Carboxylic acid‐containing benzoxazines as efficient catalysts in the thermal polymerization of benzoxazines

The autocatalytic thermal polymerization behavior of three benzoxazine monomers containing carboxylic acid functionalities is reported. Several mixtures of these carboxylic monomers and 3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazine were prepared and their thermal polymerization behavior was analyzed by differential scanning calorimetry. The acid character of these reactive monomers increases the concentration of oxonium species, thus catalyzing the benzoxazine ring opening reaction. In this way the polymerization temperature decreased by as much as 100 °C in some cases. The existence of decarboxylation processes at high temperatures has been established by FTIR‐ATR and related to the increase in thermal stability observed by TGA in some cases. A relationship between the presence of carboxylic groups in the resulting materials and their flame retardancy behavior has also been established. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6091–6101, 2008     

Novel organic–inorganic hybrid materials from renewable resources: Hydrosilylation of fatty acid derivatives

Novel hybrid organic–inorganic materials were prepared from 10‐undecenoyl triglyceride and methyl 3,4,5‐tris(10‐undecenoyloxy)benzoate via hydrosilylation. 1,4‐Bis(dimethylsilyl)benzene, tetrakis(dimethylsilyloxy)silane, and 2,4,6,8‐tetramethylcyclotetrasiloxane were used as crosslinkers. The hydrosilylation reaction was catalyzed by Karstedt's catalyst [Pt(0)–divinyltetramethyldisiloxane complex]. The networks were structurally characterized by Fourier transform infrared spectroscopy, ¹³C NMR, and ²⁹Si magic‐angle‐spinning NMR. The thermal properties of these hybrids were studied with differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis. The obtained materials showed good transparency and promising properties for optical applications. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6295–6307, 2005     

Synthesis and characterization of fluid 1,3‐benzoxazine monomers and their thermally activated curing

Novel mono‐ and difunctional aliphatic oxyalcohol‐based benzoxazines have been synthesized and characterized in detail. Molecular structures of the monomers were investigated by spectral analysis. The obtained benzoxazine monomers exhibit fluidic behavior, which makes them particularly useful for many applications compared to other traditional benzoxazines. Differential scanning calorimetry was used to monitor the thermal crosslinking behavior of synthesized monomers. Mono‐ and bifunctional benzoxazine monomers exhibited low curing exhothermic peak with the onset around 173 and 180 °C, respectively. Relatively, low ring‐opening polymerization temperature was due to the hydroxyl groups present in the structure of the monomers. The hydrogen bonding of hydroxyl groups may cause alignment of the monomers in the liquid state. Thermal stabilty of the polybenzoxazines was studied by thermogravimetric analysis. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Synthesis of optically active polymers containing chiral phosphorus atoms in the main chain

We successfully synthesized optically active polymers by using a chiral bisphosphine, (S,S)‐1,2‐bis[boranato(t‐butyl)methylphosphino]ethane, as a key building block. Their structures were characterized with ¹H, ¹³C, and ³¹P NMR spectra. The obtained polymers exhibited different glass‐transition temperatures depending on the structure of each comonomer, whereas a model compound had a melting point. According to circular dichroism spectra, the difference in the stereochemistry of the comonomers yielded the different higher‐ordered structures of the polymers induced by chiral phosphine units. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 866–872, 2007     

Synthesis of sulfur‐containing hyperbranched polymers by the bisthiolation polymerization of diethynyl disulfide derivatives

The reaction of phenyl propynyl ether and diphenyl disulfide in the presence of 1 mol % tetrakis(triphenylphosphine)palladium as a model reaction of the polymerization of bis(4‐prop‐2‐ynyloxyphenyl) disulfide ( 1a ) gave a Z‐substituted dithioalkene. No E‐substituted dithioalkene was formed in this reaction. The palladium‐catalyzed bisthiolation polymerization of a diethynyl disulfide derivative, 1a , in benzene, was carried out to give a hyperbranched polymer ( 5a ) containing a Z‐substituted dithioalkene unit after reaction for 4 h at 70 °C. From the gel permeation chromatography analysis (chloroform, PSt standards), the number‐average and weight‐average molecular weights of 5a were found to be 8,100 and 57,000, respectively. The structure of 5a was confirmed by ¹H and ¹³C NMR spectra. The obtained polymer was soluble in common organic solvents such as benzene, acetone, and CHCl₃. Polymerization for more than 5 h gave insoluble products. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3580–3587, 2007     

Tetramethyl guanidine-assisted synthesis and thermal crosslinking of multifunctional benzoxazine monomers based on natural phloretic acid

