Density functional study for the polymerization of ethylene monomer using a new nickel catalyst

The present computational study was designed to study the polymerization of ethylene catalyzed by a new Ni‐based PymNox organometallic compound. Recently, we have synthesized and tested the behavior of this type of catalyst in olefin polymerization. It has been experimentally observed that the unsubstituted catalyst Ni2 (aldimino PymNox catalyst ) is less active than the methyl substituted Ni1 (acetaldimino PymNox catalyst ) analogue. The reactivity of both catalysts was examined using density functional theory (DFT) models. Our results indicate that the methyl substituted Ni1 introduces some additional steric hindrance that probably renders a more suitable catalyst conformation for the monomer incorporation. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1160–1165, 2010     

Salicylaldiminato nickel(II) catalysts with 5‐halo‐3‐methoxy groups for ethylene polymerization

Two neutral salicylaldiminato methyl pyridine nickel(II) complexes were synthesized and evaluated for ethylene polymerization. Each catalyst bears a methoxy group in the 3‐position and a halogen atom in the 5‐position of the salicyl ligand, chlorine in case of catalyst 3a and bromine in 3b . Molecular structures of the catalysts were obtained by X‐ray crystallography. The resulting polymerization activities, for example, indicated by a maximum turnover frequency of 4,870 mol ethylene/(mol Ni × h) for 1‐h runs obtained with 3a , were higher than those of similar catalysts at comparable conditions reported in the literature. Catalyst 3a was slightly more active than catalyst 3b . The polymers are branched as measured by ¹H NMR and ¹³C NMR. This was also reflected in the melting temperatures between 76 and 113 °C obtained by differential scanning calorimetry. By using gel permeation chromatography measurements, it was determined that the M_w of the polymers ranges between about 5,400 and 21,600 g/mol. In particular, the effect of the polymerization temperature on the catalyst activity, degree of branching, and molecular weight properties has been described. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Some mixed cyclopentadienyl–indenyl zirconium complexes with PhCH2 or PhCH2CH2 substituents in ethylene polymerization

(RCp)(R′Ind)ZrCl₂ complexes 1 – 6 (Cp = cyclopentadienyl; Ind = indenyl; 1 , R = PhCH₂ and R′ = H; 2 , R = PhCH₂ and R′ = PhCH₂; 3 , R = PhCH₂CH₂ and R′ = H; 4 , R = PhCH₂CH₂ and R′ = PhCH₂; 5 , R = o‐Me? PhCH₂CH₂ and R′ = H; 6 , R = o‐Me? PhCH₂ and R′ = H) were synthesized and characterized with ¹H NMR, elemental analysis, mass spectrometry, and infrared spectroscopy. Their catalytic behaviors were compared with those of (Et₃SiCp)(PhCH₂CH₂Cp)ZrCl₂, (PhCH₂Cp)₂ZrCl₂, (PhCH₂‐ CH₂Cp)₂ZrCl₂, (o‐Me? PhCH₂CH₂Cp)₂ZrCl₂, and (Ind)₂ZrCl₂ in ethylene polymerization in the presence of methylaluminoxane. Complex 5 showed high activity up to 2.43 × 10⁶ g of polyethylene (PE)/mol of Zr h, and complex 4 produced PE with bimodal molecular weight distributions. The methyl group at the 2‐position of phenyl in complex 5 increased the activity greatly. The relationships between the polymerization results and the structures were analyzed with NMR spectral data. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1261–1269, 2005     

Synthesis of dithiocarbamate bearing azobenzene group and use for RAFT polymerization of vinyl monomers

A novel dithiocarbamate bearing azobenzene group, 2‐(phenylazo‐phenoxy‐carbonyl) prop‐2‐yl 9H‐carbazole‐9‐carbodithioate (APCDT), was synthesized and used as a RAFT agent in the polymerization of methyl methacrylate (MMA). The results showed that the controllability to the polymerization of MMA was promoted with APCDT as RAFT agent compared to 2‐(ethoxycarbonyl) prop‐2‐yl 9H‐carbazole‐9‐carbodithioate (EPCDT) under the same experimental conditions. The reason was attributed to the higher chain transfer constant of APCDT than that of EPCDT in the presence of more bulkier and more electrophilic azobenzene moiety. In addition, the RAFT polymerizations of St and methylacrylate (MA) using APCDT as the RAFT agent were also carried out. The ultraviolet spectrum and fluorescence spectrum of the obtained polymers were investigated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2886–2896, 2007     

