Synthesis,characterizations, and electrochromic properties of donor–acceptor type polymers containing 2, 1, 3‐benzothiadiazole and different thiophene donors

Three donor–acceptor type π‐conjugated monomers containing 2, 1, 3‐benzothiadiazole (Tz) as the acceptor unit and different thiophene derivatives (thiophene, 3,4‐ethylenedioxythiophene, and thieno[3,2‐b]thiophene) as the donor units have been synthesized via Stille coupling reaction. The corresponding polymers are electrochemically deposited onto FTO glass by cyclic voltammetry (CV). The maximum absorption wavelength of the neutral polymers varies with the electron‐rich character of incorporated thiophene moieties, giving rise to tunable colors. In addition, the prepared polymer films demonstrate reasonable transmittance modulation, fast switching rate, high color efficiency and good stability, which meet the requirements of smart windows and electrochromic display applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2239–2246     

Electrochemical and optical properties of novel donor‐acceptor thiophene‐perylene‐thiophene polymers

In this study, donor‐acceptor type thiophene‐perylene‐thiophene monomers were synthesized and polymerized by both oxidative polymerization using FeCl₃ as catalyst and the electrochemical process. UV–vis, FTIR, ¹H NMR, and elemental analysis techniques were used for structural characterization. Thermal behaviors of these compounds were determined by using TGA system. The highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energy levels and electrochemical and optical band gap values were calculated by using the results of cyclic voltammetry and UV–vis measurements, respectively. The number–average molecular weight (M_n), weight–average molecular weight (M_w), and polydispersity index (PDI) values of synthesized polymers were determined by size exclusion chromatography. Conductivity measurements of these polymers were carried out by electrometer by using a four‐point probe technique. The conductivity was observed to be increased by iodine doping. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1974–1989, 2008     

Blue to light gray electrochromic polymers from dodecyl‐derivatized thiophene Bis‐substituted dibenzothiophene/dibenzofuran

3‐Dodecylthiophene end‐capped two monomers: 2,8‐bis‐(4‐dodecyl‐thiophen‐2‐yl)‐dibenzothiophene (DBT‐3DTh) and 2,8‐bis‐(4‐dodecyl‐thiophen‐2‐yl)‐dibenzofuran (DBF‐3DTh) were synthesized via Stille coupling reaction. Both monomers exhibited emission peaks at about 400 nm with fluorescence quantum yields ranging from 0.16 to 0.21. The corresponding electroactive polymers poly(2,8‐bis‐(4‐dodecyl‐thiophen‐2‐yl)‐dibenzothiophene) (PDBT‐3DTh) and poly(2,8‐bis‐(4‐dodecyl‐thiophen‐2‐yl)‐dibenzofuran) (PDBF‐3DTh) were obtained by electropolymerization method and displayed good electrochemical stability. Both polymers switched between light gray in the neutral state and blue in the oxidized state. Kinetic investigations showed that PDBT‐3DTh exhibited a maximum optical contrast (ΔT %) of 25.23% at 575 nm with the coloration efficiency (CE) of 196 cm² C^?1. However, the electrochromic properties of PDBF‐3DTh were inferior to PDBT‐3DTh. Further detailed discussions with EDOT and 3‐alkylthiophenes end‐capped DBT/DBF hybrid electrochromic polymers were comparatively studied. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1468–1478     

Fused structures in the polymer backbone to investigate the photovoltaic and electrochromic properties of donor–acceptor‐type conjugated polymers