An efficient strategy to synthesize novel biobased multifunctional benzoxazine compounds was developed using the 1,1,3,3-tetramethyl guanidine (TMG)-triggered esterification of natural phloretic acid with organic halides as a key synthetic step. First, phloretic acid was combined with either aniline or furfurylamine to prepare the corresponding carboxylic acid-functional monobenzoxazine monomer. Next, the use of TMG enabled an efficient esterification of these compounds with di-, tri-, and tetra-functional benzyl bromide compounds at room temperature to afford a series of new multi-benzoxazine monomers tethered to an aromatic core. The effect of the functionality of the monomers on the curing process was analyzed, indicating that the reactivity during the thermally induced ring-opening increases with the number of furan and oxazine rings in the monomers. The resulting thermosets revealed good correlation between the number of oxazine rings in the structure of the monomer and the properties of the crosslinked materials. Furfurylamine-based polybenzoxazines showed improved thermal behavior compared to the aniline-based systems, due to the role of furan rings. All materials showed high T_g, good thermal stability, and promising flame retardancy properties.     

Peculiarities of the thermal polymerization of the complex-bonded acrylamide

Peculiarities of the thermal polymerization of acrylamide bonded in a complex with Co^II, Ni^II, or Cu^II nitrate have been studied by differential scanning calorimetry. The polymerization can occur in the regions prior to the melting of the complex, during melting, or right after it, depending on the rate of heating and the nature of the complexing agent. The effect of the addition of water and inorganic or polymeric powders on the form and character of the polymerization thermograms, which have a complex multimodal structure in the polymerization region, has been studied. The analysis of the results obtained indicates that during heating and melting complexes of a number of structures differing in their polymerization properties are formed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1410–1413, August, 1993.     

Photoinitiated polymerization of methacrylic monomers in a poly(methyl methacrylate) matrix: A comparative study with other matrices (styrene–butadiene–styrene,polystyrene, and polybutadiene)

The kinetics and mechanism of the photoinitiated polymerization of 1,6‐hexanediol dimethacrylate (HDDMA) in a poly(methyl methacrylate) (PMMA) matrix were studied. The maximum double‐bond conversion, the maximum polymerization rate, the intrinsic reactivity, and the kinetic constants for propagation and termination were calculated. For this system, a reaction‐diffusion termination mechanism occurred from the start of the polymerization, and it was predominantly maintained until high monomer concentrations, probably because of the relatively high intermolecular attraction force between the PMMA matrix and HDDMA monomer. In addition, a comparative study of the photoinitiated polymerization of methacrylic monomers in four different polymeric matrices [styrene–butadiene–styrene (SBS), polystyrene (PS), polybutadiene (PB), and PMMA] was carried out. The aggregation state, vitreous or rubbery, of the monomer–matrix system and the intermolecular strength of attraction in the monomer–matrix system and growing macroradical and matrix systems were the principal factors influencing the kinetic and mechanistic behavior of these systems. When PB and SBS were used as matrices, crosslinked polymerized products were obtained as a result of the participation of double bonds of the matrix in the polymerization process (copolymerization). PS sequences in the SBS and PS matrices also took part in the polymerization process through the coupling of the benzylic radical to the growing macroradical. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 120–127, 2002     

Promoting effect of thiophenols on the ring‐opening polymerization of 1,3‐benzoxazine

Thiophenol and p‐nitrothiophenol were evaluated as promoters for the ring opening polymerization of benzoxazine. The ring‐opening polymerization of p‐cresol type monofunctional N‐phenyl benzoxazine 1a with 10 mol % of thiophenols proceeded at 150 °C, leading to the high conversion of 1a more than 95% within 5 h, whereas the polymerization of 1a without thiophenols did not proceed under the same conditions. The promotion effect of the thiophenols on curing of bisphenol‐A type N‐phenyl benzoxazine 1b was also investigated. In the differential scanning calorimetric (DSC) analysis of the polymerization of 1b at 150 °C without using any promoters, an exothermic peak attributable to the ring‐opening reaction of benzoxazine was observed after 8 h. In contrast, in the DSC analysis of the polymerization of 1b with addition 20 mol % of p‐nitrothiophenol, an exothermic peak was observed within 2 h, to clarify the significant promoting effect of p‐nitrothiophenol. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2523–2527     

Synthesis of networked polymer based on ring‐opening addition reaction of 1,3‐benzoxazine with resorcinol

A highly efficient ring‐opening addition reaction of benzoxazine at ambient temperature has been developed with 2‐methylresorcinol as a nucleophilic reagent. In this reaction, 2‐methylresorcinol reacted with two equivalent amount of benzoxazine to give the corresponding 1:2 adduct, demonstrating its potential as a bifunctional nucleophile. Based on this reaction, a new crosslinking system consisting of a polymer bearing benzoxazine moieties in the side chains and 2‐methylresorcinol as a crosslinker has been performed to obtain the corresponding networked polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Exhaustive and partial alkoxylation of polymethylhydrosiloxane by copper‐catalyzed dehydrocoupling with alcohols: Synthesis,crosslinking behavior,and thermal properties of the products

