Study on the thermal degradation behavior and flame‐retardant property of polylactide/PEDPP blends

A phosphorus‐containing polyester, poly (ethylene diglycol phenylphosphinate) (PEDPP) was synthesized from phenylphosphonic dichloride and ethylene diglycol. The structure of PEDPP has been determined by Fourier transform infrared (FTIR) spectroscopy, ¹H nuclear magnetic resonance and matrix assisted laser desorption ionization‐time of flight‐mass spectrometer. A series of polylactide (PLA) blends with various content of PEDPP as flame retardant was prepared by direct melt compounding; the PLA/PEDPP blend is partially miscible. PEDPP is an effective flame retardant for PLA. The limiting oxygen index values increased from 19.7% for pure PLA to 29.0% for the blend containing 10wt% PEDPP. Thermogravimetric analysis‐FTIR analysis indicated that the PEDPP affected the pyrolytic decomposition process of PLA, which is established by the change of the pyrolytic decomposition rate and the gross mass of gaseous fuel formation. The pyrolytic decomposition activation energies of PLA and PLA/10%PEDPP were estimated via Flynn–Wall–Ozawa method. Copyright © 2013 John Wiley & Sons, Ltd.     

An investigation of the thermal and thermo‐oxidative degradation of polybenzoxazines with a reactive functional group

The thermal behavior of a series of polybenzoxazines based on 3‐aminophenylacetylene has been investigated. The effect of reactive amine on the thermal cleavage of the Mannich base is examined under both inert and oxidative environments. It has been shown that the thermal stability of polybenzoxazines is substantially improved by the reactive amine. Various biphenols are found to have insignificant effect on the thermal stability of this series of polybenzoxazines. These nitrogen containing phenolic resins are nonflammable polymers. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 647–659, 1999     

Thermal degradation mechanism of poly(arylene sulfone)s by stepwise Py‐GC/MS

The thermal degradation of poly(ether sulfone) (PES) and polysulfone (PSF) was studied with a combination of thermogravimetric analysis and stepwise pyrolysis–gas chromatography/mass spectrometry techniques with consecutive heating of the samples at fixed temperature intervals (100 °C) to achieve narrow‐temperature pyrolysis conditions. The individual mass chromatograms of various pyrolysates were correlated with pyrolysis temperatures to elucidate the pyrolysis mechanism. The major mechanism for both PES and PSF was a one‐stage pyrolysis involving main‐chain random scission and carbonization. The major products SO₂ and phenol were released from the sulfone and ether groups in PES. The major products SO₂, phenol, and 1‐methyl‐4‐phenoxybenzene were released from the sulfone, ether, and isopropylene groups in PSF. In the PES, the thermal stability of the sulfone and ether groups was identical to the maximum thermogravimetric loss rate. In the PSF, the thermal stability was in the following order: sulfone < ether < isopropylene. The temperature of the maximum thermogravimetric loss rate was similar to the maximum evolution of phenol. However, there was a considerable difference in the thermal behavior of both polymers; the correlation of the polymer structure to the degradation mechanism is discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 583–593, 2000     

Development of novel flame‐retardant thermosets based on benzoxazine–phenolic resins and a glycidyl phosphinate

Modified novolac resins with benzoxazine rings were prepared and copolymerized with a glycidyl phosphinate. Their curing behavior and the thermal properties of the curing resins were studied. Copolymerization was studied with model compounds considering the functionality of the benzoxazine‐based phenolic resins and the easy isomerization of the glycidyl phosphinate. Phenolic novolac resin acts as an initiator but p‐toluensulfonic acid had to be used to decrease the curing temperature and to prevent glycidyl phosphinate from isomerizing. The materials obtained exhibited high glass‐transition temperatures and retardation on thermal degradation rates. V‐0 materials were obtained when the materials were tested for ignition resistance with the UL‐94 test. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 279–289, 2004     

Thermally stable and flame‐retardant aromatic phosphate and cyclotriphosphazene‐containing polyurethanes: synthesis and properties

