Diels‐Alder Reaction in microemulsions with ionic liquid

The Diels‐Alder Reaction (DAR) between N‐ethylmaleimide and 2,3‐dimethyl‐1,3‐butadiene was studied in microemulsions with ionic liquid (IL) for the first time. The apparent second‐order rate constants were determined by spectrophotometry in the microemulsion. The effect of solvent on the DAR rate was investigated and interpreted. The experimental results showed that the reaction rate in the microemulsion with IL was enhanced and it was faster than that in pure isooctane and in generic AOT microemulsion. The effect of the IL on the apparent second rate constant (k₂) was explained. The effect of temperature on the reaction rate was studied, and values of apparent activation energy were estimated in various microemulsion with IL. Copyright © 2012 John Wiley & Sons, Ltd.     

High‐pressure effects on the Diels–Alder reaction in room temperature ionic liquids

The effect of pressure on the Diels–Alder reaction was examined in room temperature ionic liquids, followed by high‐pressure FT‐IR spectroscopy using pressures up to 150 MPa. Pressure enhances the kinetic sensitivity of the reaction. The kinetic effect of fluorophobic interactions was examined using ionic liquids with fluorous cations. Ionic liquids in combination with ZnI₂ as a Lewis acid catalyst were also studied under high pressure. Copyright © 2007 John Wiley & Sons, Ltd.     

Effect of Lewis acids on the Diels–Alder reaction in ionic liquids with different activation modes

The Diels–Alder reaction has been examined in room temperature ionic liquids with high molar concentrations of Lewis acids under various conditions. A molar ratio of 10% catalyst gave a large increase in the selectivity and the yield of the reaction. The effect of catalysts on reaction rates was also examined under 100 MPa of pressure which leads to modest improvements in reaction rates. Ultrasound and microwave dielectric heating were also shown to improve the rate and, to a minor extent, selectivity of the examined reactions. Copyright © 2008 John Wiley & Sons, Ltd.     

Aza‐Diels–Alder reaction between cyclopentadiene and protonated N‐phenylethyliminoacetates of 8‐phenylmenthol and 8‐phenylneomenthol: a density functional theory study

The cycloaddition between glyoxylate imines possessing two chiral auxiliaries, N‐(R)‐ or N‐(S)‐1‐phenylethyl and 8‐phenylmenthyl or 8‐phenylneomenthyl, and cyclopentadiene is described. Computational calculations using density functional theory with the Becke, three‐parameter, Lee–Yang–Parr functional and the 6‐31G(d) basis set were performed to better understand the highly diastereoselective mechanism and the exo‐selectivity observed experimentally for these ionic aza‐Diels–Alder reactions. Copyright © 2011 John Wiley & Sons, Ltd.     

Dimethyl sulfoxide/deep eutectic solvents mixtures as media in the reaction of 1‐fluoro‐2,4‐dinitrobenzene with piperidine: A solvent effect study

Aromatic nucleophilic substitution reaction of 1‐fluoro‐2,4‐dinitrobenzene with piperidine was kinetically investigated in ethylene glycol‐choline chloride and glycerol‐choline chloride as 2 deep eutectic solvents (DESs) mixed with dimethyl sulfoxide, in whole mole fractions, at room temperature. The investigation of the reaction in different concentrations of the piperidine shows that the reaction follows the base‐catalyzed mechanism. The measured rate coefficients of the reaction demonstrated a sharp decreasing in all mixtures with the increasing mole fraction of DESs. Linear free energy relationship investigations confirm that hydrogen bond donor ability in addition to polarity‐polarizability of the media has a major effect on the reaction rate. The decrease in the rate coefficient is attributed to not only hydrogen‐bonding donor interactions of the media with piperidine as both reactant and catalyst but also the preferential solvation of reactants by DES compared with the intermediate of the reaction.     

A classical molecular dynamics study of a Diels Alder cycloaddition in supercritical water

Molecular dynamics simulations were performed to investigate the Diels Alder cycloaddition of cyclopentadiene and methyl vinyl ketone in high pressure, high temperature water. It was found that the reaction was favoured by high temperatures at 1000?atm due to increasing entropy. Similarly, at 400?atm, the entropy caused both the equilibrium and rate constant to increase to a peak at 698?K before rapidly falling once more with increasing temperature. At a constant temperature of either 598?K or 898?K, increasing pressure resulted in a lowering of the equilibrium constant. This effect was significantly more pronounced for 898?K, caused by less favourable solvation of the products and an increasing amount of work required for reaction.     