Polymethylhydrosiloxane (PMHS) reacts with aliphatic and aromatic alcohols at room temperature in the presence of [CuH(PPh₃)]₆ complex catalyst to give poly[(methyl) (alkoxy)siloxane]s in high yields. Reactivity of alcohols decreases in the order of p‐methoxyphenol > p‐cresol > phenol > benzyl alcohol > allyl alcohol > ethanol > isopropanol > tert‐butyl alcohol. Partially p‐cresylated polymers, which still retain unreacted Si? H bonds, react further with ethylene glycol or water to form cross‐linked polymers, which, depending on the extent of cross linking, gelate during the cross‐linking process. Propargyl alcohol reacts with PMHS very rapidly to give exhaustively and partially propargyloxylated PMHS. Resulting polymers, upon heating, undergo crosslinking. Partially propargyloxylated polymers display high thermal stability [T_d5 (temperature of 5% weight loss) > 500 °C] as compared with starting PMHS (243 °C) and exhaustively propargyloxylated one (414 °C). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A straightforward strategy for the efficient synthesis of acrylate and phosphine oxide‐containing vegetable oils and their crosslinked materials

Phosphorus‐containing triglycerides were prepared from a new route that involves the singlet oxygen photo‐oxygenation of high oleic sunflower oil and further reduction of the resulting hydroperoxide derivatives to a mixture of secondary allylic alcohols. These allylic alcohols in presence of chlorodiphenylphosphine give allylic phosphinites capable to undergo a [2,3]‐sigmatropic rearrangement leading to tertiary phosphine oxides directly linked to triglyceride in a one‐pot two‐step reaction. The obtained phosphorus‐containing triglycerides with different hydroxyl content were activated to polymerization by acrylation and these acrylate triglycerides were radically crosslinked in presence of different amounts of pentaerythritol tetra‐acrylate. The thermal, dynamic‐mechanical, and flame retardancy properties of the final materials were evaluated. Thermal and thermo‐oxidative degradation was studied by gas chromatography/mass spectrometry, ³¹P HR‐MAS NMR spectroscopy, and scanning electron microscopy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4051–4063, 2009     

Contact bactericides and fungicides on the basis of amino‐functionalized poly(norbornene)s

This study is aimed at investigating the microbiocidal potential of amino‐functionalized poly(norbornenes) in the solid state. A series of norbornene‐type monomers that carry secondary or tertiary amine functions as well as hexyl and dodecyl groups were prepared. Ring‐opening metathesis polymerization was used to prepare homopolymers of the amine bearing monomers and random copolymers of amine‐ and alkyl‐substituted monomers of high average molar mass. The resulting polymers were characterized by nuclear magnetic resonance, thermogravimetry, differential scanning calorimetry, infrared spectroscopy, and contact angle measurements, and their contact biocidal potential was evaluated according to the Japanese Industry standard Z2801. Tested microorganisms comprised Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, Candida albicans, and Aspergillus niger. Microbiocidal activity of selected polymer films against E. coli, S. aureus, and A. niger was found, whereas against C. albicans and P. aeruginosa microbiostatic behavior was observed. Moreover, the most potent copolymer revealed no cytotoxicity rendering a biocidal polymer with potential applications in mammalian‐, and in particular, human‐related fields. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

UV‐ignited frontal polymerization of an epoxy resin

By combining frontal polymerization and radical‐induced cationic polymerization, it was possible to cure thick samples of an epoxy monomer bleached by UV light. The effect of the relative amounts of cationic photoinitiator and radical initiator was thoroughly investigated and was related to the front's velocity and its maximum temperature. The materials obtained were characterized by quantitative conversion also in the deeper layers, not reached by UV light. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2066–2072, 2004     

Poly(arylene ether)s with pendant diphenyl phosphoryl groups: Synthesis,characterization, and thermal properties

A series of poly(arylene ether)s, (PAEs), carrying a pendant diphenyl phosphoryl group were prepared via the nucleophilic aromatic substitution (NAS) reactions of 3,5‐difluorotriphenylphosphine oxide, 6 . The difluoro monomer 6 was synthesized via two‐step reaction sequence and subsequently characterized by ¹H, ¹³C, ¹⁹F, and ³¹P NMR spectroscopy, GC/MS, and elemental analysis. The reactivity of the electrophilic sites in 6 , activated by only a diphenylphosphoryl group located in the meta‐position, in 6 was probed via NMR spectroscopy and model reactions and was determined to be sufficient to undergo typical NAS reactions. High molecular weight, amorphous, organic soluble poly(arylene ether)s, bearing a pendant diphenylphosphoryl group, were prepared via the reaction of 6 with a variety of bis‐phenols under typical NAS conditions. The poly(arylene ether)s were characterized for structure via the use of ¹H, ¹³C, and ³¹P NMR spectroscopy while their thermal properties were evaluated using DSC and TGA analysis. The glass transition temperatures (T_g) of the synthesized PAEs ranged from 143 to 175 °C, while their 5% weight loss temperatures ranged from 467 to 510 °C under nitrogen and from 470 to 526 °C in air. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Thermally Cross‐Linkable Hole Transport Polymers for Solution‐Based Organic Light‐Emitting Diodes