A novel flame retardant (4‐diphenylphosphoryloxyphenoxy)(4‐hydroxyphenoxy)cyclotriphosphazene (PPPZ) was prepared and characterized by FT‐IR, ³¹P‐NMR and ¹H‐NMR spectroscopy. Polyurethanes that contained aromatic phosphate groups attached to cyclotriphosphazene, with various phosphorus contents, were prepared from PPPZ, poly(propylene glycol), 1,4‐butanediol, and 2,4‐toluene diisocyanate by one‐step polymerization. The polymers prepared were characterized by FT‐IR, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and oxygen index (LOI) measurements. The effect of the concentration of PPPZ on the thermal behavior of the polyurethane was studied. The results indicated that the glass transition temperature (T_g) of the polyurethane increased with the concentration of PPPZ. The PPPZ‐containing polyurethanes exhibited slightly higher temperatures of degradation and higher char yields than PPPZ‐free polyurethanes. Moreover, the LOI of the polyurethanes increased with increasing PPPZ content. Also studied was the possible mechanism of the flame retardancy. Copyright © 2005 John Wiley & Sons, Ltd.     

Facile,one‐pot synthesis of aromatic diamine‐based phosphinated benzoxazines and their flame‐retardant thermosets

Three aromatic diamine‐based, phosphinated benzoxazines ( 7–9 ) were prepared from three typical aromatic diamines—4,4′‐diamino diphenyl methane ( 1 ), 4,4′‐diamino diphenyl sulfone ( 2 ), and 4,4′‐diamino diphenyl ether ( 3 ) by a one‐pot procedure. To clarify the reaction mechanism, a two‐pot procedure was applied, in which the reaction intermediates ( 4–6 ) were isolated for characterization. The structures of intermediates and benzoxazines were confirmed by high resolution mass, IR, and 1D and 2D‐NMR spectra. In addition to self‐polymerization, ( 7–9 ) were copolymerized with cresol novolac epoxy (CNE). After curing, the homopolymers of P( 7–9 ) are brittle while the copolymers of ( 7–9 )/CNE are tough. Dynamic mechanical analysis shows the T_gs of ( 7–9 )/CNE copolymers are 187, 190, and 171 °C, respectively. Thermal mechanical analysis shows the CTEs of ( 7–9 )/CNE copolymers are 46, 38, and 46 ppm, respectively. All the ( 7–9 )/CNE copolymers belong to an UL‐94 V‐0 grade, demonstrating good flame retardancy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synergistic effect of cocondensed nanosilica in intumescent flame‐retardant polypropylene

Amino‐functionalized nanosilica (SiO₂‐NH₂) was prepared through cocondensation method using aminopropyltriethoxysilane as comonomer to hydrolyze and cocondense with tetraethylorthosilicate. The synergistic effect of combination of ammonium polyphosphate and pentaerythritol with SiO₂‐NH₂ on the thermal and flame‐retardant properties of intumescent flame‐retardant (IFR) polypropylene (PP) has been investigated by thermogravimetric analysis (TGA), scanning electron microscopy, Raman spectra, X‐ray diffraction (XRD), limiting oxygen index (LOI), and UL 94 tests. When 1.0 wt.% SiO₂‐NH₂ was added, the LOI value of the PP/IFR composite with 25 wt.% of IFR increased from 26.6% to 31.7%, while the UL 94 rating raised from not classified to V‐0. The TGA data demonstrated that the SiO₂‐NH₂ nanoparticles increased the charred residue of the PP/IFR composites. The morphological structures and the orderliness of the charred residue proved that SiO₂‐NH₂ promoted the formation of compact intumescent charred layer, which effectively protected the underlying polymer from burning. The XRD patterns of the charred residue indicated that nanosilica reacted with APP to form SiP₂O₇ crystal structure during combustion, which was beneficial to the formation of compact charred layers. In comparison with the inorganic SiO₂‐cal nanoparticles, the amino‐functionalized nanosilica revealed much more efficient synergistic flame‐retardant effect due to the difference of surface properties.     

Development of novel flame‐retardant thermosets based on boron‐modified phenol–formaldehyde resins

Boron‐containing novolac resins were prepared through the modification of a commercial novolac resin with different contents of bis(benzo‐1,3,2‐dioxaborolanyl) oxide. Their thermal and flame‐retardant properties were measured. Then, they were crosslinked with hexamethylenetetramine, and their thermal, thermodynamomechanical, and flame‐retardant properties were evaluated. Their modification degree was related to the segmental motion of the materials. The crosslinking of the boron‐modified novolac resins with hexamethylenetetramine was slower and not as extensive as that of commercial novolac resins because the nitrogen from intermediate species coordinated with boron. The thermal degradation of the boron‐containing novolac resins generated boric acid at high temperatures and gave an intumescent char that slowed the degradation and prevented it from being complete. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3503–3512, 2006     

