Chemical synthesis of poly‐γ‐glutamic acid by polycondensation of γ‐glutamic acid dimer: Synthesis and reaction of poly‐γ‐glutamic acid methyl ester

α‐Methyl glutamic acid (L ‐L )‐, (L ‐D )‐, (D ‐L )‐, and (D ‐D )‐γ‐dimers were synthesized from L ‐ and D ‐glutamic acids, and the obtained dimers were subjected to polycondensation with 1‐(3‐dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride and 1‐hydroxybenzotriazole hydrate as condensation reagents. Poly‐γ‐glutamic acid (γ‐PGA) methyl ester with the number‐average molecular weights of 5000∼20,000 were obtained by polycondensation in N,N‐dimethylformamide in 44∼91% yields. The polycondensation of (L ‐L )‐ and (D ‐D )‐dimers afforded the polymers with much larger |[α]_D | compared with the corresponding dimers. The polymer could be transformed into γ‐PGA by alkaline hydrolysis or transesterification into α‐benzyl ester followed by hydrogenation. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 732–741, 2001     

α,α‐Dibromotoluene as a monomer for poly (substituted methylene) synthesis: Magnesium‐mediated polycondensation of α,α‐dibromotoluene and magnesium/copper‐mediated copolycondensation of α,α‐dibromotoluene with 1,6‐dibromohexane

α,α‐Dibromotoluene 1 was found to be polymerized by the reaction with excess Mg to give poly(phenylmethylene)s 2 , whose main chains were partially dehydrogenated to carbon–carbon double bonds (C?C). The C?Cs in 2 can be brominated by treatment with Br₂. The polymerization mechanism was presumed to include the formation of Grignard reagents of various species with benzylic C? Br bonds and the nucleophilic attacks of the Grignard reagents to various compounds with benzylic C? Br bonds. Copolymerization of 1 with dichlorodimethylsilane successfully proceeded. Mg/Cu‐mediated copolycondensation of 1 with 1,6‐dibromohexane proceeded to give polymers that have similar compositions to those of random copolymers of ethylene and styrene. © 2006Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5661–5671, 2006     

Dendron‐like poly(ε‐benzyloxycarbonyl‐L‐lysine)/linear PEO block copolymers: Synthesis,physical characterization,self‐assembly,and drug‐release behavior

Dendron‐like poly(ε‐benzyloxycarbonyl‐L ‐lysine)/linear poly(ethylene oxide) block copolymers (i.e., Dm‐PZLys‐b‐PEO, m = 0 and 3; Dm are the propargyl focal point poly(amido amine) dendrons having 2^m primary amine groups) were for the first time synthesized by combining ring‐opening polymerization (ROP) of ε‐benzyloxycarbonyl‐L ‐lysine N‐carboxyanhydride (Z‐Lys‐NCA) and click chemistry, where Dm‐PZLys homopolypeptides were click conjugated with azide‐terminated PEO. Their molecular structures and physical properties were characterized in detail by FTIR, ¹H NMR, gel permeation chromatography, differential scanning calorimetry, polarized optical microscopy, and wide angle X‐ray diffraction. Both homopolypeptides and copolymers presented a liquid crystalline phase transition for PZLys block, and the transition was irreversible. Moreover, the degree of crystallinity of PEO block within linear copolymers decreased from 96.2% to 20.4% with increasing PZLys composition, whereas that within dendritic copolymers decreased to zero. The secondary conformation of PZLys progressively changed from β‐sheet to α‐helix with increasing the chain length. These copolymers self‐assembled into spherical nanoparticles in aqueous solution, and the anticancer drug doxorubicin‐loaded nanoparticles gave a similar morphology compared with their blank counterparts. The drug‐loaded nanoparticles showed a triphasic drug‐release profile at aqueous pH 7.4 or 5.5 and 37 °C and sustained a longer drug‐release period for about 2 months. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of poly(L‐lactic acid)–poly(ε‐caprolactone) multiblock copolymers by melt polycondensation

