Modification of mechanical and thermal property of chitosan–starch blend films

Chitosan–starch blend films (thickness 0.2 mm) of different composition were prepared by casting and their mechanical properties were studied. To improve the properties of chitosan–starch films, glycerol and mustard oil of different composition were used. Chitosan–starch films, incorporated with glycerol and mustard oil, were further modified with monomer 2-hydroxyethyl methacrylate (HEMA) using gamma radiation. The modified films showed improvement in both tensile strength and elongation at break than the pure chitosan–starch films. Water uptake of the films reduced significantly than the pure chitosan–starch film. Thermo gravimetric analysis (TGA) and dynamic mechanical analysis (DMA) showed that the modified films experience less thermal degradation than the pure films. Scanning electron microscopy (SEM) and FTIR were used to investigate the morphology and molecular interaction of the blend film, respectively.     

Facile fabrication of chitosan active film with xylan via direct immersion

Chitosan film was immersed in NaOH solution with xylan to simply prepare active chitosan/xylan film. FT-IR, XRD, FE-SEM, AFM and XPS were used to evaluate the effects of xylan on the structure and morphology of chitosan film, and a wide variety of material characteristics of the chitosan/xylan composite films were investigated. The results showed that the xylan chains entered into the gap of chitosan film and became nodules, leading to strong hydrogen bonds and electrostatic interactions between chitosan and xylan. Moreover, the introduction of xylan not only resulted in stronger crystallinity and a more compact structure of chitosan film, but also had an important effect on the properties of chitosan film. The tensile strength, breaking elongation and anti-ultraviolet performance of the chitosan/xylan films were improved greatly with the increasing concentration of xylan; the water vapor transmission rate, water absorption rate and oxygen barrier property of chitosan/xylan composite films were higher than those of chitosan film; chitosan/xylan composite films still showed hydrophobicity when the xylan concentration was more than 1 %. The chitosan/xylan composite film has more potential to be used as food packaging than pure chitosan film.     

Surface modifications of Nitinol for biomedical applications

Cathodic electrophoretic deposition (EPD) has been utilized for the fabrication of composite films for the surface modification of NiTi shape memory alloys (Nitinol). In the proposed method, chitosan (CH) was used as a matrix for the incorporation of other functional materials, such as heparin, hydroxyapatite and bioglass. Chitosan-heparin films were deposited from solutions of non-stoichiometric chitosan-heparin complexes. It was found that the addition of anionic heparin to the solutions of cationic chitosan resulted in a significant increase in the cathodic deposition rate. The thickness of the films prepared by this method varied in the range of 0.1-3 microm. The ability of the chitosan-heparin films to bind antithrombin, as measured by binding of (125)I-radiolabeled antithrombin, was much greater than that of pure chitosan films. Composite chitosan-hydroxyapatite films, with thickness of 1-30 microm, were obtained as monolayers or laminates, containing chitosan-hydroxyapatite layers, separated by layers of pure chitosan. The hydroxyapatite nanoparticles showed preferred orientation in the chitosan matrix with the c-axis parallel to the substrate surface. The films showed corrosion protection of the Nitinol substrates in Ringer's physiological solutions. The feasibility of the fabrication of composite films containing hydroxyapatite and bioglass in the chitosan matrix has been demonstrated. The method offers the advantages of room temperature processing. The deposition mechanisms and possible applications of the films are discussed.     

Preparation of Crosslinked Chitosan/Silk Fibroin Blend Films for Drug Delivery System

Crosslinked chitosan/silk fibroin blend films were prepared by a solution casting technique using glutaraldehyde as crosslinking agent. Drug release characteristics of the blend films with various blend compositions were investigated. Theophylline, diclofenac sodium, amoxicillin trihydrate, and salicylic acid were used as model drugs. The release studies were performed at 37 °C in buffer solutions at pH 2.0, 5.5, and 7.2. It was found that the blend films with 80% chitosan content showed the maximum amount of model drug release at pH 2.0 for all the drugs studied here. This result corresponded to the swelling ability of the blend films. From a swelling study, the maximum degrees of swelling of the drug‐loaded blend films were obtained at this pH and blend composition. The amount of drugs released from the films with 80% chitosan content, from the highest to the lowest values, occurred in the following sequence: salicylic acid > theophylline > diclofenac sodium > amoxicillin.

