Synthesis of 15‐, 16‐, and 17‐Membered Bis‐C‐Pivot Macrocycles Consisting of N2O2 Donor‐Type Crown Ethers and Dialkyl Phosphonates

Bis‐C‐pivot macrocycles containing aminophosphonate functions ( 5–10 ) have been synthesized and characterized by elemental analysis, FTIR, MS, 1D ¹H, ¹³C and ³¹P NMR, and 2D HETCOR techniques. The phosphorylation reaction of dibenzo‐bis‐imino crown ethers ( 1–4 ) with dimethyl and diethyl phosphite used here has the potential to provide bis‐C‐pivot macrocycles ( 5–10 ), which possess two stereogenic C‐centers giving rise to diastereoisomers (meso and racemic). Detailed spectral assignments for the meso and racemic forms of the compounds are reported on the basis of chemical shifts, signal intensities, spin–spin coupling constants, and splitting patterns. The bis‐C‐pivot macrocycles ( 5–10 ) may serve as a potential new class of supramolecular host molecules.     

Curing chemistry of phenylethynyl‐terminated imide oligomers: Synthesis of 13C‐labeled oligomers and solid‐state NMR studies

4‐(Phenylethynyl‐α,β‐¹³C)phthalic anhydride (PEPA) and ¹³C‐labeled phenylethynyl‐terminated imide (PETI) oligomers were synthesized, and solid‐state ¹³C nuclear magnetic resonance (NMR) spectroscopy was used to determine the structure of cured oligomers. Solid‐state ¹³C NMR spectra were collected before and after thermal curing. Using solid‐state ¹³C NMR difference spectroscopy, several cure products were identified. The observed ¹³C NMR resonances were assigned to four different classes of cure products: aromatics, products from backbone addition (substituted stilbenes and tetraphenylethanes), polyenes, and cyclobutadiene cyclodimers. The effects of postcuring and oligomer chain length on the structure of the cured resins were examined. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3486–3497, 2000     

A minimal amount of acrylonitrile turns the nitroxide‐mediated polymerization of methyl methacrylate into an almost ideal controlled/living system

Nitroxide‐mediated controlled/living free‐radical polymerization of methyl methacrylate initiated by the SG1‐based alkoxyamine BlocBuilder was successfully performed in bulk at 80–99 °C with the help of a very small amount of acrylonitrile (AN, 2.2–8.8 mol %) as a comonomer. Well‐defined PMMA‐rich P(MMA‐co‐AN) copolymers were prepared with the number‐average molar mass, M_n, in the 6.1–32 kg mol^?1 range and polydispersity indexes as low as 1.24. Incorporation of AN in the copolymers was demonstrated by ¹H and ¹³C NMR spectroscopy, and its effect on the chain thermal properties was evaluated by DSC and TGA analyses. Investigation of chain‐end functionalization by an alkoxyamine group was performed by means of ³¹P NMR spectroscopy and chain extensions from a P(MMA‐co‐AN)‐SG1 macroinitiator. It demonstrated the very high proportion of SG1‐terminated polymer chains, which opened the door to block copolymer synthesis with a high quality of control. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 34–47, 2010     

Curcumin,A Novel Natural Photoinitiator for the Copolymerization of Styrene and Methylmethacrylate

Curcumin (Cur), a natural colorant found in the roots of the Turmeric plant, has been reported for the first time as photoinitiator for the copolymerization of styrene (Sty) and methylmethacrylate (MMA). The kinetic data, inhibiting effect of benzoquinone and ESR studies indicate that the polymerization proceeds via a free radical mechanism. The system follows ideal kinetics (R_p α[Cur]^0.5[Sty]^0.97[MMA]¹). The reactivity ratios calculated by using the Finemann–Ross and Kelen‐Tudos models were r₁(MMA)=0.46 and r₂(Sty)=0.52. IR and NMR analysis confirmed the structure of the copolymer. NMR spectrum showing methoxy protons as three distinct groups of resonance between 2.2–3.75 δ and phenyl protons of styrene at 6.8–7.1 δ confirmed the random nature of the copolymer. The mechanism for formation of radicals and random copolymer of styrene and MMA [Sty‐co‐MMA] is also discussed.     