Regioselectivity and stereoselectivity of Diels–Alder reaction: a DFT study on the functionalization of organic semiconductor crystals

Diels–Alder (DA) reaction is one of the most commonly tools in functionalizing organic semiconductor crystals. The DA reactions of two organic semiconductors, i.e. tetracene ( 1 ) and rubrene ( 2 ), to several dienophiles ( 3 to 7 ) were performed experimentally recently. But the kinetics and mechanism of stereoselectivity and regioselectivity remain unknown. In the current study, all related 20 DA reactions (totally 32 possible pathways) were investigated by density functional theory. It was found that the reaction of 7 and a–b position of 1 is the most favorable one. The c–d position of 2 is more reactive than its a–b position when 2 combines with 3 , but is less reactive when combines with 4 to 7 . The endo and exo pathways have similar activation barriers in each reaction. The rate coefficients were calculated using the canonical variational transition state theory and their Arrhenius expressions were fitted. The theoretical conclusion agrees with the experimental observations and is of general importance for similar reactions. Solvent has a slight effect on these reactions. Copyright © 2016 John Wiley & Sons, Ltd.     

The water‐promoted Diels–Alder reaction in quaternary ammonium salts

Prevailing classification of salts based on their effect in solubility and stability of proteins in aqueous solution predicts that tetraalkylammonium salts, guanidinium chloride (GnCl), LiClO₄ act as salting‐in (S/I) and LiCl, NaCl act as salting‐out (S/O) in aqueous conditions. In the same context the behaviour of GnCl, LiClO₄ and LiCl are contradictory in polar solvents like ethylene glycol and formamide. In these solvents, expected salt effect shows just opposite nature from their usual expectation. However, in the aqueous solution salts like tetraalkylammonium halide (R₄NX, R = alkyl group, X = Br group) behave like salting‐in salts. The physicochemical origin of the salting in effect of R₄NX type of salts has been discussed elaborately in the present work. The role of cations in terms of substitution of various alkyl groups on R₄NX has been systematically presented here on the basis of experimental kinetic and thermodynamic studies. The abnormal behaviour of R₄NX salts in aqueous solution has also been explained by the Setschenov equation (k_s) and Δμ_solvation values, which highlights their individual nature out of common properties of R₄NX. Copyright © 2015 John Wiley & Sons, Ltd.     

A thorough understanding of the Diels–Alder reaction of 1,3‐butadiene and ethylene

The Diels–Alder (DA) reaction is one of the most important reactions in organic chemistry. The controversy surrounding this reaction as to whether it follows a concerted or stepwise mechanism has existed for a long time. The reaction of 1,3‐butadiene and ethylene is the paradigmatic example of the DA reaction. We have reinvestigated the mechanism of this reaction using density functional theory. The theoretical study considered all types of possible pathways for the reaction of 1,3‐butadiene and ethylene using six functionals at different rungs of Jacob's ladder. Therefore, a complete picture is given for a thorough understanding of the iconic DA reaction, and a new stationary point during the reaction processes has been reported for the first time. The calculated results indicated that three functionals, ωB97X‐D, M06‐2X, and B2‐PLYP, of the fourth and fifth rungs of Jacob's ladder performed well in the investigation of the mechanism of this reaction and that the reliable basis set should be larger than 6‐311+G(2d,p). The cis‐1,3‐butadiene more easily reacted with ethylene compared with 1,3‐butadiene in the trans conformation. The concerted mechanism was found to be energetically favorable, whose energy barrier is around 10 kcal/mol lower than that of the stepwise mechanism. Two investigated solvents, toluene and CH₃CN, had little impact on this simple DA reaction. Copyright © 2014 John Wiley & Sons, Ltd.     

A DFT study on Diels–Alder cycloadditions of trans‐1,3‐butadiene to C60 and C70

Investigation of the relative reactivity of bonds in fullerenes will provide fundamental theory for the design of fullerene‐based materials. We have theoretically investigated the reactivity of the Diels–Alder (DA) cycloaddition of cis‐1,3‐butadiene to all types of bonds in C₆₀ and C₇₀ using the M06‐2X hybrid density functional theory (DFT) calculations (J. Phys. Org. Chem. 2012, 25 850–855) and have pointed out that the DA cycloadditions of cis and trans forms of 1,3‐butadiene to ethylene have a specially intimate relationship (J. Phys. Org. Chem. 2014, 27 652–660). For the aim of telling a whole story of the DA cycloaddition concerning C₆₀ and C₇₀, the DA cycloadditions of trans‐1,3‐butadiene to all types of bonds in C₆₀ and C₇₀ were explored at the same theoretical level as those of the cis‐1,3‐butadiene. The calculated results related with the trans‐ and cis‐1,3‐butadienes were compared. The potential energy curves of DA cycloadditions of trans‐ and cis‐1,3‐butadiene to C₆₀ and C₇₀ were discussed. The distortion–interaction energy model was employed to elucidate the origin of different reactivity of all kinds of C?C bonds. The solvent effects were examined using the continuum solvent model. These current results, along with our previous research, will help to obtain an overall view of the DA cycloadditions of 1,3‐butadiene to C₆₀ and C₇₀. Copyright © 2014 John Wiley & Sons, Ltd.     

