Local forms of molecular mobility in comb-shaped chromophore-containing copoly(methacrylates)

The local forms of molecular mobility of comb-shaped random copoly(methacrylates) have been studied by the method of dielectric spectroscopy. Side branches of these copolymers are composed of alternating chromophore-containing chains and flexible fluoromethylene sequences. Two regions of relaxation of dipole polarization, γ₂ and β processes, related to the mobility of end polar groups and the reorientation of chromophore groups relative to their long axes, respectively, have been discovered in the glassy state. The times of relaxation of the γ₂ process depend on the ratio between the flexible and rigid parts of the copolymer. In the region of the β process, the molecular mobility appears to be slightly dependent on the chromophore structure and its intensity is determined by the degree of substitution of chromophore groups.     

Molecular design of nonlinear optical polymer based on DCM to enhance the NLO efficiency and thermal stability

This study synthesized and characterized a novel series of polyurethanes containing nonlinear optic (NLO) chromophores, which possess different dimensional or various isolation‐groups. These chromophores are based on 4‐(dicyanomethylene)‐2‐methyl‐6‐(p‐(dimethylamino)styryl)‐4H‐pyran (DCM‐typed dye). The NLO polyurethane containing a one‐dimensional isolation‐group of chromophores efficiently enhances thermal stability, but poling efficiency is not always improved as the size of isolation‐group increases. The enormous isolation group restrained the mobility of chromophore in the polymer matrix and shows a worsening SH intensity. The maximum second harmonic coefficient (d₃₃ = 68.7 pm/V) is displayed as benzene is attaching to chromophore moieties as isolation‐group in this study. Polyurethane containing two‐dimensional chromophore shows superior thermal stability due to the large volume required to rotate the chromophore in the polymer matrix. Two‐dimensional system exhibits lower SH intensity due to the rigid polymer main chain and twisted conjugated plane. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4937–4949, 2009     

Linear‐dendritic block copolymer hosts for the encapsulation of electro‐optic chromophores via H‐Bonding

Linear‐dendritic block copolymer hosts were synthesized by end‐functionalizing poly(methylmethacrylate) with dendrons that acted as hydrogen‐bonding acceptors for nonlinear optical chromophores. Second harmonic generation experiments indicate that the d₃₃ coefficients and maximum chromophore loading are increased in linear‐dendritic block copolymer hosts over comparable homopolymer hosts. Transmission electron microscopy shows 5–10 nm chromophore domains, confirming the effective spatial dispersion of the chromophores. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5017–5026, 2009     

Pockels-effect relaxation in poled side chain polymers: Decoupling of chromophor reorientation from α-relaxation

 The relaxation of the polar order of poled side chain polymers carrying NLO-active chromophores was monitored by Pockels-effect relaxation studies. Dielectric relaxation investigations were performed in order to analyze the coupling or decoupling of the chromophore reorientation to the relaxation modes of the side chain polymers. It was found that the chromophores perform their own reorientation relaxation mode both in the molten and the glassy state, which is not coupled to backbone relaxations. The chromophore reorientation process is characterized by a narrow distribution of the relaxation times and high activation energies. Studies on physical aging reveal that the chromophore reorientation is controlled by the free volume. The chromophore reorientation process can be influenced by the chemical linkage of the chromophore to the polymer backbone and by the nature of the backbone. Received: 1 August 1996 Accepted: 22 November 1996     

Preparation of side‐on bisazobenzene‐containing homopolymers and block copolymers via ATRP and studies on their photoisomerization and photoalignment behaviors

The preparation of a series of novel homopolymers and copolymers containing bisazobenzene chromophores with side‐on structure in the side chains via atom transfer radical polymerization (ATRP) were presented. UV–vis spectra of the thin films of these polymers under irradiation of 488 nm Ar⁺ laser suggested that the photoisomerization of the bisazobenzene chromophores happened mainly on one of the two azo groups in the bisazobenzene chromophores with similar probability due to their side‐on structure. Good photoalignment behaviors of these polymers were proved by photoinduced birefringence measurements because side‐on structure permitted the two azo groups in the bisazobenzene chromophores both participated in the trans–cis–trans photoisomerization cycles equally to induce the whole chromophore reorientation. Furthermore, the reorientation axis located at the middle of chromophore decreased the sweep volume during photoalignment. The impetus for this study was to evaluate the photoisomerization and photoalignment process of side‐on bisazobenzene‐containing polymers and to find possible applications in the photosensitive devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3460–3472, 2007     