β‐Hydrogen transfer from poly(methyl methacrylate) propagating radicals to the nitroxide SG1: Analysis of the chain‐end and determination of the rate constant

Methyl methacrylate (MMA) was polymerized in bulk at 70 °C in the presence of an alkoxyamine initiator with low dissociation temperature (the so‐called BlocBuilder?) and increasing amounts of free N‐tert‐butyl‐N‐(1‐diethylphosphono‐2,2‐dimethylpropyl) nitroxide (SG1). Low final monomer conversions were reached, indicating a loss in radical activity due to side reactions such as irreversible homoterminations between the propagating radicals and β‐hydrogen transfer (also called disproportionation) from a propagating radical to a free‐SG1 nitroxide. Proton NMR and MALDI‐TOF mass spectrometry were used to analyze the polymer chain‐ends and to clearly identify the main mechanism of irreversible termination. In particular, it was shown that all polymer chains were terminated by an alkene function in the presence of a large excess of free SG1, meaning that β‐hydrogen transfer from PMMA propagating radicals to the nitroxide SG1 was the major chain‐stopping event. On the other hand, for a low excess of free SG1, the two termination modes coexisted. Kinetic modeling was then performed using the PREDICI software, and the rate constant of β‐hydrogen transfer, k_βHtr, was estimated to be 1.69 × 10³ L mol^?1 s^?1 at 70 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6333–6345, 2008     

N‐alkoxy pyridinium ion terminated polystyrenes: A facile route to photoinduced block copolymerization

Photoactive N‐alkoxy 4‐phenyl pyridinium and N‐alkoxy isoquinolinium ion terminated polystyrenes with hexafluoroantimonate counter anion were prepared and characterized. For this purpose, mono‐ and dibrominated polystyrenes were prepared by atom transfer radical polymerization (ATRP). The reaction of these polymers with silver hexafluoroantimonate in the presence of 4‐phenylpyridine N‐oxide and isoquinoline N‐oxide in dichloromethane produced desired polymeric salts with the corresponding functionalities. Irradiation of these photoactive polystyrenes produced alkoxy radicals at chain ends capable of initiating free radical polymerization of methyl methacrylate (MMA). This way, depending on the number of functionality, AB or ABA type block copolymers were formed which were characterized with the aid of gel permeation chromatography and ¹H NMR spectroscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 423–428, 2007.     

Grafting of poly(styrene‐co‐p‐chloromethyl styrene) with ethyl methacrylate via atom transfer radical polymerization catalyzed by CuCl/1,2‐dipiperidinoethane

Poly(styrene‐graft‐ethyl methacrylate) graft copolymer was prepared by atom transfer radical polymerization (ATRP) with poly(styrene‐co‐p‐chloromethyl styrene)s in various compositions as macroinitiator in the presence of CuCl/1,2‐dipiperidinoethane at 130 °C in N,N‐dimethylformamide. Both macroinitiators and graft copolymers were characterized by elemental analysis, IR, ¹H and ¹³C NMR, and differential scanning calorimetry. 1,2‐Dipiperidinoethane was an effective ligand of CuCl for ATRP in the graft copolymerization. The controlled growth of the side chain provided the graft copolymers with polydispersities of 1.60–2.05 in the case of poly(styrene‐co‐p‐chloromethyl styrene) (62:38) macroinitiator. Thermal stabilities of poly(styrene‐graft‐ethyl methacrylate) graft copolymers were investigated by thermogravimetric analysis as compared with those of the macroinitiators. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 668–673, 2003     

Reactivity ratios for the terpolymerization of methyl methacrylate,vinyl acetate,and molecular oxygen

The copolymerization of methyl methacrylate (MMA) and vinyl acetate (VAc) under high oxygen pressure was investigated. Copolyperoxides of various compositions were synthesized by the free‐radical‐initiated oxidative copolymerization of MMA and VAc monomers. The copolyperoxide compositions obtained from ¹H and ¹³C NMR spectra were used for determining the reactivity ratios of the monomers. The reactivity ratios indicated a larger proportion of MMA units statistically placed in the copolyperoxides. A theoretical analysis based on semiempirical AM1 calculations was performed to support the reactivity ratios. NMR studies showed irregularities in the copolyperoxide chain due to the cleavage reactions of the propagating peroxide radical. Thermal analyses of the copolyperoxides by differential scanning calorimetry gave evidence for the presence of alternating peroxide units in the copolyperoxide chain. The activation energies of thermal degradation suggested that degradation was controlled by the dissociation of the peroxide (? O? O? ) bond in the backbone of the copolyperoxide chain. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 564–572, 2002; DOI 10.1002/pola.10115     

Dendritic homopolymers and block copolymers: Tuning the morphology and properties