Comparison of the amounts of drug released from chitosan and the blend film with 80% chitosan content at pH 2.0: (filled) chitosan film, and (blank) blend film with 80% chitosan content (SAL = salicylic acid, THEO = theophylline, DFS = diclofenac sodium, AMX = amoxicillin).     

Multilayer film assembled from charged derivatives of chitosan: physical characteristics and biological responses

Polyelectrolyte multilayer films were successfully assembled from each of the three charged derivatives of chitosan; N-[(2-hydroxyl-3-trimethylammonium)propyl]chitosan chloride (HTACC), N-succinyl chitosan (SCC) and N-sulfofurfuryl chitosan (SFC), paired with one of the two oppositely charged polyelectrolytes, poly(acrylic acid) (PAA) and poly(allylamine hydrochloride) (PAH) on surface-treated poly(ethylene terephthalate) (treated PET) substrates by alternate layer-by-layer adsorption. Surface coverage and wettability of the multilayer films were determined by AFM and water contact angle measurements, respectively. Analysis by quartz crystal balance with dissipation (QCM-D) has suggested that all multilayer films are relatively rigid and have a high water content associated within their structures, accounting for up to 85-90% (w/w) for films having 7-10 layers. In vitro cytocompatibility tests for the fibroblast-like L929 cell line revealed a slight dependency for cell adhesion and proliferation on the outermost layer. The multilayer film containing HTACC exhibited moderate antibacterial activity against E. coli and S. aureus. Bearing negative charges, the multilayer films terminating with SFC and having at least 10 layers were capable of suppressing the adsorption of plasma proteins and platelet adhesion at a comparable level to the multilayer film assembled from heparin, a well-known antithrombogenic polymer.     

Biodegradable biocompatible xyloglucan films for various applications

Polysaccharides are known for their film-forming properties which have been intensively investigated for food and non-food applications. Here we have developed a xyloglucan transparent film for various applications especially in controlled release of drugs and cosmetics. The present study evaluated the properties of the composite films of xyloglucan, chitosan and rice starch obtained by the casting/solvent evaporation method. Xyloglucan chitosan blend film shows better mechanical properties. Hydrophobicity and crystallinity of xyloglucan film was increased by blending with chitosan. This was confirmed by X-ray diffraction studies and contact angle measurements. Scanning electron microscopic observations indicated that the xyloglucan chitosan blend films were smooth and homogenous. Thermogravimetric and differential scannining calorimetric analysis showed a high thermal stability and melting temperature of xyloglucan chitosan film compared with others. The swelling properties of the xyloglucan chitosan blend film, studied as a function of pH showed that the sorption ability of the blend film was high at a pH 7.4. This indicates its controlled release property at that pH. Controlled drug release property of the film was studied by using streptomycin as a model drug.     

壳聚糖膜固定生物活性短肽RGDS的研究

为改善壳聚糖对细胞的特异性吸附,采用水溶性碳二亚胺将生物活性短肽精氨酸-甘氨酸-天冬氨酸-丝氨酸(RGDS)固定到壳聚糖膜的表面,采用X射线光电子能谱检测固定多肽前后的壳聚糖膜表面,发现反应后壳聚糖膜表面氮元素含量增大,Nls和Cls曲线拟合谱中酰胺键增多,表明RGDS短肽已固定到壳聚糖膜的表面;人角膜缘上皮细胞体外培养实验表明,固定RGDS后壳聚糖膜的细胞黏附率有了明显提高,固定RGDS后的壳聚糖膜在角膜组织工程支架等方面有更好的应用潜力。     

Fabrication of Chitosan‐Multiwall Carbon Nanotube Nanocomposite Containing Ferri/Ferrocyanide: Application for Simultaneous Detection of D‐Penicillamine and Tryptophan