An Erratum has been published for this article in J. Polym. Sci. Part A: Polym. Chem. (2004) 42(22) 5845 New multiblock copolymers derived from poly(L‐lactic acid) (PLLA) and poly(ε‐caprolactone) (PCL) were prepared with the coupling reaction between PLLA and PCL oligomers with ? NCO terminals. Fourier transform infrared (FTIR), ¹³C NMR, and differential scanning calorimetry (DSC) were used to characterize the copolymers and the results showed that PLLA and PCL were coupled by the reaction between ? NCO groups at the end of the PCL and ? OH (or ? COOH) groups at the end of the PLLA. DSC data indicated that the different compositions of PLLA and PCL had an influence on the thermal and crystallization properties including the glass‐transition temperature (T_g), melting temperature (T_M), crystallizing temperature (T_c), melting enthalpy (ΔH_m), crystallizing enthalpy (ΔH_c), and crystallinity. Gel permeation chromatography (GPC) was employed to study the effect of the composition of PLLA and PCL and reaction time on the molecular weight and the molecular weight distribution of the copolymers. The weight‐average molecular weight of PLLA–PCL multiblock copolymers was up to 180,000 at a composition of 60% PLLA and 40% PCL, whereas that of the homopolymer of PLLA was only 14,000. A polarized optical microscope was used to observe the crystalline morphology of copolymers; the results showed that all polymers exhibited a spherulitic morphology. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5045–5053, 2004     

Tacticity of poly‐α‐olefins from poly‐1‐hexene to poly‐1‐octadecene

A systematic study of the influence of the α‐olefin size, the catalyst stereospecificity and the reaction temperature was done on the catalytic activity and tacticity of poly‐α‐olefins from 1‐hexene to 1‐octadecene. The metallocenes used were rac‐Et[Ind₂]ZrCl₂ ( 1 ) and Me₂C[Cp(9‐Flu)]ZrCl₂ ( 2 ) to obtain isotactic and syndiotactic polyolefins. Some catalysts giving atactic polymers were also used in order to study all the possible ¹³C NMR pentades. Catalytic activities increased and isotacticity and syndiotacticity decreased with temperature, but no real trend was found with the α‐olefin size. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4744–4753, 2005     

Enlarging the library of poly‐(L‐lysine citramide) polyelectrolytic drug carriers

Poly‐(L ‐lysine citramide) is a degradable drug carrier of the polyelectrolyte type that is composed of citric acid and L ‐lysine building blocks. In a previous work, poly‐(L ‐lysine citramide) was synthesized by the interfacial polycondensation of α‐hydroxy acid protected citryl dichloride with COOH‐protected lysine diamine. Because of head‐to‐head and head‐to‐tail and tail‐to‐tail linkages in the chains as well as various side reactions such as deprotection of the α‐hydroxy acid moieties and intramolecular imide ring formation, a very large family of degradable polyelectrolyte copolymers was obtained. All the members of this family hydrolytically degrade to the same end products. In this study, another route was explored based on the polycondensation of α‐hydroxy acid protected citric acid pentafluorophenyl diesters, namely, citrobenzal dipentafluorophenyl and citrochloral dipentafluorophenyl with N‐N′‐trimethylsilylated COOH‐protected L ‐lysine. The resulting polymers were characterized by IR, NMR, and size exclusion chromatographic analyses. The resulting chain structures and repeat units were identified from these characterizations and are discussed as compared with characteristics exhibited by analogous polymers resulting from interfacial polycondensation. Differences observed at the intermediate stage involving protected polymers were largely erased during the final deprotection stage because of imide formation during final hydrolysis under the selected conditions. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3475–3484, 2001     

Synthesis and Conformation of Star‐Shaped Poly(γ‐benzyl‐L‐glutamate)s on a Cyclotriphosphazene Core

