Quantitative Description of Structural Effects on the Stability of Gold(I) Carbenes

The gas‐phase bond‐dissociation energies of a SO₂–imidazolylidene leaving group of three gold(I) benzyl imidazolium sulfone complexes are reported (E₀=46.6±1.7, 49.6±1.7, and 48.9±2.1 kcal mol^?1). Although these energies are similar to each other, they are reproducibly distinguishable. The energy‐resolved collision‐induced dissociation experiments of the three [L]–gold(I) (L=ligand) carbene precursor complexes were performed by using a modified tandem mass spectrometer. The measurements quantitatively describe the structural and electronic effects a p‐methoxy substituent on the benzyl fragment, and trans [NHC] and [P] gold ligands, have towards gold carbene formation. Evidence for the formation of the electrophilic gold carbene in solution was obtained through the stoichiometric and catalytic cyclopropanation of olefins under thermal conditions. The observed cyclopropane yields are dependent on the rate of gold carbene formation, which in turn is influenced by the ligand and substituent. The donation of electron density to the carbene carbon by the p‐methoxy benzyl substituent and [NHC] ligand stabilizes the gold carbene intermediate and lowers the dissociation barrier. Through the careful comparison of gas‐phase and solution chemistry, the results suggest that even gas‐phase leaving‐group bond‐dissociation energy differences of 2–3 kcal mol^?1 enormously affect the rate of gold carbene formation in solution, especially when there are competing reactions. The thermal decay of the gold carbene precursor complex was observed to follow first‐order kinetics, whereas cyclopropanation was found to follow pseudo‐first‐order kinetics. Density‐functional‐theory calculations at the M06‐L and BP86‐D3 levels of theory were used to confirm the observed gas‐phase reactivity and model the measured bond‐dissociation energies.     

Synthesis, spectroscopic characterization and electronic structure of some new Cu(I) carbene complexes

Reaction of oligomeric Cu(I) complexes [Cu(Μ-S-C(=NR)(O-Ar-CH₃)]_n with Lewis acids gave Cu(I) carbene complexes, which were characterized by¹H and¹³C NMR spectroscopy. Cu(I) carbene complexes could be directly generated from RNCS, Cu(I)-OAr and Lewis acids; this method can be used to prepare Cu(I) carbene complexes with different substitutents on the carbene carbon. The complexes were unreactive towards olefins and do not undergo cyclopropanation. Electronic structure calculations (DFT) show that the charge on the carbene carbon plays an important role in controlling the reactivity of the carbene complex.     

Elevated Catalytic Activity of Ruthenium(II)–Porphyrin‐Catalyzed Carbene/Nitrene Transfer and Insertion Reactions with N‐Heterocyclic Carbene Ligands

Bis(NHC)ruthenium(II)–porphyrin complexes were designed, synthesized, and characterized. Owing to the strong donor strength of axial NHC ligands in stabilizing the trans M?CRR′/M?NR moiety, these complexes showed unprecedently high catalytic activity towards alkene cyclopropanation, carbene C? H, N? H, S? H, and O? H insertion, alkene aziridination, and nitrene C? H insertion with turnover frequencies up to 1950 min^?1. The use of chiral [Ru(D₄‐Por)(BIMe)₂] ( 1 g ) as a catalyst led to highly enantioselective carbene/nitrene transfer and insertion reactions with up to 98 % ee. Carbene modification of the N terminus of peptides at 37 °C was possible. DFT calculations revealed that the trans axial NHC ligand facilitates the decomposition of diazo compounds by stabilizing the metal–carbene reaction intermediate.     