In this study, two new benzotriazole (BTz) and dithienothiophene (DTT) containing conjugated polymers were synthesized. After successful characterizations of the monomers by proton‐nuclear magnetic resonance (¹H NMR) and carbon‐NMR (¹³C NMR) techniques, poly(4‐(dithieno[3, 2‐b:2′,3′‐d]thiophen‐2‐yl)‐2‐(2‐octyldodecyl)‐2H‐benzo[d][1,2,3] triazole) P1 and poly(4‐(5‐(dithieno[3,2‐b:2′,3′‐d]thiophen‐2‐yl)thiophen‐2‐yl)‐2‐(2‐octyldodecyl)‐7‐(thiophen‐2‐yl)‐2H‐benzo[d][1,2,3]triazole) P2 were synthesized via a typical Stille coupling. Electrochemical and spectroelectrochemical studies showed that both polymers can be multipurpose materials and used in electrochromic and photovoltaic applications. Reported study indicated that incorporation of DTT into the structure leads to fast switching times compared with BTz‐based polymers and competent percentage transmittance in the near‐infrared region. Multichromism is important in the context of low‐cost flexible display device technology and both polymers are ambipolar and processable as well as multichromic. Throughout the preliminary photovoltaic studies, the best performances of photovoltaic devices were found as V_oc = 0.49 V, J_sc = 0.83 mA/cm², fill factor (FF) = 34.4%, and power conversion efficiency (PCE) = 0.14% for P1 , and as V_oc = 0.35 V, J_sc = 1.57 mA/cm², FF = 38.2%, and PCE = 0.21% for P2 . © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Spray‐processable thiazolothiazole‐based copolymers with altered donor groups and their electrochromic properties

Two novel thiazolo[5,4‐d]thiazole containing donor–acceptor type alternating copolymers, poly[2‐(5‐(2‐decyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)thiophen‐2‐yl)‐5‐(thiophen‐2‐yl)thiazolo[5,4‐d]thiazole] (BTzTh) and poly[2‐(5‐(2‐decyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)furan‐2‐yl)‐5‐(furan‐2‐yl)thiazolo[5,4‐d]thiazole] (BTzFr) were synthesized by Stille coupling polymerization and their electrochemical and electrochromic properties were explored. Electrochemical activities of the spray‐casted polymer films were determined by cyclic voltammetry. To evaluate the effect of thiophene and furan moieties on the optical properties of the copolymers, spectroelectrochemistry studies were performed. To examine the switching abilities, copolymer films were subjected to a double potential step chronoamperometry in their local maximum absorptions. Both thiazolothiazole‐containing copolymers showed multichromic properties with low band‐gap values 1.7 and 1.9 eV for BTzTh and BTzFr, respectively. The decent electrochromical properties together with solution processability make them important candidates for electrochromic applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3901–3906     

A Solution‐processible,n‐dopable polypyrrole derivative

In this study, soluble, n‐dopable, florescent, electrochromic polypyrrole derivative was synthesized through both chemical and electrochemical polymerization of 2‐[6‐(1H‐pyrrol‐1‐yl)hexyl]‐1H‐benzo[de]isoquinoline‐1,3(2H)‐dione (PyNI). The polymer synthesized through chemical polymerization had PL emission maxima at 471 and 543 nm and exhibited two redox couples at E_1/2,p = ?1.48 V and E_1/2,p = 1.12 V due to n‐type and p‐type doping, respectively. Electrochromic properties of electrochemically synthesized poly(PyNI) (PPyNI) were investigated via spectroelectrochemistry, kinetic studies, coloration efficiency, and colorimetry measurements. The optical band gap of PPyNI was calculated as 2.99 and 2.37 eV. Spectroelectrochemistry analysis of PPyNI reflected electronic transitions at 330–418 nm and 704 nm due to π–π* transition and charge carrier band formation, respectively. The polymer exhibited a switching time of 1.63 s and an optical contrast of 33.37%. Furthermore, dual‐type, complementary‐colored polymer electrochromic device in ITO/PPyNI/PEDOT/ITO configuration was assembled and characterized. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A new donor–acceptor double‐cable carbazole polymer with perylene bisimide pendant group: Synthesis,electrochemical, and photovoltaic properties

We report here electrochemical synthesis of novel soluble donor–acceptor (D–A) polymer with suitably functionalized perylenetetracarboxylic diimide dye derivative covalently linked to carbazole moiety (Cbz‐PDI). The band gap, E_g was measured using UV–Vis spectroscopy and compared with that obtained by cyclic voltammetry (CV). Efficient intramolecular electron transfer from carbazole‐donor to perynediimide‐acceptor leads to remarkable fluorescence quenching of the perylene core. Furthermore, spectroelectrochemical property and surface morphology of the polymer film were investigated. Characteristic monoanion and dianion radical bands on the UV–Vis absorption spectra attributed to the electrochemical reduction of the neutral polymer were observed. During the reduction process, red color of the film turned into blue and violet, respectively. Finally, the photovoltaic performance of the D–A double‐cable polymer was checked and nearly 0.1% electrical conversion efficiency is obtained under simulated AM 1.5 solar light with 100 mW/cm² radiation power. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6280–6291, 2009     

