Sol‐gel transition behavior of amphiphilic comb‐like poly[(PEG‐b‐PLGA)acrylate] block copolymers

The effects of comb‐like amphiphilic block copolymer architectures on the physical properties such as sol‐gel transition and micellization behaviors with the change of temperature and pH were examined. Comb‐like poly((poly(ethylene glycol)‐b‐(poly(lactic acid‐co‐glycolic acid))acrylate‐co‐acrylic acid) (poly((PEG‐b‐PLGA)A‐co‐AA)) copolymers were synthesized by coupling of poly(acrylic acid) (PAA) with two different kinds of PEG‐b‐PLGA diblock copolymers to investigate the effects of the number of branches and hydrophilicity/hydrophobicity on the sol‐gel transition and micellization. The molecular weights and chemical structures were confirmed by GPC and ¹H NMR. The number of PEG‐b‐PLGA branches was gradually deviated from the feed molar ratio with increasing the molecular weight and the number of branches and due to the bulkiness of PEG‐b‐PLGA. Poly[(PEG‐b‐PLGA)A‐co‐AA] aqueous solutions showed thermosensitive sol‐gel transition behavior, and the gelation took place at lower concentration with increasing the number of branches and PLGA chain length due to the increase of hydrophobicity. The temperature, at which abrupt increase of viscosity by dynamic rheometer appeared, was also in good agreement with sol‐gel transition by tube‐titling method. The CMC, calculated from UV‐Visible spectroscopy using DPH as hydrophobic dye, also decreased with increasing the number of PEG‐b‐PLGA branches and PLGA chain length with same reason. The micelle size was increased with increasing temperature at the initial stage, however, decreased with further increase of temperature, since the micelles were, first, aggregated by hydrophobic intermolecular interaction, and then fragmented by dehydration of PEG segments with increasing temperature. PH‐sensitive PAA backbone played a key role in physical properties. With decreasing pH, sol‐to‐gel transition temperature, CMC values, and micelle size were decreased because of the increase of hydrophobicity resulting form non‐ionized acrylic acid. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1287–1297, 2010     

Biodegradable and stimuli sensitive amphiphilic graft copolymers and their sol–gel phase transition behavior

pH and temperature‐sensitive biodegradable poly(β‐aminoester)‐graft‐poly(ε‐caprolactone)‐block‐methoxy poly(ethylene glycol) (PBAE‐g‐PCL‐b‐mPEG) amphiphilic graft copolymers with different molecular weights were synthesized. The structure of these copolymers was adjusted by varying the feed ratios of ε‐caprolactone to methoxy poly(ethylene glycol)s (mPEG), amine and diacrylate monomer amounts and the molecular weight of mPEG. Aqueous solutions of these copolymers formed micelles at lower concentrations; however, the concentrated solutions showed a reversible sol–gel transition property depending on both pH and temperature changes under representative physiological conditions (pH 7.4, 37°C). The effects of the molecular weight of pH‐sensitive poly(β‐aminoester) block and mPEG group, the hydrophobic to hydrophilic block ratio (PCL/mPEG) and the concentration of the copolymer on the sol–gel transition were investigated. Proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatography measurements were used to characterize the structure of the synthesized copolymers. The self‐assemble behavior and critical micelle concentration of the amphiphilic copolymers were estimated in phosphate buffer solution using fluorescence spectroscopy. The gelling behavior was measured by using tube inversion method. At pH 7.4, all copolymer solutions prepared 20 wt% concentration indicated sol–gel transition with increasing temperature. In vitro degradation experiments displayed that the synthesized graft copolymers mostly degraded hydrolytically within 20 days under physiological conditions. In order to investigate the potential application of synthesized hydrogels in drug delivery, Methylene Blue was used and approximately 70% of the loaded amount was released in 120 hr. The findings indicate that obtained graft copolymers can be used as injectable biodegradable carriers for pharmaceutical drugs. Copyright © 2015 John Wiley & Sons, Ltd.     

