 5‐Azido‐3‐nitro‐1, 2,4‐tri­azolate Anion

This study presents the preparation of 5‐azido‐3‐nitro‐1H‐1, 2,4‐triazole ( 1 ) in both good yield and high purity, starting from commercially available chemicals in a three step synthesis. Furthermore, several metal and nitrogen‐rich salts with sodium ( 3 ), potassium ( 4 ), cesium ( 5 ), silver ( 6 ), lead ( 7 ), ammonium ( 8 ), guanidinium ( 9 ), and aminoguanidinium ( 10 ) were prepared by simple acid‐base reactions. All compounds were well characterized by various means, including vibrational (IR, Raman) and multinuclear (¹H, ¹³C, ¹⁴N, ¹⁵N) NMR spectroscopy, mass spectrometry, and DSC. Additionally the structure of 7 was determined by single‐crystal X‐ray diffraction. The sensitivities towards various outer stimuli (impact, friction, electrostatic discharge) were determined according to BAM standards. The metal salts were tested as potential primary explosives utilizing various preliminary tests.     

The Chemistry of 5‐(Tetrazol‐1‐yl)‐2H‐tetrazole: An Extensive Study of Structural and Energetic Properties

5‐(Tetrazol‐1‐yl)‐2H‐tetrazole ( 1 ), or 1,5′‐bistetrazole, was synthesized by the cyclization of 5‐amino‐1H‐tetrazole, sodium azide and triethyl orthoformate in glacial acetic acid. A derivative of 1 , 2‐methyl‐5‐(tetrazol‐1‐yl)tetrazole ( 2 ) can be obtained by this method starting from 5‐amino‐2‐methyl‐tetrazole. Furthermore, selected salts of 1 with nitrogen‐rich and metal (alkali and transition metal) cations, including hydroxylammonium ( 4 ), triaminoguanidinium ( 5 ), copper(I) ( 8 ) and silver ( 9 ), as well as copper(II) complexes of both 1 and 2 were prepared. An intensive characterization of the compounds is given, including vibrational (IR, Raman) and multinuclear NMR spectroscopy, mass spectrometry, DSC and single‐crystal X‐ray diffraction. Their sensitivities towards physical stimuli (impact, friction, electrostatic) were determined according to Bundesamt für Materialforschung (BAM) standard methods. Energetic performance (detonation velocity, pressure, etc.) parameters were calculated with the EXPLO5 program, based on predicted heats of formation derived from enthalpies computed at the CBS‐4M level of theory and utilizing the atomization energy method. From the analytical and calculated data, their potential as energetic materials in different applications was evaluated and discussed.     

A Study of 5‐(1,2,4‐Triazol‐C‐yl)tetrazol‐1‐ols: Combining the Benefits of Different Heterocycles for the Design of Energetic Materials

The synthesis and full structural and spectroscopic characterization of three 5‐(1,2,4‐triazol‐C‐yl)tetrazol‐1‐ol compounds with selected energetic moieties including nitrimino ( 5 ), nitro ( 6 ) and azido ( 7 ) groups are reported. The influence of those energetic moieties as well as the C? C connection of a tetrazol‐1‐ol and a 1,2,4‐triazole on structural and energetic properties has been investigated. All compounds were well characterized by various means, including IR and multinuclear NMR spectroscopy, mass spectrometry, and DSC. The molecular structures of 5 – 8 were determined in the solid state by single‐crystal X‐ray diffraction. The standard heats of formation were calculated on the CBS‐4M level of theory utilizing the atomization energy method, revealing highly positive values for all compounds. The detonation parameters were calculated with the EXPLO5 program and compared to the common secondary explosive RDX. Additionally, sensitivities towards impact, friction and electrostatic discharge were determined.     

Mono‐ and Perfluoroaryliodine(III) Cyano Compounds – Synthesis,Reactivity, and Structure

C₆F₅I(CN)₂ and x‐FC₆H₄I(CN)₂ (x = 2, 3, 4) were isolated from reactions of the corresponding aryliodine difluorides ArIF₂ and a stoichiometric excess of Me₃SiCN in CCl₃F (0 °C) or CH₂Cl₂ (20 °C), respectively. In addition, x‐FC₆H₄I(CN)₂ compounds were synthesized in good yields on alternative routes, namely from 3‐ or 4‐FC₆H₄I(OC(O)CH₃)₂ or 4‐FC₆H₄I(OC(O)CF₃)₂ or from 4‐FC₆H₄IO and Me₃SiCN in CH₂Cl₂ at 20 °C. In the 1 : 1 reaction of C₆F₅IF₂ and Me₃SiCN a lower temperature was necessary to suppress partial disubstitution and to obtain the first example of a new type of aryliodine(III) cyanide compounds, C₆F₅I(CN)F. 4‐FC₆H₄I(CN)F could be isolated from the equimolar reaction of 4‐FC₆H₄IF₂ and Me₃SiCN in CH₂Cl₂ even at 20 °C. The new products were characterized by multi‐NMR and Raman spectroscopy. The molecular structures of C₆F₅I(CN)₂, 3‐ and 4‐FC₆H₄I(CN)₂, C₆F₅I(CN)F, and 4‐FC₆H₄I(CN)F are discussed and compared with that of C₆F₅IF₂. The reactivity of C₆F₅I(CN)F towards fluoride acceptors EF_n (BF₃, AsF₅) and R_xEX_?x (C₆F₅SiF₃, C₆H₅SiF₃, C₆H₅PF₄, Me₃SiCl, Me₃SiC₆F₅) were investigated and showed differing reaction patterns (fluoride abstraction, aryl transfer, chloride transfer). Besides the molecular entities C₆F₅I(CN)F and C₆F₅I(CN)Cl, the corresponding iodonium salts [C₆F₅(CN)I][BF₄] and [C₆F₅(CN)I][AsF₆] were isolated. The thermal stability of ArI(CN)₂ and ArI(CN)F, neat and in solution, as well as the reactivity of 4‐FC₆H₄I(CN)₂ towards the Lewis acid BF₃ are reported.     