The synthesis and characterization of dendritic homopolymers and block copolymers of ?‐caprolactone and lactide (L ‐lactide and racemic lactide) were performed with multifunctional initiators in combination with living polymerization and the selective placement of branching junctures in a divergent growth strategy. A hexahydroxy‐functional 2,2‐bis(hydroxymethyl) propionic acid derivative was used as an initiator for the stannous‐2‐ethylhexanoate‐catalyzed living ring‐opening polymerization of ?‐caprolactone, L ‐lactide, and racemic L ,D ‐lactide. Branching junctions at the chain ends were introduced with benzylidene‐protected 2,2‐bis(hydroxymethyl) propionic acid. Subsequent generations were then polymerized, after deprotection, from these star‐shaped macroinitiators. Successive chain end capping and initiation produced three generations of polymers with molecular weights in excess of 130,000 g/mol and narrow polydispersities (<1.20). It was possible to prepare diblock and triblock copolymers with phase‐separated morphologies, and with L ‐lactide or D ,L ‐lactide, semicrystalline and amorphous morphologies were demonstrated. The polymers were characterized by ¹H NMR, ¹³C NMR, size exclusion chromatography, and differential scanning calorimetry. The compositions of the block copolymers and the conformational structures of the optically active polymers were also confirmed by optical rotation measurements. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1174–1188, 2004     

Functionalization of polymeric organolithium compounds with 3,4‐epoxy‐1‐butene: Precursors for diene‐functionalized macromonomers

The functionalization of polymeric organolithiums (PLi) with 3,4‐epoxy‐1‐butene (EPB) in a hydrocarbon solution yielded the corresponding hydroxybutene‐functionalized polymers in high yields (>95%). Three modes of addition of PLi to EPB were observed (1,4, 3,4, and 4,3). The products and chain‐end structures were characterized by ¹H NMR, ¹³C NMR, attached‐proton‐test ¹³C NMR, calculated ¹³C NMR chemical shifts, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). The regioselectivity of the addition depended on the PLi chain‐end structure, the reaction conditions, and the addition of lithium salts or Lewis bases. In the absence of additives, the functionalization of poly(styryl)lithium (PSli) produced equal amounts of 1,4‐, 3,4‐, and 4,3‐addition, as determined by quantitative ¹³C NMR analysis. The use of a low temperature (6 °C), inverse addition, the addition of triethylamine (TEA; [TEA]/[PSLi] = 20) as a Lewis base, or dienyllithium chain ends produced polymers with only the 1,4‐addition product. Mild dehydration of the hydroxybutene‐functionalized polymer with p‐toluenesulfonic acid produced the corresponding diene‐functionalized macromonomer, as shown by MALDI‐TOF MS. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 947–957, 2003     

Thermally induced fixed diradical generation on solid supports for surface‐initiated polymerization

A method is presented for generation of all surface‐bound radicals on solid polymer surfaces. Thus, secondary amide group of newly synthesized crosslinking comonomer, methacryloyloxyethyl methacrylamide was determined as versatile precursor for generation fixed diradicals on solid microspheres, obtained by copolymerization with methyl methacrylate (MMA) in aqueous suspension. Nitrosoation of the secondary amide groups on the microbeads and followed thermolysis above 90 °C was demonstrated to give surface‐bound radicals, capable of initiating polymerization of vinyl monomers, such as; styrene, MMA, N‐vinyl formamide, and N‐vinyl, 2‐pyrrolidone, as evidenced by H NMR, Fourier transform infrared, thermogravimetric analysis, and differential scanning calorimeter techniques. Appreciable grafting yields (55.1%–286.1%) and low free‐homopolymer formation (7.2%–19.7%) were noted within 6 h of the grafting at 100 °C in each case. This strategy involving the use of amide functional crosslinker seemed to be generally applicable to generate surface‐bound radicals for surface‐initiated polymerization from various solid substrates. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Chain transfer to polymer in emulsion copolymerizations

Chain transfer to polymer in emulsion copolymerizations of (i) vinyl acetate (VAc) with n‐butyl acrylate (BA) and (ii) BA/acrylic acid with (a) methyl methacrylate (MMA) and (b) styrene (S) has been studied using ¹³C NMR spectroscopy to quantify the level of branching in the copolymers produced. The results reveal synergistic effects in which the inclusion of a small amount of comonomer leads to disproportionate changes in the level of branching. The data from the VAc/BA copolymerizations show that radicals with VAc end units abstract hydrogen atoms from BA repeat units more frequently than from VAc repeat units and that radicals with VAc end units are more effective in abstracting hydrogen atoms from BA repeat units than are radicals with BA end units. These effects lead to higher levels of branching in VAc/BA copolymers than results from the corresponding homopolymerizations and are a consequence of the efficacy of hydrogen abstraction at BA backbone tertiary C‐H bonds by the highly‐reactive VAc‐ended chain radicals. In contrast, the effect of introducing MMA or S to an acrylate polymerization is to disproportionately reduce the level of branching, with S being more effective than MMA in moderating chain transfer to polymer. These effects arise because propagating radicals with MMA or S end‐groups have longer lifetimes compared to those with acrylate end groups and have a very much lower tendency to abstract hydrogen atoms from acrylate repeat units.     

