Preparation of novel macromonomers and study of their polymerization

Novel macromonomers of polystyrene and poly(tert‐butyl acrylate) containing a methacryloyl group as a polymerizable unit and two chains of the same length were prepared in two steps: the synthesis of the precursors through the atom transfer radical polymerization of styrene and tert‐butyl acrylate initiated by 1‐hydroxymethyl‐1,1‐di[(2‐bromoisobutyryloxy)methyl] ethane and the esterification of the hydroxyl group in the precursors with methacryloyl chloride. The molecular weight and polydispersity of the macromonomers were controllable because of the living nature of the atom transfer radical polymerization. Gel permeation chromatography, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and hydrolysis confirmed the structure of the novel macromonomers. The homopolymerization and copolymerization of the macromonomers were investigated to prepare branched copolymers in which two chains were grafted from every repeating unit. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3887–3896, 2004     

Stimuli‐responsive brush‐shaped conjugated polymers with pendant well‐defined poly(vinyl ether)s

For the synthesis of brush‐shaped conjugated polymers consisting of a poly(phenylene butadiynylene) backbone and well‐defined poly(vinyl ether) (polyVE) side chains, we designed polyVE‐based macromonomers bearing a diethynyl benzene group at the terminus and applied them to the grafting through synthesis. The macromonomer (DE‐PIBVE) was synthesized by living cationic polymerization of isobutyl VE (IBVE) using a functionalized initiator (TMS‐DEVE‐TFA) having a TMS protected diethynyl benzene moiety, followed by deprotection of the TMS groups. As a result, we succeeded in the synthesis of the target brush‐shaped conjugated polymers [poly(DE‐PIBVE)] by oxidative coupling reaction of the diethynyl benzene groups. We found that the solution of poly(DE‐PIBVE) with a specific side chain length exhibited solvatochromism and thermochromism depending on the polarity of the media employed. This phenomenon was attributed to self‐assembly in polar media due to the intermolecular π–π interaction between neighboring conjugated polymer backbones, where the self‐assembly behavior would be closely related to the pendant polyVE structure. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3318–3325     

Synthesis and characterization of brush diblock and triblock copolymers bearing polynorbornene backbone and poly(l‐lactide) and/or poly(hexyl isocyanate) side chains by a combination of coordination and ring opening metathesis polymerization

We report the synthesis of poly(l ‐lactide) and poly(hexyl isocyanate) macromonomers using bischloro‐η⁵‐cyclopentadienyl(bicyclo[2.2.1]‐hept‐5‐en‐2‐oxy) Titanium (IV), [CpTiCl₂(O‐NBE)]. These macromonomers bearing a norbornene end group were polymerized towards brush copolymers employing Grubbs' first generation catalyst. Brush copolymers consisting of blocks with different side chains were synthesized. The polymers were characterized by Size Exclusion Chromatography, Nuclear Magnetic Resonance, and their thermal properties were investigated by Thermogravimetric Analysis, and Differential Scanning Calorimetry analysis. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3455–3465     

Rodlike macromolecules through spatial overlapping of thiophene dendrons

Two novel dendritic macromonomers 7 and 8 functionalized with electroactive conjugated thiophene oligomers were synthesized by stepwise cross‐coupling reactions and the introduction of a vinyl group at the focal point. Both macromonomers were polymerized into dendronized polymers 9 and 10 by using a radical polymerization method. The photophysical and redox behaviors of dendronized polymers 9 and 10 are significantly different from those of the corresponding macromonomers. This difference may result from the spatial overlapping of thiophene dendrons through π–π interactions when the dendrons are connected to a polymer backbone. The dendronized polymers can organize into large‐area two‐dimensional sheets with a thickness of 4.8 nm. Polymer 9 , which has all‐dendritic thiophene side chains, exhibited enhanced conductivity by partial doping with iodine or nitrosonium tetrafluoroborate (NOBF₄). The novel amphiphilic dendronized polymer 15 was synthesized by the atom‐transfer radical polymerization of macromonomer 7 from a poly(ethylene glycol) (PEG) macroinitiator and was found to have a self‐organized structure in water.     