We report a simple and effective strategy for fabrication of the nanocomposite containing chitosan (CS) and multiwall carbon nanotube (MWNT) coated on a glassy carbon electrode (GCE). The characterization of the modified electrode (CS‐MWNT/GC) was carried out using scanning electron microscopy (SEM) and UV–vis absorption spectroscopy. The electrochemical behavior of CS‐MWNT/GC electrode was investigated and compared with the electrochemical behavior of chitosan modified GC (CS/GC), multiwalled carbon nanotube modified GC (MWNT/GC) and unmodified GC using cyclic voltammetry (CV) and electron impedance spectroscopy (EIS). The chitosan films are electrochemically inactive; similar background charging currents are observed at bare GC. The chitosan films are permeable to anionic Fe(CN)₆^3?/4? (FC) redox couple. Electrochemical parameters, including apparent diffusion coefficient for the Fe(CN)₆^3?/4? redox probe at FC/CS‐MWNT/GC electrode is comparable to values reported for cast chitosan films. This modified electrode also showed electrocatalytic effect for the simultaneous determination of D‐penicillamine (D‐PA) and tryptophan (Trp). The detection limit of 0.9 μM and 4.0 μM for D‐PA and Trp, respectively, makes this nanocomposite very suitable for determination of them with good sensitivity.     

Magnetic chitosan functionalized with β‐cyclodextrin as ultrasound‐assisted extraction adsorbents for the removal of methyl orange in wastewater coupled with high‐performance liquid chromatography

Three types of choline chloride based deep eutectic solvents were prepared and used to modify magnetic chitosan. The adsorption capacity of the three deep‐eutectic‐solvent‐modified magnetic chitosan/carboxymethyl‐β‐cyclodextrin for removing methyl orange from wastewater was examined. The different deep eutectic solvents were used to strengthen the adsorption capacity of magnetic chitosan. Deep‐eutectic‐solvent‐modified magnetic chitosan/carboxymethyl‐β‐cyclodextrin materials were characterized by Fourier transform infrared spectroscopy and Brunauer–Emmett–Teller surface area measurements. Among the three deep eutectic solvents, choline chloride/glycerol (1:2) modified magnetic chitosan/carboxymethyl‐β‐cyclodextrin showed the highest adsorption capacity to methyl orange. Therefore, choline chloride/glycerol (1:3, 1:4, 1:5, 1:6) deep eutectic solvents were prepared for the assay, and choline chloride/glycerol‐modified magnetic chitosan/carboxymethyl‐β‐cyclodextrin prepared with choline chloride/glycerol (1:3) (volume: 40 μg, contact time: 30 min, and pH: 6) had the best adsorption capacity over the concentration range of 10–200 μg/mL.     

Poly(epsilon-caprolactone)/chitin and poly(epsilon-caprolactone)/chitosan blend films with compositional gradients: fabrication and their biodegradability

Poly(epsilon-caprolactone) (PCL)/chitin and PCL/chitosan blend films with compositional gradients were successfully fabricated by a dissolution/diffusion method; that is, repeatedly pouring the PCL/chitin (or PCL/chitosan) blend solutions, with variable composition, onto polysaccharide layers. The compositional gradient structure in the resulting films was characterized by polarized optic microscopy, ATR-FT-IR and trans-FT-IR microscopic spectroscopy. Enzymatic degradability of the PCL/chitin and PCL/chitosan blend films with compositional gradients in the presence of lysozyme was compared with those of homogeneous films and two-layer films. It was found that the degradation rate of PCL/chitin blend films with a compositional gradient was far lower than that of the neat chitin film, whereas the degradation rate of PCL/chitosan blend films with a compositional gradient was close to that of the neat chitosan film. The suppression of the chitosan crystallization, which accelerates the enzymatic degradation, at the surface of PCL/chitosan films with a compositional gradient was much more severe than that for PCL/chitin films with a compositional gradient.     