Reactivity of the inversely polarized phosphaalkenes RP=C(NMe2)2 (R = tBu, Me3Si, H) towards arylcarbene complexes [(CO)5M=C(oEt)Ar] (Ar= Ph, M = Cr, W; Ar = 2-MeC6H4, 2-MeOC6H4, M = W)

The reaction of the arylated Fischer carbene complexes [(CO)5M=C(OEt)Ar] (Ar=Ph; M = Cr, W; 2-MeC6H4; 2-MeOC6H; M = W) with the phosphaalkenes RP=C(NMe2), (R=tBu, SiMe3) afforded the novel phosphaalkene complexes [[RP=C(OEt)Ar]M(CO)5] in addition to the compounds [(RP=C(NMe2)2]M(CO)5]. Only in the case of the R = SiMe3 (E/Z) mixtures of the metathesis products were obtained. The bis(dimethylamino)methylene unit of the phosphaalkene precursor was incorporated in olefins of the type (Me2N)2C=C(OEt)(Ar). Treatment of [(CO)5W=C(OEt)(2-MeOC6H4)] with HP=C(NMe2)2 gave rise to the formation of an E/Z mixture of [[(Me2N)2CH-P=C(OEt)(2-MeOC6H4)]W(CO)5] the organophosphorus ligand of which formally results from a combination of the carbene ligand and the phosphanediyl [P-CH(NMe2)2]. The reactions reported here strongly depend on an inverse distribution of alpha-electron density in the phosphaalkene precursors (Pdelta Cdelta+), which renders these molecules powerfu] nucleophiles.     

Heterobi‐ and ‐trinuclear Complexes with an Amino(ethynyl)carbene as Bridging Ligand

The sequential reaction of the amino(trimethylsilyl)carbene complex [(CO)₅W=C(NH₂)C≡CSiMe₃] ( 1 ) with nBuLi and [I‐Fe(CO)₂Cp] affords the C(carbene)‐N bridged heterobinuclear complex [(CO)₅W=C{NHFe(CO)₂Cp}C≡CSiMe₃] ( 2 ). Desilylation of 1 is achieved by treatment with KF in THF/MeOH. From the reaction of the resulting complex [(CO)₅W=C(NH₂)C≡CH] ( 3 ) with nBuLi and [I‐Fe(CO)₂Cp] two binuclear WFe compounds in a ratio of approximately 1:1 are obtained: the C(carbene)‐C≡C bridged complex 4 and the C(carbene)‐N bridged complex 5 . Repetition of the deprotonation/metallation sequence yields the trinuclear WFe₂ complex 6 . One Fe(CO)₂Cp fragment in 6 is bonded to the amino group and the other one to the terminal carbon atom of the ethynyl substituent. The analogous reaction of 3 with nBuLi and [Br‐Ni(PMe₂Ph)₂Mes] gives a ca. 1:1 mixture of two heterobinuclear complexes ( 7 and 8 ). Complex 7 is bridged by the C(carbene)‐C≡C and complex 8 by the C(carbene)‐N fragment. Subsequent reaction of 7 with BuLi and [Br‐Ni(PMe₂Ph)₂Mes] finally affords the trinuclear WNi₂ complex 9 related to 6 . The solid‐state structure of 2 is established by an X‐ray diffraction analysis. The spectroscopic data of the bi‐ and trinuclear complexes indicate electronic communication between the metal centers through the bridging group.     

Gold(I) Carbenoids: On‐Demand Access to Gold(I) Carbenes in Solution

Chloromethylgold(I) complexes of phosphine, phosphite, and N ‐heterocyclic carbene ligands are easily synthesized by reaction of trimethylsilyldiazomethane with the corresponding gold chloride precursors. Activation of these gold(I) carbenoids with a variety of chloride scavengers promotes reactivity typical of metallocarbenes in solution, namely homocoupling to ethylene, olefin cyclopropanation, and Buchner ring expansion of benzene.     

