Controlled Supramolecular Architecture Transformation from Homopolymer to Copolymer through Competitive Self‐Sorting Method

Supramolecular copolymers can not only enrich the diversity of the polymer backbone but also exhibit certain special and improved properties compared with supramolecular homopolymers. However, the synthesis procedure of supramolecular copolymers is relatively complicated and time‐consuming. Herein, a simple transformation from an AB₂‐based supramolecular hyperbranched homopolymer to an AB₂+CD₂‐based supramolecular hyperbranched alternating copolymer by the “competitive self‐sorting” strategy is reported. After adding CD₂ monomer, which bears a competitive neutral guest moiety ( TAPN ) and two receptive benzo‐21‐crown‐7 host moieties ( B21C7 ), to the as‐prepared AB₂‐type supramolecular hyperbranched homopolymer constructed by the self‐assembly of dialkylammonium salt ( DAAS , A group)‐functionalized pillar[5]arene ( MeP5 , B groups) monomers, the initial homopolymer structure is disrupted and then reassemble into a new supramolecular hyperbranched alternating copolymer based on the competitive self‐sorting interaction between MeP5 ‐ TAPN and B21C7 ‐ DAAS . This study supplies a convenient approach to directly transform supramolecular homopolymers into supramolecular copolymers.

     

Hyperbranched poly(ether–urea)s using AB2‐type blocked isocyanate monomer and azide monomer: Synthesis,characterization, reactive end functionalization,and copolymerization with AB monomer

3,5‐bis(4‐aminophenoxy)phenyl phenylcarbamate—a novel AB₂‐type blocked isocyanate monomer and 3,5‐bis{ethyleneoxy(4‐aminophenoxy)}phenyl carbonyl azide—a novel AB₂‐type azide monomer were synthesized in high yield. Step‐growth polymerization of these monomers were found to give a first example of hyperbranched poly (aryl‐ether‐urea) and poly(aryl‐alkyl‐ether‐urea). Molecular weights (M_w) of the polymer were found to vary from 1,858 to 52,432 depending upon the monomer and experimental conditions used. The polydispersity indexes were relatively narrow due to the controlled regeneration of isocyanate functional groups for the polymerization reaction. The degree of branching (DB) was determined using ¹H‐NMR spectroscopy and the values ranged from 87 to 54%. All the polymers underwent two‐stage decomposition and were stable up to 300 °C. Functionalized end‐capping of poly(aryl‐ether‐urea) using phenylchloroformate and di‐t‐butyl dicarbonate (Boc)₂O changed the thermal properties and solubility of the polymers. Copolymerization of AB₂‐type blocked isocyante monomer with functionally similar AB monomer were also carried out. The molecular weights of copolymers were found to be in the order of 6 × 10⁵ with narrow dispersity. It was found that the T_g's of poly(aryl‐alkyl‐ether‐urea)s were significantly less (46–49 °C) compared to poly(aryl‐ether‐urea)s. Moreover the former showed melting transition at 154 °C, which was not observed in the latter case. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2959–2977, 2007     

Hydroxyl‐ and amine‐terminated hyperbranched polyurethanes using AB2‐type azide monomers: Synthesis,characterization, fluorescence,and charge‐transfer complexation studies

Novel AB₂‐type azide monomers such as 3,5‐bis(4‐methylolphenoxy)carbonyl azide (monomer 1) , 3,5‐bis(methylol)phenyl carbonyl azide (monomer 2) , 4‐(methylol phenoxy) isopthaloyl azide (monomer 3) , and 5‐(methylol) isopthaloyl azide (monomer 4) were synthesized. Melt and solution polymerization of these monomers yielded hydroxyl‐ and amine‐terminated hyperbranched polyurethanes with and without flexible ether groups. The structures of theses polymers were established using FT‐IR and NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 3.2 × 10³ to 5.5 × 10⁴ g/mol depending on the experimental conditions used. The thermal properties of the polymers were evaluated using TGA and DSC: the polymer obtained from monomer ( 1 ) exhibited lowest T_g and highest thermal stability and the polymer obtained from monomer ( 2 ) registered the highest T_g and lowest thermal stability. All the polymers displayed fluorescence maxima in the 425–525 nm range with relatively narrow peak widths indicating that they had pure and intense fluorescence. Also, the polymers formed charge transfer (CT) complexes with electron acceptor molecules such as 7,7,8,8‐tetracyano‐quino‐dimethane (TCNQ) and 1,1,2,2‐tetracyanoethane (TCNE) as evidenced by UV‐visible spectra. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3337–3351, 2009     

Hyperbranched‐upon‐dendritic macromolecules as unimolecular hosts for controlled release