The preparation of star‐shaped poly(γ‐benzyl‐L ‐glutamate)s by the ring‐opening polymerization of N‐carboxy anhydride γ‐benzyl‐L ‐glutamate (BLG‐NCA) with hexakis(4‐aminomethylphenoxy)‐ ( 4 ) and hexakis(4‐aminophenoxy)cyclotriphosphazenes ( 6 ), and the conformation of resulting polymers has been studied. The six amino groups in 4 can initiate the polymerization of BLG‐NCA to give star‐shaped polyglutamates ( 7 ) with narrow molecular weight distributions (M _w/M _n = 1.10–1.33). For the polymerization of BLG‐NCA with 6 , however, a high ratio of [BLG‐MCA]/[ 6 ] was required to obtain star‐shaped polyglutamates ( 8 ). The conformation of 7 changed from a β‐sheet form to a right‐handed α‐helix form, depending on the degree of polymerization per chain (DP _n/6). The helix content of hexa‐armed poly (γ‐benzyl‐L ‐glutamate‐co‐L ‐glutamic acid)s ( 9 ), prepared by partial hydrolysis of 7 , increased significantly compared with that of the corresponding linear analogue ( 10 ). As increasing of helix content of 9 , the fluorescence spectra of 8‐anilino‐1‐naphthalenesulfonic acid (ANS), a fluorescence probe, shifted to a short wavelength accompanied by the enhancement of intensity, suggesting that star‐shaped polymers are liable to form hydrophobic domains. From these results and the structural feature of the cyclotriphosphazene core, the formation of a 3α‐helix bundle structure of polyglutamates on both sides of the phosphazene ring has been suggested.

     

Convenient synthesis of poly(γ‐benzyl‐L‐glutamate) from activated urethane derivatives of γ‐benzyl‐L‐glutamate

A series of activated urethane‐type derivatives of γ‐benzyl‐L ‐glutamate were synthesized, and their potential as monomers for polypeptide synthesis was investigated. The derivatives of the focus of this work were a series of N‐aryloxycarbonyl‐γ‐benzyl‐L ‐glutamate 1 , of which aryl groups were phenyl, 4‐chlorophenyl, and 4‐nitrophenyl. These urethanes 1 were reactive in polar solvents such as dimethylsulfoxide, N,N‐dimethylformamide (DMF), and N,N‐dimethylacetamide (DMAc), and were efficiently converted into poly(γ‐benzyl‐L ‐glutamate) (poly(BLG)) under mild conditions; at 60 °C without addition of any catalyst. Among the three urethanes, that having 4‐nitrophenoxycarbonyl group 1c was the most reactive to give poly(BLG) efficiently, as was expected from the highly electron deficient nature of the nitrophenoxycarbonyl group. On the other hand, the urethane 1a having phenoxycarbonyl group was also efficiently converted into poly(BLG), in spite of the intrinsically less electrophilicity of the phenoxycarbonyl group. In addition, the successful formation of poly(BLG) by the reaction of 1a favored its diluted concentration (0.1 M) much more than 2.0 M, the optimum initial concentration for 1c . ¹H NMR spectroscopic analyses of the reactions in situ revealed that the predominant pathway from 1 to poly(BLG) involved the intramolecular cyclization of 1 into the corresponding N‐carboxyanhydride, with release of phenol and its successive ring‐opening polymerization with release of carbon dioxide. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2649–2657, 2008     

Biodegradable aliphatic thermoplastic polyurethane based on poly(ε‐caprolactone) and L‐lysine diisocyanate