Water soluble poly(ethylene oxide) functionalized norbornene polymers

The synthesis of three different poly(ethylene oxide) macromonomers with a norbornene and oxanorbornene end group is presented. The macromonomers were polymerized to comb‐polymers by ring‐opening metathesis polymerization (ROMP) using Grubbs' Catalyst G3 to produce water soluble polymers with polydispersities between 1.04 and 1.30 and molecular weights between 14,000 and 50,000 g/mol. Characterization by static and dynamic light scattering reveals that the comb‐polymers with norbornene backbone are molecularly disperse in aqueous solution, while the oxanorbornene‐backbone polymers form small water‐soluble aggregates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2640–2648, 2008     

Synthesis of dendronized polymer brushes containing metallo‐supramolecular polymer side chains

A new kind of dendronized polymer brush with metallo‐supramolecular polymer side chains was fabricated by a combination of macromonomer and graft‐to approach. The alternating copolymers of maleic anhydride and styryl macromonomers pendant with Fréchet‐type dendrons of three generations were reported previously. In this article, terpyridine groups were introduced along the backbone of the dendronized polymers through the amidolysis of anhydride groups. The terpyridine functionalized PEO linear chains were then incorporated through the complexation of terpyridine and Ru(II) ion. Thus, dendronized polymer brushes with amphiphilic properties were synthesized. AFM analysis showed worm‐like single molecular morphologies of the polymers of three generations, and ¹H NMR analysis indicated that such molecular brushes had an amphiphilic nature in solution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3303–3310, 2007     

Multisensitive polymers based on 2‐vinylpyridine and N‐isopropylacrylamide *

Poly(2‐vinylpyridine) (P2VP) containing functionalized end groups was synthesized using nitroxyl‐mediated radical polymerization with a hydroxy‐functionalized stable free radical. It was shown that P2VP could be synthesized with variable molar masses and low polydispersities. The transformation of the hydroxy groups to an acrylic ester led to the formation of macromonomers. A free‐radical copolymerization of these macromonomers with N‐isopropylacrylamide gave a graft copolymer with a poly(N‐ispopropylacrylamide) backbone and P2VP side chains. Polymers containing different amounts of the monomers were synthesized. It was possible to vary both the amount of P2VP side chains at a constant chain length of the macromonomer and the chain length at a nearly constant chain number. The behavior of the multifunctional macromolecules at different temperatures and pH values was investigated using dynamic light scattering and DSC. The macromolecules were found to retain the specific properties of the homopolymers. The hydrodynamic radii of the synthesized graft copolymers were both dependent on the temperature and pH value. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3797–3804, 2001     

Synthesis of hyperbranched polymers with precise conjugation length

A set of AB₂ type monodisperse conjugated oligomers carrying two bromo functional groups and one boronic ester functional group were prepared by iterative deprotection and Sonogashira cross‐coupling reactions. Suzuki polycondensation of these AB₂ type monodisperse oligomers afforded hyperbranched polymers. The hyperbranched conjugated polymers we prepared possess not only precisely controlled conjugation length like monodisperse conjugated oligomers but also the structural feature of hyperbranched polymers. Optical property investigation demonstrated that the maximum absorption and emission wavelength red‐shifted along with the increasing of the conjugation length between the two branching points and the hyperbranched structure could effectively reduce the aggregation of the conjugated polymer chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1084–1092, 2007     

Blend of electroactive poly(3-dodecylthiophene) with comb-like alkylated polyacrylate