Temperature‐induced spontaneous sol–gel transitions of poly(D,L‐lactic acid‐co‐glycolic acid)‐b‐poly(ethylene glycol)‐b‐poly(D,L‐lactic acid‐co‐glycolic acid) triblock copolymers and their end‐capped derivatives in water

The spontaneous hydrogel formation of a sort of biocompatible and biodegradable amphiphilic block copolymer in water was observed, and the underlying gelling mechanism was assumed. A series of ABA‐type triblock copolymers [poly(D,L ‐lactic acid‐co‐glycolic acid)‐b‐poly(ethylene glycol)‐b‐poly(D,L ‐lactic acid‐co‐glycolic acid)] and different derivatives end‐capped by small alkyl groups were synthesized, and the aqueous phase behaviors of these samples were studied. The virgin triblock copolymers and most of the derivatives exhibited a temperature‐dependent reversible sol–gel transition in water. Both the poly(D,L ‐lactic acid‐co‐glycolic acid) length and end group were found to significantly tune the gel windows in the phase diagrams, but with different behaviors. The critical micelle concentrations were much lower than the associated critical gel concentrations, and an intact micellar structure remained after gelation. A combination of various measurement techniques confirmed that the sol–gel transition with an increase in the temperature was induced not simply via the self‐assembly of amphiphilic polymer chains but also via the further hydrophobic aggregation of micelles resulting in a micelle network due to a large‐scale self‐assembly. The coarsening of the micelle network was further suggested to account for the transition from a transparent gel to an opaque gel. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1122–1133, 2007     

Sol–gel transition behavior of biodegradable three‐arm and four‐arm star‐shaped PLGA–PEG block copolymer aqueous solution

Two types of temperature‐sensitive biodegradable three‐arm and four‐arm star‐shaped poly(DL ‐lactic acid‐co‐glycolic acid‐b‐ethylene glycol) (3‐arm and 4‐arm PLGA–PEG) were successfully synthesized via the coupling reaction of 3‐arm and 4‐arm PLGA and α‐monocarboxyl‐ω‐monomethoxypoly(ethylene glycol) (CMPEG). In dilute aqueous solutions, star PLGA–PEGs showed the temperature‐ and concentration‐dependent formation and aggregation of micelles over specific concentration and specific temperature. With increasing the molecular weight and the relative hydrophobicity of hydrophobic PLGA block, critical micelle temperature (CMT) decreased. Aqueous solution of 4‐arm PLGA–PEG started to form micelles at lower temperature and showed sharper temperature‐dependent growth in micelle size. These results are due to the enhanced hydrophobicity of PLGA block. On the other hand, at high concentration, two types of 3‐arm and 4‐arm PLGA–PEG showed sol–gel–sol transition behavior as the temperature was increased. The 3‐arm and 4‐arm PLGA–PEG showed sol–gel transition at higher polymer concentrations (above 24 wt %) than the PEG–PLGA–PEG triblock copolymer. As the molecular weight and the relative hydrophobicity of PLGA block increased, the critical gel concentration (CGC) decreased. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 888–899, 2006     

Synthesis and characterization of thermoresponsive amphiphilic block copolymers incorporating a poly(ethylene oxide‐stat‐propylene oxide) block

Amphiphilic BuO‐(PEO‐stat‐PPO)‐block‐PLA‐OH diblock and MeO‐PEO‐block‐(PEO‐stat‐PPO)‐block‐PLA‐OH triblock copolymers incorporating thermoresponsive poly(ethylene oxide‐stat‐propylene oxide) (PEO‐stat‐PPO) blocks were prepared by ring‐opening polymerization of lactide (LA) initiated by macroinitiators formed from treating BuO‐(PEO‐stat‐PPO)‐OH and MeO‐PEO‐block‐(PEO‐stat‐PPO)‐OH with AlEt₃. MeO‐PEO‐block‐(PEO‐stat‐PPO)‐OH was prepared by coupling MeO‐PEO‐OH and HO‐(PEO‐stat‐PPO)‐OH, followed by chromatographic purification. The cloud points of 0.2% aqueous solutions are between 36 and 46 °C for the diblock copolymers that contain a 50 wt % EO thermoresponsive block and 78 °C for the triblock copolymer that contains a 75 wt % EO thermoresponsive block. Variable temperature ¹H NMR spectra recorded on D₂O solutions of the diblock copolymers display no PLA resonances below the cloud point and fairly sharp PLA resonances above the cloud point, suggesting that desolvation of the thermoresponsive block increases the miscibility of the two blocks. Preliminary characterization of the micelles formed in aqueous solutions of BuO‐(PEO‐stat‐PPO)‐block‐PLA‐OH conducted using laser scanning confocal microscopy and pulsed gradient spin echo NMR point to significant changes in the size of the micellar aggregates as a function of temperature. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5156–5167, 2005     