A biodegradable aliphatic thermoplastic polyurethane based on L ‐lysine diisocyanate and 1,4‐butanediol hard block segments, and 2000 g/mol poly(ε‐caprolactone) diol soft block segments was synthesized. The resulting polymer was a tough thermoplastic with ultimate tensile strength of 33 MPa and elongation of 1000%. The polymer displayed classic segmented thermoplastic elastomer morphology with distinct hard block and soft block phases. Thermal and dynamic mechanical analyses determined that the material has a useful service temperature range of around ?40 °C to +40 °C, making it an excellent candidate for low‐temperature elastomer and film applications, and potentially as a material for use in temporary orthopedic implant devices. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2990–3000, 2006     

Aminocyclopentitol Inhibitors of α‐L‐Fucosidases

Aminocyclopentitol analogs of α‐L ‐fucose were synthesized stereoselectively from D ‐ribose. Alkyl substituents were attached at the NH₂ group to mimic the glycosidic leaving group. The resulting (alkylamino)cyclopentitols inhibited α‐L ‐fucosidases selectively with inhibition constants in the range of K_i=10⁻⁷ M . Comparisons with stereoisomers and acyclic analogs showed that this inhibition only occurs with N‐alkyl substitution and proper configuration at the cyclopentane, as expected for transition‐state‐analog‐type inhibition. These observations were supported by molecular‐modeling comparisons between inhibitor and transition state.     

Polypeptide‐based nanocomposite: Structure and properties of poly(L‐lysine)/Na+‐montmorillonite

The feasibility of constructing polymer/clay nanocomposites with polypeptides as the matrix material is shown. Cationic poly‐L‐lysine · HBr (PLL) was reinforced by sodium montmorillonite clay. The PLL/clay nanocomposites were made via the solution‐intercalation film‐casting technique. X‐ray diffraction and transmission electron microscopy data indicated that montmorillonite layers intercalated with PLL chains coexist with exfoliated layers over a wide range of relative PLL/clay compositions. Differential scanning calorimetry suggests that the presence of clay suppresses crystal formation in PLL relative to the neat polypeptide and slightly decreases the PLL melting temperature. Despite lower crystallinity, dynamic mechanical analysis revealed a significant increase in the storage modulus of PLL with an increase in clay loading producing storage modulus magnitudes on par with traditional engineering thermoplastics. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2579–2586, 2002     

Phosgene‐free synthesis of polypeptides: Useful synthesis for hydrophobic polypeptides through polycondensation of activated urethane derivatives of α‐amino acids

We report a useful synthetic method of polypeptides using a series of urethane derivative of α‐amino acids (l ‐leucine, l ‐phenylalanine, l ‐valine, l ‐alanine, l ‐isoleucine, l ‐methionine), which are readily synthesized by N‐carbamoylation of tetrabutylammonium salts of α‐amino acids with diphenyl carbonate. Heating these urethane derivatives in N,N‐dimethylacetamide in the presence of n‐butylamine successfully gave the corresponding polypeptides with well‐defined structures through polycondensation with the elimination of phenol and CO₂. The matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry investigation showed that the resulting polypeptides had an n‐BuNH₂‐incorporated initiating end and an amino group at propagating end. These results strongly indicated that primary amines served as an initiator in this polycondensation system. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3726–3731     

Shear piezoelectricity in single‐wall carbon nanotube/poly(γ‐benzyl‐L‐glutamate) composites

Single‐wall carbon nanotubes (SWCNTs) have been added to high molecular weight poly(γ‐benzyl‐L ‐glutamate), or PBLG, to evaluate their effects on the polymer's shear piezoelectricity. While the addition of SWCNTs increased various PBLG physical properties such as electrical conductivity, dielectric constant, several mechanical properties, and electrostriction coefficient, the shear piezoelectricity remained constant up to a 0.3 wt % SWCNT concentration. The composite crystallinity, orientation, and SWCNT alignment (measured by X‐ray diffraction, birefringence, and polarized Raman spectroscopy, respectively) were found to be constant up to this same concentration, corroborating the shear piezoelectric findings. PBLG composites made with acid‐treated (and therefore less electrically conductive) SWCNTs exhibited similar shear piezoelectric behavior, indicating that neither the SWCNT type, concentration (up to the percolation threshold), nor electrical conductivity influences PBLG shear piezoelectricity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Aggregation behavior of poly(γ‐benzyl‐L‐glutamate)‐b‐polyisoprene‐b‐poly(γ‐benzyl‐L‐glutamate) rod‐coil‐rod triblock copolymer in N,N‐dimethylformamide