Performance of the Cr[CH(SiMe3)2]3/SiO2 catalyst for ethylene polymerization compared with the performance of the Phillips catalyst

The catalysis of a silica‐supported chromium system {Cr[CH(SiMe₃)₂]₃/SiO₂} was compared with a silica‐supported chromium oxide catalyst, the Phillips catalyst (CrO₃/SiO₂). This catalyst was prepared by the calcining of the typical silica support used for the Phillips catalyst at 600 °C and by the support of tris[bis(trimethylsilyl)methyl]chromium(III) {Cr[CH(SiMe₃)₂]₃} on the silica. In the slurry‐phase polymerization, this catalyst conducted the polymerization of ethylene at a high activity without organoaluminum compounds as cocatalysts or scavengers. The activity per Cr was about 6–7 times higher than that of the Phillips catalyst. Upon the introduction of hydrogen to the system, the molecular weight of polyethylene did not change with the Phillips catalyst, but it decreased with the Cr[CH(SiMe₃)₂]₃/SiO₂ catalyst. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 413–419, 2003     

Synthesis,characterization and ethylene polymerization by metallasilsesquioxane

Soluble complexes of group (IV) metallocenes anchored on a substituted polyhedral oligomeric silsesquioxane trisilanol support were prepared and characterized. These catalyst precursors formulated as [M(O^O^O)X] are found to be active in polymerization of ethylene at high temperature in combination with ethylaluminum sesquichloride (Et₃Al₂Cl_3, EASC) as co‐catalyst. The polyethylene obtained by these catalysts is linear, crystalline and displays narrow dispersity. The unique low molecular weight PE formed in this reaction exhibits properties comparable to commercial micronized PE waxes that have potential industrial applications in surface coating and ink formulations. Copyright © 2013 John Wiley & Sons, Ltd.     

Preparation of polyethylene block copolymers by a combination of postmetallocene catalysis of ethylene polymerization and atom transfer radical polymerization

The synthesis of block copolymers consisting of a polyethylene segment and either a poly(meth)acrylate or polystyrene segment was accomplished through the combination of postmetallocene-mediated ethylene polymerization and subsequent atom transfer radical polymerization. A vinyl-terminated polyethylene (number-average molecular weight = 1800, weight-average molecular weight/number-average molecular weight =1.70) was synthesized by the polymerization of ethylene with a phenoxyimine zirconium complex as a catalyst activated with methylalumoxane (MAO). This polyethylene was efficiently converted into an atom transfer radical polymerization macroinitiator by the addition of α-bromoisobutyric acid to the vinyl chain end, and the polyethylene macroinitiator was used for the atom transfer radical polymerization of n-butyl acrylate, methyl methacrylate, or styrene; this resulted in defined polyethylene-b-poly(n-butyl acrylate), polyethylene-b-poly(methyl methacrylate), and polyethylene-b-polystyrene block copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 496–504, 2004     

Synthesis of branched polyethylenes by the tandem catalysis of silica‐supported linked cyclopentadienyl‐amido titanium catalysts and a homogeneous dibromo nickel catalyst having a pyridylimine ligand

The synthesis of branched polyethylenes by ethylene polymerization with new tandem catalyst systems consisting of methylaluminoxane‐preactivated linked cyclopentadienyl‐amido titanium catalysts [Ti(η⁵:η¹‐C₅Me₄SiMe₂NR)Cl₂ (R = Me or ^tBu)] supported on pyridylethylsilane‐modified silica (PySTiNMe and PySTiN^tBu) and homogeneous dibromo nickel catalyst having a pyridyl‐2,6‐diisopropylphenylimine ligand (PyminNiBr₂) in the presence of modified methylaluminoxane was investigated. Ethylene polymerization with only PyminNiBr₂ yielded a mixture of 1‐ and 2‐olefin oligomers with methyl branches [weight‐average molecular weight (M_w) ～ 460)] with a ratio of about 1:7. By the combination of this nickel catalyst with PySTiN^tBu, polyethylenes with long‐chain branches (M_w = 15,000–50,000) were produced. No incorporation of 2‐olefin oligomers was observed in the ¹³C NMR spectra. Unexpectedly, the combination of the nickel catalyst with PySTiNMe produced lower molecular weight polyethylenes with only methyl branches. The molecular weight distributions of branched polyethylenes obtained with both PySTiNMe and PySTiN^tBu combined with the nickel catalyst were broad (weight‐average molecular weight/number‐average molecular weight < 9). Bimodal gel permeation chromatography (GPC) curves were clearly observed in the PySTiNMe system, whereas GPC curves with small shoulders in low molecular weight areas were observed for PySTiN^tBu. The synthesis of branched polyethylenes with tandem catalyst systems of corresponding homogeneous titanium catalysts and the nickel catalyst was also investigated for comparison. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 528–544, 2003     