Amperometric Biosensors for Glucose Based on Layer‐by‐Layer Assembled Functionalized Carbon Nanotube and Poly (Neutral Red) Multilayer Film

Abstract

Multiwalled carbon nanotubes (MWNTs) were treated with a mixture of concentrated sulfuric and nitric acid to introduce carboxylic acid groups to the nanotubes. Conducting polymer film was prepared by electrochemical polymerization of neutral red (NR). By using a layer‐by‐layer method, homogeneous and stable MWNTs and poly (neutral red) (PNR) multilayer films were alternately assembled on glassy carbon (GC) electrodes. With the introduction of PNR, the MWNTs/PNR multilayer film system showed synergy between the MWNTs and PNR, with a significant improvement of redox activity due to the excellent electron‐transfer ability of carbon nanotubes (CNTs) and PNR. The electropolymerization is advantageous, providing both prolonged long‐term stability and improved catalytic activity of the resulting modified electrodes. The MWNTs/PNR multilayer film modified glassy carbon electrode allows low potential detection of hydrogen peroxide with high sensitivity and fast response time. As compared to MWNTs and PNR‐modified GC electrodes, the magnitude of the amperometric response of the MWNTs/PNR composite‐modified GC electrode is more than three‐fold greater than that of the MWNTs modified GC electrode, and nine‐fold greater than that of the PNR‐modified GC electrode. With the immobilization of glucose oxidase onto the electrode surface using glutaric dialdehyde, a biosensor that responds sensitively to glucose has been constructed. In pH 6.98 phosphate buffer, nearly interference‐free determination of glucose has been realized at ?0.2 V vs. SCE with a linear range from 50 µM to 10 mM and response time <10s. The detection limit was 10 µM glucose (S/N=3).     

壳聚糖-纤维素硫酸钠聚电解质复合物膜对药物表观渗透系数的测试

药物渗透系数是考察复合物膜的药物释放性能的重要参数. 本文以溶解性不同的两种药物扑热息痛和5-氨基水杨酸(5-ASA)为模型药物研究了其在壳聚糖-纤维素硫酸钠聚电解质复合物膜中的渗透性能. 结果表明：壳聚糖-纤维素硫酸钠聚电解质复合物膜的渗透性能与其溶胀性能密切相关;复合物膜中壳聚糖和纤维素硫酸钠的配比、相对分子量和pH值对膜的渗透性能和溶胀性能影响显著,以扑热息痛作为模型药物研究了壳聚糖-纤维素硫酸钠聚电解质复合物膜在模拟胃肠液中对药物的渗透性能. 通过调整该复合物膜的配方,可以使该膜分别实现胃、小肠和结肠定位释药的目的.     

Synthesis,mechanical properties of fluorescent carbon dots loaded nanocomposites chitosan film for wound healing and drug delivery

Fluorescent carbon nanoparticles (CNPs) are a new class of carbon nanomaterials and have demonstrated excellent optical properties, good biocompatibility, great aqueous solubility, low cost, simple synthesis, etc. Since their discovery, various synthesis methods using different precursors have been developed, and are mainly classified as top-down and bottom-up approaches. The contact angle measurements revealed that wettability of plain chitosan film reduced due to addition of carbon nanoparticles. It was found that, impregnation of carbon dots into chitosan film resulted in an almost seven fold decrease in the water absorption capacity of the film. The equilibrium moisture uptake (EMU) data of plain chitosan and CQD-loaded chitosan films were interpreted by GAB isotherm and related parameters were also evaluated. Finally, the moisture permeation capacities of the plain Ch and Carbon dots loaded sample Ch/CNP was found to be 1758 and 956 g/m²/day. In addition, Bovine serum albumin (BSA) adsorption was found 24.2 mg/m² for plain sample while it decreased to 14.1 mg/m² as CDs were incorporated into film matrix. The anti-oxidant property was evaluated in terms of % scavenging of DPPH, SO and Hydroxyl radicals. It was observed that for all the free radicals, % scavenging increased with increase in CDs contents in the films.     