Novel amphiphilic hyperbranched‐upon‐dendritic polymers with a dendritic polyester core, a linear poly(ε‐caprolactone) (PCL) inner shell, and a hyperbranched polyglycerol outer shell have been prepared. The structures of the hyperbranched‐upon‐dendritic polymers were characterized by using NMR spectra. The critical aggregating concentrations (CACs) of those amphiphilic hyperbranched‐upon‐dendritic polymers were measured by using pyrene as the polarity probe. To study the encapsulation performances of those hyperbranched‐upon‐dendritic polymers as unimolecular hosts, inter‐molecular encapsulation was carefully prevented by controlling the host concentrations below their CACs and by washing with good organic solvents. The study on encapsulation of two model guest molecules, pyrene and indomethacin, was performed. The amounts of encapsulated molecules were dependent mainly on the size of inner linear shells. About three pyrene molecules or five indomethacin molecules were encapsulated in hyperbranched‐upon‐dendritic polymers with average PCL repeating units of two but different hyperbranched polyglycerol outer shells, whereas about five pyrene molecules or about 12 indomethacin molecules were encapsulated in those with PCL repeating units of nine. The encapsulated molecules could be released in a controlled manner. Thus, the hyperbranched‐upon‐dendritic polymers could be used as unimolecular nanocarriers with controllable molecular encapsulation dosage for controlled release. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4013–4019, 2010     

Manipulation of the molecular weight and branching structure of hyperbranched poly(arylene ether phosphine oxide)s prepared via an A2 + B3 approach

A series of hyperbranched poly(arylene ether phosphine oxide)s (HB PAEPOs) were prepared via an A₂ + B₃ polymerization scheme with tris(4‐fluorophenyl)phosphine oxide as B₃, and a variety of bisphenols as A₂. The effects of the reactivity of the A₂ monomer, the A:B ratio, the addition mode, the solvent, and the concentration on the final molecular weight, polydispersity index (PDI), and degree of branching (DB) were studied. Soluble HB PAEPOs with weight‐average molecular weights of up to 299,000 Da were achieved. Reactions in which the A₂ component was added slowly resulted in lower DBs (0.2–0.5), whereas the slow addition of the B₃ component provided samples with DBs of approximately 0.75. Reactions performed under high‐dilution conditions afforded completely soluble materials with weight‐average molecular weights of 9000–12,100 Da and PDI values as low as 2.20. The molecular weights achieved under high‐dilution conditions were independent of the mode of monomer addition. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3871–3881, 2003     

Facile Fabrication of pH‐Responsive and Size‐Controllable Polymer Vesicles From a Commercially Available Hyperbranched Polyester

A novel pH‐responsive polymer vesicle obtained by the aqueous self‐assembly of carboxy‐terminated hyperbranched polyesters is reported. The synthesis is very simple, just a one‐step esterification of the commercially available hydroxy‐terminated hyperbranched polyester of Boltorn Hx (x = 20, 30, 40) with succinic anhydride. The vesicle size can be controlled from 200 nm to 10 µm by simply adjusting the solution pH as well as the degrees of branching (or generation).

     

Synthesis and self‐assembly of hyperbranched polymers with benzoyl terminal arms

Hyperbranched polyesters (HPs) with a variable content of benzoyl terminal groups were synthesized through the chemical modification of the HPs' cores by substituting a controlled fraction of the terminal hydroxyl groups with benzoyl chloride. The resulting hyperbranched polymers that were modified by benzoyl groups (HPs‐B) were characterized by ¹H NMR, FTIR, differential scanning calorimetry (DSC), and gel permeation chromatography (GPC). Research results revealed that self‐assembled structures could be formed in selected solvents (acetone/n‐hexane). It was found that the morphologies of self‐assembled structures could be adjusted by controlling the content of outside benzoyl terminal groups in the hyperbranched polymers, the volume ratio of acetone with n‐hexane, and the concentration of the hyperbranched polymers with benzoyl terminal arms. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5554–5561, 2005     

Novel hyperbranched polymers synthesized via A3 + B(B′) approach by radical addition‐coupling polymerization

In this study, a novel application of radical addition‐coupling polymerization (RACP) for synthesis of hyperbranched polymers is reported. By Cu/PMDETA‐mediated RACP of 2‐methyl‐2‐nitrosopropane with trimethylolpropane tris(2‐bromopropionate) or a bromo‐ended 3‐arm PS macromonomer, two types of hyperbranched polymers with high degree of polymerization are synthesized under mild conditions, respectively. The chemical structures of the hyperbranched polymers are carefully characterized. By selective degradations of the ester groups and weak bonds of NO? C in the polymers, high degree of alternative connection of the two monomers in the synthesized polymers have been identified. Based on the experimental results, mechanism of formation of the hyperbranched polymer is proposed, which includes formation of carbon radicals from the tribromo monomer through single electron transfer, its capture by 2‐methyl‐2‐nitrosopropane that results in nitroxide radical, and cross‐coupling reaction of the nitroxide radical with other carbon radicals. Hyperbranched polymer can be formed in a step‐growth mode after multiple steps of such reactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 904–913     