Solution property of poly(γ‐benzyl‐L ‐glutamate)‐b‐polyisoprene‐b‐poly(γ‐benzyl‐L ‐glutamate) (GIG copolymer) was studied by using dynamic light scattering and static light scattering for N,N‐dimethylformamide (DMF) solution and DMF/toluene mixed solutions. GIG copolymer proved to aggregate in DMF and under DMF‐rich condition, that is, high‐polar region. The aggregate decreased in size, and completely disappeared under toluene‐rich condition, that is, low‐polar region. The correlation between solubility parameter and aggregate size of GIG copolymer in the DMF/toluene solution systems quantitatively demonstrated how strongly polarity caused by hydrogen bond made an impact on the aggregation behavior. Because the main driving force to the aggregation under DMF‐rich condition originates with polyisoprene (PIP) blocks, the aggregate in DMF is considered to be a core‐shell micelle consisting of flexible PIP core surrounded by rigid poly(γ‐benzyl‐L ‐glutamate) (PBLG) shell. The values of dimensionless parameter ρ, defined as the ratio of radius of gyration 〈S²〉^1/2 to hydrodynamic radius R_H, revealed that a single chain of GIG copolymer had the form of rigid rod with flexibility, that is, once‐broken rod, caused by the incorporation of a flexible PIP chain between two rigid PBLG rods in the DMF/toluene solution system. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1740–1748, 2010     

Influence of Microwave Irradiation on the Lipase‐Catalyzed Ring‐Opening Polymerization of ε‐Caprolactone

Summary: The microwave (MW)‐assisted lipase‐catalyzed ring‐opening polymerization of ε‐caprolactone in boiling solvents was investigated for the first time. In case of boiling toluene or benzene the MW‐assisted reaction proceeded significantly slower compared to oil bath heating. On the other hand, using boiling diethyl ether as solvent, an increase of the polymerization rate due to MW irradiation was found. Yield, molecular weight measurements, and MALDI‐TOF analysis supported the results.

Reactivity of the MW‐assisted ring‐opening polymerization of ε‐caprolactone compared with conventional thermal heating in different solvents.     

The kinetics of polycondensation of α,α′‐dichloro‐p‐xylene with 4,4′‐isopropylidenediphenol using benzyltriethylammonium chloride as a phase‐transfer catalyst

The phase‐transfer catalyzed polycondensation of α,α′‐dichloro‐p‐xylene with 4,4′‐isopropylidenediphenol was carried out using benzylethylammonium chloride in a two‐phase system of an aqueous alkaline solution and benzene at 60 °C under nitrogen atmosphere. The rate of polycondensation was expressed as the combined terms of quaternary onium cation and 4,4′‐isopropylidenediphenolate anion rather than the feed concentration of catalyst and 4,4′‐isopropylidenediphenol. The measured concentrations of hydroxide and chloride anion in the aqueous solution and α,α′‐dichloro‐p‐xylene in the organic phase were used to obtain the reaction rate constant with the integral method, and to analyze the polycondensation mechanism with a cyclic phase‐transfer initiation step in the heterogeneous liquid–liquid system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3059–3066, 2000     

Enzyme‐Responsive Intracellular‐Controlled Release Using Silica Mesoporous Nanoparticles Capped with ε‐Poly‐L‐lysine