Preparation and properties of water‐soluble chitosan and polyvinyl alcohol blend films as potential bone tissue engineering matrix

The blend film was prepared by casting solutions of water‐soluble hydroxyethyacryl‐chitosan (HEA‐CS) and polyvinyl alcohol (PVA) and cross‐linked by glutaraldehyde. The structure and properties of the blend films were estimated by wide‐angle X‐ray diffraction (WXRD), contact angle measurements with water, and scanning electron microscopy (SEM). The tensile properties of the blend films were investigated and the tensile strength (TS) and the elongation increased with the increased amount of PVA. The thermal stability (thermogravimetric (TG) and derivative thermogravimetric (DTG)) was evaluated and HEA‐CS was more thermally‐stable than that of PVA. The water swelling properties analysis indicated that HEA‐CS in the blends promoted the water absorption owing to its porous structure and the antimicrobial ability of the blend films was retained. Indirect cytotoxicity assessment of the blend films with human bone sarcoma cell (SW1353) indicated that the biomaterials were non‐toxic and did not release substances harmful to living cells. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of immobilization of polysaccharides on the biocompatibility of poly(butyleneadipate‐co‐terephthalate) films

Aiming to improve the hydrophilicity, antibacterial activity, cytocompatibility, and hemocompatibility of poly(butyleneadipate‐co‐terephthalate) (PBAT) films, PBAT films were treated with ozone, grafted with chitosan (CS), and followed by covalent immobilization of either heparin (HEP) or hyaluronic acid (HA). The surface graft density of modified PBAT films was detected by X‐ray photoelectron spectroscopy (XPS) and dyeing. The surface roughness of PBAT films was measured using an atomic force microscope (AFM). After immobilizing CS, PBAT films acquired antibacterial activity against Staphylococcus aureus and Escherichia coli. The adsorption of human serum albumin (HSA) and human plasma fibrinogen (HPF) on PBAT–CS–HEP and PBAT–CS–HA films was lower compared to that of native PBAT. Moreover, HEP immobilization could effectively reduce platelet adhesion and prolong the blood coagulation time, thereby improving the blood compatibility of PBAT. In addition, the growth of L929 fibroblasts was improved for HEP or HA immobilized PBAT, suggesting this surface modification was non‐cytotoxic. Furthermore, PBAT–CS–HEP and PBAT–CS–HA exhibited higher cell proliferation than native PBAT. Copyright © 2009 John Wiley & Sons, Ltd.     

巯基化改性壳聚糖在电化学生物传感器制备中的应用

以壳聚糖、N-乙酰-L-半胱氨酸(NAC)为原料,以1-羟基苯并三唑(HOBt)和1-乙基-3-(3-二甲基胺丙基)碳化二亚胺盐酸盐(EDAC)为缩合剂,合成功能化壳聚糖衍生物巯基壳聚糖(CHS-NAC).用红外光谱(FTIR)、核磁共振(1H-NMR)及X射线衍射(XRD)对其结构进行表征,用Ellman’s试剂通过标准曲线法测得巯基含量.利用CHS-NAC的黏附性,通过层层吸附的方法将CHS-NAC、纳米金及细胞色素c分别修饰到玻碳电极(GC)上,通过扫描电子显微镜(SEM)对修饰电极表面的形貌进行了观察,采用循环伏安和电化学阻抗研究了不同修饰膜电极的电化学行为,及扫描速率对细胞色素c修饰电极的影响,并开展了对过氧化氢的电催化分析.实验结果表明,CHS-NAC能高效地将纳米金及细胞色素c固定在电极表面,并能有效发挥纳米金辅助转移电子及细胞色素c对过氧化氢催化的能力.     

