Synthesis and thermal crosslinking of benzophenone‐modified poly(dimethylsiloxane)s

Dihydridocarbonyltris(triphenylphosphine)ruthenium catalyzes the regiospecific anti‐Markovnikov addition of an ortho C? H bond of benzophenone across the C? C double bonds of α,ω‐bis(trimethylsilyloxy)copoly(dimethylsiloxane/vinylmethylsiloxane) (99:1), α,ω‐bis(vinyldimethylsilyloxy)poly(dimethylsiloxane), and 1,3‐divinyltetramethyldisiloxane to yield α,ω‐bis(trimethylsilyloxy)copoly[dimethylsiloxane/2‐(2′‐benzophenonyl)ethylmethylsiloxane]), α,ω‐bis[2‐(2′‐benzophenonyl)ethyldimethylsilyloxy]poly(dimethylsiloxane), and 1,3‐bis[2‐(2′‐benzophenonyl)ethyl]tetramethyldisiloxane, respectively. These materials have been characterized with ¹H, ¹³C, and ²⁹Si NMR and IR spectroscopy. Their molecular weight distributions have been determined by gel permeation chromatography. The thermal stability of the polymers has been measured by thermogravimetric analysis, and their glass‐transition temperatures (T_g's) have been determined by differential scanning calorimetry. The molecular weight distribution, thermal stability, and T_g's of the modified polysiloxanes are similar to those of the precursor polymers. The molecular weights of these materials can be significantly increased via heating to 300 °C for 1 h. This may be due to crosslinking, by pyrocondensation, of pendant anthracene groups, which are produced by the pyrolysis of the attached ortho‐alkyl benzophenones. UV spectroscopy of the pyrolysate of 1,3‐bis[2‐(2′‐benzophenonyl)ethyl]tetramethyldisiloxane has confirmed the presence of pendant anthracene groups. Thermal crosslinking by the pyrocondensation of pendant anthracene groups has been verified by the pyrolysis of α,ω‐bis(trimethylsilyloxy)copoly[dimethylsiloxane/2‐(9′‐anthracenyl)ethylmethylsiloxane] (97:3). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5514–5522, 2004     

Synthesis and thermal crosslinking of carbosiloxane and oligo(oxyethylene) polymers

Acyclic diene metathesis (ADMET) polymerization has been used in the synthesis of telechelic materials using alkoxy‐functionalized carbosiloxane or oligo(oxyethylene)‐based polymers, varying from internal to terminal cured materials or the combination of them. Previous investigations demonstrated that introduction of chain‐end crosslinking improves the stress–strain behavior of such materials. A series of saturated and unsaturated carbosiloxane and oligo(oxyethylene)‐based polymers were synthesized by ADMET polymerization using silacyclobutane as chain‐end, thermally induced crosslinker. The carbosiloxane derivatives presented pure amorphous behavior, whereas the oligo(oxyethylene) polymers were semicrystalline. The thermal curing process was monitored by differential scanning calorimetry via the exotherm between 160 and 210 °C. Mechanical properties on thermoset polymers were measured, where cured polymers showed moduli from 0.6 to 9.3 MPa, tensile strengths from 0.3 to 1.0 MPa, and elongations from 12 to 76%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Poling and crosslinking processes in NLO polymers

A series of photocrosslinkable polymers bearing hyperpolarizable side chain chromophores was synthesized, poled and evaluated on the basis of the thermal stability of Second Harmonic Generation (SHG). Photoinitiation allowed for control of the onset of curing. Crosslinking was monitored by infrared spectroscopy and optimal conversion was achieved by applying a slow temperature ramp during exposure. The ultimate stability of the poled polymers was directly related to the number of crosslinking substituents that were attached to the chromophore pendant group. With two reactive groups per chromophore significant SHG was retained at temperatures above the initial polymer glass transition temperature. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2769–2775     