Double thermoresponsive block–random copolymers with adjustable phase transition temperatures: From block‐like to gradient‐like behavior

Stimuli‐responsive block–random copolymers are very useful “smart” materials as their switching behavior can be tuned by simply adjusting the composition of the random copolymer block. Because of that, we synthesized double thermoresponsive poly(N‐acryloylpyrrolidine)‐block‐poly(N‐acryloylpiperidine‐co‐N‐acryloylpyrrolidine) (PAPy‐b‐P(APi‐co‐APy)) copolymers via reversible addition fragmentation chain transfer (RAFT) polymerization and investigated their temperature‐induced self‐assembly in aqueous solution. By varying the APi/APy ratio in the random copolymer block, its phase transition temperature (PTT₁) can indeed be precisely adjusted while the temperature‐induced collapse upon heating leads to a fully reversible well‐defined micellization. By making the two blocks compositionally similar to more than 60%, the polymers' mechanistic thermoresponsiveness can furthermore be changed from block‐like to rather gradient‐like behavior. This means the micellization onset at PTT₁ and the corona collapse at the PTT of the more hydrophilic pure PAPy block (PTT₂) overlap resulting in one single broad transition. This work thus contributes to the detailed understanding of design, synthesis and mechanistic behavior of tailored “on‐demand” switchable materials. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 399–411     

Molecular captain: A light‐sensitive linker molecule in poly(ethylene glycol)‐poly(L‐alanine)‐poly(ethylene glycol) triblock copolymer directs molecular nano‐assembly,conformation, and sol‐gel transition

We report a poly(ethylene glycol)‐poly(L ‐alanine)‐azobenzene‐poly(L ‐alanine)‐poly(ethylene glycol) (PEG‐PA‐Z‐PA‐PEG) as a temperature and light sensitive polymer. The poly(ethylene glycol)‐poly(L ‐alanine) diblock copolymers with a flexible‐rigid block structure were coupled by an azobenzene group that undergoes a reversible configurational change between “trans” and “cis” upon exposure to UV and vis light. The single azobenzene molecule embedded in the middle of a block copolymer with a flexible (shell)‐rigid (core) structure significantly affected molecular assembly, micelle size, polypeptide secondary structure, and sol‐to‐gel transition temperature of the polymer aqueous solution, depending on its exposure to UV or vis light. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of pH sensitive poly(glycidol)‐b‐poly(4‐vinylpyridine) block copolymers

Block copolymers of poly(glycidol)‐b‐poly(4‐vinylpyridine) were obtained by ATRP of 4‐vinylpyridine initiated by ω‐(2‐chloropropionyl) poly(glycidol) macroinitiators. By changing the monomer/macroinitiator ratio in the synthesis polymers with varied P4VP/PGl molar ratio were obtained. The obtained block copolymers showed pH sensitive solubility. It was found that the linkage of a hydrophilic poly(glycidol) block to a P4VP influenced the pK_a value of P4VP. DLS measurements showed the formation of fully collapsed aggregates exceeding pH 4.7. Above this pH values the collapsed P4VP core of the aggregates was stabilized by a surrounding hydrophilic poly(glycidol) corona. The size of the aggregates depended significantly upon the composition of the block copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1782–1794, 2009     