Synthesis and structure‐property relationship of new donor–acceptor‐type conjugated monomers and polymers on the basis of thiophene and benzothiadiazole

We have synthesized three new donor–acceptor‐type monomers to achieve soluble and processable low‐band gap polymers, 4,7‐bis(4‐octyl‐2‐thienyl)‐2,1,3‐benzothiadiazole (B4TB), 4,7‐bis(3‐octyl‐2‐thienyl)‐2,1,3‐benzothiadiazole (B3TB), and 4‐(3‐octyl‐2‐thienyl)‐7‐(4‐octyl‐2‐thienyl)‐2,1,3‐benzothiadiazole (B34TB), by the Suzuki coupling reaction. Using B4TB and B3TB, two soluble high molecular weight regioregular head‐to‐head and tail‐to‐tail polymers poly[4,7‐bis(4‐octyl‐2‐thienyl)‐2,1,3‐ benzothiadiazole] (PB4TB) and poly[4,7‐bis(3‐octyl‐2‐thienyl)‐2,1,3‐benzothiadiazole] (PB3TB) were prepared via iron(III) chloride‐mediated oxidative polymerization. The structures of the polymers were confirmed by ¹H and ¹³C NMR, and the molecular weights were determined by size exclusion chromatography. The optical properties (absorbance and fluorescence) of the monomers and polymers were studied and compared with unsubstituted analogues. The monomers and polymers bearing octyl substituents on the thiophene rings pointing away from the benzothiadiazole units (B4TB and PB4TB) possess a more planar structure, and their optical spectra appear redshifted as compared with those having the octyl chain nearer to the benzothiadiazole (B3TB and PB3TB). The optical band gaps of PB3BT (E_g = 2.01 eV) and PB4BT (E_g = 1.96 eV), however, are at much higher energy levels than that of the unsubstituted electrochemically polymerized PBTB material (E_g = 1.1–1.2 eV) as a result of steric effects of the octyl chains. The electrochemical properties of the monomers and polymers were examined using cyclic voltammetry and reflect the effect of alkyl substitution. B4TB and PB4TB were oxidized at a lower potential than B3TB and PB3TB, whereas their reduction potentials were less negative. The electrochemical band gap calculated from the onset of the reduction and oxidation process agreed with the optical band gap calculated from the absorption edges. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 251–261, 2002     

Substituent and heteroatom effects on the electrochromic properties of similar systems

Electrochromic polymers called poly(3,4‐dihydro‐3,3‐bis ((naphthalen‐1‐yl)methyl)‐2H‐thieno[3,4‐b][1,4]dioxepine) (PProDOT‐Np₂), poly(3,3‐dibenzyl‐3,4‐dihydro‐2H‐selenopheno[3,4‐b][1,4]dioxepine), and poly(3,3‐dibenzyl‐3,4‐dihydro‐2H‐thieno[3,4‐b][1,4]dioxepine) were synthesized electrochemically and the effect of substituents and heteroatoms on the electrochromic properties were investigated for the similar systems. All polymers show electrochromism from a colored state when neutralized to transmissive when oxidized. Although, increasing bulky size (PProDOT‐Np₂) causes lower coloration efficiency (CE) as well as lower optical contrast, the replacement of S atom by Se atom resulted in a lower band gap polymer with a higher CE than its thiophene analog. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Effect of conjugated core building block dibenzo[a,c]phenazine unit on π‐conjugated electrochromic polymers: Red‐shifted absorption