Joint‐aggregation intumescent flame‐retardant effect of ammonium polyphosphate and charring agent in polypropylene

In order to explore the structure mode of intumescent flame retardants (IFRs) with higher efficiency, IFR particles with joint‐aggregation structure (@IFR) were obtained through the treatment of ammonium polyphosphate (APP) and a charring agent (PT‐Cluster) in their aqueous solution. Then, the joint‐aggregation IFR effect was researched using its application in polypropylene. In case of 20 wt% IFR loading, the limiting oxygen index (LOI) value of @IFR/PP was 1.1% higher than that of 15APP/5PT‐Cluster/PP mixture, and a 1.6 mm‐thick @IFR/PP composite passed the UL 94 V‐2 rating test, while 15APP/5PT‐Cluster/PP demonstrated no flame‐retardant rating in UL 94 vertical burning tests. In a cone calorimeter test, @IFR also had a better inhibition effect on heat release. The average heat release rate (av‐HRR) value during 0 to 120 seconds of @IFR/PP was only 41 kW m^?2, which was 33.9% lower than that of the 15APP/5PT‐Cluster/PP. Furthermore, the peak heat release rate (pk‐HRR) of @IFR/PP was 20.5% lower than that of 15APP/5PT‐Cluster/PP, and the time to pk‐HRR of @IFR/PP was 710 seconds, while that of 15APP/5PT‐Cluster/PP was 580 seconds. The better inhibition effect on HRR and the delay of time to pk‐HRR were caused by the joint‐aggregated structure of @IFR, which can rapidly react to form stable and efficient char layers. This kind of join‐aggregation IFR effect has great significance in suppressing the spread of fire in reality. In addition, @IFR also increased the mechanical properties of PP composites slightly compared with the APP/PT‐Cluster mixture.     

The synergistic flame‐retardant effect of O‐MMT on the intumescent flame‐retardant PP/CA/APP systems

The flame retardancy of a novel intumescent flame‐retardant polypropylene (IFR‐PP) system, which was composed of a charring agent (CA), ammonium polyphosphate (APP), and polypropylene (PP), could be enhanced significantly by adding a small amount (1.0 wt%) of an organic montmorillonite (O‐MMT). The synergistic flame‐retardant effect was studied systematically. The thermal stability and combustion behavior of the flame‐retarded PP were also investigated by thermogravimetric analysis (TGA), limiting oxygen index (LOI), vertical burning test (UL‐94), scanning electronic microscopy (SEM), and cone calorimeter test (CCT). TGA results demonstrated that the onset decomposition temperatures of IFR‐PP samples, with or without O‐MMT, were higher than that of neat PP. Compared with IFR‐PP, the LOI value of IFR‐PP containing 1.0 wt% O‐MMT was increased from 30.8 to 33.0, and the UL‐94 rating was also enhanced to V‐0 from V‐1 when the total loading of flame retardant was the same. The cone calorimeter results showed that the IFR‐PP with 1.0 wt% of O‐MMT had the lowest heat release rate (HRR), total heat release (THR), total smoke production (TSP), CO production (COP), CO₂ production (CO₂P), and mass loss (ML) of all the studied IFR‐PP samples, with or without O‐MMT. All these results indicated that O‐MMT had a significantly synergistic effect on the flame‐retardancy of IFR‐PP at a low content of O‐MMT. Copyright © 2009 John Wiley & Sons, Ltd.     

A new intumescent flame‐retardant: preparation,surface modification,and its application in polypropylene

Melamine salt of tripentaerythriol phosphate (MTP), as a new intumescent flame‐retardant, was prepared from tripentaerythritol (TPE), polyphosphoric acid, phosphoric pentoxide, and melamine, and then incorporated into polypropylene (PP) to obtain flame‐retarded PP‐MTP. FT‐IR analysis showed that MTP was in the form of cage structure. The flammability, combustion behavior, and thermal degradation and stability of flame‐retarded PP were characterized by using LOI, UL‐94 test, cone calorimetry, and TGA, respectively. By SEM, the char structure of PP‐MTP was analyzed. XRD diffraction tests showed that PP‐matrix of PP‐MTP presented better crystallized phases, when MTP was modified by methyl hydrogen siloxane. The relations of the dispersion of MTP in PP matrix to the compatibility between PP and MTP, and to the flame retardancy were discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Functionalized ZrP nanosheet with free‐radical quenching capability and its synergism in intumescent flame‐retardant polypropylene