The synthesis of poly[6,8‐dioxabicyclo[3.2.1]octane‐b‐(ethylene glycol)‐b‐6,8‐dioxabicyclo[3.2.1]octane] by controlled cationic ring‐opening polymerization

The triblock copolymer poly[6,8‐dioxabicyclo[3.2.1]octane‐b‐(ethylene glycol)‐b‐6,8‐dioxabicyclo[3.2.1]octane] was prepared by the controlled cationic ring‐opening polymerization of 6,8‐dioxabicyclo[3.2.1]octane (6,8‐DBO) from a macroinitiator. The macroinitiator, poly(ethylene glycol) (PEG) di(1‐chloroethyl ether), was prepared via the addition of HCl to PEG divinyl ether and was characterized with ¹³C NMR, ¹H NMR, and gel permeation chromatography (GPC). Upon preparation, a small fraction of the chain ends underwent a cyclization reaction to form inactive chain ends. When the macroinitiator was used in polymerizations of 6,8‐DBO with ZnI₂ as an activator, linear kinetic plots were observed, a linear increase in the copolymer molecular weight with conversion was seen, and the molecular weight distributions of the copolymer samples remained constant at about 1.40. Confirmation of the triblock structure of the final product was obtained with ¹H NMR spectra, ¹³C DEPT spectra, and GPC chromatograms. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4081–4087, 2000     

Reversible addition–fragmentation chain transfer polymerization of styrene under microwave irradiation

Reversible addition–fragmentation chain transfer (RAFT) polymerizations of styrene under microwave irradiation (MI), with or without azobisisobutyronitrile, were successfully carried out in bulk at 72 and 98 °C, respectively. The results showed that the polymerizations had living/controlled features, and there was a significant enhancement of the polymerization rates under MI in comparison with conventional heating (CH) under the same conditions. The polymer structures were characterized with ¹H and ¹³C NMR. The results showed the same structure for both polymers obtained by MI and CH. Successful chain‐extension experimentation further demonstrated the livingness of the RAFT polymerization carried out under MI. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6810‐6816, 2006     

Local order in polycarbonate glasses by 13C{19F} rotational‐echo double‐resonance NMR

Nearest‐neighbor chain packing in a homogeneous blend of carbonate ¹³C‐labeled bisphenol A polycarbonate and CF₃‐labeled bisphenol A polycarbonate has been characterized using a shifted‐pulse version of magic‐angle spinning ¹³C{¹⁹F} rotational‐echo double‐resonance (REDOR) NMR. Complementary NMR experiments have also been performed on a polycarbonate homopolymer containing the same ¹³C and ¹⁹F labels. In the blend, the ¹³C observed spin was at high concentration, and the ¹⁹F dephasing or probe spin was at low concentration. In this situation, an analysis in terms of a distribution of isolated heteronuclear pairs of spins is valid. A comparison of the results for the blend and homopolymer defines the NMR conditions under which higher concentrations of probe labels can be used and a simple analysis of the REDOR results is still valid. The nearest neighbors of a CF₃ on one chain generally include a carbonate group on an adjacent chain. A direct interpretation of the REDOR total dephasing for the polycarbonate blend indicates that at least 75% of carbonate‐carbon ¹³C ··· F₃ nearest neighbors are separated by a narrow distribution of distances 4.7 ± 0.3 Å. In addition, analysis of the variations in REDOR spinning‐sideband dephasing shows that most of the ¹³C ··· F₃ dipolar vectors have a preferred orientation relative to the polycarbonate mainchain axis. This combination of distance and orientational constraints is interpreted in terms of local order in the packing of the carbonate group of one polycarbonate chain relative to the isopropylidene moiety in a neighboring chain. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2760–2775, 2006     

Preparation of a copolymer of methyl methacrylate with a new monomer, 2,2,6,6‐tetramethyl‐4‐benzyloxyl‐piperidinyl methacrylate,and its initiation of the graft copolymerization of styrene with a controlled radical mechanism

A copolymer [P(MMA‐co‐TBPM)] was prepared by the radical polymerization of methyl methacrylate (MMA) and 2,2,6,6‐tetramethyl‐4‐benzyloxyl‐piperidinyl methacrylate (TBPM) with azobisisobutyronitrile as an initiator. TBPM was a new monomer containing an activated ester. Both the copolymer and TBPM were characterized with NMR, IR, and gel permeation chromatography in detail. It was confirmed that P(MMA‐co‐TBPM) could initiate the graft polymerization of styrene by the cleavage of the activated ester of the TBPM segment. This process was controllable, and the molecular weight of the graft chain of polystyrene increased with the increment of conversion. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4398–4403, 2002     