Coordination chemistry of organometallic polydentate ligand Reactive chemistry of the tridentate ligand trans‐Fe(Ph2PQu‐P)2‐(CO)3 [PhzPQu=2‐diphenyl‐phosphino‐4‐methylquinoline] and molecular structure of [Fe(CO)3(μ‐Ph2PQu)2HgI]+ [HgI3]

Reaction of a new type of bidentate ligand PhPQu [PhPQu = 2‐diphenylphosphino‐4‐methylquinoline] with Fe(CO)₅ in butanol gave trans‐Fe(FpPQu‐P)(CO)₃ (1). Compound 1, which can act as a neutral tridentate organometallic ligand, was reacted with I B, II B metal compounds and a rhodium complex to give six binuclear complexes with Fe? M bonds, Fe(CO)₃ (μ‐Ph₂PQu)MX_n (2–7) [M= Zn(II), Cd(II), Hg(II), Cu(I), Ag(I), Rh(I)], and an ion‐pair complex [Fe(CO)₃ (μ‐Ph₂PQu)₂HgI][HgI₃]^? (8). The structure of 8 was determined by X‐ray crystallography. Complex 8 crystallizes in the space group P‐1 with a = 1.0758(3), b = 1.6210(4), c=1.7155(4)nm; a=75.60(2), β=71.81(2), γ=81.78(2)° and Z = 2 and its structure was refined to give agreement factors of R=0.050 and R_w = 0.057. The Fe‐Hg bond distance is 0.2536nm.     

Perfluormethyl-Element-Liganden. XXIX. Darstellung und spektroskopische Untersuchungen von M(CO)4L2-Komplexen (M = Cr,Mo, W; L = Me2PSMe,Me2PSeMe, (CF3)2PSMe, (CF3)2PSeMe)

Perfluoromethyl Element Ligands. XXIX. Preparation and Spectroscopic Investigation of M(CO)₄L₂ Complexes (M ? Cr, Mo, W; L ? Me₂PSMe, Me₂PSeMe, (CF₃)₂PSMe, (CF₃)₂PSMe) The complexes M(CO)₄L₂ (see Inhaltsübersicht) have been prepared by the reaction of tetracarbonyl norbornadiene metal compounds M(CO)₄NBD with L at room temperature or 35°C, respectively. The cis-complexes formed in the first step undergo rearrangement to trans-isomers at higher temperatures. New compounds have been characterized by analytical and spectroscopic (IR, NMR, MS) methods.     

Theoretical analysis of the reaction pathway and the effect of the axial ligand for 3-oxobutylideneaminatocobalt(II)-catalyzed cyclopropanation

[structure: see text] The reaction pathway of the cyclopropanation catalyzed by the 3-oxobutylideneaminatocobalt(II) complex was analyzed by the density functional method to reveal that the axial donor ligand produced two prominent effects. One is that the activation energy for the formation of the cobalt carbene complex was reduced and that the activation energy for the cyclopropanation step was increased. The other is that the distance of the carbene carbon above the ligand plane was shortened during the cyclopropanation step.     

Diamino‐Substituted Carbene Transfer between Transition Metal Ions

Diamino‐carbene ligand transfer between various metalions is studied, particularly with Pd (II) to Rh(I), Rh(I) to Au(I). Reactions of various carbene complexes with AgPF₆ result in the cleavage of the M=C bond to give the protonated carbene species, imidazolidin‐2‐ylidinium salt, indicating the presence of free carbene ligand in the reaction medium. When the carbene transfer process was carried out in tetrahydrofuran, the polymerization of tetrahydrofuran occurred.     

Nitrile‐functionalized Hg(II)‐ and Ag(I)‐N‐heterocyclic carbene complexes: synthesis,crystal structures,nuclease and DNA binding activities