Synthesis and optoelectronic properties of novel benzodifuran semiconducting polymers

Two new semiconducting polymers poly{4,8‐bis(4‐decylphenylethynyl)benzo[1,2‐b:4,5‐b′]difuran} ( P1 ) and poly {4,8‐bis(4‐decylphenylethynyl)benzo[1,2‐b:4,5‐b′]difuran‐alt‐4,8‐bis(4‐decylphenylethynyl)benzo[1,2‐b:4,5‐b′]dithiophene} ( P2 ) have been synthesized. These polymers were tested in bulk heterojunction solar cells yielding power conversion efficiencies of 1.19% for P1 and 0.79% for P2 . The surface morphology of the solar cell devices indicated that both the polymers display a granular morphology with smoother films displaying higher power conversion efficiencies. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation of macroporous functionalized polymer beads by a multistep polymerization and their application in zirconocene catalysts for ethylene polymerization

Macroporous functionalized polymer beads of poly(4‐vinylpyridine‐co‐1,4‐divinylbenzene) [P(VPy‐co‐DVB)] were prepared by a multistep polymerization, including a polystyrene (PS) shape template by emulsifier‐free emulsion polymerization, linear PS seeds by staged template suspension polymerization, and macroporous functionalized polymer beads of P(VPy‐co‐DVB) by multistep seeded polymerization. The polymer beads, having a cellular texture, were made of many small, spherical particles. The bead size was 10–50 μm, and the pore size was 0.1–1.5 μm. The polymer beads were used as supports for zirconocene catalysts in ethylene polymerization. They were very different from traditional polymer supports. The polymer beads could be exfoliated to yield many spherical particles dispersed in the resulting polyethylene particles during ethylene polymerization. The influence of the polymer beads on the catalytic behavior of the supported catalyst and morphology of the resulting polyethylene was investigated. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 873–880, 2003     

Study of the composition and morphology of new modifications of titanium‐magnesium catalysts with improved properties in ethylene polymerization

Data on new modifications of supported titanium‐magnesium catalysts (TMCs) with improved performance in ethylene polymerization are reported. These catalysts possess a high and stable activity, an enhanced ability to regulate molecular weight of the polymer by hydrogen, a controllable particle size at a narrow particle size distribution, and the ability to produce the polymer with an increased bulk density. Various physicochemical methods were used to obtain data on the chemical composition of novel supports and catalysts, their phase composition and crystal structure as well as the pore structure. The results obtained were used to discuss possible correlations between composition and structure of TMCs and their catalytic properties. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2545–2558     

High pressure ethylene polymerization with a post‐metallocene bis‐phenyl phenoxy catalyst

The use of post‐metallocene bis‐phenylphenoxy catalysts to polymerize ethylene under high ethylene pressures (>25,000 psi) results in some remarkable catalytic properties. The high ethylene pressure produces molar ethylene concentrations in the reactor as much as 40 times higher than in typical low pressure ethylene polymerizations. This high ethylene concentration results in high catalyst efficiency at high temperatures and low reactor residence time, between 180 °C and 240 °C the catalyst efficiency surprisingly increases with increasing temperature, allowing for use of these catalysts at temperatures much higher than can be utilized in the low pressure processes. It has further been demonstrated that under these conditions increasing hydrogen levels up to 0.5 mol% does not significantly affect the polymer molecular weight; however, polymer molecular weight control can be realized with varying reactor temperature. The polymer produced is shown to be high density polyethylene made from a single site catalyst and not free radical initiated low density polymer. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 861–866     

Methylaluminoxane‐free ethylene polymerization with in situ activated zirconocene triisobutylaluminum catalysts and silica‐supported stabilized borate cocatalysts