A comparative investigation was undertaken for the electrosynthesis and electrochemical properties of three different electroactive polymers having a conjugated core building block, dibenzo[a,c]phenazine. A series of monomers has been synthesized as regards to thiophene based units; thiophene, 3‐hexyl thiophene, and 3,4‐ethylenedioxythiophene. The effects of different donor substituents on the polymers' electrochemical properties were examined by cyclic voltammetry. Introducing highly electron‐donating (ethylene dioxy) group to the monomer enables solubility while also lowering the oxidation potential. The planarity of the monomer unit enhances π‐stacking and consequently lowering the E_g from 2.4 eV (PHTP) to 1.7 (PTBP). Cyclic voltammetry and spectroelectrochemical measurements revealed that 2,7‐bis(4‐hexylthiophen‐2‐yl)dibenzo[a,c]phenazine (HTP) and 2,7‐bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)dibenzo[a,c]phenazine (TBP) possessed electrochromic behavior. The colorimetry analysis revealed that while PTBP have a color change from red to blue, PHTP has yellow color at neutral state and blue color at oxidized state. Hence the presence of the phenazine derivative as the acceptor unit causes a red shift in the polymers' absorption to have a blue color. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1714–1720, 2010     

A new near‐infrared switchable electrochromic polymer and its device application

A new near‐infrared switchable electrochromic polymer containing carbazole pendant (poly‐SNSC), synthesized by electrochemical polymerization of 2,5‐bis‐dithienyl‐1H‐pyrrole (SNS) main chain, has been prepared. The electrochemical and optical properties of SNSC monomer and its polymer have been investigated. Because of having two different electro‐donor moieties; that is, carbazole and SNS, SNSC gave two separate electrochemical oxidation and also light brown color of the film in the neutral state turn into gray on oxidation. An electrochromic device, contructed in the sandwich configuration [indium tin oxide (ITO)‐coated glass/anodically coloring polymer (poly‐SNSC)//gel electrolyte//cathodically coloring polymer (PEDOT)/ITO‐coated glass] and exhibited a high coloration efficiency (1216 cm² C^–1), a very short response time (about 0.3 s), low driving voltage, and a high redox stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Facile electrochemical preparation of poly(9,9‐dichlorofluorene), a new polyfluorene derivative as green light emitter

High‐quality poly(9,9‐dichlorofluorene) (PDCF), a new part soluble polyfluorene derivative, was easily synthesized electrochemically by direct anodic oxidation of 9,9‐dichlorofluorene (DCF) in boron trifluoride diethyl etherate (BFEE) containing 15% (by volume) trifluoroacetic acid (TFA). It was hard for DCF to deposit on the electrode in neutral solvents such as CH₃CN system. This methodology may help promotion of researches to reveal unknown properties and applications of polyfluorene materials. PDCF films with conductivity of 3.3 × 10^?2 S cm^?1 obtained from this media show good redox activity and thermal stability. The structure and morphology of the polymer were studied by UV–vis, FTIR, ¹H NMR spectra, and scanning electron microscopy, respectively. The results of quantum chemistry calculations and the spectroscopies of dedoped PDCF indicate that the polymerization of DCF mainly occurs via C₍₂₎ and C₍₇₎ position. Fluorescent spectral studies indicate that PDCF film with high fluorescence quantum yields and photochemical stability is a novel green light emitter. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1791–1799, 2010     

Novel low‐bandgap oligothiophene‐based donor‐acceptor alternating conjugated copolymers: Synthesis,properties, and photovoltaic applications

A series of novel soluble donor‐acceptor low‐bandgap‐conjugated polymers consisting of different oligothiophene (OTh) coupled to electron‐accepting moiety 2‐pyran‐4‐ylidenemalononitrile (PM)‐based unit were synthesized by Stille or Suzuki coupling polymerization. The combination of electron‐accepting PM building block with varied OTh_n (the number of thiophene unit increases from 3 to 5) results in enhanced π–π stacking in solid state and intramolecular charge transfer (ICT) transition, which lead to an extension of the absorption spectra of the copolymers. Cyclic voltammetry measurements and molecular orbital distribution calculations indicate that the highest occupied molecular orbitals (HOMO) energy levels could be fine‐tuned by changing the number of thiophene units of the copolymers, and the resulting copolymers possessed relatively low HOMO energy levels promising good air stability and high‐open circuit voltage (V_oc) for photovoltaic application. Bulk heterojunction photovoltaic devices were fabricated by using the copolymers as donors and (6,6)‐phenyl C₆₁‐butyric acid methyl ester as acceptor. It was found that the highest V_oc reached 0.94 V, and the short circuit currents (J_sc) were improved from 1.78 to 2.54 mA/cm², though the power conversion efficiencies of the devices were measured between 0.61 and 0.99% under simulated AM 1.5 solar irradiation of 100 mW/cm², which indicated that this series copolymers can be promising candidates for the photovoltaic applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2765–2776, 2010     