An experimental and theoretical study on the preparation of 4,4′‐methylene‐bis(N,N‐dimethylaniline) in ionic liquid

The reaction of N,N‐dimethylaniline with tetrachloromethane in ionic liquid was found to give 4,4′‐methylene‐bis (N,N‐dimethylaniline) in considerable yield. The ionic liquid was prepared from N,N‐dimethylaniline which is also the one of raw materials for the preparation of 4,4′‐methylene‐bis (N,N‐dimethylaniline), and acts as both solvent and catalyst in the reaction. Mild reaction conditions, enhanced rates, improved yields, and reagents' reactivity which is different from that in conventional organic solvents are the remarkable features observed in ionic liquids. In addition, the results of calculations are in good accordance with the experimental outcomes. Copyright © 2016 John Wiley & Sons, Ltd.     

Surfactant‐assisted specific‐acid catalysis of Diels–Alder reactions in aqueous media

Surfactant‐assisted specific‐acid catalysis (SASAC) for Diels–Alder reactions of dienophiles 1 and 4 with cyclopentadiene 2 in aqueous media at 32 °C was studied. This study showed that acidified anionic surfactants (pH 2) such as sodium dodecyl sulfate (SDS) and linear alkylbenzene sulfonic acid (LAS) accelerate Diels—Alder reactions. Conversely, under similar reaction conditions (pH 2) these reactions are inhibited by (acidified) cationic surfactants such as dodecyltrimethylammonium bromide (DTAB), dodecyldimethylammonium bromide (DDAB), and dodecylmethylammonium bromide (DMAB). A modest rate acceleration resulting from the surfactant hydrogen‐bonding capacity is also recorded for the Diels–Alder reaction of naphthoquinones ( 6 ) with cyclopentadiene ( 2 ) in aqueous media at 32 °C. Copyright © 2007 John Wiley & Sons, Ltd.     

Raman and ab initio study of the conformational isomerism in the 1‐ethyl‐3‐methyl‐imidazolium bis(trifluoromethanesulfonyl)imide ionic liquid

The calculated and experimental Raman spectra of the (EMI⁺)TFSI⁻ ionic liquid, where EMI⁺ is the 1‐ethyl‐3‐methylimidazolium cation and TFSI⁻ the bis(trifluoromethanesulfonyl)imide anion, have been investigated for a better understanding of the EMI⁺ and TFSI⁻ conformational isomerism as a function of temperature. Characteristic Raman lines of the planar (p) and non‐planar (np) EMI⁺ conformers are identified using the reference (EMI⁺)Br⁻ salt. The anion conformer of C₂ symmetry is confirmed to be more stable than the cis (C₁) one by 4.5 ± 0.2 kJ mol⁻¹. At room temperature, the population of trans (C₂) anions and np cations is 75 ± 2% and 87 ± 4%, respectively. Fast cooling quenches a metastable glassy phase composed of mainly C₂ anion conformers and p cation conformers, whereas slow cooling gives a crystalline phase composed of C₁ anion conformers and of np cation conformers. Copyright © 2006 John Wiley & Sons, Ltd.     

Intermolecular interactions,ion solvation,and association in mixtures of 1‐n‐butyl‐3‐methylimidazolium hexafluorophosphate and γ‐butyrolactone: insights from Raman spectroscopy

By means of Raman spectroscopy coupled with density functional theory (DFT) calculations and perturbation correlation moving window two‐dimensional correlation spectroscopy intermolecular interactions were assessed in mixtures of ionic liquid (IL) 1‐n‐butyl‐3‐methylimidazolium hexafluorophosphate (BmimPF₆) with polar aprotic solvent γ‐butyrolactone (γ‐BL) over the entire range of compositions. The symmetrical P―F stretching vibration of the IL anion was found to be insensitive to the changes in mixture concentration in contrast to the CO stretching vibration of the γ‐BL and the imidazolium ring C―H stretching vibrations of the IL cation. Each of these vibrational profiles was decomposed in various spectral contributions, and their number was rationalized by the results of quantum‐chemical calculations and/or previous controversial published data. Progressive redshift of the ring C―H stretching wavenumbers was referred to pronounced solvation of the cation at the imidazolium ring site accompanied with H‐bond formation. This was especially pronounced at IL mole fraction less than 0.18. Complicated variations in the intensities of the individual contributions of the CO profile were treated as a manifestation of the changing with concentration pattern of the intermolecular interactions. The self‐association of γ‐BL molecules and distinct cation solvation as dominant intermolecular interactions at low IL content are replaced with weaker cation solvation and ion association at high concentrations of IL. Possible representative molecular structures were proposed on the basis of DFT calculations. Copyright © 2015 John Wiley & Sons, Ltd.     