Energetic Materials with Promising Properties: Synthesis and Characterization of 4,4′‐Bis(5‐nitro‐1,2,3‐2H‐triazole) Derivatives

Using a variety of functionalization strategies, derivatives of 4, 4′‐bis(5‐nitro‐1,2,3‐2H‐triazole) were designed, synthesized, and characterized. The isomers were separated, their structures were confirmed with single‐crystal X‐ray analysis, and their properties were determined by differential scanning calorimetry, density, impact sensitivity, heat of formation, and detonation velocity and pressure (calculated by EXPLO5 V6.01). Those materials were found to exhibit superior detonation performance when compared with the other fully carbon‐nitrated bis(azoles).     

Synthesis,Characterization and Crystal Structure of 4‐Amino‐1,2,4‐Δ2‐triazoline‐5‐thione and its Silver(I) Complex

The reaction of 4‐amino‐1,2,4‐Δ²‐triazoline‐5‐thione (ATT, 1 ) with AgNO₃ in methanol led to the complex [Ag(ATT)₂]NO₃ ( 2 ). 2 was characterized by elemental analyses, ¹H NMR, IR, and Raman spectroscopy as well as single‐crystal X‐ray diffraction. The molecular structure of 1 was also determined by single crystal X‐ray analysis. Crystal data for 1 at ?80 C: space group C2/c with a = 2107.4(2), b = 1425.1(1), c = 688.4(1) pm, β = 104.55(1)°, Z = 16, R₁ = 0.0514, crystal data for 2 at ?80 °C: space group P2₁/c with a = 675.7(1), b = 1321.1(1), c = 1311.2(1) pm, β = 90.03(1)°, Z = 4, R₁ = 0.0437.     

NMR Spectroscopic Characterization of Isocyano‐ and 1, 1′‐Diisocyanoferrocene. The Molecular Structure of Isocyanoferrocene

Isocyanoferrocene ( 1 ) and 1, 1′‐diisocyanoferrocene ( 2 ) were prepared and studied by ¹H, ¹³C, ¹⁴N and ⁵⁷Fe NMR spectroscopy in order to gain a more complete data set. The NMR data of 1 (chemical shifts and coupling constants) were calculated by DFT methods [B3LYP/6‐311+G(d, p)] and compare favourably with experimental data. The molecular structure of 1 was determined by X‐ray structural analysis, and an almost undistorted ferrocene‐like geometry was found.     

Synthesis and Characterization of 5‐(1,2,4‐Triazol‐3‐yl)tetrazoles with Various Energetic Functionalities

In this contribution the synthesis and full structural as well as spectroscopic characterization of three 5‐(1,2,4‐triazol‐3‐yl)tetrazoles along with selected energetic moieties like nitro, nitrimino, and azido groups are presented. The main goal is a comparative study on the influence of those variable energetic moieties on structural and energetic properties. A complete characterization including IR and Raman as well as multinuclear NMR spectroscopy of all compounds is presented. Additionally, X‐ray crystallographic measurements were performed and reveal insights into structural characteristics as well as inter‐ and intramolecular interactions. The standard enthalpies of formation were calculated for all compounds at the CBS‐4M level of theory and reveal high positive heats of formation for all compounds. The calculated detonation parameters (using the EXPLO5.05 program) are in the range of 8000 m s^?1 (8097 m s^?1 ( 5 ), 8020 m s^?1 ( 6 ), 7874 m s^?1 ( 7 )). As expected, the measured impact and friction sensitivities as well as decomposition temperatures strongly depend on the energetic moiety at the triazole ring. The C? C connection of a triazole ring with its opportunity to introduce a large variety of energetic moieties and a tetrazole ring, implying a large energy content, leads to the selective synthesis of primary and secondary explosives.     

Hydroaluminierung: Synthese,Struktur und Eigenschaften von 1‐Methyl‐cis‐1‐azonia‐5‐alabicyclo[3.3.0]octan und des Alan‐triallylamin‐Adduktes

Hydro‐Alumination: Synthesis, Structure, and Properties of 1‐Methyl‐ cis ‐1‐azonia‐5‐alabicyclo[3.3.0]octane and of the Alan‐triallylamine Adduct The alan‐N‐methyl‐diallylamine adduct ( I ) was obtained by the reaction of N,N‐diallyl‐methyl‐ammoniumchloride with LiAlH₄. Subsequently the reaction product was transformed by intramolecular hydro‐alumination reaction into bis(1‐methyl‐cis‐1‐azonia‐5‐alabicyclo[3.3.0]octane) ( II ). In contrast to I , the bis(alan‐triallylamine) adduct ( III ) does not undergo an analogous hydro‐alumination reaction. The compounds I , II and III were characterized by MS, IR, ¹H‐, ¹³C‐ and ²⁷Al‐NMR spectroscopy, and the X‐ray structures of II and III are reported and discussed.