Design and synthesis of 9,9‐dioctyl‐9H‐fluorene based electrochromic polymers

Two novel heterocycle‐fluorene‐heterocycle monomers, 2,2′‐(9,9‐dioctyl‐9H‐fluorene‐2,7‐diyl)dithiophene (Th‐F‐Th) and 5,5′‐(9,9‐dioctyl‐9H‐fluorene‐2,7‐diyl)bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxine) (EDOT‐F‐EDOT), were synthesized via Stille coupling reaction and electropolymerized to form corresponding polymers P(Th‐F‐Th) and P(EDOT‐F‐EDOT). Furthermore, the optoelectronic properties of the obtained monomers and polymers were explored using cyclic voltammetry (CV), UV–vis, and emission spectra and in situ spectroelectrochemical techniques. The band gap values of monomers calculated by DFT were 3.75 eV for EDOT‐F‐EDOT and 4.03 eV for Th‐F‐Th, while that of P(EDOT‐F‐EDOT) and P(Th‐F‐Th) were brought down to 1.70 and 2.10 eV, respectively. Both polymers exhibited excellent redox activity and electrochromic performance. P(EDOT‐F‐EDOT) exhibited a maximum optical contrast of 25.8% at 500 nm in visible region with a response time of 1.2 s. In addition, the coloration efficiency of P(EDOT‐F‐EDOT) was calculated to be 220 cm² C^?1. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 325–334     

Synthesis and photovoltaic properties of a low‐band‐gap polymer consisting of alternating thiophene and benzothiadiazole derivatives for bulk‐heterojunction and dye‐sensitized solar cells

We synthesized a novel low‐band‐gap, conjugated polymer, poly[4,7‐bis(3′,3′‐diheptyl‐3,4‐propylenedioxythienyl)‐2,1,3‐benzothiadiazole] [poly(heptyl₄‐PTBT)], consisting of alternating electron‐rich, diheptyl‐substituted propylene dioxythiophene and electron‐deficient 2,1,3‐benzothiadiazole units, and its photovoltaic properties were investigated. A thin film of poly(heptyl₄‐PTBT) exhibited an optical band gap of 1.55 eV. A bulk‐heterojunction solar cell with indium tin oxide/poly(3,4‐ethylenedioxythiophene)/poly(heptyl₄‐PTBT): methanofullerene [6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM) (1:4)/LiF/Al was fabricated with poly(heptyl₄‐PTBT) as an electron donor and PCBM as an electron acceptor and showed an open‐circuit voltage, short‐circuit current density, and power conversion efficiency of 0.37 V, 3.15 mA/cm², and 0.35% under air mass 1.5 (AM1.5G) illumination (100 mW/cm²), respectively. A solid‐state, dye‐sensitized solar cell with a SnO₂:F/TiO₂/N3 dye/poly(heptyl₄‐PTBT)/Pt device was fabricated with poly(heptyl₄‐PTBT) as a hole‐transport material. This device exhibited a high power conversion efficiency of 3.1%, which is the highest power conversion efficiency value with hole‐transport materials in dye‐sensitized solar cells to date. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1394–1402, 2007     

Soluble alkyl substituted poly(3,4‐propylenedioxyselenophene)s: A new platform for optoelectronic materials

Optical and electrochemical properties of regiosymmetric and soluble alkylenedioxyselenophene‐based electrochromic polymers, namely poly(3,3‐dibutyl‐3,4‐dihydro‐2H‐selenopheno[3,4‐b][1,4]dioxephine) (PProDOS‐C₄), poly(3,3‐dihexyl‐3,4‐dihydro‐2H‐selenopheno[3,4‐b][1,4]dioxephine) (PProDOS‐C₆), and poly(3,3‐didecyl‐3,4‐dihydro‐2H‐selenopheno[3,4‐b][1,4]dioxephine) (PProDOS‐C₁₀), are highlighted. It is noted that these unique polymers have low bandgaps (1.57–1.65 eV), and they are exceptionally stable under ambient atmospheric conditions. Polymer films retained 82–97% of their electroactivity after 5000 cycles. The percent transmittance of PProDOS‐C_n (n = 4, 6, 10) films found to be between 55 and 59%. Furthermore, these novel soluble PProDOS‐C_n polymers showed electrochromic behavior: a color change form pure blue to highly transparent state in a low switching time (1.0 s) during oxidation with high coloration efficiencies (328–864 cm² C^?1) when compared to their thiophene analogues. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A novel high‐contrast ratio electrochromic material from spiro[cyclododecane‐1,9′‐fluorene]bicarbazole