Molecular dynamics simulations of end‐grafted polymers with charged side chains

We report molecular dynamics simulations on bottle‐brush polyelectrolytes end‐grafted to a planar surface. For each bottle‐brush polyelectrolyte, flexible charged side chains are anchored to one neutral main chain. The effects of the counterion valence and the grafting density on the density profiles and the structural characteristics of the brush were studied in this work. It is found that the electrostatic repulsion between charged monomers in the side chains leads an extended conformation of the brush in a solution containing monovalent counterions, while strong electrostatic binding of multivalent counterions to the side chains has a significant contribution to the collapse of the brush. For the trivalent case, the distribution of end monomers in the main chains becomes broader upon decreasing the grafting density, as compared with the monovalent case. However, the position of the distribution for the monovalent case is relatively insensitive to the change of the grafting density. Additionally, with increased counterion valence, enhanced electrostatic correlation between counterions and charged side chains also weakens the diffusive ability of counterions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Self‐Assembled Monolayer Formed by a Rhenium Complex Containing Hyperbranched Polymer

Summary: The synthesis of a hyperbranched polymer containing a rhenium bipyridine complex is reported. The polymer was synthesized from a monomer that contains two chlorotricarbonyl rhenium(I ) bipyridine moieties and a stilbazole ligand, and the polymer was formed by the coordination reaction in one single step. Gel permeation chromatography results showed that the resulting polymer had a strong interaction with the column packing material, which was reduced when the eluent was added with an electrolyte. Both atomic force microscopy and laser light scattering showed that the size of the polymer molecules was in the range between 25–30 nm. A monolayer of polymer molecules could form on a pretreated substrate by the self‐assembly process, which can serve as the building block for multilayer ultrathin film devices.

The metal‐containing hyperbranched polymer synthesized here.     

Synthesis of sulfur‐containing hyperbranched polymers by the bisthiolation polymerization of diethynyl disulfide derivatives

The reaction of phenyl propynyl ether and diphenyl disulfide in the presence of 1 mol % tetrakis(triphenylphosphine)palladium as a model reaction of the polymerization of bis(4‐prop‐2‐ynyloxyphenyl) disulfide ( 1a ) gave a Z‐substituted dithioalkene. No E‐substituted dithioalkene was formed in this reaction. The palladium‐catalyzed bisthiolation polymerization of a diethynyl disulfide derivative, 1a , in benzene, was carried out to give a hyperbranched polymer ( 5a ) containing a Z‐substituted dithioalkene unit after reaction for 4 h at 70 °C. From the gel permeation chromatography analysis (chloroform, PSt standards), the number‐average and weight‐average molecular weights of 5a were found to be 8,100 and 57,000, respectively. The structure of 5a was confirmed by ¹H and ¹³C NMR spectra. The obtained polymer was soluble in common organic solvents such as benzene, acetone, and CHCl₃. Polymerization for more than 5 h gave insoluble products. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3580–3587, 2007     

Unimolecular micelles and reverse micelles based on hyperbranched polyethers—Comparative study of AB2 + A‐R and A2 + B3 + A‐R type strategies

Core‐shell type hyperbranched polymers that are capable of forming unimolecular micelles and reverse micelles in aqueous and hydrocarbon medium, respectively, were synthesized via two approaches, namely AB₂ + A‐R and A₂ + B₃ + A‐R type copolymerizations. In case of micelle‐forming polymers, an AB₂ monomer carrying a decamethylene spacer was used along with heptaethylene glycol monomethyl ether (HPEG) as the A‐R type comonomer. One the other hand, for the preparation of reverse micelle‐forming polymers, an AB₂ monomer containing an oligo(oxyethylene) spacer was used along with cetyl alcohol as the A‐R type comonomer. The former was readily soluble in water while the latter was soluble in hydrocarbon solvents like hexane. NMR spectral studies confirmed that both the approaches generated highly branched structures wherein about 65–70% of the terminal B groups were capped by the A‐R comonomer. Dye‐uptake measurements revealed that the polymers prepared via the AB₂ + A‐R approach exhibited a significantly larger uptake compared with those prepared via the A₂ + B₃ + A‐R approach. This suggests that the AB₂ + A‐R approach generates hyperbranched polymers with better defined core‐shell topology when compared with polymers prepared via the A₂ + B₃ + A‐R approach, which is in accordance with previous studies that suggest that A₂ + B₃ approach yields polymers with significantly lower branching levels and consequently less compact structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 80–91, 2009     