Effect of Poly(amine)s on the Redox Properties of Carboxymethylcellulose and Ferrocene‐modified Poly(amine) Layer‐by‐Layer Films

Multilayer films consisting of carboxymethylcellulose (CMC) and ferrocene‐modified poly(ethyleneimine) (Fc‐PEI) or poly(allylamine hydrochloride) (Fc‐PAH) were successfully prepared on a gold electrode to examine their redox properties. The redox current of (Fc‐PEI/CMC)_n film‐coated electrodes increased with the number of layers, while the (Fc‐PAH/CMC)_n film‐coated electrodes exhibited increased response only for the first eight bilayers. The (Fc‐PEI/CMC)_n and (Fc‐PAH/CMC)_n films deposited on the surface of Fc‐free multilayer film‐coated electrodes also showed a redox response. The (PEI/CMC)₅ film‐coated electrode showed redox responses in Fc‐PEI and Fc‐PAH solutions, confirming the uptake of the Fc‐polymers in the inner film. In contrast, the uptake of the Fc‐polymers in the (PAH/CMC)₅ film was severely suppressed, suggesting that different permeability of (PEI/CMC)₅ and (PAH/CMC)₅ films.     

Characterization of PVA and Chitosan/PVA Blends Prepared from Aqueous Solutions of Various Na2SO4 Concentrations

Uniplaner orientation of a particular crystal plane along the surface of a film was investigated for poly (vinyl alcohol) (PVA) film prepared by a coagulation bath with concentrated aqueous solution containing 100 ∼ 300g of Na₂SO₄ against 1 ℓ of water. The orientation distribution functions of the three crystallographic principal axes of the dried films were obtained by the X-ray diffraction technique. The same treatment was carried out for the films prepared by stretching biaxially of the fresh gel and then by drying the resultant fresh gel. The very high preferential orientation of the crystal chain axes and amorphous chain segments could be realized by the biaxially elongation. Accordingly, the techniques were applied to the biaxially stretching of chitosan and PVA blend films with high Young's modulus. The planer orientation of the chain axes of chitosan and PVA crystallites could be confirmed. The morphology of the film surface was estimated by measurements of contact angle and electron spectroscopy for chemical analysis. The results suggested that the admixture of chitosan decreases wet ability of the specimen and this tendency was slightly enhanced by the biaxially elongation.     

Conductive thin film formation onto radiation grafted polymeric surfaces using electroless plating technique

Surface modification of polypropylene films (PP) was carried out via radiation induced graft copolymerization of 4‐vinyl pyridine (4VP) and acrylamide (AAm) to enhance the adhesion ability of the PP surface for electroless deposition of copper. Factors affecting the grafting process such as suitable solvent, comonomer composition and concentration and irradiation dose were optimized. The grafted films produced were characterized by studying their Fourier‐transform infrared (FTIR) spectra and thermal stability. The grafted films were copper‐plated by electroless deposition using Pd as the catalyst to initiate the redox reaction. The influence of catalytic activation method parameters on the plating rate were studied. Scanning electron microscopy revealed a dense and void‐free copper deposited film. The adhesion of the deposited copper film to the modified PP films was determined by measuring the tensile strength of the copper plated films. The electrical characteristics of the copper plated films in comparison with grafted films were studied. The results showed the high adhesion of the deposited copper film to the grafted PP film as well as the high electrical conductivity. Copyright © 2008 John Wiley & Sons, Ltd.     

Chromium (VI) ion adsorption features of chitosan film and its chitosan/zeolite conjugate 13X film

This research evaluated the importance of the adsorption properties of chitosan a chitosan/zeolite conjugate film for the removal of Cr(VI) ions from solutions in the 5-260 mg/L concentration range, when the pH was adjusted to 4.0 and 6.0. The uptake capacities of the films formed by chitosan and by the chitosan/zeolite conjugate were calculated by mass balance. The equilibrium isotherms were fitted to the Langmuir, Freundlich and Redlich-Peterson models. The chitosan film seems to be a good sorbent for Cr(VI) at pH 4, but its physical instability suggests the need for a more resilient support. Due to this fact zeolite was added to the chitosan matrix in solution and a chitosan/zeolite (CS/Zeo) film was thus formed. The solubility of the film and the characterization of the different matrices by FTIR, TGA and X-Ray showed that a cross-linked structure was formed between the chitosan and zeolite and the solubility of the film increased. In this study, the low manufacturing cost of the CS/Zeo matrix, the good uptake of Cr(VI) at acidic pH (17.28 mg/g) and the non desorption of Cr(VI) from the film in water suggests this combination should be tested in industrial environment.