Thermal gelation or gel melting: (ethylene glycol)113‐(l‐alanine)12 and (ethylene glycol)113‐(l‐lactic acid)12

When PEG (M.W.～5000 Daltons) is conjugated to poly(l ‐alanine), the polymer aqueous solutions (<10.0 wt.%) undergo sol‐to‐gel (thermal gelation), whereas it is conjugated to poly(l ‐lactic acid), the polymer aqueous solutions (>30.0 wt.%) undergo gel‐to‐sol (gel melting) as the temperature increases. In the search for molecular origins of such a quite different phase behavior, poly(ethylene glycol)‐poly(l ‐alanine) (PEG‐PA; EG₁₁₃‐A₁₂) and poly(ethylene glycol)‐poly(l ‐lactic acid) (PEG‐PLA; EG₁₁₃‐LA₁₂) are synthesized and their aqueous solution behavior is investigated. PEG‐PAs with an α‐helical core assemble into micelles with a broad size distribution, and the dehydration of PEG drives the aggregation of the micelles, leading to thermal gelation, whereas increased molecular motion of the PLA core overwhelms the partial dehydration of PEG, thus gel melting of the PEG‐PLA aqueous solutions occurs. The core‐rigidity of micelles must be one of the key factors in determining whether a polymer aqueous solution undergoes sol‐to‐gel or gel‐to‐sol transition, as the temperature increases. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, , 52, 2434–2441     

Phase‐transition characteristics of amphiphilic poly(2‐ethyl‐2‐oxazoline)/poly(ε‐caprolactone) block copolymers in aqueous solutions

Amphiphilic diblock and triblock copolymers of various block compositions based on hydrophilic poly(2‐ethyl‐2‐oxazoline) (PEtOz) and hydrophobic poly(ε‐caprolactone) were synthesized. The micelle formation of these block copolymers in aqueous media was confirmed by a fluorescence technique and dynamic light scattering. The critical micelle concentrations ranged from 35.5 to 4.6 mg/L for diblock copolymers and 4.7 to 9.0 mg/L for triblock copolymers, depending on the block composition. The phase‐transition behaviors of the block copolymers in concentrated aqueous solutions were investigated. When the temperature was increased, aqueous solutions of diblock and triblock copolymers exhibited gel–sol transition and precipitation, both of which were thermally reversible. The gel–sol transition‐ and precipitation temperatures were manipulated by adjustment of the block composition. As the hydrophobic portion of block copolymers became higher, a larger gel region was generated. In the presence of sodium chloride, the phase transitions were shifted to a lower temperature level. Sodium thiocyanate displaced the gel region and precipitation temperatures to a higher temperature level. The low molecular weight saccharides, such as glucose and maltose, contributed to the shift of phase‐transition temperatures to a lower temperature level, where glucose was more effective than maltose in lowering the gel–sol transition temperatures. The malonic acid that formed hydrogen bonds with the PEtOz shell of micelles was effective in lowering phase‐transition temperatures to 1.0M, above which concentration the block copolymer solutions formed complex precipitates. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2400–2408, 2000     

β‐Lactam functionalized poly(isoprene‐b‐ethylene oxide) amphiphilic block copolymers

Amphiphilic block copolymers containing β‐lactam groups on the polyisoprene block were synthesized from poly(isoprene‐b‐ethylene oxide) (IEO) diblock copolymer precursors, prepared by anionic polymerization. β‐Lactam functionalization was achieved via reaction of the polyisoprene (PI) block with chlorosulfonyl isocyanate and subsequent reduction. The resulting block copolymers were molecularly characterized by SEC, FTIR, and NMR spectroscopies and DSC. Functionalization was found to proceed in high yields, altering the solubility properties of the PI block and those of the functionalized diblocks. Hydrogen bond formation is assumed to be responsible for the decreased crystallinity of the poly(ethylene oxide) block (PEO) in the bulk state as indicated by DSC measurements. The self‐assembly behavior of the β‐lactam functionalized poly(isoprene‐b‐ethylene oxide) copolymers (LIEO) in aqueous solutions was studied by dynamic light scattering (DLS), static light scattering (SLS), fluorescence spectroscopy, and atomic force microscopy (AFM). Nearly spherical loose aggregates were formed by the LIEO block copolymers, having lower aggregation numbers and higher cmc values compared to the IEO precursors, as a result of the increased polarity of the β‐lactam rings incorporated in the PI blocks. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 24–33, 2010     