Synthesis of a Star‐Shaped Copolymer with a Hyperbranched Poly(3‐methyl‐3‐oxetanemethanol) Core and Tetrahydrofuran Arms by One‐Pot Copolymerization

A star‐shaped copolymer consisting of a hyperbranched poly(3‐methyl‐3‐oxetanemethanol) core and polytetrahydrofuran arms was obtained by a one‐step cationic copolymerization of 3‐methyl‐3‐oxetanemethanol with tetrahydrofuran initiated by BF₃·OEt₂. Tetrahydrofuran served as a solvent at the earlier stage of the polymerization. After 3‐methyl‐3‐oxetanemethanol was exhausted essentially, the resulting hyperbranched species acted as a macro‐initiator, and initiated the cationic polymerization of tetrahydrofuran. This can be attributed to the large difference in reactivities of the monomers.     

Hyperbranched copolyfluorene from a 2,4,7‐trifunctional fluorene monomer

A new hyperbranched ( P1 ) and linear copolyfluorene ( P2 ) were prepared from 2,4,7‐trifunctional (branching) and 2,7‐bifunctional fluorene monomer, respectively, by the Wittig reaction, followed with end‐capping by aromatic oxadiazole groups, to study the effect of hyperbranch structure. The weight‐average molecular weights (M_w) of P1 and P2 , determined by gel permeation chromatography using polystyrene as standard, were 33,000 and 25,700, respectively. The polymers were readily soluble in common organic solvents and exhibited good thermal stability (T_d > 400 °C). Optical properties, both in solution and film state, were investigated using absorption and photoluminescence (PL) spectra. In film state, the absorption and PL spectra peaked at 401–425 nm and 480–495 nm, respectively. The P1 showed energy funnel effect and enhanced fluorescence efficiency owing to hyperbranched structure and terminal oxadiazole groups. The HOMO and LUMO levels of P1 ( P2) , estimated from cyclic voltammograms, are ?5.34 (?5.25) eV and ?2.94 (?2.94) eV, respectively. Two‐layer polymer light‐emitting diodes devices (ITO/PEDOT/ P1 /Ca/Al) exhibited maximal luminance and luminous efficiency of 3630 cd/m² and 0.78 cd/A, respectively, which are superior to its linear counterpart P2 (598 cd/m², 0.11 cd/A). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5541–5551, 2007     

Rotaxane‐type hyperbranched polymers from a crown ether host and paraquat guests containing blocking groups

Rotaxane‐type hyperbranched polymers are synthesized for the first time from A₂B type semi‐rotaxane monomers formed in situ via complexation of bis(m‐phenylene)‐32‐crown‐10 dimethanol ( 1 ) and two paraquat ω‐n‐alkylenecarboxylic acid derivatives with tris(p‐t‐butylphenyl)methylphenylalkylene stoppers ( 8 and 9) . Rotaxane and taco complexes exist in solutions of the hyperbranched polyesters in CD₃CN/CDCl₃ as confirmed by NMR spectroscopy, but the taco complexes, which derive from non‐rotaxanated paraquat units, disappear in DMSO‐d₆. NMR spectroscopy indicates the portion of rotaxanes strongly interlocked by the environment (inner rotaxanes) is larger in HP1?9 , which has longer alkylene spacers, perhaps indicating a higher degree of polymerization. The molecular size increases upon formation of the hyperbranched polymers are confirmed by dynamic light scattering and by viscometry. As with covalent hyperbranched polymers a number of potential applications exist; the unique mechanically linked character and the presence of uncomplexed host and guest moieties foreshadow the use of such systems for their responses to external stimuli with the added benefit of providing molecular recognition sites useful as delivery vehicles. Use of other host‐guest motifs to form the semirotaxane A₂B monomers is possible and complementary systems with higher binding constants will enable efficient syntheses of high molecular weight, mechanically linked hyperbranched polymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1647–1658     

Hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s: Synthesis,characterization, end‐group modification,and optical properties