13C NMR and electron spin resonance analyses of the radical polymerization of diisopropyl itaconate

Radical polymerizations of dialkyl itaconates were performed in benzene at 50 °C. The ¹³C NMR spectra of the obtained polymers indicated that intramolecular chain‐transfer reaction had taken place more frequently in the polymerizations of itaconates with bulkier ester groups as follows: isopropyl (i‐Pr) > n‐butyl (n‐Bu) ≈ ethyl (Et) > methyl (Me). In addition to the ¹³C NMR analysis, an electron spin resonance (ESR) analysis was conducted for polymerizations of diisopropyl itaconate, the ESR spectra of which consisted of two kinds of resonances due to the radicals with different conformations. It was assumed that the difference in conformation was attributable to the stereosequences near the propagating chain end because the relative intensity ratios of the resonances varied with the magnitude of the intramolecular chain‐transfer reaction, which was accompanied by a decrease in the syndiotacticity of the obtained poly(diisopropyl itaconate)s. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4513–4522, 2002     

Design,synthesis, and characterization of a combined main‐chain/side‐chain liquid crystalline polymer based on mesogen‐jacketed liquid crystal polymer via atom transfer radical polymerization

A novel combined main‐chain/side‐chain liquid crystalline polymer based on mesogen‐jacketed liquid crystal polymers (MJLCPs) containing two biphenyls per mesogenic core of MJLCPs main chain, poly(2,5‐bis{[6‐(4‐butoxy‐4′‐oxy‐biphenyl)hexyl]oxycarbonyl}styrene) (P1–P8) was successfully synthesized via atom transfer radical polymerization (ATRP). The chemical structure of the monomer was confirmed by elemental analysis, ¹H NMR, and ¹³C NMR. The molecular characterizations of the polymer with different molecular weights (P1–P8) were performed with ¹H NMR, gel permeation chromatography (GPC), and thermogravimetric analysis (TGA). Their phase transitions and liquid‐crystalline behaviors of the polymers were investigated by differential scanning calorimetry (DSC) and polarized optical microscope (POM). We found that the polymers P1–P8 exhibited similar behavior with three different liquid crystalline phases upon heating to or cooling in addition to isotropic state, which should be related to the complex liquid crystal property of the side‐chain and the main‐chain. Moreover, the transition temperatures of liquid crystalline phases of P1–P8 are found to be dependent on the molecular weight. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7310–7320, 2008     

Synthesis and characterization of copolyperoxides of indene with styrene, α‐methylstyrene,and α‐phenylstyrene

The oxidative copolymerization of indene with styrene, α‐methylstyrene, and α‐phenylstyrene is investigated. Copolyperoxides of different compositions have been synthesized by the free‐radical‐initiated oxidative copolymerization of indene with vinyl monomers. The compositions of the copolyperoxides obtained from the ¹H and ¹³C NMR spectra have been used to determine the reactivity ratios of the monomers. The reactivity ratios indicate that indene forms an ideal copolyperoxide with styrene and α‐methylstyrene and alternating copolyperoxides with α‐phenylstyrene. Thermal degradation studies via differential scanning calorimetry and electron‐impact mass spectroscopy support the alternating peroxide units in the copolyperoxide chain. The activation energy for thermal degradation suggests that the degradation is dependent on the dissociation of the peroxide (? O? O? ) bonds in the backbone of the copolyperoxide chain. Their flexibility has been examined in terms of the glass‐transition temperature. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2004–2017, 2002     

The microstructure determination of ethylene‐styrene‐propylene terpolymers at triad level by high‐temperature two‐dimensional NMR spectra

To further extend temperature range of application and low temperature performance of the ethylene‐styrene copolymers, a series of poly(ethylene‐styrene‐propylene) samples with varying monomer compositions and relatively low glass‐transition temperatures (T_g = −28 – 22 °C) were synthesized by Me₂Si(Me₄Cp)(N‐t‐Bu)TiCl2/MMAO system. Since the ¹³C NMR spectra of the terpolymers were complex and some new resonances were present, 2D‐¹H/¹³C heteronuclear single quantum coherence and heteronuclear multiple bond correlation experiments were conducted. A complete ¹³C NMR characterization of these terpolymers was performed qualitatively and quantitatively, including chemical shifts, triad sequence distributions, and monomer average sequence lengths. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 340–350