The conformational mode change of the stiff alkylated polymer, poly(3-dodecyl thiophene) (PDDT), with a flexible comb-like coil poly(octadecyl acrylate) (PODA), and the effect of intermolecular interaction between these two alkylated polymers with different chemical structure of the backbone were investigated using UV-Vis spectroscopy, Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimeter (DSC), and wide-angle x-ray diffraction (WAXD). In addition to the characteristics of thermochromism, a homogeneous one phase was observed above 175°C when the PODA content was 10 wt % or less. Increased conductivity in the PDDT/PODA blend due to the highly conjugated π-system of PDDT backbone was observed in the presence of nonelectroactive PODA. A red-shift of absorption maximum of PDDT/PODA blend observed in solid state at room temperature. From the FTIR spectra, the gauche-trans conformational structure change of methylene units was investigated in two alkylated polymer blends. The increase of combined heat of fusion of the alkyl side chain melting of PDDT and the endothermic peak of PODA, as well as the interlayer d-spacing of PDDT main chain were also observed with the addition of PODA in blends. A more ordered conformational structure of rigid rod backbone of PDDT was induced due to the attractive intermolecular interaction which can cause cocrystallization between the alkylated side chains of two polymers. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 :1025–1041, 1997     

Prediction and phase segregation in thin‐film of conjugated polymer blends

Blending conjugated polymers is an efficient method to improve the properties of the films. The phase diagram of poly(9,9‐dihexylfluorene) (PF) and poly(2‐methoxy‐5‐(2′‐ethyl‐hexyloxyl)‐p‐phenylene vinylene) (MEHPPV) was predicted by a modified Flory–Huggins theory based on the topological method (graph theory) for the structure‐property correlations. It shows that the two polymers have a strong trend to separate. Atomic/friction force microscopy (AFM/FFM) measurements show there exist microphase separations in film prepared at room temperature. After annealing at 160 °C, serious phase segregations took place in both the lateral and vertical direction. The photoluminescence of the thin films was also measured by a fluorophotometer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1382–1391, 2005     

Chiral oxazoline substituted optically active poly(m‐phenylene)s: Synthesis and coupling polymerizations of (S)‐4‐benzyl‐2‐(3,5‐dihalidephenyl) oxazoline using transition metal catalysts

Optically active poly(m‐phenylene)s substituted with chiral oxazoline derivatives have been synthesized by the nickel‐catalyzed Yamamoto coupling reaction of optically active (S)‐4‐benzyl‐2‐(3,5‐dihalidephenyl)oxazoline derivatives (X = Br or I). The structures and chiroptical properties of the polymers were characterized by spectroscopic methods and thermal gravimetric analyses. The polymers showed higher absolute optical specific rotation values than their corresponding monomer, and showed a Cotton effect at transition region of conjugated main chain. The optical activities of the polymers should be attributed to the higher order structure such as helical conformations. Moreover, the helical conformation could be induced by addition of metal salts into polymer solutions. The polymers showed good thermal stabilities, which was attributable to the oxazoline side chains. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Energy transfer in poly(3‐hexylthiophene)‐g‐Polyfluorene graft copolymers

Conjugated graft copolymers consisting of a poly(3‐hexylthiophene) (P3HT) backbone and poly(9,9'‐dioctylfluorene) side chains (PF) with different grafting degrees were synthesized by the CuAAC reaction. The properties of these materials were studied by UV‐Vis and fluorescence spectroscopy. The former technique provides insight in their self‐assembly, while the latter is used to study the energy funneling from the PF side chains to the P3HT backbone. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1252–1258     

Synthesis and characterization of polyphenylenes with polypeptide and poly(ethylene glycol) side chains

