Synthesis and structure‐activity relationship of several aromatic ketone‐based two‐photon initiators

Several novel aromatic ketone‐based two‐photon initiators containing triple bonds and dialkylamino groups were synthesized and the structure‐activity relationships were evaluated. Branched alkyl chains were used at the terminal donor groups to improve the solubility in the multifunctional monomers. Because of the long conjugation length and good coplanarity, the evaluated initiators showed large two‐photon cross section values, while their fluorescence lifetimes and quantum yields strongly depend on the solvent polarity. All novel initiators exhibited high activity in terms of two‐photon‐induced microfabrication. This is especially true for fluorenone‐based derivatives, which displayed much broader processing windows than well‐known highly active initiators from the literature and commercially available initiators. While the new photoinitiators gave high reactivity in two‐photon‐induced photopolymerization at concentration as low as 0.1% wt, these compounds are surprisingly stable under one photon condition and nearly no photo initiation activity was found in classical photo DSC experiment. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Overcoming the oxygen inhibition in the photopolymerization of acrylates: A study of the beneficial effect of triphenylphosphine

Triphenylphosphine (TPP) was used in free‐radical UV‐curable resins to reduce oxygen inhibition effect. The relative influence of concentration, monomer viscosity, light intensity and sample thickness on TPP efficiency was investigated by real time infrared spectroscopy. It is shown that TPP is an effective oxygen scavenger. The mechanism was investigated by means of Laser Flash Photolysis. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2462–2469, 2010     

Photopolymerization of 2‐hydroxyethyl methacrylate: Effect of the medium properties on the polymerization rate

The effect of solvent properties on the polymerization rate of 2‐hydroxyethyl methacrylate (HEMA) was examined with the photoreaction of 4,4′‐azobis(2‐amidinopropane) and photoinduced electron transfer of a thioxanthone derivative and triethanolamine as the radical source. The polymerization rate of HEMA was markedly affected by pH and the medium polarity. The rate increased over a pH range of 6–8. The dependence of the polymerization rate on the amine concentration photoinitiated by the bimolecular system was different in water and acetonitrile as solvents. In aqueous medium, pH 9.5, the rate increased with the amine concentration reaching a constant value at 0.025 M amine; further amine addition inhibited the polymerization. In organic media the inhibition effect was not observed. Triethanolamine addition did not change the polymerization rate photoinitiated by the azo compound. Photochemical studies of the thioxanthone were carried out under the polymerization conditions. These studies allowed us to simulate the dependence of the polymerization rate on the amine concentration. The results are explained in terms of the interaction of the ketone excited states with the amine in the different media. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2368–2373, 2003     

Photopolymerization of biocompatible phosphorus‐containing vinyl esters and vinyl carbamates

Phosphorus‐containing vinyl esters and vinyl carbamates were synthesized as new biocompatible and degradable photopolymers. Reactivity of the monomers with one, two, and three polymerizable double bonds was evaluated by photo‐differential scanning calorimetry. With respect to their potential application in the biomedical field, studies on cytotoxicity, mechanical stability, and hydrolytic erosion behavior of the poly(vinyl alcohol)‐based derivatives were performed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2916–2924, 2010     

Visible‐Light Emulsion Photopolymerization of Styrene

The photopolymerization of styrene in emulsion is achieved in a conventional double‐wall reactor equipped with a LED ribbon coiled around the external glass wall. Styrene mixed to acridine orange is added to the water phase containing sodium dodecyl sulfate, a water‐soluble N‐heterocyclic carbene–borane and disulfide, and irradiated. Highly stable latexes are obtained, with particles up to a diameter of 300 nm. The ability to reach such large particle sizes via a photochemical process in a dispersed medium is due to the use of visible light: the photons in the visible range are less scattered by larger objects and thus penetrate and initiate better the polymerizations. They are also greener and cheaper to produce via LEDs, and much safer than UVs. The method presented does not require any specific glassware; it works at lower temperature and delivers larger particles compared to thermal processes at similar solids contents and surfactant concentrations.     