The combination of catalyzing carbonization and free‐radical quenching mechanism is proposed to be a promising strategy for the preparation of high‐efficiency flame‐retardant polypropylene (PP). Herein, a novel functionalized zirconium phosphate (RQZrP) nanosheet with free‐radical quenching capability was fabricated by decorating macromolecular N‐alkoxy hindered amine (MNOR) onto the surface of ZrP. It was combined with an intumescent flame retardant (IFR) to flame‐retard PP. The results showed that there was a good synergism between RQZrP and IFR, which effectively improved the fire safety of PP. When the content of RQZrP was 2 wt% and IFR was 23 wt%, the limiting oxygen index (LOI) of PP increased from 19.0% to 33.0%, and it achieved a UL‐94 V‐0 rating. Meanwhile, the peak heat release rate (PHRR), total heat release (THR), carbon monoxide production (COP), and carbon dioxide production (CO₂P) were significantly decreased. It revealed that nitroxyl radicals generated by RQZrP could capture alkyl radicals and peroxy radicals that produced during the degradation and combustion of PP. Meanwhile, RQZrP acted as a solid acid that catalyzed PP chains rapidly cross‐linking to form char on its surface, and it also played as a supporting skeleton to enhance the strength and compactness of the char layer, thus effectively preventing the transmission of heat, oxygen, and combustible gases.     

Photocrosslinking and related properties of intumescent flame‐retardant LLDPE/EVA/IFR blends

The photoinitiated crosslinking of halogen‐free flame retarded linear low density polyethylene/poly(ethylene‐co‐vinyl acetate) blends (LLDPE/EVA) with the intumescent flame retardant (IFR) of phosphorous‐nitrogen compound (NP) in the presence of photoinitiator and crosslinker and their characterization of related properties have been investigated by gel determination, heat extension test, cone calorimeter test (CCT), thermogravimetric analysis (TGA), Fourier transfer infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), mechanical properties measurements, limiting oxygen index (LOI), UL‐94, and water resistance test. The data from the gel content and heat extension rate (HER) show that the LLDPE/EVA/IFR blends filled with NP are readily crosslinked to a gel content of above 75% and the HER values reach about 50% by UV‐irradiation of 5 sec under suitable amount of photoinitiator and crosslinker. The data obtained from the CCT and LOI indicate that photocrosslinking can considerably decrease the heat release rates (HRR) by 10–15%, prolongate the combustion time, and increase two LOI values for the LLDPE/EVA/NP blends UV irradiated for 5 sec. The results from TGA and the dynamic FTIR spectra give the evidence that the photocrosslinked LLDPE/EVA/NP samples show slower thermal degradation rate and higher thermo‐oxidative degradation temperature than the uncrosslinked LLDPE/EVA/NP samples. The morphological structures of charred residues observed by SEM give the positive evidence that the compact charred layers formed from the photocrosslinked LLDPE/EVA/NP samples play an important role in the enhancement of flame retardant and thermal properties. The data from the mechanical tests and water‐resistant measurements show that photocrosslinking can considerably improve the mechanical and water‐resistant properties of LLDPE/EVA/NP samples. Copyright © 2011 John Wiley & Sons, Ltd.     

Preparation of piperazine cyanurate by hydrogen‐bonding self‐assembly reaction and its application in intumescent flame‐retardant polypropylene composites

Piperazine cyanurate (PCA) is designed and synthesized via hydrogen‐bonding self‐assembly reactions between piperazine and cyanuric acid. Chemical structure and morphology of PCA are investigated by Fourier transform infrared spectroscopy and scanning electron microscopy, respectively. The prepared PCA is combined with ammonium polyphosphate (APP) to prepare flame‐retardant polypropylene (PP) composites. Thermostability, flammability, and combustion characteristics of PP composites are analyzed. The maximum thermal decomposition rate of flame‐retarded PP composites has an apparent reduction compared with that of pure PP, and obvious char is left for this intumescent flame retardant (IFR) system of APP and PCA. A high limiting oxygen index value and UL‐94 V‐0 rating are achieved with addition of APP and PCA. In cone calorimetry test, heat and smoke releases of PP are significantly decreased by this IFR system. Gaseous decomposition products during the thermal decomposition of flame‐retardant composites are studied. Chemical structure and morphology of char residues are analyzed. The results illustrate that APP and PCA have a superb synergistic action in the aspect of improvement in fire safety of PP. A possible flame‐retardant mechanism is concluded to reveal the synergism between APP and PCA.     