Homo‐Diels–Alder reaction of a very inactive diene,bicyclo[2,2,1]hepta‐2,5‐diene,with the most active dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione. Solvent,temperature, and high pressure influence on the reaction rate

Solvent, temperature, and high pressure influence on the rate constant of homo‐Diels–Alder cycloaddition reactions of the very active hetero‐dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione (1), with the very inactive unconjugated diene, bicyclo[2,2,1]hepta‐2,5‐diene (2), and of 1 with some substituted anthracenes have been studied. The rate constants change amounts to about seven orders of magnitude: from 3.95^.10^?3 for reaction (1+2) to 12200 L mol^?1 s^?1 for reaction of 1 with 9,10‐dimethylanthracene (4e) in toluene solution at 298 K. A comparison of the reactivity (ln k₂) and the heat of reactions (?_r‐nH) of maleic anhydride, tetracyanoethylene and of 1 with several dienes has been performed. The heat of reaction (1+2) is ?218 ± 2 kJ mol^?1, of 1 with 9,10‐dimethylanthracene ?117.8 ± 0.7 kJ mol^?1, and of 1 with 9,10‐dimethoxyanthracene ?91.6 ±0.2 kJ mol^?1. From these data, it follows that the exothermicity of reaction (1+2) is higher than that with 1,3‐butadiene. However, the heat of reaction of 9,10‐dimethylanthracene with 1 (?117.8 kJ mol^?1) is nearly the same as that found for the reaction with the structural C=C counterpart, N‐phenylmaleimide (?117.0 kJ mol^?1). Since the energy of the N=N bond is considerably lower (418 kJ/bond) than that of the C=C bond (611 kJ/bond), it was proposed that this difference in the bond energy can generate a lower barrier of activation in the Diels–Alder cycloaddition reaction with 1. Linear correlation (R = 0.94) of the solvent effect on the rate constants of reaction (1+2) and on the heat of solution of 1 has been observed. The ratio of the volume of activation (?V^≠) and the volume of reaction (?V_r‐n) of the homo‐Diels–Alder reaction (1+2) is considered as “normal”: ?V^≠/?V_r‐n = ?25.1/?30.95 = 0.81. Copyright © 2012 John Wiley & Sons, Ltd.     

Lithium solvation in a PMMA membrane plasticized by a lithium‐conducting ionic liquid based on 1‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide

The Raman and Infrared (IR) spectra of poly(methyl methacrylate) (PMMA) membranes plasticized by ionic liquids of the (1 − x)[1‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (BMITFSI)],xLiTFSI type, where BMI⁺ is the 1‐butyl‐3‐methylimidazolium cation and TFSI⁻ the bis(trifluoromethanesulfonyl)imide anion, are analyzed for a lithium bis(trifluoromethane sulfone)imide (LiTFSI) mole fraction x = 0.23 and PMMA contents from 0 to 50 wt%. The lithium is found to have an average coordination of about three CO groups and less than one TFSI⁻ anion. It plays the role of a cross‐linker between the ester groups of PMMA and the nonvolatile ionic liquid. Addition of PMMA to the (1 − x)(BMITFSI),xLiTFSI ionic liquid lowers the conductivity but might improve the lithium transference number by transforming the [Li(TFSI)₂]⁻ anionic clusters present in the pure ionic liquid into a mixed coordination by ester groups and TFSI⁻ anions. Copyright © 2008 John Wiley & Sons, Ltd.     