Synthesis and characterization of well‐defined polystyrene and poly(ε‐caprolactone) hetero eight‐shaped copolymers

Well‐defined hetero eight‐shaped copolymers composed of polystyrene (PS) and poly(ε‐caprolactone) (PCL) with controlled molecular weight and narrow molecular weight distribution were successfully synthesized by the combination of ring‐opening polymerization, ATRP, and “click” reaction. The synthetic procedure involves three steps: (1) preparation of a tetrafunctional PS and PCL star copolymer with two PS and two PCL arms using the tetrafunctional initiator bearing two hydroxyl groups and two bromo groups; (2) synthesis of tetrafunctional star copolymer, (α‐acetylene‐PCL)₂(ω‐azido‐PS)₂, by the transition of terminal hydroxyl and bromo groups to acetylene and azido groups through the reaction with 4‐propargyloxybutanedioyl chloride and NaN₃ respectively; (3) intramolecular cyclization reaction to produce the hetero eight‐shaped copolymers using “click” chemistry under high dilution. The ¹H NMR, FTIR, and gel permeation chromatography techniques were applied to characterize the chemical structures of the resulted intermediates and the target polymers. Their thermal behavior was investigated by DSC, and their crystallization behaviors of PCL were studied by polarized optical microscopy. The decrease in chain mobility of the eight‐shaped copolymers restricts the crystallization of PCL and the crystallization rate of PCL is slower in comparison with their corresponding star precursors. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6496–6508, 2008     

Molecular mobility of a comb-shaped copolymethacrylate with chalcone chromophore-containing side groups

The molecular mobility of copolymethacrylate with chromophore-containing chalcone side chains is studied by broadband dielectric spectroscopy. Five regions of dipolar polarization relaxation are identified: namely, γ, β, β₁, α, and δ processes. It is shown that γ and β1 processes are related to the local mobility of methylene sequences and ester groups adjoining the backbone, while the α process is associated with the cooperative segmental mobility of the backbone. The β and δ processes are attributed to the mobility of chalcone groups: the local mobility in the glassy state (reorientation relative to the long axis of chromophores) and the cooperative mobility in the rubbery state (reorientation relative to the short axis of chromophores), respectively. The incorporation of 20% chalcone groups does not change the glass-transition temperature but enhances the cooperativity of the α process and intermolecular interactions.     

Local modes of molecular mobility in comb-shaped liquid crystalline ionomers containing alkaline metal ions

Molecular mobility of the comb-shaped copolymer poly(4-[6-(acryloyloxy)hexyloxy]benzoic acid-co-butyl acrylate) and Li- and Rb-containing LC ionomers based on this polymer was studied at low temperatures by the methods of dielectric spectroscopy and thermally stimulated depolarization current. The above copolymers are shown to experience the γ₂, γ₁, and β-processes, which are related by the reorientation of the end СООН groups, by the mobility of a spacer, and by the reorientation of mesogenic fragments (dimers of oxybenzoic acids) with respect to a long axis, respectively. The formation of multiplet structures in ionomers leads to a suppression of the intensity of the β-process that relates with a partial breakdown of hydrogen-bonded dimmers and with a decrease of their molecular mobility.     

Dielectric relaxation behavior of poly(methyl methacrylate) under high‐pressure carbon dioxide

An in situ dielectric measurement for atactic poly(methyl methacrylate) (at‐PMMA) was performed under high‐pressure CO₂ under various pressures and temperatures. The at‐PMMA has the acetate side group with a large dipole moment. In the glassy state, a local relaxation process (β‐process) can be observed using dielectric measurement. In the rubbery state, the micro‐Brownian motion of main chain (α‐process) occurs, and the β‐process changes into αβ‐process coordinated with the α‐process. The dielectric loss (ε″) spectrum of at‐PMMA in the glassy state is asymmetric because of the density fluctuation for the amorphous structure. The loss peak frequency shifted to higher frequencies, and the relaxation strength increased with increasing CO₂ pressure. In the glassy state, the shape of ε″ spectrum became more symmetric with increasing CO₂ pressure. These show that the molecular mobility enhanced by the plasticization effect of CO₂ allows the dipolar side groups in the high‐density region to contribute to the relaxation process. We also found that the apparent activation energy decreased under high‐pressure CO₂. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2951–2962, 2005     