The synthesis and characterization of two new capped silica mesoporous nanoparticles for controlled delivery purposes are described. Capped hybrid systems consist of MCM‐41 nanoparticles functionalized on the outer surface with polymer ε‐poly‐L ‐lysine by two different anchoring strategies. In both cases, nanoparticles were loaded with model dye molecule [Ru(bipy)₃]²⁺. An anchoring strategy involved the random formation of urea bonds by the treatment of propyl isocyanate‐functionalized MCM‐41 nanoparticles with the lysine amino groups located on the ε‐poly‐L ‐lysine backbone (solid Ru‐rLys‐S1 ). The second strategy involved a specific attachment through the carboxyl terminus of the polypeptide with azidopropyl‐functionalized MCM‐41 nanoparticles (solid Ru‐tLys‐S1 ). Once synthesized, both nanoparticles showed a nearly zero cargo release in water due to the coverage of the nanoparticle surface by polymer ε‐poly‐L ‐lysine. In contrast, a remarkable payload delivery was observed in the presence of proteases due to the hydrolysis of the polymer’s amide bonds. Once chemically characterized, studies of the viability and the lysosomal enzyme‐controlled release of the dye in intracellular media were carried out. Finally, the possibility of using these materials as drug‐delivery systems was tested by preparing the corresponding ε‐poly‐L ‐lysine capped mesoporous silica nanoparticles loaded with cytotoxic drug camptothecin (CPT), CPT‐rLys‐S1 and CPT‐tLys‐S1 . Cellular uptake and cell‐death induction were studied. The efficiency of both nanoparticles as new potential platforms for cancer treatment was demonstrated.     

Induction and inversion of chirality in poly‐L‐lysine and methyl orange complex

The mechanism of complexation of poly‐L‐lysine (PLL) with methyl orange (MO) and the appearance of induced circular dichroism (ICD) were investigated as a function of dye concentration and temperature and compared with that of the PLL‐ethyl orange complex. The formation of stoichiometric complexes with uniform size and intensities of ICDs depended on the length of alkyl groups (methyl and ethyl) as determined from quartz crystal microbalance measurement, absorption spectra, and CD spectra data. Furthermore, at constant PLL concentration, a dependence of the inversion of the ICD on the MO concentration (CMO) was observed in the PLL‐MO complexes, which to our knowledge has not been reported for a constant dye concentration system. The positive ICD in the PLL‐MO complexes observed at CMO lower than 2.0 × 10^?5 M showed reversible changes in response to heating and cooling, whereas the negative ICD in PLL‐MO complexes observed at higher CMO inverted to positive ICD values in response to a decrease in temperature. These results demonstrate the alkyl group substituent in the dye, dye concentration, and temperature play important roles in the formation of PLL‐azo dye complex and ICD appearance. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of α‐Cyclodextrin‐Conjugated Poly(ε‐lysine)s and Their Inclusion Complexation Behavior

Novel functional polymers utilizing specific host/guest interactions were designed by introducing α‐CD host molecules into poly(ε‐lysine) chains as side groups. An interesting phase separation was observed as a result of the inclusion complexation between the polymeric host and 3‐(trimethylsilyl)propionic acid as a model guest in aqueous media. This water‐soluble polymeric host would be useful for various applications, particularly drug delivery, due to its biodegradability, low toxicity, and unique functionality represented as a complexation‐induced phase separation.     

17‐Oxo‐5α‐androstane‐3α,4β‐diyl diacetate and 17‐oxo‐5β‐androstane‐3α,4β‐diyl diacetate

The title compounds, both C₂₃H₃₄O₅, are the 5α and 5β configurations of two diacetate epimers. The 5β‐diacetate crystallizes in an hexagonal structure, unusual for steroid molecules. The unit cell has an accessible solvent volume of 358 ų, responsible for clathrate behaviour. The 5β‐epimer also features some shorter than average bond lengths in the 3α,4β‐acetoxy groups. The conformations of the molecules of both epimers are compared with those obtained through abinitio quantum chemistry calculations. Cohesion of the crystals can be attributed to van der Waals and weak molecular C—H⋯O interactions.