We propose a theory of thin film photovoltaics in which one of the polycrystalline films is made of a pyroelectric material grains such as CdS. That film is shown to generate strong polarization improving the device open circuit voltage. Implications and supporting facts for the major photovoltaic types based on CdTe and CuIn(Ga)Se2 absorber layers are discussed.
Bulk polycrystalline La0.8Li0.2MnO3 is found to switch between a low‐resistance state and a high‐resistance state on thermal cycling. The low‐temperature, high‐resistance state exhibits strong electroresistance whereas the high‐temperature, low‐resistance state does not. The change in resistance between the two distinct states is of two orders of magnitude. It is proposed that the observed metastability may serve as the basis for resistive thermal‐switching devices.
Nanostructures formed in a titanium dioxide (TiO2)–poly(styrene)‐block‐poly(ethyleneoxide) nanocomposite film on top of fluor‐doped tin oxide (FTO) layers are investigated. The combinatorial approach is based on probing a wedge‐shaped FTO‐gradient with grazing incidence small angle X‐ray scattering (GISAXS) in combination with a moderate micro‐focus X‐ray beam. The characteristic lateral length is given by adjacent nanowire‐shaped TiO2 regions. It decreases from 200 nm on the thick FTO layer to 90 nm on the bare glass surface.
An original approach is proposed to study the magnetic phase separation phenomenon. It is based on the registration of the noise‐like FMR Fine Structure (FMR FS) caused by the magnetic interparticle dipole–dipole interaction between spatially separated ferromagnetic regions. Data obtained for a La0.7Pb0.3MnO3 single crystal point to the existence of spatially separated ferromagnetic regions. It is shown that FMR FS of the La0.7Pb0.3MnO3 single crystal is temperature reversible and disappears at the maximum of magnetoresistance.
Monte‐Carlo simulations predict that a local correlated disorder is responsible for many of the novel transport and magnetic properties of colossal magnetoresistance (CMR) materials such as manganites. One important prediction of these models is that the resistivity at the metal–insulator transition (MIT) in manganites depends strongly on the correlated quenched disorder. However, experimental confirmation has been challenging since it is difficult to control the amount of disorder in these compounds. We carried out experiments on Sm0.55Sr0.45MnO3, a prototypical CMR manganite with a sharp MIT, whereby the oxygen‐related disorder is systematically enhanced by low temperature thermal activation. We observe dramatic changes in the temperature dependence of resistivity at the MIT as the amount of quenched disorder is increased, occurring in a manner that is in agreement with theoretical predictions.
We found that the chain of junctions acts both as the source of radiation and as a part of the superconducting resonator when the effective capacitance of the resonator is larger than the total capacitance of all junctions. At this condition junctions are synchronized in‐phase not only at the resonance steps but also in the whole hysteretic region of I –V characteristics below the resonant frequency. The maximal allowable spread of critical currents for this effect is about 5–10%. We analyzed the origin of the effect both numerically and by the method of slowly varying amplitudes.
In the present work, a review of the metallic (M) and semiconducting (S) separation of single‐wall carbon nanotubes (SWCNTs) using polysaccharide gels is presented. First, the progress of the M/S separation is described, including the following: the discovery of high‐yield separation using agarose gel electrophoresis, the separation of SWCNTs without an electric field, such as through the use of the freeze and squeeze method, the development of continuous separation using column chromatography, and the single‐chirality separation of SWCNTs using a multicolumn with dextran‐based gel. Next, the separation mechanism using gel is discussed, in which separation is achieved by selective adsorption of S‐SWCNTs by gel with a specific combination of surfactant and gel. Lastly, future directions for the separation of SWCNTs and for the use of the separated SWCNTs are discussed.
We demonstrate the monolithic integration of a microstructured organic photodiode with a planar optical stripe waveguide. The manufacturing of this waveguide‐integrated organic photodiode is based on an UV photolithography process. The integration of photodiodes with optical waveguides represents an essential building block in the field of optoelectronic‐photonic integrated circuits.
In this Letter we demonstrate that hydrogen‐terminated porous silicon (PSi) layers and powders can serve as highly efficient reductive templates for noble metal salts. The reduction results in metal nanoparticle (NP) formation in the pores of PSi. Gold NP formation has been monitored in‐situ by measuring the plasmon resonance response. Pt NPs, formed in the PSi matrix, were investigated by transmission electron microscopy and energy‐dispersive X‐ray analysis. Furthermore, hybrid Pt/PSi nanocomposites exhibit a high catalytic activity for CO oxidation.
The growth, structural and optical characterisation of dilute nitride alloys of InSb grown by plasma‐assisted molecular beam epitaxy is presented. The layers were characterised by high‐resolution X‐ray diffraction indicating high crystalline quality and nitrogen incorporations up to 0.68%. Fourier‐transform infrared absorption measurements reveal the position of the absorption edge to be a result of the competing effects of bandgap reduction (due to nitrogen incorporation and bandgap renormalisation) and Moss–Burstein band filling.
Optically transparent and high‐quality hybrid ZnO nanoparticle and anthracene embedded polyphenylsiloxane (PPS) glass films were spin‐coated on quartz substrates. A strong Förster resonant energy transfer (FRET) process was indicated by the observation of quenching of the ZnO emission and an enhancement of the anthracene emission at room temperature. The efficiency of this energy transfer between ZnO and the S1 vibronic states of the anthracene molecules can be optimized to exceed 90%.
Epitaxial TiC/SiC multilayers were grown by magnetron sputtering at a substrate temperature of 550 °C, where SiC is normally amorphous. The epitaxial TiC template induced growth of cubic SiC up to a thickness of ~2 nm. Thicker SiC layers result in a direct transition to growth of the metastable amorphous SiC followed by renucleation of nanocrystalline TiC layers.
We present a computational study based on time‐dependent density functional theory of the optical absorption spectra of TiO2 nanowires sensitized with organic dye molecules. We concentrate on catechol and squaraine dyes. For those molecules, we compute adsorption geometries and energies and investigate the optical properties of the combined dye– nanowire system. We find that although the molecules have qualitatively different optical spectra in the gas phase, both lead to an enhancement of the absorption in the visible frequency range when adsorbed on a nanowire.
We report the fabrication procedure and the characterization of an Al0.3Ga0.7As solar cell containing high‐density GaAs strain‐free quantum dots grown by droplet epitaxy. The production of photocurrent when two sub‐bandgap energy photons are absorbed simultaneously is demonstrated. The high quality of the quantum dot/barrier pair, allowed by the high quality of nanostructured strain‐free materials, opens new opportunities for quantum dot based solar cells.