A novel electroactive spirocyclododecylfluorene monomer named 2,7‐bis(carbazol‐9‐yl)‐9,9′‐spiro[cyclododecane‐1,9′‐fluorene] (SFC) was synthesized and electrochemically polymerized to give a very stable multi‐electrochromic polymer (poly‐SFC). Two separate oxidation processes were observed for both SFC monomer and poly‐SFC that carries two carbazole units. The polymeric film of poly‐SFC was coated onto ITO/glass surface, and it shows different colors (transparent, yellowish green, green, and dark green) upon stepwise oxidations. An electrochromic device based on poly‐SFC was assembled in the sandwich cell configuration of ITO/poly‐SFC//gel electrolyte//PEDOT/ITO. Poly‐SFC exhibits 90% of transparency at neutral state and a high contrast ratio (ΔT = 58% at 800 nm). This device constructed from it represents a response time of about 1 s, high coloration efficiency (1377 cm² C^–1) and retained its performance by 96.4% even after 1000 cycles. Exhibiting high transparency at neutral state, reversible redox behavior, resistance to overoxidation, and especially high contrast ratio at near IR region can make poly‐SFC be useful and promising candidate for electrochromic applications despite having a relatively slow response time. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Silafluorene‐based polymers for electrochromic and polymer solar cell applications

In this study, four novel silafluorene (SiF) and benzotriazole (Btz) bearing conjugated polymers are synthesized. In the context of electrochemical and optical studies, these polymers are promising materials both for electrochromic device (ECD) and polymer solar cell (PSC) applications. All of the polymers are ambipolar (both p‐ and n‐dopable) and multichromic. Electrochemistry experiments indicate that incorporation of selenophene instead of thiophene unit increases the HOMO energy level of the polymers. Power conversion efficiency of the PSCs reached 1.75% for PTBTSiF, 1.55% for PSBSSiF, 2.57% for PBTBTSiF, and 1.82% for PBSBSSiF. The hole mobilities of the polymers are estimated through space charge limited current (SCLC) model. PBTBTSiF has the highest hole mobility as 2.44 × 10^?3 cm² V s^?1. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1541–1547     

Dithienobenzimidazole‐containing conjugated donor–acceptor polymers: Synthesis and characterization

The synthesis of two new conjugated polymers based on the relatively under‐exploited monomer, 5,8‐dibromo‐2‐[5‐(2‐hexyldecyl)‐2‐thienyl]‐1H‐dithieno[3,2‐e:2′,3′‐g]benzimidazole (dithienobenzimidazole, DTBI ), and either 4,7‐bis[4‐hexyl‐5‐(trimethylstannyl)‐2‐thienyl]‐2,1,3‐benzothiadiazole ( BTD ) or 2,6‐bis(trimethylstannyl)‐4,8‐bis(5‐(2‐ethylhexyl) thiophen‐2‐yl)benzo[1,2‐b:4,5‐b′]dithiophene ( BDT ) is described. The polymers were synthesized via Stille polycondensation and characterized by traditional methods (¹H NMR, gel‐permeation chromatography, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, thermal gravimetric analysis, differential scanning calorimetry, ultraviolet–visible spectroscopy, photoluminescence, and cyclic voltammetry). Prior to their synthesis, trimer structures were modeled by DFT calculations facilitating a further understanding of the systems' electronic and geometric structure. Polymers were titrated with acid and base to take advantage of their amphiprotic imidazole moiety and their optical response monitored with ultraviolet–visible spectroscopy. Finally, pristine polymer thin‐films were treated with acid and base to evaluate (de)protonation's effect on system electronics, but thin‐film degradation was encountered. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 60–69