Photopolymerization of 1,6‐hexanedioldiacrylate initiated by three‐component systems based on N‐arylphthalimides

Three‐component photoinitiators comprised of an N‐arylphthalimide, a diarylketone, and a tertiary amine were investigated for their initiation efficiency of acrylate polymerization. The use of an electron‐deficient N‐arylphthalimide resulted in a greater acrylate polymerization rate than an electron‐rich N‐arylphthalimide. Triplet energies of each N‐arylphthalimide, determined from their phosphorescence spectra, and the respective rate constants for triplet quenching by the N‐arylphthalimide derivatives (acquired via laser flash photolysis) indicated that an electron–proton transfer from an intermediate radical species to the N‐arylphthalimide (not energy transfer from triplet sensitization) is responsible for generating the initiating radicals under the conditions and species concentrations used for polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4009–4015, 2004     

A qualitative and quantitative post‐mortem analysis: Studying free‐radical initiation processes via soft ionization mass spectrometry

The current article contains a review of the electrospray ionization‐mass spectrometry characterization of polymers prepared via thermal‐ and photoinitiation processes. The used analysis method permits direct access to detailed endgroup information. For a qualitative and quantitative endgroup analysis, sophisticated methods have been developed which provide a detailed image of the incorporation propensity of thermally as well as photolytically generated radicals at the polymer chain termini. Such a post‐mortem analysis of polymeric materials specifically allows for the quantification of the ability of radical fragments to initiate polymerization processes. Herein, the most recent progress in the field of mass spectrometric radical reactivity mapping is outlined and open questions as well as future directions are discussed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

UV Laser‐Induced Gas‐Phase Copolymerization of Carbon Disulfide and Ethene

Summary: The laser irradiation at 193 nm of a gaseous mixture of carbon disulfide and ethene induces the copolymerization of both compounds and affords the chemical vapour deposition of a C/S/H polymer, the composition of which indicates the reaction between two to three CS₂ molecules and one C₂H₄ molecule. Polymer structure is interpreted on the basis of X‐ray photoelectron and FT‐IR spectra as consisting of >CS, >CC<,  CH₂ CH₂ , (CC)S_nC_{4 − n},  C (CS) S ,  S (CS) S , and C S S C configurations. The gas‐phase copolymerization of carbon disulfide and ethene represents the first example of such a reaction between carbon disulfide and a common monomer.

Scheme showing the expected reaction of excited CS₂ molecules with other CS₂ molecules to form dimers, which then react with another CS₂ molecule or add to ethene.     

Synthesis and evaluation as a visible‐light polymerization photoinitiator of a new dye‐linked bis(trichloromethyl)‐1,3,5‐triazine

A dye‐linked initiator consisting of a merocyanine dye, which has an absorption maximum at 460 nm, and a substituted bis(trichloromethyl)‐1,3,5‐triazine initiator was prepared in order to achieve an efficient photopolymerization in a visible‐light region. The spectroscopic studies clearly showed that the dye‐linked initiator exhibit a marked increase in the efficiency of fluorescence quenching than a simple mixture of the dye/initiator. These results are reasonably explained in terms of the efficiency of electron transfer between the dye and the initiator. The relative photoinitiating efficiency of dye‐linked initiators in photopolymerization of acrylate monomers was evaluated and the results clearly indicated that the dye‐linked photoinitiator exhibited a marked increase in the photoinitiating efficiency of photopolymerization of acrylates compared to a simple mixture of the dye/initiator in photopolymer coatings particularly at a lower concentration of the initiator. This was explained in terms of the active quenching sphere of the dye/initiator system. Superior photosensitivity in the linked compound at a lower concentration indicates that this would be particularly useful as a visible‐light photoinitiator in holographic‐recording photopolymers. Copyright © 2004 John Wiley & Sons, Ltd.     