We report a novel approach for fabrication of multifunctional conjugated polymers, namely poly(p‐phenylene)s (PPPs) possessing polypeptide (poly‐l ‐lysine, PLL) and hydrophilic poly(ethylene glycol) (PEG) side chains. The approach is comprised of the combination of Suzuki coupling and in situ N‐carboxyanhydride (NCA) ring‐opening polymerization (ROP) processes. First, polypeptide macromonomer was prepared by ROP of the corresponding NCA precursor using (2,5‐dibromophenyl)methanamine as an initiator. Suzuki coupling reaction of the obtained polypeptide and PEG macromonomers both having dibromobenzene end functionality using 1,4‐benzenediboronic acid as the coupling partner in the presence of palladium catalyst gave the desired polymer. A different sequence of the same procedure was also employed to yield polymer with essentially identical structure. In the reverse sequence mode, low molar mass monomer (2,5‐dibromophenyl)methanamine, and PEG macromonomer were coupled with 1,4‐benzenediboronic acid in a similar way followed by ROP of the L‐Lysine NCA precursor through the primary amino groups of the resulting polyphenylene. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1785–1793     

Poly(oxanorbornenedicarboximide)s dendronized with amphiphilic poly(alkyl ether) dendrons

Attaching dendritically branched side chains to each repeat unit of a linear polymer produces molecular building blocks of nanometer‐sized dimensions called dendronized polymers. The structure of these complex molecular architectures is highly tunable and, therefore, of interest for a wide range of potential applications. The first examples of dendronized polymers prepared by living ring‐opening metathesis polymerization of oxanorbornenedicarboximide macromonomers with poly(alkyl ether) dendrons are reported. Small‐angle X‐ray scattering experiments on bulk samples confirm that the diameter of the individual cylindrical polymers can be tailored by the choice of dendron generation or the length of the hydrocarbon peripheral group. Analysis of the SAXS data based on a core‐shell model indicates that although the diameter of the cylinder increases with generation, the size of the core does not change; this suggests that these dendrons only loosely encapsulate the polymer backbone. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3221–3239     

Energy transfer along a sequence controlled hybrid polymer

The present work provides an ideal model for intra‐chain energy transfer study in conjugated polymer through shielding the polymer backbone by using bulky polyhedral oligomeric silsesquioxanes (POSS). POSS provides a circumference shielding of the polymer backbone to prevent closed packing of the polymer chains, allowing the intra‐chain energy transfer dominating in large concentration range. Bi‐functional POSS (B‐POSS) is specially designed to separate donor (fluorene) and acceptor (benzothiadiazole) within the polymer chain. The dynamics of energy transfer in poly(fluorene‐POSS‐alt‐POSS‐benzothiodiazole) (PTBtTbOFl₃) is studied by steady state as well as time resolved fluorescence spectroscopy at different donor/acceptor ratios. Results reveal that POSS can effectively shield inter‐chains energy transfer of the polymers, suggesting it is an effective model for energy transfer study with less inter‐chains effects. PTBtTbOFl₃ works as a chemosensors is also reported in the detection of explosive derivatives. These results provide insights for optimizing nanostructured materials for use in optoelectronic devices. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1225–1233     

Synthesis and morphological characterization of poly(ϵ-caprolactone) and poly(2-methyloxazoline) substituted phenyl rings and phenylene oligomers

Poly(ϵ-caprolactone) (PCL) and poly(2-methyloxazoline) (POx) substituted phenyl rings (macromonomers) and the corresponding substituted polyphenylene oligomers have been synthesized in various chemical structures. Macromonomers were synthesized by ring opening polymerization. Poly(phenylene) oligomers were then synthesized by cross-coupling of the macromonomers in Ni-catalyzed polycondensation reactions. The macromonomers and oligomers have been characterized by ¹H-NMR, IR, GPC, and DSC. The effect of side chain chemistry and architecture on the resulting morphology in thin films has been investigated by atomic force micro-scopy and wide angle X-ray scattering. Polyphenylene oligomers showed layered morphologies in thin films. The orientation of the layers depended on the chemistry of the side chains and the backbone architecture. Linear oligomers containing statistically distributed segments having POx or PCL side chains showed layers perpendicular to the underlying substrate. Attachment of polystyrene end block to PCL chain together with the meta-connectivity of the backbone resulted in layers parallel to the substrate. Our results also indicate that substitution of polymeric chains to phenyl rings can induce ordered structures of macromonomers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2091–2104, 2007     