Efficient carbonyl hydrosilylation reaction: Toward EVA copolymer crosslinking

In this article, the hydrosilylation reaction of carbonyl groups of acetate derivatives and SiH groups of hydride‐terminated polydimethylsiloxane at high temperature (100–130 °C) are described. Triruthenium dodecacarbonyl, Ru₃(CO)₁₂, was used as effective catalyst for hydrosilylation reaction. The hydrosilylation reactions with octyl acetate and 4‐heptyl acetate were investigated by multinuclear NMR spectroscopy (¹H, ¹³C, and ²⁹Si). This work provides evidence of the addition reaction of SiH groups onto carbonyl groups. The influence of the nature of the acetate structure on the reaction kinetics was shown and the slight contribution of side reactions at high temperature highlighted. Hydrosilylation reaction was extent to the crosslinking of ethylene‐vinyl acetate (EVA) copolymer in the same range of temperature. The formation of EVA chemical network was demonstrated by HR‐MAS NMR spectroscopy and by measuring the gel fraction of EVA chains in hot toluene. From Flory theory, the crosslinking density of elastic strand was calculated to be 80 mol m^?3 in agreement with the measurements from swelling ratio (VA/SiH molar ratio: 11.8). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of three‐dimensional poly(dimethylsiloxane) (PDMS) with movable cross‐linking

A pentamethylcyclotrisiloxane moiety was introduced into cyclic polystyrene (cPSt) and cyclic PDMS (cPDMS) to obtain noncovalent cross‐linking agents, D₃‐cPSt and D₃‐cPDMS, respectively. Anionic ring‐opening polymerization of octamethylcyclotetrasiloxane (D₄) in nitrobenzene was carried out in the presence of D₃‐cPSt to obtain a cloudy white PDMS gel as a precipitation. On the other hand, bulk copolymerization of D₃‐cPDMS with D₄ proceeded in a homogeneous state to give a colorless transparent PDMS gel in high yield. The formation of mechanically linked PDMS with movable cross‐linking was indicated by control experiment. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5882–5890, 2009     

In situ Synthesis of Metal Nanoparticle Embedded Free Standing Multifunctional PDMS Films

We demonstrate a simple one‐step method for synthesizing noble metal nanoparticle embedded free standing polydimethylsiloxane (PDMS) composite films. The process involves preparing a homogenous mixture of metal salt (silver, gold and platinum), silicone elastomer and the curing agent (hardener) followed by curing. During the curing process, the hardener crosslinks the elastomer and simultaneously reduces the metal salt to form nanoparticles. This in situ method avoids the use of any external reducing agent/stabilizing agent and leads to a uniform distribution of nanoparticles in the PDMS matrix. The films were characterized using UV‐Vis spectroscopy, transmission electron microscopy and X‐ray photoemission spectroscopy. The nanoparticle‐PDMS films have a higher Young's modulus than pure PDMS films and also show enhanced antibacterial properties. The metal nanoparticle‐PDMS films could be used for a number of applications such as for catalysis, optical and biomedical devices and gas separation membranes.

     

In situ real-time study of crosslinking kinetics in thermal and microwave fields

A comparative investigation has been conducted of the mechanisms and rate of chemical reactions in thermal and microwave fields. A number of nonpolymer-forming and polymer-forming mixtures of different functionality and molecular architecture were prepared and investigated. The advancement of reactions in thermal and microwave fields was monitored in real time by in situ remote near-infrared spectroscopy. The principal finding was that the use of microwaves in lieu of thermal heating had no effect on the mechanism or kinetics during the isothermal cure of various epoxies, polyimides and bismaleimides. No “microwave effect” was observed and it was concluded that the claims of “accelerated kinetics” in the microwave field are unfounded. However, a comparison between thermal and microwave cure assumes a whole new dimension when the temperature distribution inside the sample is considered, and that constitutes a scientifically challenging area that warrants further research. © 1998 John Wiley & Sons, Ltd.     