Various nitrile‐functionalized benzimidazol‐2‐ylidene carbene complexes of Hg(II) and Ag(I) were synthesized by the interaction of 1‐benzyl/1‐butyl‐3‐(cyano‐benzyl)‐3 H‐benzimidazol‐1‐ium mono/dihexafluorophosphate with Hg(OAc)₂/Ag₂O in acetonitrile. Two of the benzimidazolium salts were structurally characterized by single crystal X‐ray diffraction technique. Structures of reported compounds were characterized by ¹ H, ¹³C NMR, FT‐IR, UV–visible spectroscopic techniques, and molar conductivity and elemental analyses. For bis‐benzimidazolium salt, dinuclear Hg(II)– and Ag(I)–carbene complexes were obtained. Nuclease activity and binding interactions of the synthesized benzimidazolium salts and their Ag(I)–carbene complexes with DNA were studied using agarose gel electrophoresis and, absorption spectroscopy and viscosity measurements, respectively. Ag(I)–carbene complexes showed higher DNA binding activity compared to their respective benzimidazolium salts. However, a benzimidazolium salt and two of the Ag(I) complexes showed remarkably higher nuclease activity both, in the presence and absence of an oxidizing agent. Copyright © 2012 John Wiley & Sons, Ltd.     

Pd‐Catalyzed Enantioselective Ring Opening/Cross‐Coupling and Cyclopropanation of Cyclobutanones

A palladium‐catalyzed enantioselective sequential ring‐opening/cross‐coupling of cyclobutanones is disclosed that provides chiral indanones bearing C3‐quaternary stereocenters. The reaction process involves palladium‐catalyzed nucleophilic addition of cyclobutanones and aryl halides, enantioselective β‐carbon elimination, and intermolecular trapping of a transient σ‐alkylpalladium complex with boronic acids. Alternatively, an intramolecular cyclopropanation is realized through C?H bond functionalization in the absence of external coupling reagents, affording chiral cyclopropane‐fused‐indanones in good yields and enantioselectivity.     

Übergangsmetall-substituierte Acylphosphane und Phosphaalkene. 22 [1] Insertionen von Hexafluoraceton in die PX-Bindung von Metallophosphanen des Typs (η5-C5Me5)(CO)2M?PX2 (M = Fe,Ru; X = Me3Si,Cl). Strukturbestimmung von (η5-C5Me5)(CO)2Fe?P(SiMe3)C(CF3)2(OSiMe3)

Transition Metal-substituted Acylphosphanes and Phosphaalkenes. 22. Insertions of Hexafluoroacetone into the PX-Bond of Metallophosphanes (η⁵-C₅Me₅)(CO)₂M? PX₂ (M = Fe, Ru; X = Me₃Si, Cl). Structure Determination of (η⁵-C₅Me₅)(CO)₂Fe? P(SiMe₃)C(CF₃)₂(OSiMe₃) Reaction of the metallophosphanes (η⁵-C₅Me₅)(CO)₂M? P(SiMe₃)₂ ( 1a : M = Fe; 1b : M = Ru) with hexafluoroacetone (HFA) afforded the complexes (η⁵-C₅Me₅)(CO)₂M? P(SiMe₃)C(CF₃)₂(OSiMe₃) ( 2a, b ). The attempted synthesis of a metallophosphaalkene from 2a by thermal elimination of hexamethyldisiloxane failed. The acid catalyzed hydrolysis of 2a afforded compound (η⁵-C₅Me₅) · (CO)₂Fe? P(H)C(CF₃)₂(OSiMe₃) ( 3 ). Hexafluoracetone and (η⁵-C₅Me₅)(CO)₂Fe? PCl₂ ( 4 ) under-went reaction to give the metallochlorophosphan (η⁵-C₅Me₅) · (CO)₂Fe? P(Cl)? O? C(CF₃)₂Cl ( 5 ). Constitutions and configurations of the compounds ( 2–5 ) were established by elemental analyses and spectroscopic data (IR, ¹H-, ¹³C, ¹⁹F-, ²⁹Si-, ³¹P-NMR, MS). The molecular structure of 2a was determined by x-ray diffraction analysis.     