Radical and cationic photopolymerization: New pyrylium and thiopyrylium salt‐based photoinitiating systems

New thiopyrylium and pyrylium salt‐based photoinitiating systems for visible light induced free radical polymerization (FRP) or free radical promoted cationic polymerization (FRPCP) under visible lights are presented. The reaction mechanisms are investigated by laser flash photolysis and the structure/reactivity trend is discussed. The abilities of two different classes of coinitiators are investigated (thiols/disulfides and silanes). In FRP, upon irradiation with a xenon lamp (λ > 390 nm), the (thio)pyrylium salts in combination with thiols or disulfides lead to very high polymerization rates, compared to the reference eosin Y/methyldiethanolamine system. In FRPCP, silanes are found much better coinitiators: a high efficiency of the photopolymerization under air is noted. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7369–7375, 2008     

New polymer‐chemical developments in clinical dental polymer materials: Enamel–dentin adhesives and restorative composites

In the past 10 years, many new components were synthesized and evaluated for an application in enamel–dentin adhesives and direct composite restoratives. New bisacrylamide cross‐linkers with improved hydrolytic stability and new strongly acidic polymerizable phosphonic acids and dihydrogen phosphates, as well as novel photoinitator systems, in combination with the implementation of novel application devices, have significantly improved the performance of the current enamel–dentin adhesives. The currently used resins for direct composite restoratives are mainly based on methacrylate chemistry to this day. A continuous improvement of the properties of current composites was achieved with the use of new tailor‐made methacrylate cross‐linkers, new additives, and photoinitiators as well as tailor‐made fillers. Nowadays, dental adhesives and methacrylate‐based direct restorative materials have found wide‐spread acceptance. Nevertheless, future developments in the field of dental adhesives and direct composite restoratives will focus on improving durability and biocompatibility as well as the development of materials with a broader application spectrum and of smart adhesives or composites. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

One‐ and two‐photon activity of cross‐conjugated photoinitiators with bathochromic shift

Intrigued by the good performance of 1,5‐diphenylpenta‐1,4‐diyn‐3‐one ( DPD ) as photoinitiator for radical polymerization we prepared and investigated several donor substituted derivatives. UV‐Vis spectroscopy revealed a gradual red‐shift of λ_max and higher extinction in the order of the donor capability. A methoxy‐substituted derivative ( O‐DPD ) exhibited significant photoinitiation activity in photo‐DSC experiments. Steady state photolysis experiments showed decreased decomposition rates with increasing donor capability. A dimethylamino derivative N‐DPD was even photostable under these conditions. Because of to the D‐π‐A‐π‐D system of these compounds two‐photon induced 3D photopolymerization experiments were performed and N‐DPD showed outstanding performance compared to often applied single photon initiators. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3280–3291, 2007     

Star‐shaped Polymers through Simple Wavelength‐Selective Free‐Radical Photopolymerization

Star‐shaped polymers represent highly desired materials in nanotechnology and life sciences, including biomedical applications (e.g., diagnostic imaging, tissue engineering, and targeted drug delivery). Herein, we report a straightforward synthesis of wavelength‐selective multifunctional photoinitiators (PIs) that contain a bisacylphosphane oxide (BAPO) group and an α‐hydroxy ketone moiety within one molecule. By using three different wavelengths, these photoactive groups can be selectively addressed and activated, thereby allowing the synthesis of ABC‐type miktoarm star polymers through a simple, highly selective, and robust free‐radical polymerization method. The photochemistry of these new initiators and the feasibility of this concept were investigated in unprecedented detail by using various spectroscopic techniques.     

Dual stimuli‐responsive microgels based on photolabile crosslinker: Temperature sensitivity and light‐induced degradation

The synthesis and characterization of a new photocleavable crosslinker is presented here. Dual stimuli‐responsive P(VCL‐co‐NHMA) microgels were prepared by precipitation polymerization of vinylcaprolactam (VCL) with N‐hydroxymethyl acrylamide (NHMA) and the new crosslinker. The microgels had distinct temperature sensitivity as observed in the case of PVCL‐based particles and their volume phase transition temperature (VPTT) shifted to higher temperature with increasing NHMA content. Photolytic degradation experiments were investigated by irradiation with UV light, which led to microgel disintegration caused by cleavage of the photolabile crosslinking points. The degradation behavior of the microgels was conducted with respect to degradation rates by means of the relative turbidity changes. Hence, the microgels could totally degrade into short linear polymers by UV light, thus representing a great potential as new light and temperature dual responsive nanoscale materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1676–1685     