Novel AB₂‐type monomers such as 3,5‐bis(4‐methylolphenoxy)benzoic acid ( monomer 1 ), methyl 3,5‐bis(4‐methylolphenoxy) benzoate ( monomer 2 ), and 3,5‐bis(4‐methylolphenoxy)benzoyl chloride ( monomer 3 ) were synthesized. Solution polymerization and melt self‐polycondensation of these monomers yielded hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s. The structure of these polymers was established using FTIR and ¹H NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 2.0 × 10³ to 1.49 × 10⁴ depending on the polymerization techniques and the experimental conditions used. Suitable model compounds that mimic exactly the dendritic, linear, and terminal units present in the hyperbranched polymer were synthesized for the calculation of degree of branching (DB) and the values ranged from 52 to 93%. The thermal stability of the polymers was evaluated by thermogravimetric analysis, which showed no virtual weight loss up to 200 °C. The inherent viscosities of the polymers in DMF ranged from 0.010 to 0.120 dL/g. End‐group modification of the hyperbranched polymer was carried out with phenyl isocyanate, 4‐(decyloxy)benzoic acid and methyl red dye. The end‐capping groups were found to change the thermal properties of the polymers such as T_g. The optical properties of hyperbranched polymer and the dye‐capped hyperbranched polymer were investigated using ultraviolet‐absorption and fluorescence spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5414–5430, 2008     

Reduction‐cleavable hyperbranched polymers with limited intramolecular cyclization via click chemistry

In this contribution, we present new reduction‐cleavable hyperbranched disulfide bonds‐containing poly(ester triazole)s with limited intramolecular cyclization, which can be synthesized by the Cu(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) of A₂ monomer of dipropargyl 3,3′‐dithiobispropionate and B₃ monomer of tris(hydroxymethyl)ethane tri(4‐azidobutanoate). The hyperbranched poly(ester triazole)s possess numerous terminal groups and weight‐average molecular weight up to 20,400 g mol^?1 with a polydispersity index in the range 1.57–2.17. The CuAAC introduces rigid triazole units into the backbones of hyperbranched poly(ester triazole)s and reduces intramolecular cyclization, which is proved by topological analysis and ¹H NMR spectroscopy. The disulfide bonds on backbones endow the reduction‐cleavable feature to the hyperbranched poly(ester triazole)s at the presence of dithiothreitol. It gives a novel and convenient methodology for the synthesis of reduction‐responsive functional polymer with controlled topologies, and the reduction‐cleavable hyperbranched poly(ester triazole)s with limited intramolecular cyclization are expected to possess potential in the application of stimuli‐responsive anticancer drug nanocarriers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2374–2380     

Synthesis of novel hyperbranched polymer through cationic ring‐opening multibranching polymerization of 2‐hydroxymethyloxetane

The cationic ring‐opening multibranching polymerization of 2‐hydroxymethyloxetane ( 1 ) as a novel latent AB₂‐type monomer was carried out using trifluoromethane sulfonic acid or trifluoroboron diethyl etherate by a slow‐monomer‐addition (SMA) method. The polymer yield of poly‐1 ranged from ca. 58–88%, which increase with the increasing monomer addition time on the SMA method. The absolute molecular weights (M_w,MALLS) and the polydispersities of poly‐1 were in the range of 8,000–43,500 and 1.45–4.53, respectively, which also increased with the increasing monomer addition time. The Mark‐Houwink‐Sakurada exponents α in 0.2 M NaNO₃ aq. were determined to be 0.02–0.25 for poly‐1 , indicating that poly‐1 has compact forms in the solution because of the highly branched structure. The degree of the branching value of poly‐1 , which was calculated by Frey's equation, ranged from ca. 0.50 to 0.58, which increased with the increasing monomer addition time. The steady shear flow of poly‐1 in aqueous solution exhibited a Newtonian behavior with steady shear viscosities independent of the shear rate. The results of the MALLS, NMR, and viscosity measurements indicated that poly‐1 is composed of a highly branched structure, i.e., the hyperbranched poly (2‐hydroxymethyloxetane). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Kinetics of self‐condensing vinyl hyperbranched polymerization in three‐dimensional space

Self‐condensing vinyl hyperbranched polymerization (SCVP) with A‐B* type monomer is simulated applying Monte Carlo method using 3d bond fluctuation lattice model in three‐dimensional space. The kinetics of SCVP with zero active energy of reaction is studied in detail. It is found that the maximal number–average and weight–average polymerization degrees and the maximal molecular weight distribution, at varying the initial monomer concentration and double bond conversion, are about 52, 190, and 3.93, respectively, which are much lower than theoretical values. The maximal average fraction of branching points is about 0.27, obtained at full conversion at the initial monomer concentration of 0.75. The simulation demonstrated the importance of steric effects and intramolecular cyclization in self‐condensing vinyl hyperbranched polymerization. The results are also compared with experiments qualitatively and a good agreement is achieved. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4486–4494, 2008