Novel Transition‐Metal (M=Cr,Mo, W,Fe) Carbonyl Complexes with Bis(guanidinato)silicon(II) Ligands

The donor‐stabilized silylene 2 (the first bis(guanidinato)silicon(II ) complex) reacts with the transition‐metal carbonyl complexes [M(CO)₆] (M=Cr, Mo, W) to form the respective silylene complexes 7 – 10 . In the reactions with [M(CO)₆] (M=Cr, Mo, W), the bis(guanidinato)silicon(II ) complex 2 behaves totally different compared with the analogous bis(amidinato)silicon(II ) complex 1 , which reacts with [M(CO)₆] as a nucleophile to replace only one of the six carbonyl groups. In contrast, the reaction of 2 leads to the novel spirocyclic compounds 7 – 9 that contain a four‐membered SiN₂C ring and a five‐membered MSiN₂C ring with a M?Si and M?N bond (nucleophilic substitution of two carbonyl groups). Compounds 7 – 10 were characterized by elemental analyses (C, H, N), crystal structure analyses, and NMR spectroscopic studies in the solid state and in solution.     

Theoretical (DFT) insights into the mechanism of copper-catalyzed cyclopropanation reactions. Implications for enantioselective catalysis

The mechanism of the copper(I)-catalyzed cyclopropanation reaction has been extensively investigated for a medium-size reaction model by means of B3LYP/6-31G(d) calculations. The starting ethylene complex of the N,N'-dimethylmalonaldiimine--copper (I) catalyst undergoes a ligand exchange with methyl diazoacetate to yield a reaction intermediate, which subsequently undergoes nitrogen extrusion to generate a copper--carbene complex. The cyclopropanation step takes place through a direct carbene insertion of the metal--carbene species to yield a catalyst--product complex, which can finally regenerate the starting complex. The stereochemical predictions of a more realistic model (by considering a chiral bis(oxazoline)--copper (I) catalyst) have been rationalized in terms of steric repulsions, showing good agreement with experimental data.     

Investigation of structural and biological properties of N-heterocyclic carbene silver(I) and palladium(II) complexes

abstract

Computational investigations were done on bis(1-allyl-3-benzyl-2,3-dihydro-1H-benzo[d]imidazol-2-yl)silver(I), bis(1-benzyl-3-butyl-2,3-dihydro-1H-benzo[d]imidazol-2-yl)silver(I), bis(1-allyl-3-benzyl-2,3-dihydro-1H-benzo[d]imidazol-2-yl)dibromidepalladium(II), and bis(1-benzyl-3-butyl-2,3-dihydro-1H-benzo[d]imidazol-2-yl)dibromidepalladium(II) complexes. Related complexes were optimized at different six calculation levels which are HF/6-31G(LANL2DZ), HF/6-31G(d,p)(LANL2DZ), B3LYP/6-31G(LANL2DZ), B3LYP/6-31G(d,p)(LANL2DZ), M062X/6-31G(LANL2DZ) and M062X/6-31G(d,p)(LANL2DZ) levels in vacuo. IR and NMR spectrum are calculated and examined in detail. Energy diagram of molecular orbitals, contour diagram of frontier molecular orbitals, molecular electrostatic potential maps and the harmonic surface of related molecules are examined in detail. Finally, interactions between mentioned complexes and related proteins (1BNA, 1JNX, and 2ING) are investigated in detail. As a result, it is found that biological and anti-cancer properties of silver N-heterocyclic carbene complexes are higher than those of palladium complexes.     

Stable ‐ESiMe3 Complexes of CuI and AgI (E=S,Se) with NHCs: Synthons in Ternary Nanocluster Assembly