Photopolymerization kinetics of ionic liquid monomers derived from the neutralization reaction between trialkylamines and acid‐containing (meth)acrylates

Polymerizable ionic liquids were synthesized from the neutralization reaction between trialkylamines (tributylamine, trihexylamine, trioctylamine, 2‐(dimethyl‐amino)ethyl acrylate, and 2‐(dimethylamino)ethyl methacrylate) and acid‐containing (meth)acrylates to study the kinetics of their photopolymerization. The ionic liquids formed from acrylic acid and methacrylic acid with trialkylamines showed low or moderate increases in rate compared to their monofunctional analogues. The ionic liquids formed from (meth)acrylic acid and a tertiary amine with a pendant acrylate exhibited rates typical of traditional di(meth)acrylates, although the (meth)acrylates were not covalently attached to the same molecule. All of the phosphate‐based ionic liquids exhibited very rapid polymerization rates and strong dependence on the initial viscosity. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3009–3021, 2007     

Synthesis and characterization of hyperbranched polymers with increased chemical versatility for imprint lithographic resists

Hyperbranched polymers were prepared from a variety of mono‐ and difunctional monomers and used in the development of novel UV‐imprint lithography (UV‐IL) resists. The unique physical and chemical properties of these hyperbranched materials significantly increase the range of molecular systems that could be imprinted. Traditional challenges, such as the use of monomers that have low boiling points or the use of insoluble/highly crystalline momomers, are overcome by the preparation of hyperbranched polymers that incorporate these repeat units. In addition, the low viscosity of the hyperbranched macromolecules and the large number of reactive chain ends overcome many difficulties that are traditionally associated with the use of polymeric materials as imprint resists. Hyperbranched polymers containing up to 12 mol % pendant vinyl groups, needed for secondary crosslinking during imprinting, were prepared with a wide range of repeat unit structures and successfully imprinted with features from tens of microns to ∼ 100 nm. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6238–6254, 2008     

Naphthalimide‐phthalimide derivative based photoinitiating systems for polymerization reactions under blue lights

Naphthalimide‐phthalimide derivatives (NDPDs) have been synthesized and combined with an iodonium salt, N‐vinylcarbazole, amine or 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine to produce reactive species (i.e., radicals and cations). These generated reactive species are capable of initiating the cationic polymerization of epoxides and/or the radical polymerization of acrylates upon exposure to very soft polychromatic visible lights or blue lights. Compared with the well‐known camphorquinone based systems used as references, the novel NDPD based combinations employed here demonstrate clearly higher efficiencies for the cationic polymerization of epoxides under air as well as the radical polymerization of acrylates. Remarkably, one of the NDPDs (i.e., NDPD2) based systems is characterized by an outstanding reactivity. The structure/reactivity/efficiency relationships of the investigated NDPDs were studied by fluorescence, cyclic voltammetry, laser flash photolysis, electron spin resonance spin trapping, and steady state photolysis techniques. The key parameters for their reactivity are provided. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 665–674     

A Diacetylene‐Containing Wedge‐Shaped Compound: Synthesis,Morphology, and Photopolymerization

A novel wedge‐shaped compound containing two diacetylene tails, namely, methyl 3,5‐bis(trideca‐2,4‐diyn‐1yloxyl)benzoate (DDABM), was synthesized. As shown by UV/Vis spectroscopy this compound can be polymerized under UV irradiation. The crystalline structure of DDABM was investigated by grazing‐incidence wide‐angle X‐ray diffraction on oriented crystalline films deposited on PTFE‐rubbed silicon wafer substrates. Furthermore, the spherulites formed in thicker films were analyzed by wide‐angle X‐ray diffraction. A molecular packing model of DDABM based on the X‐ray diffraction data is proposed. The diacetylene units are oriented along a defined lattice direction with a reticular distance of 4.85 Å, which fulfills the requirements for topochemical polymerization. It was observed that UV polymerization does not affect the phase behavior of the compound, but mainly alters its optical properties.