Heterogenization of tris(pentafluorophenyl)borane [B(C₆F₅)₃] on a silica support stabilized with chlorotriphenylmethane (CICPh₃) and N,N‐dimethylaniline (HNMe₂Ph) creates the following supported borane cocatalysts: [HNMe₂Ph]⁺[B(C₆F₅)₃‐SiO₂]^? and [CPh₃]⁺[B(C₆F₅)₃‐SiO₂]^?. These supported catalysts were reacted with Cp₂ZrCl₂ TIBA in situ to generate active metallocene species in the reactor. Triisobutylaluminum (TIBA) was a good coactivator for dichloro‐zirconocene, acting as the prealkylating agent to generate cationic zirconocene (Cp₂ZrC₄H₉⁺). The catalytic performances were determined from the kinetics of ethylene‐consumption profiles that were independent of the time dedicated to the activation of the catalysts. The scanning electron microscopy‐energy dispersive X‐ray measurements showed that B(C₆F₅)₃ dispersed uniformly on the silica support. Under our reaction conditions, the [CPh₃]⁺[B(C₆F₅)₃‐SiO₂]^? system had higher productivity and weight‐average molecular weight than the [HNMe₂Ph]⁺[B(C₆F₅)₃‐SiO₂]^? system. For the [CPh₃]⁺[B(C₆F₅)₃‐SiO₂]^? system, the productivity increased with the amount catalyst; however, the polydispersity index of polyethylene synthesized did not change. The final shape of polymer particles was a larger‐diameter version of the original support particle. The polymer particles synthesized with supported [CPh₃]⁺[B(C₆F₅)₃‐SiO₂]^? catalysts had larger diameters. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3240–3248, 2002     

Kinetic modeling studies of ethylene polymerization reactions using supported chromium catalysts

Kinetic models for ethylene polymerization based on a general coordination–insertion mechanism, in which either a monocoordinated species or a bicoordinated species could lead to migratory insertion, were constructed. These models were implemented through the solution of a set of differential equations resulting from the material balances for all the species involved. The application of these kinetic models to monomer consumption for different supported catalysts produced very good fittings and allowed the estimation of the kinetic rate constants of each elementary step. Although the same kinetic scheme was used to describe all the observations, the results of the fitting showed that the supported chromium species behaved very differently according to the support. Only in the case of the silica‐supported catalysts was mechanical fragmentation of the particles observed during the course of the reaction, and this implied the inclusion of a new term in the model. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3464–3472, 2004     

Precision branching in ethylene copolymers: Synthesis and thermal behavior

Acyclic diene metathesis polymerization allows the synthesis of sequenced polyethylene copolymers via step-growth propagation, thereby avoiding the inherent side reactions associated with chain polymerization. Here we review the synthesis and thermal behavior of ADMET polyethylene (PE) as well as ethylene/propylene (EP), ethylene/butene (EB), ethylene/octane (EO), and ethylene/vinyl ether (EVE) copolymers prepared by ADMET. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4981–4989, 2006     

Synthesis and characterization of a series of 2‐aminopyridine nickel(II) complexes and their catalytic properties toward ethylene polymerization

A series of 2‐aminopyridine Ni(II) complexes bearing different substituent groups {(2‐PyCH₂NAr)NiBr, Ar = 2,4,6‐trimethylphenyl ( 3a) , 2,6‐dichlorophenyl ( 3b ), 2,6‐dimethylphenyl ( 3c) , 2,6‐diisopropylphenyl ( 3d ), 2,6‐difluorophenyl ( 3e ); (2‐PyCH₂NHAr)₂NiBr₂, Ar = 2,6‐diisopropylphenyl ( 4a )} have been synthesized and investigated as precatalysts for ethylene polymerization in the presence of methylaluminoxane (MAO). High molecular weight branched polymers as well as short‐chain oligomers were simultaneously produced with these complexes. Enhancing the steric bulk of the ortho‐aryl‐substituents of the catalyst resulted in higher ratio of solid polymer to oligomer and higher molecular weight of the polymer. With ortho‐haloid‐substitution, the catalysts afforded a product with low polymer/oligomer ratio ( 3b ) and even only oligomers ( 3e ) in which C₁₄H₂₈ had the maximum content. Compared with complex 3d containing ionic ligand, complex 4a containing neutral ligand exhibited obviously low catalytic activity for ethylene polymerization. The molecular weight, molecular weight distribution, and microstructure of the resulted polymer were characterized by gel permeation chromatography and ¹³C NMR spectrogram. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1618–1628, 2008     