Lithium solvation and diffusion in the 1‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide ionic liquid

The Raman spectra of (1 − x)(BMITFSI), xLiTFSI ionic liquids, where 1‐butyl‐3‐methylimidazolium cation (BMI⁺) and bis(trifluoromethane‐sulfonyl)imide anion (TFSI⁻) are analyzed for LiTFSI mole fractions x < 0.4. As expected from previous studies on similar TFSI‐based systems, most lithium ions are shown to be coordinated within [Li(TFSI)₂]⁻ anionic clusters. The variation of the self‐diffusion coefficients of the ¹H, ¹⁹F, and ⁷Li nuclei, measured by pulsed‐gradient spin‐echo NMR (PGSE‐NMR) as a function of x, can be rationalized in terms of the weighted contribution of BMI⁺ cations, TFSI⁻ ‘free’ anions, and [Li(TFSI)₂]⁻ anionic clusters. This implies a negative transference number for lithium. Copyright © 2008 John Wiley & Sons, Ltd.     

Intramolecular Diels–Alder reaction in enyne–allenes: a computational investigation and comparison with the Myers–Saito and Schmittel reactions

The reaction mechanisms as well as substituted effect and solvent effect of the enyne–allenes are investigated by Density Functional Theory (DFT) method and compared with the Myers–Saito and Schmittel reactions. The Myers–Saito reaction of non‐substituted enyne–allenes is kinetically and thermodynamically favored as compared to the Schmittel reaction; while the concerted [4 + 2] cycloaddition is only 1.32 kcal/mol higher than the C₂? C₇ cyclization and more exothermic (Δ_RE = ?69.38 kcal/mol). For R₁ = CH₃ and t‐Bu, the increasing barrier of the C₂? C₇ cyclization is higher than that for the C₂? C₆ cyclization because of the steric effect, so the increased barrier of the [4 + 2] cycloaddition is affected by such substituted electron‐releasing group. Moreover, the strong steric effect of R₁ = t‐Bu would shift the C₂? C₇ cyclization to the [4 + 2] cycloaddition. On the other hand, for R₁ = Ph, NH₂, O^?, NO₂, and CN substituents, the barrier of the C₂? C₆ cyclization would be more diminished than the C₂? C₇ cyclization due to strong mesomeric effect; the reaction path of C₂? C₇ cyclization would also shift to the [4 + 2] cycloaddition. The solvation does not lead to significant changes in the potential‐energy surface of the reaction except for the more polar surrounding solvent such as dimethyl sulfoxide (DMSO), or water. Copyright © 2009 John Wiley & Sons, Ltd.     

Understanding the stereo‐ and regioselectivities of the polar Diels–Alder reactions between 2‐acetyl‐1,4‐benzoquinone and methyl substituted 1,3‐butadienes: a DFT study

The polar Diels–Alder (DA) reactions of 2‐acetyl‐1,4‐benzoquinone (acBQ) with methyl substituted 1,3‐butadienes have been studied using DFT methods at the B3LYP/6‐31G(d) level of theory. These reactions are characterized by a nucleophilic attack of the unsubstituted ends of the 1,3‐dienes to the β conjugated position of the acBQ followed by ring‐closure. The reactions present a total regioselectivity and large endo selectivity. The analysis based on the global electrophilicity of the reagents at the ground state, and the natural bond orbital (NBO) population analysis at the transition states correctly explain the polar nature of these cycloadditions. The large electrophilic character of acBQ is responsible for the acceleration observed in these polar DA reactions. Copyright © 2008 John Wiley & Sons, Ltd.     

Solvent effects on chemical processes: new solvents designed on the basis of the molecular–microscopic properties of (molecular solvent + 1,3‐dialkylimidazolium) binary mixtures

The purpose of this work was to analyze the microscopic feature of binary solvent systems formed by a molecular solvent (acetonitrile or dimethylformamide or methanol) and an ionic liquid (IL) cosolvent [1‐(1‐butyl)‐3‐methylimidazolium tetrafluoroborate or 1‐(1‐butyl)‐3‐methylimidazolium hexafluorophosphate]. The empirical solvatochromic solvent parameters E_T(30), π*, α, and β were determined from the solvatochromic shifts of adequate indicators. The behavior of the solvent systems was analyzed according to their deviation from ideality. The study focused on the identification of solvent mixtures with relevant solvating properties in order to select mixed solvents with particular characteristics. The comparison of the molecular–microscopic solvent parameters corresponding to the selected binary mixtures with both ILs considered at similar mixed‐solvent composition revealed that the difference is centered on the basic character of them. A kinetic study of a nucleophilic aromatic substitution reaction between 1‐fluoro‐2,4‐dinitrobenzene (FDNB) and 1‐butylamine (BU) developed in (acetonitrile or dimethylformamide + IL) solvent mixtures is presented in order to investigate and compare the solvent effects on a chemical process. For the explored reactive systems the solvation behavior is dominated by both the dipolarity/polarizability and the basicity of the media, contributing these solvent properties to accelerating the chemical process. Copyright © 2007 John Wiley & Sons, Ltd.