Functionally integrated liquid crystalline photochromic triple block copolymer with locally light‐ and thermal‐controllable sub‐blocks

Photoorientation and reorientation processes induced by illumination of the samples with oppositely directed polarized light and by the thermal treatment were studied for the films of triblock copolymer pAzo₁₀‐b‐pPhM₈₀‐b‐pAzo₁₀ consisting of a nematic phenyl benzoate сentral sub‐block (PhM, DP = 80) with two terminal smectic azobenzene sub‐blocks (Azo, DP = 10). For amorphized films of triblock copolymer, illumination with polarized light (λ = 546 nm) is shown to be by orientation of only Azo‐containing groups, but upon following annealing of the film, PhM groups are adjusted to the orientation of Azo fragments. It was found, that the subsequent illumination of the block copolymer sample with oppositely directed polarized light changes the orientation of azobenzene groups, while the orientation of phenyl benzoate groups is remained unchanged. Thus, the cyclic illumination of the triblock copolymer samples by the linear polarized light and subsequent thermal treatment make it possible to control and fix orientation of azobenzene and phenyl benzoate groups located in different sub‐blocks in the desired and independent manner. The comparison of these results with the data on random p(Azo₇‐ran‐PhM₃₀) copolymer of the similar composition revealed, that in the random copolymer, both Azo and PhM mesogenic groups are involved in the orientational cooperative process regardless of films process treatment. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1602–1611     

Molecular mobility in comb-shaped copoly(methacrylates) with fluoromethylene and chromophore-containing side chains

The molecular mobility of copoly(methacrylates) with chromophore-containing side groups of various structures has been studied by the dielectric method. The region of relaxation of dipole polarization related to the segmental mobility (α process) has been discovered. At temperatures that are ～30°C higher than those corresponding to the α process, the relaxation transition reflecting the reorientation of chromophore-containing side groups (δ process) takes place. It is suggested that the occurrence of the δ process is a general phenomenon for such systems. This effect allows one to determine the temperature at which the polarization of polymer films under application of corona discharge should be carried out so that a high level of nonlinear optical properties associated with the macroscopic noncentrosymmetrical orientation of chromophores may be achieved.     

Comparison of mechanical and molecular measures of mobility during constant strain rate deformation of a PMMA glass

We performed constant strain rate deformation and stress relaxation on a poly(methyl methacrylate) glass at T_g – 19 K, utilizing three strain rates and initiating the stress relaxation over a large range of strain values. Following previous workers, we interpret the initial rate of decay of the stress during the relaxation experiment as a purely mechanical measure of mobility for the system. In our experiments, the mechanical mobility obtained in this manner changes by less than a factor of 3 prior to yield. During these mechanical experiments, we also performed an optical measurement of segmental mobility based on the reorientation of a molecular probe; we observe that the probe mobility increases up to a factor of 100 prior to yield. In the post‐yield regime, in contrast, the mobilities determined mechanically and by probe reorientation are quite similar and show a similar dependence on the strain rate. Dynamic heterogeneity is found to initially decrease during constant strain rate deformation and then remain constant in the post‐yield regime. These combined observations of mechanical mobility, probe mobility, and dynamic heterogeneity present a challenge for theoretical modeling of polymer glass deformation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1957–1967     

Enhanced Temporal Stability of an NLO Polyurethane via a Two‐Dimensional Chromophore

A new NLO‐active polyurethane (T_g = 145°C) based on a two‐dimensional NLO chromophore has been investigated. Two ends of this lambda‐shaped chromophore can be directly bound to the main chain of polyurethane. After poling, fast relaxation of the effective second harmonic (SH) coefficient was observed at temperatures higher than 122°C. Moreover, excellent temporal stability at 100°C was obtained despite the operating temperature being very close to the fast relaxation temperature. This is due to the fact that embedding the rigid lambda‐shaped chromophores into the polymer backbone effectively restricts molecular motion at temperatures close to T_g.     