The synthesis and properties of a reactive flame‐retardant unsaturated polyester resin from a phosphorus‐containing diacid

A transparent flame‐retardant unsaturated polyester resin (FR‐UPR) was obtained by reacting propylene glycol (PG) with maleic anhydride (MA), phthalic anhydride (PA), and 9,10‐dihydro‐10[2,3‐di(hydroxy carbonyl)propyl]‐10‐phosphaphenanthrene‐10‐oxide (DDP) synthesized from 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐oxide (DOPO) and itaconic acid (ITA). The chemical structure of the resulting FR‐UPR was confirmed by FTIR, ¹H‐NMR and ³¹P‐NMR. The average molecular weight and viscosity of the FR‐UPR were determined by gel permeation chromatography (GPC) and viscometer, respectively. Thermal stability was studied by thermogravimetric analysis (TGA) both in air and nitrogen to determine the thermal decomposition mechanism, and the apparent activation energy (E_a) was calculated by both the Kissinger and Ozawa methods. Compared to unsaturated polyester resin (UPR), the higher E_a of FR‐UPR3 implied an improved thermal stability. According to variations of the limited oxygen index (LOI) values, the UL 94 rating of vertical burning test and scanning electron microscopy (SEM) photographs of char residues, the flame retardance of cured FR‐UPR was enhanced with increasing DDP content. The study of fire reaction tests, using a cone calorimeter, suggested that there was a significant reduction of flammability in the FR‐UPR. Copyright © 2010 John Wiley & Sons, Ltd.     

Flame retardant properties and mechanism of an efficient intumescent flame retardant PLA composites

The charring agent (CNCA‐DA) containing triazine and benzene rings was combined with ammonium polyphosphate (APP) to form intumescent flame retardant (IFR), and it was occupied to modify polylactide (PLA). The flame retardant properties and mechanism of flame retardant PLA composites were investigated by the limited oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis, microscale combustion calorimetry, scanning electron microscopy, laser Raman spectroscopy analysis and X‐ray photoelectron spectroscopy. The analysis from LOI and UL‐94 presented that the IFR was very effective in flame retardancy of PLA. When the weight ratio of APP to CNCA‐DA was 3:1, and the IFR loading was 30%, the IFR showed the best effect, and the LOI value reached 45.6%. It was found that when 20 wt% IFR was loaded, the flame retardancy of PLA/IFR still passed UL‐94 V‐0 rating, and its LOI value reached 32.8%. The microscale combustion calorimetry results showed that PLA/IFR had lower heat release rate, total heat release, and heat release capacity than other composites, and there was an obvious synergistic effect between APP and CNCA‐DA for PLA. IFR containing APP/CNCA‐DA had good thermal stability and char‐forming ability with the char residue 29.3% at 800°C under N₂ atmosphere. Scanning electron microscopy observation further indicated that IFR could promote forming continuous and compact intumescent char layer. The laser Raman spectroscopy analysis and X‐ray photoelectron spectroscopy analysis results indicated that an appropriate graphitization degree of the residue char was formed, and more O and N were remained to form more cross‐linking structure. Copyright © 2016 John Wiley & Sons, Ltd.     

Synergistic effect of nanoflaky manganese phosphate on thermal degradation and flame retardant properties of intumescent flame retardant polypropylene system

Nanoflaky manganese phosphate (NMP) was synthesized from manganese nitrate and trisodium phosphate dodecahydrate, and used as a synergistic agent on the flame retardancy of polypropylene (PP)/intumescent flame retardant (IFR) system. The thermogravimetric analysis (TGA), real time Fourier-transform infrared (RTFTIR) spectroscopy measurements, cone calorimeter (CONE) and microscale combustion calorimeter (MCC) were used to evaluate the synergistic effects of NMP on PP/IFR system. When IFR + NMP was fixed at 20 wt% in flame retardant PP system, the TGA tests showed that NMP could enhance the thermal stability of PP/IFR system at initial temperature from about room temperature to 440 °C and effectively increase the char residue formation. The RTFTIR results revealed that NMP could clearly change the decomposition behavior of PP in PP/IFR system, which promotes decomposition at the initial temperature from about room temperature to 260 °C and forms more effective barrier layer to protect PP from decomposing at high temperature from about 260 °C to 500 °C. The CONE tests indicated that the addition of NMP in PP/IFR system not only reduced the peak heat release rate (HRR), but also prolonged the ignition time. The MCC results revealed that PP/IFR/NMP system generated less combustion heat over the course of heating than that of PP/IFR system. And scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) were used to explore the char residues of the PP/IFR systems with and without NMP.     