PCL-based Shape Memory Polymers with Variable PDMS Soft Segment Lengths

Thermoresponsive shape memory polymers (SMPs) are stimuli-responsive materials that return to their permanent shape from a temporary shape in response to heating. The design of new SMPs which obtain a broader range of properties including mechanical behavior is critical to realize their potential in biomedical as well as industrial and aerospace applications. To tailor the properties of SMPs, "AB networks" comprised of two distinct polymer components have been investigated but are overwhelmingly limited to those in which both components are organic. In this present work, we prepared inorganic-organic SMPs comprised of inorganic polydimethyl-siloxane (PDMS) segments of varying lengths and organic poly(ε-caprolactone) (PCL) segments. PDMS has a particularly low T(g) (-125 °C) which makes it a particularly effective soft segment to tailor the mechanical properties of PCL-based SMPs. The SMPs were prepared via the rapid photocure of solutions of diacrylated PCL(40)-block-PDMS(m)-block-PCL(40) macromers (m = 20, 37, 66 and 130). The resulting inorganic-organic SMP networks exhibited excellent shape fixity and recovery. By changing the PDMS segment length, the thermal, mechanical, and surface properties were systematically altered.     

Poly(siloxane‐urethane) crosslinked structures obtained by sol‐gel technique

Poly(siloxane‐urethane) crosslinked structures were prepared from isophorone diisocyanate, α,ω‐bis(hydroxybutyl)oligodimethylsiloxane and a new hybrid diol containing hydrolysable Si? OC₂H₅ groups besides OH groups. The latest was synthesized by the acid‐catalyzed reaction between 1,3‐bis(3‐glycidoxypropyl)tetramethyldisiloxane and 3‐aminopropyltriethoxysilane. The formations of the urethane groups along the polymer backbone as well as the formation of the silica domains were first confirmed by the presence of the specific bands in Fourier transform infrared spectra. The resulted materials were characterized using differential scanning calorimetry, thermogravimetric analysis and scanning electron microscopy. The results of the dynamic mechanical analysis (DMA) performed at various frequencies revealed shape memory capabilities for some of the obtained structures. The silica formed because of the hydrolysis‐condensation reactions proved to have reinforcing effect upon siloxane‐urethane structure also evidenced by DMA and increasing water vapor sorption capacity as was measured by dynamic vapor sorption. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

New method for post-processing crosslinking reaction

A new processing method to process functionalized polymer materials that are able to crosslink has been developed. The crosslinking reaction occurs after the melt processing stage at moderate temperature and without the addition of external reagents. Maleic anhydride-ethylene copolymer was processed with 1,4-butanediol in the presence of para-toluene sulfonic acid as catalyst. To prevent the reaction in the melt, it was chosen to trap the 1,4-butanediol onto vector particles. The extent of the crosslinking reaction during the mixing at 110 °C has been studied for three different particles taken as vector particles. It was found that Orgasol^® polyamide particles are efficient to inhibit the crosslinking reaction in the mixer. The reaction then takes place at 40 °C and after 100 h the cured samples appeared to be highly and homogeneously crosslinked with a gel content above 90%.     

Synthesis and characterization of novel PDMS nanocomposites using POSS derivatives as cross‐linking filler

We report the synthesis and characterization of novel elastomeric nanocomposites containing polyhedral oligomeric silsesquioxanes (POSS) as both the cross‐linker and filler within a polydimethylsiloxane (PDMS) polymer matrix. These polymer composites were prepared through the reaction of octasilane‐POSS (OS‐POSS) with vinyl‐terminated PDMS chains using hydrosilylation chemistry. In addition, larger super‐POSS cross‐linkers, consisting of two pendant hepta(isobutyl)POSS molecules attached to a central octasilane‐POSS core, were also used in the fabrication of the PDMS composites. The chemical incorporation of these POSS cross‐linkers into the PDMS network was verified by solid‐state ¹H magic angle spinning NMR. Based on dynamic mechanical analysis, the PDMS nanocomposites prepared with the octafunctional OS‐POSS cross‐linker exhibited enhanced mechanical properties relative to polymer systems prepared with the tetrafunctional TDSS cross‐linker at equivalent loading levels. The observed improvements in mechanical properties can be attributed to the increased dimensionality of the POSS cross‐linker. The PDMS elastomers synthesized from the larger super‐POSS molecule showed improved mechanical properties relative to both the TDSS and OS‐POSS composites due to the increased volume‐fraction of POSS filler in the polymer matrix. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2589–2596, 2009     