As a part of efforts to prepare new “metallachalcogenolate” precursors and develop their chemistry for the formation of ternary mixed‐metal chalcogenide nanoclusters, two sets of thermally stable, N‐heterocyclic carbene metal–chalcogenolate complexes of the general formula [(IPr)Ag?ESiMe₃] (IPr=1,3‐bis(2,6‐diisopropylphenyl)imidazolin‐2‐ylidene; E=S, 1 ; Se, 2 ) and [(iPr₂‐bimy)Cu?ESiMe₃]₂ (iPr₂‐bimy=1,3‐diisopropylbenzimidazolin‐2‐ylidene; E=S, 4 ; Se, 5 ) are reported. These are prepared from the reaction between the corresponding carbene metal acetate, [(IPr)AgOAc] and [(iPr‐bimy)CuOAc] respectively, and E(SiMe₃)₂ at low temperature. The reaction of [(IPr)Ag?ESiMe₃] 1 with mercury(II) acetate affords the heterometallic complex [{(IPr)AgS}₂Hg] 3 containing two (IPr)Ag?S^? fragments bonded to a central Hg^II, representing a mixed mercury–silver sulfide complex. The reaction of [(iPr₂‐bimy)Cu‐SSiMe₃]₂, which contains a smaller N‐heterocyclic‐carbene, with mercuric(II) acetate affords the high nuclearity cluster, [(iPr₂‐bimy)₆Cu₁₀S₈Hg₃] 6 . The new N‐heterocyclic carbene metal–chalcogenolate complexes 1 , 2 , 4 , 5 and the ternary mixed‐metal chalcogenolate complex 3 and cluster 6 have been characterized by multinuclear NMR spectroscopy (¹H and ¹³C), elemental analysis and single‐crystal X‐ray diffraction.     

Reactions of rac‐(ebthi)M(η2‐Me3SiC2SiMe3) (M=Ti,Zr) with Aryl Nitriles

The reactions of the Group 4 metallocene alkyne complexes rac‐(ebthi)M(η²‐Me₃SiC₂SiMe₃) ( 1 a : M=Ti, 1 b : M=Zr; rac‐(ebthi)=rac‐1,2‐ethylene‐1,1′‐bis(η⁵‐tetrahydroindenyl)) with Ph?C?N were investigated. For 1 a , an unusual nitrile–nitrile coupling to 1‐titana‐2,5‐diazacyclopenta‐2,4‐diene ( 2 ) at ambient temperature was observed. At higher temperature, the C?C coupling of two nitriles resulted in the formation of a dinuclear complex with a four‐membered diimine bridge ( 3 ). The reaction of 1 b with Ph?C?N afforded dinuclear compound 4 and 2,4,6‐triphenyltriazine. Additionally, the reactivity of 1 b towards other nitriles was investigated.     

Rhodium(I)‐Catalyzed Sequential C(sp)C(sp3) and C(sp3)C(sp3) Bond Formation through Migratory Carbene Insertion

A Rh^I‐catalyzed three‐component reaction of tert‐propargyl alcohol, diazoester, and alkyl halide has been developed. This reaction can be considered as a carbene‐involving sequential alkyl and alkynyl coupling, in which C(sp)? C(sp³) and C(sp³)? C(sp³) bonds are built successively on the carbenic carbon atom. The Rh^I‐carbene migratory insertion of an alkynyl moiety and subsequent alkylation are proposed to account for the two separate C? C bond formations. This reaction provides an efficient and tunable method for the construction of all‐carbon quaternary center.     

Reactions of Iron Carbenes with α,β‐Unsaturated Esters by Using an Umpolung Approach: Mechanism and Applications

An Umpolung approach, in which a phosphorus ylide moiety was introduced to increase the electron density of the double bond, was developed to activate electron‐deficient alkenes for reaction with electrophilic iron carbenes. In tandem with the Wittig reaction, the reactions of α,β‐unsaturated esters with in situ generated Fe? carbene complexes delivered formal C? H insertion products through cyclopropanation/ring‐opening reactions. DFT calculations and cross‐experiments indicate that, in this process, the ring opening of the cyclopropylmethyl ylide intermediate is rapid and reversible and the subsequent proton transfer is the rate‐determining step. Further studies revealed that, based on the choice of the ylide and ester groups, as well as the base, the reaction could be steered towards either the ring‐opening pathway or to the production of vinyl cyclopropanes.