Synthesis,characterization, and heterogeneous catalysis of polymer‐supported poly(propyleneimine) dendrimer stabilized gold nanoparticle catalyst

We report here, the synthesis of two types of heterogeneous nanoparticle catalysts viz., polymer‐supported poly(propyleneimine)‐G2 dendrimer stabilized gold nanoparticle catalysts using crosslinked poly(4‐vinylpyridine) matrix (PSP4VP) as support material. The grafting of dendrimer on the surface of P4VP beads was characterized by FTIR spectrophotometer and CHN analyses. The immobilization of AuNPs was characterized by UV‐Vis spectrum, SEM, and HRTEM studies. The resultant polymer‐supported dendrimer stabilized AuNPs were used as a heterogeneous catalyst for the reduction of 4‐nitrophenol. The catalytic activity is found to be excellent and it can also be reused many times by simple filtration and activity remains maintained. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2525–2532, 2010     

Half‐titanocene complexes bearing dianionic 6‐benzimidazolylpyridyl‐2‐carboximidate ligands: Synthesis,characterization, and their ethylene polymerization

6‐Benzimidazolylpyridyl‐2‐carboximidic half‐titanocene complexes, Cp′TiLCl (Cp′ = C₅H₅, MeC₅H₄, C₅Me₅, L = 6‐benzimidazolylpyridine‐2‐carboxylimidic, C1–C13 ), were synthesized and characterized along with single‐crystal X‐ray diffraction. The half‐titanocene chlorides containing substituted cyclopentadienyl groups, especially pentamethylcyclopentadienyl groups were more stable, while those without substituents on the cyclopentadienyl groups were easily transformed into their dimeric oxo‐bridged complexes, (CpTiL)₂O ( C14 and C15 ). In the presence of excessive amounts of methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), all half‐titanocene complexes showed high catalytic activities for ethylene polymerization. The substituents on the Cp groups affected the catalytic behaviors of the complexes significantly, with less substituents favoring increased activities and higher molecular weights of the resultant polyethylenes. Effects of reaction conditions on catalytic behaviors were systematically investigated with catalytic systems of mononuclear C1 and dimeric C14 . With C1 /MAO, large MAO amount significantly increases the catalytic activity, while the temperature only has a slight effect on the productivity. In the case of C14 /MAO catalytic system, temperature above 60 °C and Al/Ti value higher than 5000 were necessary to observe good catalytic activities. In both systems, higher reaction temperature and low cocatalyst amount gave the polyethylenes with higher molecular weights. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3396–3410, 2008     

Gold Tailored Photosensitive Elastin‐like Polymer: Synthesis of Temperature,pH and UV‐vis Sensitive Probes

Here, we describe a procedure to manufacture smart hybrid probes that exhibit tunable optical properties as a function of multiple environmental variations. Initially, we achieved a one‐pot synthesis of gold‐PREP (photo‐responsive elastin‐like polymer) conjugate Gold‐AzoGlu15 via reduction of auric acid in the presence of PREP AzoGlu15 . Outstandingly, Gold‐AzoGlu15 exhibited pH and temperature sensitiveness. However, Gold‐AzoGlu15 was not UV‐vis sensitive. We noticed that photo‐isomerisation of azobenzene moieties in Gold‐AzoGlu15 could not be detected by UV‐vis spectroscopy. In a subsequent step, we explored the use of cyclodextrins and the formation of alkanethiol mixed‐monolayers over mother Gold‐AzoGlu15 by thiol‐place exchange reactions in order to decouple photo‐isomerisation of azobenzene from the bulk phase absorption. In this sense we achieved the synthesis of β‐cyclodextrin capped Gold‐CD‐AzoGlu15 . Notable was that cis‐trans photo‐conversion of azobenzene groups in Gold‐CD‐AzoGlu15 could be successfully detected. Finally, we present the optical properties exhibited by multi‐sensitive probe Gold‐CD‐AzoGlu15 as a function of pH, temperature and UV‐vis irradiation. We think that gold‐PREP hybrids could be of great interest in the design of multi‐functional chromophore‐metal nanocomposites that operate in aqueous media for the development of multi‐stimuli sensitive detectors for biosensing applications.