Creation of crosslinkable interphases in polymer blends

A new type of bi- and trifunctional coupling agents containing 2-oxazoline and/or 2-oxazinone as well as hydrosilane moieties has been prepared by hydrosilylation of the corresponding allyl ether containing precursors with poly(methylhydro)siloxanes. In heterogeneous model blends based on mono-carboxylic acid terminated polystyrene (PS) and mono-amine terminated polyamide 12 (PA), the oxazoline and oxazinone units can selectively react with the carboxylic groups or amino groups, respectively. Under this mixing conditions the hydrosilane partially crosslinks. The morphology development of the three-component blends under melt mixing conditions is a rather complex process. We have shown that the coupling agents are immiscible with the polymers and form their own phase. Under proper processing conditions they locate at least partially at the PS/PA interface and can be used for further modification of the blend interphase, e.g. for crosslinking by hydrolysis. This crosslinking can be accelerated by the addition of a Pt-catalyst during the melt mixing.     

A constant shear stress strategy for establishing in situ viscosity models of photoinduced polymerization of acrylamide

In situ viscosity kinetics models for blue light induced radical polymerization of acrylamide (AM) were proposed and established with camphorquinone/4-(dimethylamino)-2-ethylbenzoate/diphenyl iodonium hexafluorophosphateas the photoinitiators. In order to minimize the impact of shear effect on polymer network, a constant shear stress technique of photo-rheometry was proposed to characterize in-situ viscosity behavior of acrylamide solution during the photopolymerization. The effect of various factors, for example, the dosages of initiator, monomer, and light intensities, on viscosity, polymerization and gelation behavior of AM solution was systematically analyzed. The viscosity advancement behavior was shaped by the joint action of the movement, growth and entanglement of molecular chains, and shear orientation. Different power-law kinetic models were found in three curves, time-related viscosity, shear rate-related viscosity and time-related shear rate. Such school of thought on constructing the viscosity advancement model provides a new theory and method of systematical studying on the photorheological theories. Furthermore, a trinitarian theoretical model that represented the access from the microscopic kinetics of free radical polymerization to the movement behavior of polymer chains was successfully established by mapping the photoinduced viscosity kinetics model onto the polymerization and crosslinking kinetics model.     

Evaluation of thiol‐ene click chemistry in functionalized polysiloxanes

Polysiloxanes are commonly used in a myriad of applications, and the “click” nature of the thiol‐ene reaction is well suited for introducing alternative functionalities or for crosslinking these ubiquitous polymers. As such, understanding of the thiol‐ene reaction in the presence of silicones is valuable and would lead to enhanced methodologies for modification and crosslinking. Here, the thiol‐ene reaction kinetics were investigated in functionalized oligosiloxanes having varying degrees of thiol functionalization (SH), π–π interactions (from diphenyls, DP), and ene types (C?C). In the ene‐functionalized oligomers, π–π interactions were controlled through the use of dioctyl repeats (DO). The polymerization rate and rate‐limiting steps were determined for all systems containing an allyl‐functionalized oligomer, and rates ranging from 0.10 to 0.54 mol L^?1 min^?1 were seen. The rate‐limiting step varied with the oligomer composition; examples of rate‐limited propagation (5:3:2 C?C:DP:DO/1:1 SH:DP) or chain transfer (5:3:2 C?C:DP:DO/3:1 SH:DP) were found in addition to cases with similar reaction rate constants (5:2:3 C?C:DP:DO/1:1 SH:DP). None of the siloxanes were found to exhibit autoacceleration despite their relatively high viscosities. Instead, the allyl‐, vinyl‐, and acrylate‐functionalized siloxanes were all found to undergo unimolecular termination based on their high α scaling values (0.98, 0.95, and 0.82, respectively) in the relation R_p ∝ R_i^α. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Effect of crosslinking polymer networks on the molecular reorientation and electro‐optical performance of in‐plane switching vertically aligned liquid crystal devices