Fully biodegradable polymeric micelles based on hydrophobic‐ and hydrophilic‐functionalized poly(lactide) block copolymers

Novel amphiphilic diblock copolymers from a combination of hydrophobic‐functional poly(lactides) (PLAs) with hydrophilic‐functional PLAs or poly(malic acid), respectively, toward fully biodegradable materials for medical applications, such as micellar drug delivery systems, are reported for the first time. The presented PLA‐based polymeric micelles are characterized by their small size below 100 nm, low critical micellar concentrations, good in vitro stabilities at room and body temperature, and efficient incorporation capability of hydrophobic compounds, particularly with regard to potential drug substances. Moreover, the advantage of being totally degradable with different rates at different pH values, as investigated in medical cancer treatment, is demonstrated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3244–3254, 2010     

Effects of polydepsipeptide side‐chain groups on the temperature sensitivity of triblock copolymers composed of polydepsipeptides and poly(ethylene glycol)

To develop new types of biodegradable polymers possessing predictable responses to changes in temperature, ABA‐type and BAB‐type triblock copolymers composed of various polydepsipeptides (PDP) and poly(ethylene glycol) (PEG) (PDP‐PEG‐PDP and PEG‐PDP‐PEG) were synthesized. The specific focus of this study was on the effect of the different side‐chain groups of various amino acids on the temperature‐responsive behavior of the triblock copolymers. An ABA‐type triblock copolymer containing the less hydrophobic glycine (PGG‐PEG‐PGG) did not exhibit any temperature‐responsive behavior; however, ABA‐type triblock copolymers containing the hydrophobic α‐amino acids, L ‐leucine and L ‐phenylalanine (PGL‐PEG‐PGL or PGF‐PEG‐PGF), did exhibit temperature‐responsive behavior. The cloud point of PGF‐PEG‐PGF was 10 °C lower than that of PGL‐PEG‐PGL. It can be possible to control temperature‐sensitivity by changing not only PDP segment length but also kind of α‐amino acid in PDP segment. Moreover, BAB‐type triblock copolymer containing L ‐leucine (PEG‐PGL‐PEG) showed temperature‐responsive sol‐gel transition. Because polydepsipeptides are biodegradable polymers, the information obtained in this study is useful to design biodegradable injectable polymers having controllable temperature‐sensitivity for biomedical use.© 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3892–3903, 2009     

Bioreducible and core‐crosslinked hybrid micelles from trimethoxysilyl‐ended poly(ε‐caprolactone)‐S‐S‐poly(ethylene oxide) block copolymers: Thiol‐ene click synthesis and properties

Bioreducible and core‐crosslinked hybrid micelles were for the first time fabricated from biodegradable and biocompatible trimethoxysilyl‐terminated and disulfide‐bond‐linked block copolymers poly(ε‐caprolactone)‐S‐S‐poly(ethylene oxide), which were prepared by combining thiol‐ene coupling reaction and ring‐opening polymerization. The molecular structures, physicochemical, self‐assembly, and bioreducible properties of these copolymers were thoroughly characterized by means of FTIR, ¹H NMR, gel permeation chromatography, differential scanning calorimetry, wide‐angle X‐ray diffraction, dynamic light scattering (DLS), and transmission electron microscopy. The core‐crosslinking sol‐gel reaction was confirmed by ¹H NMR, and the core‐crosslinked hybrid micelles contained about 3 wt % of silica. The bioreducible property of both uncrosslinked and core‐crosslinked micelles in 10 mM 1,4‐dithiothreitol (DTT) solution was monitored by DLS, which demonstrated that the PEO corona gradually shedded from the PCL core. The anticancer doxorubicin drug‐loaded micelles showed nearly spherical morphology compared with blank micelles, presenting a DTT reduction‐triggered drug‐release profile at 37 °C. Notably, the core‐crosslinked hybrid micelles showed about twofold drug loading capacities and a half drug‐release rate compared with the uncross‐liked counterparts. This work provides a useful platform for the fabrication of bioreducible and core‐crosslinked hybrid micelles potential for anticancer drug delivery system. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis,self‐assembly,drug‐release behavior,and cytotoxicity of triblock and pentablock copolymers composed of poly(ε‐caprolactone), poly(L‐lactide), and poly(ethylene glycol)