Stimuli‐responsive reversible physical networks. II. Design and properties of homogeneous physical networks consisting of periodic copolymers synthesized by living cationic polymerization

The design and precision synthesis of physical networks consisting of copolymers with crystallizable pendant groups are described in this work. Amphiphilic periodic, statistical, and gradient copolymers consisting of octadecyl vinyl ether (ODVE) units were synthesized via living cationic polymerization. The synthesis involved the copolymerization of ODVE and 2‐methoxyethyl vinyl ether (hydrophilic) with an 1‐(isobutoxy)ethyl acetate [CH₃CH(OiBu)OCOCH₃]/Et_1.5AlCl_1.5 initiating system in the presence of a weak Lewis base to yield copolymers with very narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ? 1.2). All aqueous solutions of the copolymers behaved as a viscous liquid above 50 °C. When cooled below 25 °C, the solutions turned into transparent, transient physical gels (exhibiting terminal flow), regardless of the sequence distribution. Viscoelastic studies showed that a periodic copolymer gave a hard gel that was more brittle than the gels obtained from the corresponding statistical and gradient copolymers. This difference and the differences in the relaxation time and relaxation mode distribution of the copolymer gels were consistent with the sequence distributions of ODVE in the respective copolymers. These results indicate that the mechanical properties of a physical network can be controlled by the primary polymer structures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2712‐2722, 2005     

A2B2 type miktoarm star copolymers via alkyne homocoupling reaction

The terminal alkyne homocoupling reaction (oxidative alkyne coupling) is presented here as a new route for the preparation of A₂B₂ type 4‐miktoarm star copolymer. The block copolymer with terminal alkyne at the junction point prepared by NMP‐ATRP and ROP‐NMP sequential routes is coupled via diyne formation to give (PS)₂‐(PMMA)₂ and (PCL)₂‐(PS)₂ 4‐miktoarm star polymers, respectively, by using a combination of (PPh₃)₂PdCl₂/PPh₃/CuI in a solvent mixture of Et₃N/CH₃CN at room temperature for 72 h. The molecular weight, intrinsic viscosity ([η]), radius of gyration (R_g), and hydrodynamic radius (R_h) of A₂B₂ 4‐miktoarm star copolymers were calculated using triple‐detection GPC as results of three detectors response. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6703–6711, 2008     

Copolyfluorenes containing phenothiazine or thiophene derivatives: Synthesis,characterization, and application in white‐light‐emitting diodes

Four copolyfluorenes chemically doped with 0.1 and 1 mol % 3,7‐bis[2‐thiophene‐2‐yl)‐2‐cyanovinyl]phenothiazine ( PFPhT ) or 2,5‐bis[2‐(thiophene‐2‐yl)‐2‐cyanovinyl]thiophene chromophores ( PFThT ) were synthesized using the Suzuki coupling reaction and applied in white‐light‐emitting devices. They were characterized by GPC, elemental analysis, DSC, TGA, optical spectra, and cyclic voltammetry. They exhibited good thermal stability (T_d > 420 °C) and moderate glass transition temperatures (>95 °C). The PhT‐Br and ThT‐Br showed PL peaks at 586 and 522 nm (with a shoulder at 550 nm). In film state, PL spectra of the copolymers comprised emissions from the fluorene segments and the chromophores due to incomplete energy transfer. Both monomers exhibited low LUMO levels around ?3.50 to ?3.59 eV, whereas the PhT‐Br owned the higher HOMO level (?5.16 eV) due to its electron‐donating phenothiazine core. Light‐emitting diodes with a structure of ITO/PEDOT:PSS/copolymer/Ca(50 nm)/Al(100 nm) showed broad emission depending on the chromophore contents. The maximum brightness and maximum current efficiency of PFPhT2 ( PFThT1 ) device were 8690 cd/m² and 1.43 cd/A (7060 cd/m² and 0.98 cd/A), respectively. White‐light emission was realized by further blending PFPhT2 with poly(9,9‐dihexylfluorene) (w/w = 10/1), with the maximum brightness and maximum current efficiency being 10,600 cd/m² and 1.85 cd/A. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 833–844, 2009     

Nonlinear optical side‐chain polymers post‐functionalized with high‐β chromophores exhibiting large electro‐optic property