The effects of crosslinking polymer networks (PNs) on the molecular reorientation and electro‐optical properties of vertically aligned (VA) liquid crystal (LC) devices are investigated by applying an in‐plane switching (IPS) electric field. Through the polymerization process, crosslinking PNs are developed on the substrate surface, effectively increasing the anchoring energy and governing the LC molecular reorientation. With its stronger anchoring effect, the PNs cell shows good light transmittance and excellent vertical alignment quality, as compared to the pure LC cell. Furthermore, the alignment transformation and transmittance bounce resulting from the transient process of LC molecular reorientation are eliminated when the cell is operated at high voltages. The rising‐time (t_r) and falling‐time (t_f) responses of the PNs cell are significantly improved, and around 36% improvement in the optical switching response is obtained. In addition, the dynamic gray‐level t_r and t_f responses of the PNs cell are enhanced by around 55% and 42%, respectively, at a low driving voltage (～12 V). This developed VA‐IPS LC/PNs cell benefits not only the LC molecular alignment but also the electro‐optical performance. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1123–1130     

Exploring the effect of radiation crosslinking on the physico‐mechanical,dynamic mechanical and dielectric properties of EOC–PDMS blends for cable insulation applications

This work focuses on the effect of electron beam irradiation on the physico‐mechanical, dynamic mechanical and dielectric properties of blends based on ethylene octene copolymer (EOC) and poly dimethyl siloxane (PDMS) rubber. It is found that electron beam irradiation caused considerable improvement in the physico‐mechanical properties; the tensile strength was enhanced by nearly 35% for 70:30 EOC:PDMS blend. Phase morphology of the blends analyzed before irradiation by scanning electron microscopy (SEM) exhibited droplet/matrix morphology with sizes of the PDMS rubber domain varying from 0.55 µm to 0.47 µm as the amount of PDMS rubber decreased from 30 wt% to 10 wt%. This reduction in the PDMS rubber domain has been correlated with the physico‐mechanical properties of the blends. Further, the dynamic mechanical properties and creep behavior of these EOC:PDMS blends before and after irradiation has been studied. It is inferred that the 70:30 blend after radiation crosslinking shows a 17% decrease in the creep compliance, i.e. higher creep resistance compared to neat blends. All the radiation crosslinked blends exhibited lower dielectric constant, lower dielectric loss and higher electrical resistivity as compared to the virgin blends which makes it suitable for cable insulating application. Copyright © 2016 John Wiley & Sons, Ltd.     

Self‐crosslinking borate anions for the production of tough UV‐cured polyelectrolyte surfaces

The first anion with four polymerizable groups has been synthesized and used to produce durable, crosslinked polyelectrolyte (PE) coatings in a single step. Sodium tetrakis(4‐vinylphenyl)borate (NaBSty₄) was produced by the reaction of BCl₃ and the Grignard of 4‐bromostyrene. The full series of borates NaBPh_xSty_4?x, x = 1?3, were also synthesized analogously by reaction of the styryl‐Grignard and PhBCl₂, Ph₂BCl, or Ph₃B. Anion exchange of the borates with tributyl 4‐vinylbenzylphosphonium chloride gave a family of organic salts developed for applications in photopolymerized coatings. The percent UV cure of the polymer films was determined by infrared spectroscopy and this relative level of curing was corroborated by differential scanning calorimetry analysis. The degree of crosslinking imparted to the polymer films by the different monomers has resulted in varied mechanical properties, which were probed by diamond tip scratch tests and nanoindentation. These clearly demonstrated that as the number of polymerizable groups increased, the film hardness increased correspondingly. The final hardness of the films exceeds those of other related systems and identifies styryl borates as viable crosslinking additives in UV curable technologies, especially in the production of durable PE films. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Sequential crosslinking for mechanical property development in high sulfur content composites