Biocompatible and biodegradable ABC and ABCBA triblock and pentablock copolymers composed of poly(ε‐caprolactone) (PCL), poly(L ‐lactide) (PLA), and poly(ethylene glycol) (PEO) with controlled molecular weights and low polydispersities were synthesized by a click conjugation between alkyne‐terminated PCL‐b‐PLA and azide‐terminated PEO. Their molecular structures, physicochemical and self‐assembly properties were thoroughly characterized by means of FT‐IR, ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, wide‐angle X‐ray diffraction, dynamic light scattering, and transmission electron microscopy. These copolymers formed microphase‐separated crystalline materials in solid state, where the crystallization of PCL block was greatly restricted by both PEO and PLA blocks. These copolymers self‐assembled into starlike and flowerlike micelles with a spherical morphology, and the micelles were stable over 27 days in aqueous solution at 37 °C. The doxorubicin (DOX) drug‐loaded nanoparticles showed a bigger size with a similar spherical morphology compared to blank nanoparticles, demonstrating a biphasic drug‐release profile in buffer solution and at 37 °C. Moreover, the DOX‐loaded nanoparticles fabricated from the pentablock copolymer sustained a longer drug‐release period (25 days) at pH 7.4 than those of the triblock copolymer. The blank nanoparticles showed good cell viability, whereas the DOX‐loaded nanoparticles killed fewer cells than free DOX, suggesting a controlled drug‐release effect. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Dual Stimuli‐Responsive Polymeric Micelles Exhibiting “AND” Logic Gate for Controlled Release of Adriamycin

A new controlled release polymer micelle was designed and synthesized based on the concept of the “AND” logic with two orthogonal molecular triggers, namely pH and reduction, for intracellular drug delivery. Specifically, a hydrazine functionalized PEO‐b‐PMAA block copolymer was used to attach adriamycin (ADR) through the formation of hydrazone, then the as‐prepared ADR‐conjugated block copolymer micelles could be crosslinked by dithiodiethanoic acid. ADR was found to release most efficiently under both the low pH and the reductive conditions. This smart device is therefore equipped with two triggers with the “AND” logic for the releasing action, which is suitable for more complicated physiological conditions because the “ON” state is only realized under the simultaneous presence of the dual signal stimuli.

     

Finely Tuned Thermo‐Responsive Block Copolymer Micelles for Photothermal Effect‐Triggered Efficient Cellular Internalization

Although biodegradable amphiphilic block copolymer micelles have been widely applied in the clinical applications as drug delivery nanocarriers, low‐efficiency cellular internalization frequently reduces therapeutic efficacy of the loaded drugs. Here, photothermal effect‐promoted cellular internalization of finely tuned thermo‐responsive amphiphilic biodegradable block copolymer nanocarriers via noninvasive stimuli of near‐infrared (NIR) light irradiation is demonstrated. Amphiphilic block copolymers, poly(ε‐caprolactone)‐block‐poly(N‐isopropylacrylamide‐co‐N,N‐dimethylacrylamide) (PCL‐b‐P(NIPAM‐co‐DMA)), are prepared with finely tuned compositions of P(NIPAM‐co‐DMA) for desirable lower critical solution temperature of the block copolymer micelles in aqueous solution. The block copolymers are then used to co‐encapsulate doxorubicin and indocyanine green, which show high encapsulation efficiency and significant photothermal effect upon exposure to NIR light irradiation. The photothermal effect‐induced collapse and hydrophilic‐to‐hydrophobic transition of P(NIPAM‐co‐DMA) shells significantly enhance the interactions between drug‐loaded micelles and cell membranes, which dramatically promote the cellular internalization of the micelles and therapeutic efficacy of loaded anticancer drugs.