Electro‐optic side‐chain polymers have been synthesized by the post‐functionalization of methacrylate isocyanate polymers with novel phenyl vinylene thiophene vinylene bridge (FTC) nonlinear optical chromophores. For this application, FTC‐based chromophores were modified in their electronic donor structure, exhibiting much larger molecular hyperpolarizabilities compared with the benchmark FTC. Of these new chromophores, absorption spectra, hyper‐Rayleigh scattering experiment, and thermal analysis were carried out to confirm availability as effective nonlinear optical units for electro‐optic side‐chain polymers. The electro‐optic coefficients (r₃₃) of obtained polymers were investigated in the process of in situ poling by monitoring the temperature, current flow, poling field, and electro‐optic signal. Compared with the nonsubstituted analogue, benxyloxy modified FTC chromophore significantly achieved higher nonlinear optical property, exhibiting molecular hyperpolarizability at 1.9 μm of 4600 × 10^?30 esu and an r₃₃ value of 150 pm/V at the wavelength of 1.31 μm. Synthesized electro‐optic polymers showed high glass transition temperature (T_g), so that the temporal stability examination exhibited >78% of the electro‐optic intensity remaining at 85 °C over 500 h. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis,characterization, and application of light‐emitting copolyfluorenes slightly doped with distyrylbenzene derivatives

Copolyfluorenes PFG1～PFG4 slightly doped with 0.006–0.5 mol % of 2,5‐dihexyloxy‐1,4‐bis(2‐phenyl‐2‐cyanovinyl)benzene (green chromophore) were synthesized by the Suzuki coupling reaction to be evaluated as hosts for white‐light electroluminescent (EL) devices. Their optical, thermal and electrochemical properties were almost identical to those of polyfluorene ( PF ) due to minimal chromophore content. However, the electroluminescent (EL) spectra of the PFGn were very different from photoluminescence spectra in film state. Relative intensity of green emission (ca. 521 nm) in EL spectra are much stronger than those in PL spectra, which can be attributed to charges trapping in the chromophores due to its narrow band gap (E_g ≈ 2.56 eV). The performance of EL devices [ITO/PEDOT:PSS/polymer/Ca (50 nm)/Al (100 nm)] were improved with an increase in chromophore content. The PFG4 device revealed the best performance (6790 cd/m², 1.69 cd/A), and the PFG1 and PFG2 devices exhibited comparable intensity in blue and green emissions. Blend EL devices were fabricated by using the PFGn as the hosts and a red iridium complex [Ir(piq)₂(acac)] as dopant. By controlling the amount of the iridium complex, the white‐light emitting device was achieved with PFG2 , with maximum brightness and CIE coordinate being 4120 cd/m² and (0.31, 0.28), respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 149–160, 2009     

Synthesis of polyallene‐based graft copolymer via 6‐methyl‐1,2‐heptadien‐4‐ol and styrene

A series of well‐defined graft copolymers with a polyallene‐based backbone and polystyrene side chains were synthesized by the combination of living coordination polymerization of 6‐methyl‐1,2‐heptadien‐4‐ol and atom transfer radical polymerization (ATRP) of styrene. Poly(alcohol) with polyallene repeating units were prepared via 6‐methyl‐1,2‐heptadien‐4‐ol by living coordination polymerization initiated by [(η³‐allyl)NiOCOCF₃]₂ firstly, followed by transforming the pendant hydroxyl groups into halogen‐containing ATRP initiation groups. Grafting‐from route was employed in the following step for the synthesis of the well‐defined graft copolymer: polystyrene was grafted to the backbone via ATRP of styrene. The cleaved polystyrene side chains show a narrow molecular weight distribution (M_w/M_n = 1.06). This kind of graft copolymer is the first example of graft copolymer via allene derivative and styrenic monomer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5509–5517, 2007     

Effects of electron irradiation on poly(vinylidene fluoride–trifluoroethylene) copolymers studied by solid‐state nuclear magnetic resonance spectroscopy

The effects of electron irradiation on the molecular chemical structure, conformation, mobility, and phase transition of vinylidene fluoride (VDF) and trifluoroethylene (TrFE) copolymer have been investigated with variable‐temperature, solid‐state ¹⁹F nuclear magnetic resonance (NMR). It has been found that electron irradiation converts all‐trans conformations of both VDF‐rich and TrFE‐containing segments into dynamically mixed trans–gauche conformations accompanied by a simultaneous ferroelectric‐to‐paraelectric (or amorphous) transition. The variable‐temperature ¹⁹F magic‐angle‐spinning spectra results show that the paraelectric phase melts at much lower temperatures in irradiated films than in an unirradiated sample. Moreover, ¹⁹F NMR relaxation data (spin–lattice relaxation times in both the laboratory and rotating frames) reveal that electron irradiation enhances the molecular motion in paraelectric regions, whereas the molecular motion in a high‐temperature amorphous melt (>100 °C) is more constrained in irradiated films. Besides these physical changes, electron irradiation also induces the formation of several CF₃ groups. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1714–1724, 2006