This report details how sequential crosslinking processes can be applied to develop properties in sulfur-bisphenol A composites. Olefinic carbons were first crosslinked by inverse vulcanization (InV) at 180°C and then aryl carbon crosslinking was affected via radical-induced aryl halide-sulfur polymerization (RASP) at 220°C. To demonstrate that these two crosslinking mechanisms are orthogonal and can be used to affect stepwise property changes, O,O′-diallyl-2,2′,5,5′-tetrabromobisphenol A was selected as a comonomer. After InV of the monomer with 90 wt% sulfur, a flexible plastic material having an elongation at break of 89% was obtained, whereas after heating this premade polymer to initiate RASP, the polymer develops a threefold increase in its tensile strength and has an elongation at break of only 29%. The sequential crosslinking strategy demonstrated herein thus provides an innovative approach to tuning the properties of high sulfur-content materials.     

Spectroscopic evidence for radiation-induced crosslinking of poly(tetrafluoroethylene)

Direct spectroscopic evidence for radiation-induced crosslinking of poly(tetrafluoroethylene) (PTFE) is presented for all x-ray and electron dose levels above which it is possible to distinguish between deliberately introduced radiation damage and the x-ray damage inherent in obtaining an x-ray photoelectron spectrum (XPS). The C (1s) spectrum obtained after irradiation with 2 keV electrons for all doses greater than 1 μA-min/cm² consists of a four-peak spectrum identical to that previously obtained for plasma-polymerized tetrafluoroethylene and assigned to carbon atoms with variable numbers of bound F atoms (CF₃, CF₂, CF₁, and CF₀). X-ray irradiated PTFE can be fitted with the same four-peak spectrum. At or below an electron dose level of 1 μA-min/cm², the radiation damage is comparable to that produced by the x-ray dose necessary to obtain an XPS spectrum. The CF₁ and CF₀ components increase with increasing electron dose, and at high electron doses dominate the spectrum. With increasing dose the CF₃ component approaches a constant value while both the CF₂ component and the total F : C ratio decreases. These four components are those expected to result from radiation-induced crosslinking reactions of the polymer and are consistent with previous suggestions that crosslinking is the basis of radiation patterned adhesion to PTFE. © 1993 John Wiley & Sons, Inc.     

Influence of mechanical properties,toughness, and barrier properties of PMMA‐EVA‐organoclay nanocomposites with and without in situ crosslinking

Poly methyl methacrylate (PMMA)‐ethylene vinyl acetate (EVA)‐organoclay nanocomposites were prepared with and without in situ crosslinking using tetrapropoxysilane (TPOS) as a crosslinking agent and dibutyl tin oxide (DBTO) as a catalyst. Brabender Plasticorder experimental results suggest that in situ crosslinking transforms the EVA from a liquid to a viscoelastic solid. Transmission electron micrographs analysis indicates that most of the organoclay was clustered in the crosslinked EVA phase. X‐ray diffraction and morphology indicate that the PMMA‐EVA‐organoclay nanocomposites were intercalated and incompatible. Dynamic mechanical analysis (DMA) results indicate some interaction between PMMA‐EVA‐clay nanocomposites. The in situ crosslinked of EVA and the addition of organoclay increased the modulus properties of PMMA. However, in situ crosslinking slightly reduced the barrier properties of PMMA‐EVA‐organoclay nanocomposites. Copyright © 2009 John Wiley & Sons, Ltd.