Two thermally cross‐linkable hole transport polymers that contain phenoxazine and triphenylamine moieties, X‐P1 and X‐P2, are developed for use in solution‐processed multi‐stack organic light‐emitting diodes (OLEDs). Both X‐P1 and X‐P2 exhibit satisfactory cross‐linking and optoelectronic properties. The highest occupied molecular orbital (HOMO) levels of X‐P1 and X‐P2 are −5.24 and −5.16 eV, respectively. Solution‐processed super yellow polymer devices (ITO/X‐P1 or X‐P2/PDY‐132/LiF/Al) with X‐P1 or X‐P2 hole transport layers of various thicknesses are fabricated with the aim of optimizing the device characteristics. The fabricated multi‐stack yellow devices containing the newly synthesized hole transport polymers exhibit satisfactory currents and power efficiencies. The optimized X‐P2 device exhibits a device efficiency that is dramatically improved by more than 66% over that of a reference device without an HTL.

     

Functional 1,3‐benzoxazine bearing 4‐pyridyl group: Synthesis and thermally induced polymerization behavior

1,3‐benzoxazine 1 , bearing 4‐pyridyl moiety on the nitrogen atom, was synthesized from p‐cresol, 4‐aminopyridine, and paraformaldehyde. The efficient synthesis was achieved by adding acetic acid to suppress the strong basicity caused by the presence of 4‐aminopyridine derivatives. Upon heating 1 at 180 °C, it underwent the thermally induced ring‐opening polymerization. The resulting polymer was composed of two types of repeating unit, i.e., (1) Mannich‐type one (‐phenol‐CH₂‐NR‐CH₂‐) that can be expected from the general ring‐opening polymerization of conventional benzoxazines and (2) a typical phenolic resin‐type one (‐phenol‐CH₂‐phenol‐) induced by release of 4‐aminopyridine and paraformaldehyde (unit B). Another structural feature of the polymer was that it possessed a benzoxazine moiety at the chain end. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 410–416     

Synthetic pathway to functional block copolymers with pendent triphenylamine and ethynylpyridine: Effect of countercation on anionic polymerization behavior

The block copolymerization of 4,4′‐vinylphenyl‐N,N‐bis(4‐tert‐butylphenyl)benzenamine ( A ) with 2‐(2‐(4‐vinylphenyl)ethynyl)pyridine ( B ) was performed using sec‐butyllithium (s‐BuLi) as an initiator in the absence and presence of potassium tert‐butoxide (KOBu^t) in tetrahydrofuran (THF) at ?78 °C. The block copolymerization was not successful in the absence of KOBu^t, whereas the well‐defined diblock copolymer (poly( A ‐b‐ B )) containing pendent triphenylamine and ethynylpyridine was successfully synthesized in the presence of excess KOBu^t due to the change in the countercation from Li⁺ to K⁺ and the suppression of ion dissociation by the salt common effect. The poly( A ‐b‐ B )s had predictable molecular weights (M_n = 4,900–20,000 g/mol) and narrow molecular weight distributions (M_w/M_n = 1.13–1.15). In addition, the resulting block copolymer showed good solubility and excellent thermal properties. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4233–4239     

Thiol‐functionalized 1,3‐benzoxazine: Preparation and its use as a precursor for highly polymerizable benzoxazine monomers bearing sulfide moiety

We describe a new strategy for preparation of benzoxazine monomers based on in situ preparation of a thiol‐functionalized benzoxazine and successive chemical modification of the thiol moiety. The thiol‐functionalized benzoxazine can be prepared from its precursor bearing two benzoxazine moieties linked by disulfide bond. Reductive cleavage of the disulfide bond of the precursor with using triphenylphosphine as a reducing agent allows successful preparation of the thiol‐functionalized benzoxazine. By performing this reduction process in the presence of epoxides and acrylates, the formation of the thiol moiety and its successive reaction with those electrophiles proceed efficiently to give the corresponding benzoxazines with sulfide moieties. The benzoxazine monomers thus prepared exhibit much higher polymerization ability than those without sulfide moiety. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1448–1457