Conjugated polymer with rigid donor poly(para‐divinylphenylamino) backbone and pendant cyanoacetic acid acceptor for dye sensitized solar cells

A donor backbone [poly(para‐divinylphenylamino)]‐acceptor (cyanoacetic acid side group) type conjugated polymer ( P2 ) has been synthesized and used as the active material for dye‐sensitized solar cells. DFT calculation shows that the insertion of vinyl link in the polymer backbone leads to a planar structure in P2 and changes the excited state significantly. Photoelectrochemical cells based on the DSSC format were fabricated using the polymers as sensitizers. The cell constructed using P2 exhibits a considerably high peak IPCE and J‐V response, with an overall power conversion efficiency of 3.67%. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2958–2965     

Synthesis of well‐defined comb‐like graft (co)polymers by nucleophilic substitution reaction between living polymers and polyhalohydrocarbon

A series of graft (co)polymers were synthesized by nucleophilic substitution reaction between iodinated 1,2‐polybutadiene (PB‐I, backbone) and living polymer lithium (side chains). The coupling reaction between PB‐I and living polymers can finish within minutes at room temperature, and high conversion (up to 92%) could be obtained by effectively avoiding side reaction of dimerization when living polymers were capped with 1,1‐diphenylethylene. By virtue of living anionic polymerization, backbone length, side chain length, and side chain composition, as well as graft density, were well controlled. Tunable molecular weight of graft (co)polymers with narrow molecular weight distribution can be obtained by changing either the lengths of side chain and backbone, or the graft density. Graft copolymers could also be synthesized with side chains of multicomponent polymers, such as block polymer (polystyrene‐b‐polybutadiene) and even mixed polymers (polystyrene and polybutadiene) as hetero chains. Thus, based on living anionic polymerization, this work provides a facile way for modular synthesis of graft (co)polymers via nucleophilic substitution reaction between living polymers and polyhalohydrocarbon (PB‐I). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Morphological studies of blends of conjugated polymers and acceptor molecules using langevin dynamics simulations

We use coarse‐grained Langevin dynamics simulations of blends of generic conjugated polymers and acceptor molecules to show how architecture (e.g., side chains, backbone flexibility of oligomers) and the pair‐wise interactions between the constituents of the blend affect morphology and phase transition. Alkyl side chains on the conjugated oligomer backbones shift the liquid crystal (LC) transition temperature from that of bare conjugated backbones and the direction of the shift depends on backbone–backbone interactions. Rigid backbones and constrained side chains cause a layer‐by‐layer morphology of conjugated polymers and amorphous acceptors, whereas flexible backbones and unconstrained side chains facilitate highly ordered acceptor arrangement. Strong backbone–backbone attraction shifts LC transition to higher temperatures than weak backbone–backbone attraction, and strong acceptor–acceptor attraction increases acceptor aggregation. Pure macro‐phase separated domains form when all pair‐wise interactions in the blend are strongly attractive, whereas interconnected domains form at intermediate acceptor–acceptor attraction and strong polymer–polymer attractions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Synthesis and polymerization of first‐generation dendritic methacrylate macromonomers

First‐generation dendritic macromonomers with a methacryloyl end group on one side, long alkyl chains on the other side, and a biuret system with two urethane groups in the core have been synthesized. The synthesis comprises three steps with hexamethylene diisocyanate uretdione as the starting material. The branching points were introduced via biuret groups and the prepared macromonomers were polymerized by free and controlled radical polymerization. Depending on the reaction conditions linear dendronized polymers as well as branched dendronized polymers and microgels with long alkyl chains were obtained. Scanning force microscopy was used to visualize high molecular weight molecules spincoated on highly oriented pyrolytic graphite. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 614–628, 2007