Preparation and thermal properties of a novel core‐shell structure flame‐retardant copolymer

In order to improve the flame retardancy of polystyrene (PS), a phosphorus and nitrogen comonomer, named AC₂NP₂, was synthesized and then incorporated into various amounts of PS by seeded emulsion polymerization. The modified methacrylate (AC₂NP₂) was used as the core phase, the styrene as the shell phase, then flame‐retardant effect copolymers with core‐shell structure were prepared successfully. The particle size was ranged from 40 to 60 nm, and the structure and properties of the copolymers were characterized in detail. Notably, despite a few amounts of the AC₂NP₂ units in the copolymers, all the copolymers exhibited significantly enhanced thermal stability and reduced flammability as compared with pure PS. Furthermore, from differential scanning calorimetry test, it was observed that the glass transition temperature was tinily influenced with the incorporation of commoner. The incorporation of P‐N comonomer into PS backbone did not lead to negative effect on the glass transition behavior of PS.     

A novel intumescent flame retardant imparts high flame retardancy to epoxy resin

Intumescent flame retardant (IFR) has received the considerable attention ascribed to the inherent advantages including non‐halogen, low toxicity, low smoke release and environmentally friendly. In this work, a novel charring agent poly (piperazine phenylaminophosphamide) named as PPTA was successfully synthesized and characterized by Fourier transform infrared spectra (FTIR) and X‐ray photoelectron spectroscopy (XPS). Then, a series of flame‐retardant EP samples were prepared by blending with ammonium polyphosphate (APP) and PPTA. Combustion tests include oxygen Index (LOI), vertical Burning Test (UL‐94) and cone calorimeter testing,these test results showed that PPTA greatly enhances the flame retardancy of EP/APP. According to detailed results, EP containing 10 wt% APP had a LOI value of 30.2%,but had no enhancement on UL‐94 rating. However, after both 7.5 wt% APP and 2.5 wt% PPTA were added, EP‐7 passed UL‐94 V‐0 rating with a LOI value of 33.0%. Moreover, the peak heat release rate (PHRR) and peak of smoke product rate (PSPR) of EP‐7 were greatly decreased. Meanwhile, the flame‐retardant mechanism of EP‐7 was investigated by scanning electron microscopy (SEM), thermogravimetric analysis/infrared spectrometry (TG‐IR) and X‐ray photoelectron spectroscopy (XPS). The corresponding results presented PPTA significantly increased the density of char layer, resulting in the good flame retardancy.     

Studies on photocrosslinking and flame‐retardant properties of chalcone‐based polyacrylamides

A photocrosslinkable polycyclic chalcone‐based acrylamide has been synthesized by Claisen–Schmidt condensation reaction and then polymerized via free radical polymerization technique using azobisisobutyronitrile (AIBN) as an initiator. The resulting polymers have been characterized by FT‐IR, ¹H‐NMR and ¹³C‐NMR analytic techniques. The molecular weights of the polymers were determined by gel permeation chromatography. The thermal properties of synthesized polymers were characterized by TGA analysis, and the obtained results show good thermal and thermo‐oxidative stability which is required for a negative photo resist. The high flame‐retardant properties are calculated from limiting oxygen index (LOI) values and are found to be 36.9 and 32.0 for naphthyl and anthryl chalcone‐based polymers, respectively. The experimentally determined LOI values of polymers (PMNPA and PAPA) are 34.3 and 30.2, respectively, and the values are closer to theoretically found LOI values. However, the cone calorimetry of flame‐retardant PMNPA only showed a slight decrease in peak of heat release rate (PHRR) and total heat release (THR) compared to PAPA but the ignition time (TTI) of PMNPA is slightly higher than PAPA. The photocrosslinking properties of the polymers were investigated by UV spectroscopy technique and were found that with the increase in number of aromatic rings, the rate of crosslinking decreases. Thus polyacrylamides are useful in photolithography technology as well as flame‐retardant property in electrical appliances. Copyright © 2015 John Wiley & Sons, Ltd.