     

Redox‐ and pH‐Responsive Cysteamine‐Modified Poly(aspartic acid) Showing a Reversible Sol–Gel Transition

Synthesis and characterization of a pH‐ and redox‐sensitive hydrogel of poly(aspartic acid) are reported. Reversible gelation and dissolution are achieved both in dimethylformamide and in aqueous medium via a thiol‐disulphide interconversion in the side chain of the polymers. Structural changes are confirmed by Raman microscopy and rheological measurements. Injectable aqueous solutions of thiolated poly(aspartic acid) can be converted into mechanically stable gels by oxidation, which can be useful for drug encapsulation and targeted delivery. Reduction‐facilitated release of an entrapped drug from disulphide cross‐linked hydrogels is studied.

     

Reduction and pH dual‐responsive block copolymers containing pendent p‐nitrobenzyl carbamate functionalities: Synthesis and self‐assembly behavior

We report on the preparation of reduction‐responsive amphiphilic block copolymers containing pendent p‐nitrobenzyl carbamate (pNBC)‐caged primary amine moieties by reversible addition–fragmentation chain transfer (RAFT) radical polymerization using a poly(ethylene glycol)‐based macro‐RAFT agent. The block copolymers self‐assembled to form micelles or vesicles in water, depending on the length of hydrophobic block. Triggered by a chemical reductant, sodium dithionite, the pNBC moieties decomposed through a cascade 1,6‐elimination and decarboxylation reactions to liberate primary amine groups of the linkages, resulting in the disruption of the assemblies. The reduction sensitivity of assemblies was affected by the length of hydrophobic block and the structure of amino acid‐derived linkers. Using hydrophobic dye Nile red (NR) as a model drug, the polymeric assemblies were used as nanocarriers to evaluate the potential for drug delivery. The NR‐loaded nanoparticles demonstrated a reduction‐triggered release profile. Moreover, the liberation of amine groups converted the reduction‐responsive polymer into a pH‐sensitive polymer with which an accelerated release of NR was observed by simultaneous application of reduction and pH triggers. It is expected that these reduction‐responsive block copolymers can offer a new platform for intracellular drug delivery. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1333–1343     

A Near‐Infrared Photothermal Effect‐Responsive Drug Delivery System Based on Indocyanine Green and Doxorubicin‐Loaded Polymeric Micelles Mediated by Reversible Diels–Alder Reaction

Near‐infrared light (NIR) possesses great advantages for light‐responsive controllable drug release, such as deep tissue penetration and low damage to healthy tissues. Herein, a NIR‐responsive drug delivery system is developed based on a NIR dye, indocyanine green (ICG), and anticancer drug, doxorubicin (DOX)‐loaded thermoresponsive block copolymer micelles, in which the drug release can be controlled via NIR irradiation. First, block copolymers, poly(oligo(ethylene glycol) methacrylate)‐block‐poly(furfuryl methacrylate) (POEGMA‐b‐PFMA), are synthesized by sequential reversible addition‐fragmentation chain‐transfer (RAFT) polymerization, followed by modification with N‐octyl maleimide through Diels–Alder (DA) reaction to produce POEGMA‐b‐POMFMA. The self‐assembly of POEGMA‐b‐POMFMA by nano­precipitation in aqueous solution affords the polymeric micelles which are used to simultaneously encapsulate ICG and DOX. Upon irradiation by NIR light (805 nm), the loaded DOX is released rapidly from the micelles due to partial retro DA reaction and local temperature increase‐induced faster drug diffusion by the photothermal effect. Cytotoxicity evaluation and intracellular distribution observation demonstrate significant synergistic effects of NIR‐triggered drug release, photothermal, and chemotherapy toward cancer cells under NIR irradiation.